JSJamil Faissal Soni

Jamil Faissal Soni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jamil Faissal Soni has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sacroiliac fixation in pediatric patients: stability analysis by the finite element method

    by Heloisa Faggion, Arthur Rossito, Celso Mendonça, Weverley Valenza, Jamil Soni

    Purpose This study aimed to evaluate, using the finite element method (FEM), the biomechanical stability of a 3.5 mm cannulated screw for sacroiliac fixation of pelvic fractures in children aged ≤ 5 years. Methods A computerized pediatric pelvic model was constructed from a CT scan of a 5-year-old patient. A Torode and Zieg Type IV fracture was simulated and fixed with a 3.5 mm cannulated screw positioned in the oblique S1 corridor. A bipedal support load condition was applied. For FEM analysis, two fixations were tested: one with a 3.5 mm screw (test) and another with a 7.0 mm screw (control). Visual and quantitative assessments of bone fragment displacement, total pelvic displacement, and maximum von Mises stress in the screws were performed. Results Both constructs showed minimal fracture displacement and equivalent stability. The maximum von Mises stress in the 3.5 mm screw was 738 MPa, exceeding the steel alloy limits for plastic deformation and tensile strength, producing a small region of increased surface stress. Conclusion In a FEM-based model, sacroiliac fixation with a 3.5 mm cannulated screw in the oblique S1 safety corridor provided stable fixation of pediatric pelvic fractures up to 5 years of age. Nevertheless, the stress observed could lead to screw failure. Therefore, strict postoperative load restriction is recommended.

  • Novel device for controlled dynamization of tibial fractures: randomized clinical trial

    by Fernando Ferraz Faria, Jamil Faissal Soni, Rodrigo Nunes Rached, Paula Cristina Trevilatto

    Purpose to evaluate the effect of a novel controlled dynamization device attached to external circular fixators on bone healing of tibial fractures. Methods this double-blinded randomized clinical trial evaluated 43 patients over 18 years of age with complex tibial pathologies who were treated without (control) or with a 3D-printed controlled dynamization device attached to external fixators. The devices were installed 60 days after fracture fixation surgery and used for 30 days. All patients were clinically and radiographically followed for up to 8 months to evaluate bone healing. At each monthly evaluation, the radiographs were randomized and evaluated by 3 evaluators. The numbers and frequencies of non-consolidated fractures and the time needed for fracture consolidation in each group were compared (p < 0.05). Results the control group presented a significantly higher number of non-consolidated fractures than the group with controlled dynamization (p = 0.027). The mean times for fracture consolidation for the group submitted to controlled dynamization and for the control group were respectively 4.5 and 6 months. The use of the dynamization device resulted in only 5.2% of complications, while the control group showed a complication rate of 16.6%. Conclusion the novel device for controlled dynamization seems effective in treating complex tibial fractures since it significantly shortened the fracture consolidation time by approximately 30 days and reduced the complication rate.

  • Open Access

    Additive Manufacturing, Thermoplastics, CAD Technology, and Reverse Engineering in Orthopedics and Neurosurgery–Applications to Preventions and Treatment of Infections

    by Gabriel Burato Ortis, Franco Camargo Zapparoli, Leticia Ramos Dantas, Paula Hansen Suss, Jamil Faissal Soni, Celso Júnio Aguiar Mendonça, Gustavo Henrique Loesch, Maíra de Mayo Oliveira Nogueira Loesch, Felipe Francisco Tuon

    The increasing demand for orthopedic and neurosurgical implants has driven advancements in biomaterials, additive manufacturing, and antimicrobial strategies. With an increasingly aging population, and a high incidence of orthopedic trauma in developing countries, the need for effective, biocompatible, and infection-resistant implants is more critical than ever. This review explores the role of polymers in 3D printing for medical applications, focusing on their use in orthopedic and neurosurgical implants. Polylactic acid (PLA), polycaprolactone (PCL), and polyetheretherketone (PEEK) have gained attention due to their biocompatibility, mechanical properties, and potential for antimicrobial modifications. A major challenge in implantology is the risk of periprosthetic joint infections (PJI) and surgical site infections (SSI). Current strategies, such as antibiotic-loaded polymethylmethacrylate (PMMA) spacers and bioactive coatings, aim to reduce infection rates, but limitations remain. Additive manufacturing enables the creation of customized implants with tailored porosity for enhanced osseointegration while allowing for the incorporation of antimicrobial agents. Future perspectives include the integration of artificial intelligence for implant design, nanotechnology for smart coatings, and bioresorbable scaffolds for improved bone regeneration. Advancing these technologies will lead to more efficient, cost-effective, and patient-specific solutions, ultimately reducing infection rates and improving long-term clinical outcomes.


