Umair Sajid Hashmi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Umair Sajid Hashmi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Ali Imran
AI4Networks Research Center, School of Electrical and Computer Engineering, The University of Oklahoma, Norman, OK, USA
6 shared publications Ali Imran
4 shared publications- Sabit Ekin
Texas A&M University
4 shared publications - Adnan Abu-Dayya
Department of Electrical Engineering, Qatar University, Doha, Qatar
3 shared publications - Muhammad Nabeel
AI4Networks Research Center, School of Electrical and Computer Engineering, University of Oklahoma, Tulsa, OK, USA
3 shared publications Ian Robertson
School of Electronic and Electrical Engineering University of Leeds Leeds UK
2 shared publications
Latest Publications
- 11 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (9) , 12099-12112
Efficient Network Slicing for 5G Services in Cloud Fog-RAN Deployment Over WDM Network
Network slicing in fifth generation (5G) radio access network (RAN) enables serving massive network traffic with diverse and stringent quality of service (QoS) requirements. Multiple logical networks can be built using RAN slicing over a single RAN infrastructure. This paper considers three different types of slices that are standardized by third generation partner project (3GPP): ultra-reliable low-latency communication (URLLC), enhanced mobile broadband (eMBB), and massive machine type communication (mMTC). Each slice type has unique requirements for data rate, latency, and reliability. Cloud RAN (C-RAN) was proposed to address the requirements of 5G services, which involves physical separation between the remote radio head (RRH) and baseband unit (BBU) in 2-layers. While C-RAN enables more efficient resource utilization and energy consumption, it limits network scalability. Furthermore, C-RAN is unable to meet the stringent latency demands of URLLC services, as well as the massive fronthaul capacity required for eMBB requests. To address this issue, we propose a novel cloud fog RAN (CF-RAN) over wavelength division multiplexing (WDM) architecture. In CF-RAN over WDM the RAN functions are divided into 3 layers, which include the RRH at layer 1, fog nodes at layer 2, and BBU hotels at layer 3. We employ the emerging fog computing paradigm in optical and wireless networks in this suggested architecture. To facilitate low latency URLLC requests, the fog nodes are located closer to the cell site (CS). We propose an integer linear programming (ILP)-based mathematical model. The model's objective is to decrease the number of active BBU hotels and fog nodes while remaining compliant with practical network restrictions. Furthermore, a low complexity greedy heuristic algorithm is proposed to solve the problem and is compared to the branch & bound (B&B) algorithm, which is assumed to provide an optimal solution with exponential complexity. The proposed 3-layer CF-RAN over WDM architecture achieves a 70% improvement in BBU centralization and a 50% reduction in request blocking when compared to the standard 2-layer architecture.
- 11 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (9) , 12099-12112
Efficient Network Slicing for 5G Services in Cloud Fog-RAN Deployment Over WDM Network
Network slicing in fifth generation (5G) radio access network (RAN) enables serving massive network traffic with diverse and stringent quality of service (QoS) requirements. Multiple logical networks can be built using RAN slicing over a single RAN infrastructure. This paper considers three different types of slices that are standardized by third generation partner project (3GPP): ultra-reliable low-latency communication (URLLC), enhanced mobile broadband (eMBB), and massive machine type communication (mMTC). Each slice type has unique requirements for data rate, latency, and reliability. Cloud RAN (C-RAN) was proposed to address the requirements of 5G services, which involves physical separation between the remote radio head (RRH) and baseband unit (BBU) in 2-layers. While C-RAN enables more efficient resource utilization and energy consumption, it limits network scalability. Furthermore, C-RAN is unable to meet the stringent latency demands of URLLC services, as well as the massive fronthaul capacity required for eMBB requests. To address this issue, we propose a novel cloud fog RAN (CF-RAN) over wavelength division multiplexing (WDM) architecture. In CF-RAN over WDM the RAN functions are divided into 3 layers, which include the RRH at layer 1, fog nodes at layer 2, and BBU hotels at layer 3. We employ the emerging fog computing paradigm in optical and wireless networks in this suggested architecture. To facilitate low latency URLLC requests, the fog nodes are located closer to the cell site (CS). We propose an integer linear programming (ILP)-based mathematical model. The model's objective is to decrease the number of active BBU hotels and fog nodes while remaining compliant with practical network restrictions. Furthermore, a low complexity greedy heuristic algorithm is proposed to solve the problem and is compared to the branch & bound (B&B) algorithm, which is assumed to provide an optimal solution with exponential complexity. The proposed 3-layer CF-RAN over WDM architecture achieves a 70% improvement in BBU centralization and a 50% reduction in request blocking when compared to the standard 2-layer architecture.
