JCJohn A. Collins

John A. Collins

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


John A. Collins has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Predictable seismic cycles result from structural rupture barriers on oceanic transform faults

    by Jianhua Gong, Wenyuan Fan, Jeffrey J. McGuire, Mark D. Behn, Jessica M. Warren, Emily Roland, Margaret S. Boettcher, John A. Collins, Yajing Liu, Christopher R. German

    Earthquakes of magnitude ( M ) >5.5 on oceanic transform faults (OTFs) repeatedly rupture the same locked patches, sometimes quasiperiodically. These patches are separated by “barriers” that halt earthquake propagation and slip mostly aseismically. However, the physical processes governing this systematic behavior remain unclear. We analyzed two barriers along the Gofar transform fault that have arrested ~15 M 6 earthquakes over the past three decades. Ocean bottom seismometer data indicate that the barriers hosted intense microseismicity before the mainshocks and comprise multistrand faults and transtensional stepovers with 100- to 400-m lateral offset. These characteristics contradict earthquake rupture termination models invoking velocity-strengthening friction or large geometric steps and instead point to damage-enhanced porosity and dilatancy-strengthening mechanisms. By isolating rupture segments, the barriers regulate the quasiperiodic recurrence of OTF earthquakes.


  • Dynamics of Rupture Barriers on Oceanic Transform Faults: Insights From the Westernmost Gofar Transform Fault

    by Wenyuan Fan, Jeffrey J. McGuire, Yajing Liu, Mark D. Behn, Jessica M. Warren, John A. Collins, Margaret S. Boettcher

    Oceanic transform faults (OTFs) accommodate plate motion largely by aseismic slip, with creeping patches arresting rupture of neighboring patches that have recurring moment magnitude 5.5–7.1 earthquakes. The structure and fault‐zone conditions of these barriers remain poorly constrained due to scarce offshore observations, leaving their role in the seismic cycle elusive. Here we use ocean‐bottom seismometer data and a machine‐learning‐enabled workflow to build two 1‐year microearthquake catalogs for the rupture barrier at the westernmost Gofar transform segment (G3) spanning December 2019 to March 2022, totaling more than 150,000 relocated earthquakes. The catalogs resolve four distinct seismicity patches on the barrier and reveal spatially variable fault zone architecture. Frequent, episodic swarms contain compact, migrating earthquake bursts, with some migrations following diffusion‐type time‐distance trends with apparent diffusivities of 2–10 /s. However, seismic burst migration speed scales with burst duration , , which is inconsistent with pure fluid‐diffusion or simple creep transients, implicating an interplay between both processes. Dilatancy likely regulates both creep transients and abundant microearthquakes during the interseismic period on damaged and fluid‐saturated barriers. In addition, dilatancy strengthening may halt large ruptures on adjacent asperities, maintaining a persistent barrier zone. The observed barrier dynamics provide a hydromechanical mechanism that may apply to other aseismic OTF segments globally, distinct from continental faults.


  • Open Access

    Rayleigh Waves From OHANA OBSs in the Northeast Pacific Ocean Reveal Low Deep Shear Velocities and Pervasive Azimuthal Anisotropy

    by Gabi Laske, Grace Atkisson, John A. Collins, Donna K. Blackman

    The 2021–2023 OHANA ocean‐bottom seismometer deployment in the northeast Pacific Ocean provides a rich data set for seismic studies to explore the crust, lithosphere and asthenosphere in a 600 km wide region about 1,500 km northeast of Hawaii, west of the Moonless Mountains. The study area covers mainly 40‐to‐55 Myr‐old Pacific lithosphere. A fundamental question to be addressed is whether this particular area has the signature of typical oceanic lithosphere that has a normal plate cooling history or if there is evidence for plate rejuvenation from a secondary mantle‐dynamic process. We present the analysis of path‐averaged low‐frequency (10–60 mHz) Rayleigh‐wave phase‐velocity curves from earthquake records retrieved for 210 two‐station pairs, and its inversion for depth‐dependent shear velocity, Vs . Forward modeling and the inversion of the average phase velocity indicate lower shear velocities than anticipated for 50‐Myr old lithosphere. Velocities in the mid‐to‐lower lithosphere and in the asthenosphere are 2%–3% lower than expected. We also observe significant and internally consistent azimuthal anisotropy of up to 5%, where the “fast direction” places between the fossil and modern plate motion directions. A preliminary analysis of ambient‐noise cross‐correlation functions reveals similar patterns for the fundamental mode as well as the first overtone.


