Shahid Anwar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shahid Anwar has a total of 146 co-authors. Here are the top co-authors by number of shared publications:
- Sharmistha Anwar
Academy of Scientific and Innovative Research (AcSIR)
18 shared publications Sharmistha Anwar
17 shared publications- Pankaj R. Sagdeo
Indian Institute of Technology Indore
10 shared publications - Tanmaya Badapanda
Department of Physics, C.V. Raman Global University, Bhubaneswar, India
10 shared publications N.P. Lalla
U.G.C.-D.A.E. Consortium for Scientific Research, University Campus, Khandwa Road, Indore - 452 001, India
9 shared publicationsBibekananda Nayak
7 shared publications
Latest Publications
- 11 November 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (22)
Phase Evolution, Microstructure, and Electrical Properties of Ca‐Modified BaTiO 3 Perovskite Ceramic for Capacitor Applications
In this research work, we have examined the influence of calcium substitution on the structural, dielectric response, conduction mechanism, and optical properties of BaTiO 3 (BT) ceramic. The in‐depth investigation shows that when the Ca 2+ cations are incorporated, there are noticeable changes in the parent BT's dielectric constant ( ε ′), dielectric loss ( ε ″), and AC conductivity ( σ ac ). Polycrystalline powders of Ba (1− x ) Ca x TiO 3 (BCT, x = 0.1, 0.2, and 0.3) ceramics were produced by the traditional solid‐state reaction method. X‐ray diffraction and scanning electron microscopy analyses were done for structural studies. The dielectric constant and tangent loss were studied in different temperature and frequency ranges. Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, impedance spectroscopy, and dielectric‐temperature studies provided strong evidence of Ca 2+ substitution at the Ba/Ti sites. The electrical conduction behavior of BCT was studied by impedance spectroscopy. The AC conductivity was investigated and described by Jonscher's law. The AC conductivity is found to increase with the increase in Ca content due to the small polaron hopping conduction mechanism between the Ca and Ba ions. NSPT and CBH models were employed to explain the conduction processes in the materials. This study demonstrates effective modifications in structural and dielectric properties, as well as conductivity, through the controlled incorporation of Ca into BT.
- 11 November 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (22)
Phase Evolution, Microstructure, and Electrical Properties of Ca‐Modified BaTiO 3 Perovskite Ceramic for Capacitor Applications
In this research work, we have examined the influence of calcium substitution on the structural, dielectric response, conduction mechanism, and optical properties of BaTiO 3 (BT) ceramic. The in‐depth investigation shows that when the Ca 2+ cations are incorporated, there are noticeable changes in the parent BT's dielectric constant ( ε ′), dielectric loss ( ε ″), and AC conductivity ( σ ac ). Polycrystalline powders of Ba (1− x ) Ca x TiO 3 (BCT, x = 0.1, 0.2, and 0.3) ceramics were produced by the traditional solid‐state reaction method. X‐ray diffraction and scanning electron microscopy analyses were done for structural studies. The dielectric constant and tangent loss were studied in different temperature and frequency ranges. Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, impedance spectroscopy, and dielectric‐temperature studies provided strong evidence of Ca 2+ substitution at the Ba/Ti sites. The electrical conduction behavior of BCT was studied by impedance spectroscopy. The AC conductivity was investigated and described by Jonscher's law. The AC conductivity is found to increase with the increase in Ca content due to the small polaron hopping conduction mechanism between the Ca and Ba ions. NSPT and CBH models were employed to explain the conduction processes in the materials. This study demonstrates effective modifications in structural and dielectric properties, as well as conductivity, through the controlled incorporation of Ca into BT.
- 9 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (33) , 21695-21710
Charge transport mechanism in HfO 2 -modified ZnO composite for NO x gas sensing applications
The development of efficient NO ₓ gas sensors and multifunctional dielectric materials is strongly governed by defect-mediated charge transport in oxide ceramics.
- 9 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (33) , 21695-21710
Charge transport mechanism in HfO 2 -modified ZnO composite for NO x gas sensing applications
The development of efficient NO ₓ gas sensors and multifunctional dielectric materials is strongly governed by defect-mediated charge transport in oxide ceramics.