  • Open Access

    Additive Manufacturing, Thermoplastics, CAD Technology and Reverse Engineering in Orthopedics and Neurosurgery – Applications to Preventions and Treatment of Infections

    by Gabriel Burato Ortis, Franco Camargo Zapparoli, Leticia Ramos Dantas, Paula Hansen Suss, Jamil Faissal Soni, Celso Junio Aguiar Mendonca, Gustavo Henrique Loesch, Maíra de Mayo Oliveira Nogueira Loesch, Felipe Francisco Tuon

    The increasing demand for orthopedic and neurosurgical implants has driven ad-vancements in biomaterials, additive manufacturing, and antimicrobial strategies. With a growing aging population and a high incidence of orthopedic trauma in developing countries, the need for effective, biocompatible, and infection-resistant implants is more critical than ever. This review explores the role of polymers in 3D printing for medical applications, focusing on their use in orthopedic and neurosurgical implants. Polylactic acid (PLA), polycaprolactone (PCL), and polyetheretherketone (PEEK) have gained at-tention due to their biocompatibility, mechanical properties, and potential for antimi-crobial modifications. A major challenge in implantology is the risk of periprosthetic joint infections (PJI) and surgical site infections (SSI). Current strategies, such as antibi-otic-loaded polymethylmethacrylate (PMMA) spacers and bioactive coatings, aim to reduce infection rates, but limitations remain. Additive manufacturing enables the cre-ation of customized implants with tailored porosity for enhanced osseointegration while allowing the incorporation of antimicrobial agents. Future perspectives include the in-tegration of artificial intelligence for implant design, nanotechnology for smart coatings, and bioresorbable scaffolds for improved bone regeneration. Advancing these tech-nologies will lead to more efficient, cost-effective, and patient-specific solutions, ultimately reducing infection rates and improving long-term clinical outcomes.


  • Open Access

    PERFIL EPIDEMIOLÓGICO DO TRAUMA MÚSCULO ESQUELÉTICO DURANTE A PANDEMIA DO COVID-19 EM HOSPITAL DE CURITIBA

    by Yuri Brito Shiroma, Augusto Haddad Nicola, Fernando Botelho Darwich, Lucas Dalmaso Pieroni, Luiz Henrique Santos Vezaro, Gabriella Augustin, Alexandre Moreira Senter, Jamil Faissal Soni

    No início da pandemia da COVID-19 foram adotadas medidas para conter o SARS-CoV-2 no Brasil objetivando frear a disseminação do vírus e a sobrecarga da saúde pública foi decretada situação emergencial com reclusão domiciliar em Curitiba. Logo, o Hospital Universitário Cajuru (HUC) foi designado referência no atendimento ao trauma, permitindo que outras instituições hospitalares tivessem leitos exclusivos para COVID-19. O estudo tem o objetivo de valiar o perfil epidemiológico do trauma musculoesquelético antes e durante o isolamento social em Curitiba. Foi realizada um estudo retrospectivo de 5744 atendimentos por trauma músculo esquelético no HUC em dois períodos: entre os dias 16 de março e 16 de abril de 2020, período de maior isolamento em Curitiba com o mesmo período de 2019. Dos 4974 atendimentos elegíveis, 3418 em 2019 e 1556 em 2020, evidencia-se uma redução de 54,5% dos casos de trauma musculo esquelético. Neste estudo a incidência do trauma musculoesquelético reduziu pela metade em números absolutos durante o período de maior isolamento em 2020. Concluímos que no período de isolamento o perfil do trauma mudou de forma significativa em números absolutos, idade e mecanismo do trauma.

  • Open Access

    VANCOMYCIN- AND CHLORHEXIDINE DIGLUCONATE-IMPREGNATED DRESSING FOR THE PREVENTION OF ORTHOPEDIC SURGICAL SITE INFECTIONS: A PILOT STUDY USING A LOW-COST PROCEDURE

    by Paula Setti Campelo, Arthur Peruzzo Maziero, Marília França Madeira Manfrinato, Leticia Ramos Dantas, Paula Hansen Suss, Jamil Faissal Soni, Felipe Francisco Tuon