  • Open Access

    Seismo‐Acoustic Detection and Localization of Iceberg Collapse in Atka Bay, Antarctica

    by G. Averbuch, A. Houstin, D. P. Zitterbart, J. Bonnel, J. A. Collins, J. D. Assink

    On 12 January 2022, an iceberg collapsed at the edge of frozen Atka Bay, Antarctica. The event generated seismic, hydroacoustic, and atmospheric infrasound waves recorded by a local network comprising land‐ and iceshelf‐based seismometers, an underwater hydrophone, and an on‐ice infrasound array. Analysis of the seismic and hydroacoustic data shows that the collapse occurred in at least three stages separated by approximately 16.5 and 8 s. The first stage produced a seismic head wave, a P‐wave, and a Rayleigh wave, and clear hydroacoustic and infrasound arrivals. Later stages were dominated by hydroacoustic and seismic Rayleigh waves. Two localization techniques were benchmarked: azimuthal cross‐bearing and a Bayesian joint inversion based on time‐difference‐of‐arrival. Both approaches accurately located the iceberg within a few hundred meters of its geolocation. These unique observations highlight the value of continuous seismo‐acoustic monitoring for investigating local cryospheric dynamics.


  • Open Access

    Seismo-acoustic detection and localization of iceberg collapse in Atka Bay, Antarctica

    by Gil Averbuch, Aymeric Houstin, Daniel Zitterbart, Julien Bonnel, John A. Collins, Jelle Daniel Assink

    On 12 January 2022, an iceberg collapsed at the edge of frozen Atka Bay, Antarctica. The event generated seismic, hydroacoustic, and atmospheric infrasound waves recorded by a local network comprising land- and ice-based seismometers, an underwater hydrophone, and an on-ice infrasound array. Analysis of the seismic and hydroacoustic data shows that the collapse occurred in at least three stages separated by 16 and 10 s. The first stage produced a head wave, a P body-wave, and a Rayleigh wave, while later stages were dominated by surface waves. Infrasound data reveal multiple overlapping arrivals likely caused by direct propagation and partial atmospheric reflections. Two localization techniques were benchmarked: azimuthal cross-bearing and a Bayesian joint inversion using time differences of arrival. Both approaches accurately located the iceberg within a few hundred meters of its geo-location. These unique observations underscore the value of continuous seismo-acoustic monitoring for investigating local cryopheric dynamics.

  • TOQUES: An Ocean-Bottom Seismometer Dataset on the Central Queen Charlotte Fault, Southeast Alaska

    by Andrew C. Gase, Emily C. Roland, Lindsay L. Worthington, Maureen A. L. Walton, Michael G. Bostock, Mladen R. Nedimović, John A. Collins, Collin C. Brandl, Sarah Jaye Oliva, Tianhaozhe Sun

    Plate boundaries in the oceans are often poorly monitored. Though typically less remote than the deep sea, shallow marine environments with seafloor depths 7 earthquakes. In August 2021, we deployed 28 broadband ocean-bottom seismometers (OBSs) along the central QCF for the “Transform Obliquity along the Queen Charlotte Fault and Earthquake Study” (TOQUES) to investigate fault architecture and local seismicity. Deployment depths varied between 0.2 and 2.5 km below sea level, with half of the instruments deployed in shallow water (<0.5 km depth). We describe the scientific motivations for the TOQUES broadband OBS array, present data metrics, and discuss factors that influence data quality and instrument survival. We show that many opportunities exist for scientific study of shallow marine environments and the solid earth. Despite concerns that shallow water was responsible for the risk of data or instrument loss, direct relationships between instrument success and water depth are inconclusive. Rather, instrument success may be more related to the ability of different instrument designs to withstand shallow-water conditions.