- 17 January 2026
- Published by Elsevier in Materials Research Bulletin
- Vol. 198
Effect of Mn doping on the structural, impedance and modulus behaviour of lead free (BaCa)(ZrTiO3) ceramics
- 17 January 2026
- Published by Elsevier in Materials Research Bulletin
- Vol. 198
Effect of Mn doping on the structural, impedance and modulus behaviour of lead free (BaCa)(ZrTiO3) ceramics
- 23 October 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 195
Electrospun PVDF-BCZT nanofibers composite for high performance piezoelectric energy harvesting and sensing application
- 23 October 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 195
Electrospun PVDF-BCZT nanofibers composite for high performance piezoelectric energy harvesting and sensing application
- 16 September 2025
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 323
Free-Standing PVDF film for piezoelectric energy harvesting and sensing applications
- 16 September 2025
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 323
Free-Standing PVDF film for piezoelectric energy harvesting and sensing applications
- 15 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (42) , 21460-21480
Excitation-dependent photoluminescence, conduction mechanisms via impedance spectroscopy, and DRT investigations in Al-doped ZnO ceramics
Temperature dependent dielectric, polarization vs. electric field loop, distribution of relaxation times, excitation dependent photoluminescence, and absorbance spectroscopy of Al doped ZnO ceramics.
- 15 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (42) , 21460-21480
Excitation-dependent photoluminescence, conduction mechanisms via impedance spectroscopy, and DRT investigations in Al-doped ZnO ceramics
Temperature dependent dielectric, polarization vs. electric field loop, distribution of relaxation times, excitation dependent photoluminescence, and absorbance spectroscopy of Al doped ZnO ceramics.
- 2 August 2025
- Published by Springer Nature
- p. 505-536
Surface Engineering and Processing via MXene for Corrosion Protection Coatings
- 2 August 2025
- Published by Springer Nature
- p. 505-536
Surface Engineering and Processing via MXene for Corrosion Protection Coatings
- 25 March 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (13)
BaTi0.95Hf0.05O3 Incorporated PVDF Flexible Composite Films for Energy Storage, Harvesting, Sensing, and UV Shielding
Multifunctional piezoelectric devices, capable of sensing force/pressure, harnessing power from changes in human body postures, shielding ultaviolet‐visble (UV–vis light), and storing electrostatic energies, can fulfill the daily requirements of modern lives. Consequently, a novel polyvinylidene difluoride (PVDF)‐barium hafnium titanate (BaTi0.95Hf0.05O3) composite is synthesized. BHT5 comprises a mixture of 42.11% tetragonal and 57.89% orthorhombic phases at room temperature, with a d33 = 193 pC/N. XRD confirms the presence of peaks corresponding to PVDF and BHT5 in the composite films. The fraction of the beta phase increases from 78% to 94% with increases in BHT5 weight percentage (wt.%) from 10% to 40%. The dielectric constant, piezo voltage, current, and power density increase with BHT5 wt.% in composite films. However, a decrease in remanent polarization, saturation polarization, and coercive field is observed with a rise in filler wt.%. PVDF‐BHT5‐40 generates output voltages of 9.3, 12.8, and 5.0 V upon hand tapping, fist beating, and elbow bending, respectively. A maximum of 36.6 V is achieved across a resistance of 0.1 MΩ. PVDF‐BHT5‐40 film generates a 28 V voltage, 31 nA current, and 26.79 µW cm−3 power density upon applying 50 N @5 Hz. Absorbance increases with filler concentration, indicating the efficiency of the composite film to shield UV light.
- 25 March 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (13)
BaTi0.95Hf0.05O3 Incorporated PVDF Flexible Composite Films for Energy Storage, Harvesting, Sensing, and UV Shielding
Multifunctional piezoelectric devices, capable of sensing force/pressure, harnessing power from changes in human body postures, shielding ultaviolet‐visble (UV–vis light), and storing electrostatic energies, can fulfill the daily requirements of modern lives. Consequently, a novel polyvinylidene difluoride (PVDF)‐barium hafnium titanate (BaTi0.95Hf0.05O3) composite is synthesized. BHT5 comprises a mixture of 42.11% tetragonal and 57.89% orthorhombic phases at room temperature, with a d33 = 193 pC/N. XRD confirms the presence of peaks corresponding to PVDF and BHT5 in the composite films. The fraction of the beta phase increases from 78% to 94% with increases in BHT5 weight percentage (wt.%) from 10% to 40%. The dielectric constant, piezo voltage, current, and power density increase with BHT5 wt.% in composite films. However, a decrease in remanent polarization, saturation polarization, and coercive field is observed with a rise in filler wt.%. PVDF‐BHT5‐40 generates output voltages of 9.3, 12.8, and 5.0 V upon hand tapping, fist beating, and elbow bending, respectively. A maximum of 36.6 V is achieved across a resistance of 0.1 MΩ. PVDF‐BHT5‐40 film generates a 28 V voltage, 31 nA current, and 26.79 µW cm−3 power density upon applying 50 N @5 Hz. Absorbance increases with filler concentration, indicating the efficiency of the composite film to shield UV light.