    Objective: This study introduces a novel approach by proposing a dressing impregnated with vancomycin and chlorhexidine for postoperative care, specifically targeting patients undergoing orthopedic surgeries. Methods: The research design involved a pilot study with a randomized control group, aiming to evaluate the efficacy and safety of vancomycin with a chlorhexidine dressing (Evidence Level I). Participants received vancomycin and CHG impregnated dressing or non-impregnated dressing during the period from March 2023 to October 2023 in trauma-related surgery in the lower limbs. The sample size was based on convenience, considering the pilot study; even though it was randomized and blinded, this study was not a clinical trial. Results: A total of 12 patients used an impregnated dressing, and nine used the same dressing without impregnation. Despite limitations, including the small sample size and single-center study location, our findings demonstrate the safety of the impregnated dressing in trauma surgeries, indicating potential applicability in broader surgical contexts. Conclusion: In conclusion, this study contributes to the discourse on preventive strategies for SSIs, presenting a pioneering approach with the use of vancomycin and chlorhexidine-impregnated dressings. Future research endeavors, incorporating larger-scale studies and addressing study limitations, are crucial for advancing the understanding and implementation of effective postoperative care strategies. Level of Evidence I; Case-control study.

  • Open Access

    3D printing feasibility of a controlled dynamization device for external circular fixation

    by Bianca Carolina Bankhardt, Fernando Ferraz Faria, Rodrigo Nunes Rached, Jamil Faissal Soni, Paula Cristina Trevilatto


  • Open Access

    Antimicrobial Action of a Biodegradable Thermoplastic Impregnated with Vancomycin for Use in 3D Printing Technology

    by Celso Júnio Aguiar Mendonça, Leticia Ramos Dantas, Jamil Faissal Soni, Felipe Francisco Tuon

    This study explores the potential of vancomycin-impregnated polylactic acid (V-PLA) as a novel biomaterial for orthopedic applications. V-PLA combines the biocompatibility of PLA with the antimicrobial properties of vancomycin, making it a promising candidate for managing orthopedic infections. We conducted a comprehensive assessment of V-PLA, including macroscopic characterization, biomechanical analysis, vancomycin release profiles, antimicrobial activity and antibiofilm effects on Staphylococcus aureus ATCCTM 25923. Filaments of V-PLA were manufactured by combining PLA pellets with vancomycin via extrusion and models produced by 3D printer. A biocompatibility test involved the insertion of PLA into a mouse calvaria model to evaluate the inflammatory response. Our results indicate that V-PLA exhibits a distinct macroscopic appearance and sustained vancomycin release over 28 days, surpassing minimal inhibitory concentrations for most Staphylococcus aureus strains. Moreover, V-PLA demonstrated the ability to prevent biofilm formation, a critical concern in orthopedic implant-related infections. While mechanical strength is identified as a limitation in certain applications, V-PLA's suitability varies depending on the clinical context. The V-PLA was biocompatible with a fibrous capsule similar to other prosthetic implants. This study sheds light on the potential of V-PLA for orthopedic spacers and implants, offering clinicians an innovative approach to infection management. Future research may explore its use in specific anatomical locations and clinical scenarios, advancing the field of orthopedic biomaterials.


  • Evaluation of silver nanoparticle-impregnated PMMA loaded with vancomycin or gentamicin against bacterial biofilm formation

    by Jamil Faissal Soni, Victoria Stadler Tasca Ribeiro, Juliette Cieslinski, Ana Paula de Andrade, Letícia Ramos Dantas, Bruna Zanatta Pereira, Beatriz Martins Rodrigues Carvalho de Almeida, Paula Hansen Suss, Felipe Francisco Tuon


  • Open Access

    Wound Dressing Impregnated with Vancomycin and Chlorhexidine Digluconate in the Prevention of Orthopedic Surgical Site Infections: A Pilot Study Using a Low-Cost Procedu

    by Paula Setti Campelo, Arthur Peruzzo Maziero, Marília França Madeira Manfrinato, Leticia Ramos Dantas, Paula Hansen Suss, Jamil Faissal Soni, Felipe Francisco Tuon

    This study introduces a novel approach by proposing a dressing impregnated with vancomycin and chlorhexidine for postoperative care, specifically targeting patients undergoing orthopedic surgeries. The research design involved a pilot study with a randomized control group, aiming to evaluate the vancomycin with chlorhexidine dressing's efficacy and safety. A total of 12 patients used impregnated dressing and 9 used the same dressing without impregnation. Despite limitations, including the small sample size and single-center study location, our findings demonstrate the safety of the impregnated dressing in trauma surgeries, indicating potential applicability in broader surgical contexts. In conclusion, this study contributes to the discourse on preventive strategies for SSIs, presenting a pioneering approach with the vancomycin and chlorhexidine-impregnated dressing. Future research endeavors, incorporating larger-scale studies and addressing study limitations, are crucial for advancing the understanding and implementation of effective postoperative care strategies.