  • CASIE21-OBS: An Open-Access, OBS Controlled-Source Seismic Data Set for Investigating the Structure and Properties of the Cascadia Accretionary Wedge and the Downgoing Explorer-Juan de Fuca-Gorda Plate System

    by Juan Pablo Canales, Nathaniel C. Miller, Wayne Baldwin, Suzanne M. Carbotte, Shuoshuo Han, Brian Boston, Hanchao Jian, John Collins, Dan Lizarralde

    Geological processes at subduction zones and their associated geohazards (e.g., megathrust earthquakes, submarine landslides, tsunamis, and arc volcanism) are, to a large extent, controlled by the structure, physical properties and fluid content of the subducting plate, the accreted sediments, and the overriding plate. In these settings, modern seismic modeling and imaging techniques based on controlled‐source, multicomponent ocean‐bottom seismometer (OBS) data are some of the best tools available for determining the subseafloor elastic properties, which can be linked to the aforementioned properties. Here, we present CASIE21‐OBS, a controlled‐source marine wide‐angle OBS data set recently collected across the Cascadia convergent margin as part of the larger CAscadia Seismic Imaging Experiment 2021 (CASIE21). The main component of CASIE21 is a long‐offset multichannel seismic (MCS) survey of the Cascadia margin conducted in June–July 2021 onboard R/V M.G. Langseth (cruise MGL2104) aiming to characterize the incoming plate, the plate interface geometry and properties, and the overlying sediment stratigraphy and physical properties. CASIE21‐OBS was conducted during R/V M.G. Langseth cruise MGL2103 (May 2021) and R/V Oceanus cruise OC2106A (June–July 2021). It consisted of 63 short‐period four‐component OBSs deployed at a total 120 stations along 10 across‐trench profiles extending from ∼50 km seaward of the deformation front to the continental shelf, and from offshore northern Vancouver Island to offshore southern Oregon. The OBSs recorded the airgun signals of the CASIE21‐MCS survey as well as natural seismicity occurring during the deployment period (24 May 2021 19:00 UTC–9 July 2021 09:00 UTC). The OBS data are archived and available at the Incorporated Research Institutions for Seismology Data Management Center under network code YR_2021 for continuous time series (miniSEED) and identifier 21‐008 for assembled data set (SEG‐Y).


  • Open Access

    Seismological Evidence for Girdled Olivine Lattice‐Preferred Orientation in Oceanic Lithosphere and Implications for Mantle Deformation Processes During Seafloor Spreading

    by J. B. Russell, J. B. Gaherty, H. F. Mark, G. Hirth, L. N. Hansen, D. Lizarralde, J. A. Collins, R. L. Evans

    Seismic anisotropy produced by aligned olivine in oceanic lithosphere offers a window into mid‐ocean ridge (MOR) dynamics. Yet, interpreting anisotropy in the context of grain‐scale deformation processes and strain observed in laboratory experiments and natural olivine samples has proven challenging due to incomplete seismological constraints and length scale differences spanning orders of magnitude. To bridge this observational gap, we estimate an in situ elastic tensor for oceanic lithosphere using co‐located compressional‐ and shear‐wavespeed anisotropy observations at the NoMelt experiment located on ∼70 Ma seafloor. The elastic model for the upper 7 km of the mantle, NoMelt_SPani7, is characterized by a fast azimuth parallel to the fossil‐spreading direction, consistent with corner‐flow deformation fabric. We compare this model with a database of 123 petrofabrics from the literature to infer olivine crystallographic orientations and shear strain accumulated within the lithosphere. Direct comparison to olivine deformation experiments indicates strain accumulation of 250%–400% in the shallow mantle. We find evidence for D‐type olivine lattice‐preferred orientation (LPO) with fast [100] parallel to the shear direction and girdled [010] and [001] crystallographic axes perpendicular to shear. D‐type LPO implies similar amounts of slip on the (010)[100] and (001)[100] easy slip systems during MOR spreading; we hypothesize that grain‐boundary sliding during dislocation creep relaxes strain compatibility, allowing D‐type LPO to develop in the shallow lithosphere. Deformation dominated by dislocation‐accommodated grain‐boundary sliding (disGBS) has implications for in situ stress and grain size during MOR spreading and implies grain‐size dependent deformation, in contrast to pure dislocation creep.


