WMWilliam Morrish

William Morrish

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


William Morrish has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Coupled microbeads for unidirectional cascade lasing transfer

    by Zhihong Zhang, William Morrish, Lulu Wang, Heng Gao, Xiaoyuan Liu, Yuanjie Yang, Frank Marsiglio, Alkiviathes Meldrum


  • Functional lasing microcapillaries for surface-specific sensing

    by Z. Zhang, W. Morrish, K. Gardner, S. Yang, Y. Yang, A. Meldrum

    Lasing-based sensors have several advantages over fluorescent devices, specifically related to the high light intensity and narrow mode linewidth that can improve the speed and accuracy of the sensor performance. In this work, a microcapillary-based lasing sensor is demonstrated, in which the lasing wavelengths are sensitive to the surface binding of specific materials. In order to achieve this, we utilized lasing into the “star” and “triangle” modes of a conventional microcapillary and tracked the mode positions after the deposition of a polyelectrolyte tri-layer and the subsequent amide binding of carboxy-functionalized polystyrene microspheres. While the lasing mode spectrum becomes increasingly complicated by the addition of the surface layers, careful mode selection can be used to monitor the layer-by-layer surface binding in a mechanically and optically robust device. For polystyrene microspheres, the detection limits were 9.75 nM based upon the lasing mode shift, which compares favorably with fluorescence-based devices. The methods presented in this work could readily be extended to other surface binding schemes and lasing wavelengths, showing that capillary microlasers could be used for many potential applications that capitalize on stable lasing-based detection methods.


  • Open Access

    Wide-gamut lasing from a single organic chromophore

    by S. Lane, S. Vagin, H. Wang, W. R. Heinz, W. Morrish, Y. Zhao, B. Rieger, A. Meldrum

    The development of wideband lasing media has deep implications for imaging, sensing, and display technologies. We show that a single chromophore can be engineered to feature wide-gamut fluorescence and lasing throughout the entire visible spectrum and beyond. This exceptional color tuning demonstrates a chemically controlled paradigm for light emission applications with precise color management. Achieving such extensive color control requires a molecular blueprint that yields a high quantum efficiency and a high solubility in a wide variety of liquids and solids while featuring a heterocyclic structure with good steric access to the lone pair electrons. With these requirements in mind, we designed a lasing chromophore that encloses a lasing color space twice as large as the sRGB benchmark. This record degree of color tuning can in principle be adapted to the solid state by incorporating the chromophore into polymer films. By appropriately engineering the base molecular structure, the widest range of lasing wavelengths observed for a conventional gain medium can be achieved, in turn establishing a possible route toward high-efficiency light emitters and lasers with near-perfect chromaticity.


  • Open Access

    Reappraising the Luminescence Lifetime Distributions in Silicon Nanocrystals

    by Matthias Jakob, Amira Aissiou, William Morrish, Frank Marsiglio, Muhammad Islam, Aras Kartouzian, Alkiviathes Meldrum

    The luminescence dynamics in ensembles of nanocrystals are complicated by a variety of processes, including the size-dependence of the radiative and non-radiative rates in inhomogeneous broadened samples and interparticle interactions. This results in a non-exponential decay, which for the specific case of silicon nanocrystals (SiNCs) has been widely modeled with a Kohlrausch or “stretched exponential” (SE) function. We first derive the population decay function for a luminescence decay following exp[− (t/τ)β]. We then compare the distributions and mean times calculated by assuming that either the luminescence decay or the population decay follows this function and show that the results are significantly different for β much below 1. We then apply these two types of SE functions as well as other models to the luminescence decay data from two thermally grown SiNC samples with different mean sizes. The mean lifetimes are strongly dependent on the experimental setup and the chosen fitting model, none of which appears to adequately describe the ensemble decay dynamics. Frequency-resolved spectroscopy (FRS) techniques are then applied to SiNCs in order to extract the lifetime distribution directly. The rate distribution has a half width of ~ 0.5 decades and mainly resembles a somewhat high-frequency-skewed lognormal function. The combination of TRS and FRS methods appear best suited to uncovering the luminescence dynamics of NC materials having a broad emission spectrum.