  • Open Access

    Seismological evidence for girdled olivine lattice-preferred orientation in oceanic lithosphere and implications for mantle deformation processes during seafloor spreading

    by Joshua B. Russell, James B. Gaherty, Hannah Mark, Greg Hirth, Lars Hansen, Daniel Lizarralde, John A. Collins, Rob L. Evans

    Seismic anisotropy produced by aligned olivine in oceanic lithosphere offers a window into mid-ocean ridge dynamics. Yet, interpreting anisotropy in the context of grain-scale deformation processes and strain observed in laboratory experiments and natural olivine samples has proven challenging due to incomplete seismological constraints and length scale differences spanning orders of magnitude. To bridge this observational gap, we estimate an in situ elastic tensor for oceanic lithosphere using co-located compressional- and shear-wavespeed anisotropy observations at the NoMelt experiment located on ~70 Ma seafloor. The elastic model for the upper 7 km of the mantle, NoMelt_SPani7, is characterized by a fast azimuth parallel to the fossil-spreading direction, consistent with corner-flow deformation fabric. We compare this model with a database of 123 petrofabrics from the literature to infer olivine crystallographic orientations and shear strain accumulated within the lithosphere. Direct comparison to olivine deformation experiments indicates strain accumulation of 250–400% in the shallow mantle. We find evidence for D-type olivine lattice-preferred orientation (LPO) with fast [100] parallel to the shear direction and girdled [010] and [001] crystallographic axes perpendicular to shear. D-type LPO implies similar amounts of slip on the (010)[100] and (001)[100] easy slip systems during mid-ocean ridge spreading; we hypothesize that grain-boundary sliding during dislocation creep relaxes strain compatibility, allowing D-type LPO to develop in the shallow lithosphere. Deformation dominated by dislocation-accommodated grain-boundary sliding (disGBS) has implications for in situ stress and grain size during mid-ocean ridge spreading and implies grain-size dependent deformation, in contrast to pure dislocation creep.

  • Open Access

    Seismological evidence for girdled olivine lattice-preferred orientation in oceanic lithosphere and implications for mantle deformation processes during seafloor spreading

    by Joshua B. Russell, James B. Gaherty, Hannah Mark, Greg Hirth, Lars Hansen, Daniel Lizarralde, John A. Collins, Rob L. Evans

    Seismic anisotropy produced by aligned olivine in oceanic lithosphere offers a window into mid-ocean ridge dynamics. Yet, interpreting anisotropy in the context of grain-scale deformation processes observed in laboratory and natural olivine samples has proven challenging due to the vast length scale differences. We bridge this observational gap by estimating an in situ elastic tensor for oceanic lithosphere using compressional- and shear-wavespeed anisotropy observations. The elastic model for the upper 7 km of the mantle, NoMelt_SPani7, is characterized by a fast azimuth parallel to the fossil-spreading direction consistent with corner-flow deformation fabric. This model is compared with a database of 123 petrofabrics from the literature to infer olivine crystallographic orientations and shear strain accumulated within the lithosphere. Direct comparison to olivine deformation experiments indicates strain accumulation of 250–400% in the shallow mantle. We find evidence for D-type olivine lattice-preferred orientation (LPO) with fast [100] parallel to the shear direction and girdled [010] and [001] crystallographic axes. D-type LPO implies similar amounts of slip on the (010)[100] and (001)[100] easy slip systems during mid-ocean ridge spreading; we hypothesize that grain boundary sliding during dislocation creep relaxes strain compatibility, allowing D-type LPO to develop in the shallow lithosphere. Deformation dominated by dislocation-accommodated grain-boundary sliding (disGBS) has implications for in situ stress and grain size during mid-ocean ridge spreading and implies grain-size dependent deformation, in contrast to pure dislocation creep.