  • Geometric Resonances for High-Sensitivity Microfluidic Lasing Sensors

    by W. Morrish, N. Riesen, S. Stobie, A. François, A. Meldrum

    Microcapillaries are inherently fluidic sensing platforms that can, under appropriate conditions, support lasing. We propose and demonstrate a lasing microcapillary sensor based on “star” and “triangle” interferences arising from reflection and refraction at the inner and outer microcapillary walls. These interferences lead to distinct modal trajectories that sample the channel medium inside the microcavity structure. Both star and triangle resonances are therefore sensitive to the nature of the channel medium, yielding theoretical and experimental sensitivities significantly exceeding those found for sensors based on conventional whispering-gallery modes. Additional enhancement can be achieved because the two main resonance families shift in an opposite sense, yielding a differential sensitivity that can reach several thousand nanometers per refractive index “unit.” These devices represent a robust, yet easily fabricated optical sensor and capillary-based lasing system for microfluidic sensing.


  • Ultrabright Fluorescent and Lasing Microspheres from a Conjugated Polymer

    by Kirsty Gardner, Maryam Aghajamali, Sergey Vagin, Jennifer Pille, William Morrish, Jonathan G. C. Veinot, Bernhard Rieger, Alkiviathes Meldrum

    Fluorescent microspheres are used for biomarkers, assay substrates, chemical diagnostics, flow cytometry, and biological imaging. These applications demand the highest fluorescence intensity achievable; however, concentration quenching limits the amount of dye that can be practically incorporated in conventional fluorescent microspheres. Conjugated polymers (CPs) can be less susceptible to concentration quenching, suggesting that they can be excellent candidates for a new class of light‐emitting microspheres. Due to their long‐chain‐conjugated backbone, however, CPs can be resistant to forming smoothly curved or spherical structures. Here, strongly fluorescent CP microspheres as large as 100 µm in diameter are synthesized. Whispering gallery modes (WGMs) appear in the fluorescence spectra, and the microspheres show clear evidence of lasing above a threshold pump intensity. These conjugated polymer beads are up to 50 times larger than CP microspheres obtained by other methods, and they exceed the emission intensity of conventional fluorescent microspheres by more than an order of magnitude.


  • Luminescent Capillary‐Based Whispering Gallery Mode Sensors: Crossing the Lasing Threshold

    by A. Meldrum, William Morrish, Stephen Lane, Wanjie Wu, Tanya M. Monro, Alexandre François

    Silicon nanocrystals (Si NCs) present many advantages for sensor applications, including relatively bright and stable luminescence, low‐to‐negligible toxicity, and high physical and chemical robustness. In this work, the efforts in creating capillary‐based sensors from smooth films of oxide‐embedded SiNCs are summarized, and their responses to dye‐doped polymer films are compared. The main method is to form sub‐micrometer luminescent coatings on microcapillary channel walls. The coating must have a high index of refraction so that it can support the luminescence whispering gallery modes (WGMs) which propagate through the film and extend into the channel medium. Using Si NCs, a general refractometric sensing and the detection of layer‐by‐layer polyelectrolyte deposition on the capillary channel are demonstrated. The Si NC sensors are exceptionally robust and can be cleaned and re‐used multiple times. The main limitation of the method currently involves the relatively slow detection (requiring typically more than 20 s per collected luminescence spectrum) due to the low light levels associated with the Si NC luminescence. Finally, our most recent work is discussed, which aims to extend the luminescent capillary sensor into the lasing regime.


  • Open Access

    Refractometric micro-sensor using a mirrored capillary resonator

    by William Morrish, Peter West, Nathan Orlando, Elizaveta Klantsataya, Kirsty Gardner, Stephen Lane, Raymond Decorby, Alexandre François, Alkiviathes Meldrum

    We report on a flow-through optical sensor consisting of a microcapillary with mirrored channels. Illuminating the structure from the side results in a complicated spectral interference pattern due to the different cavities formed between the inner and outer capillary walls. Using a Fourier transform technique to isolate the desired channel modes and measure their resonance shift, we obtain a refractometric detection limit of (6.3 ± 1.1) x 10−6 RIU near a center wavelength of 600 nm. This simple device demonstrates experimental refractometric sensitivities up to (5.6 ± 0.2) x 102 nm/RIU in the visible spectrum, and it is calculated to reach 1540 nm/RIU with a detection limit of 2.3 x 10−6 RIU at a wavelength of 1.55 µm. These values are comparable to or exceed some of the best Fabry-Perot sensors reported to date. Furthermore, the device can function as a gas or liquid sensor or even as a pressure sensor owing to its high refractometric sensitivity and simple operation.