- Open Access
- 1 December 2022
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 17 (2) , 153-178
Artificial intelligence meets radar resource management: A comprehensive background and literature review
A multi‐function radar is designed to perform disparate functions, such as surveillance, tracking, fire control, amongst others, within a limited resource (time, frequency, and energy) budget. A radar resource management (RRM) module within a radar system makes decisions on prioritisation, parameter selection, and scheduling of associated tasks. However, optimal RRM algorithms are generally computationally complex and operational radars resort to heuristics. On the other hand, algorithms based on artificial intelligence (AI) have been shown to yield near‐optimal radar resource allocation results at manageable computational complexity. This survey study aims at enabling researchers and practitioners better understand the application of AI in RRM‐related problems by providing a thorough literature review of AI‐based RRM techniques. We first provide background concepts in RRM followed by a brief review of Symbolic‐AI techniques for RRM. We mainly focus on the applications of state‐of‐the‐art machine learning techniques to RRM. We emphasise on the recent findings and their potential within practical RRM scenarios for real‐time resource allocation optimisation. The study concludes with a discussion of open research problems and future research directions in the light of the presented survey.
- 1 December 2022
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 17 (2) , 153-178
Open AccessArtificial intelligence meets radar resource management: A comprehensive background and literature review
A multi‐function radar is designed to perform disparate functions, such as surveillance, tracking, fire control, amongst others, within a limited resource (time, frequency, and energy) budget. A radar resource management (RRM) module within a radar system makes decisions on prioritisation, parameter selection, and scheduling of associated tasks. However, optimal RRM algorithms are generally computationally complex and operational radars resort to heuristics. On the other hand, algorithms based on artificial intelligence (AI) have been shown to yield near‐optimal radar resource allocation results at manageable computational complexity. This survey study aims at enabling researchers and practitioners better understand the application of AI in RRM‐related problems by providing a thorough literature review of AI‐based RRM techniques. We first provide background concepts in RRM followed by a brief review of Symbolic‐AI techniques for RRM. We mainly focus on the applications of state‐of‐the‐art machine learning techniques to RRM. We emphasise on the recent findings and their potential within practical RRM scenarios for real‐time resource allocation optimisation. The study concludes with a discussion of open research problems and future research directions in the light of the presented survey.
- 28 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 9 (1) , 130-145
D-RAN: A DRL-Based Demand-Driven Elastic User-Centric RAN Optimization for 6G & Beyond
With highly heterogeneous application requirements, 6G and beyond cellular networks are expected to be demand-driven, elastic, user-centric, and capable of supporting multiple services. A redesign of the one-size-fits-all cellular architecture is needed to support heterogeneous application needs. While several recent works have proposed user-centric cloud radio access network (UCRAN) architectures, these works do not consider the heterogeneity of application requirements or the mobility of users. Even though significant gains in performance have been reported, the inherent rigidity of these methods limits their ability to meet the quality of service (QoS) expected from future cellular networks. This paper addresses this need by proposing an intelligent, demand-driven, elastic UCRAN architecture capable of providing services to a diverse set of use cases including augmented/virtual reality, high-speed rails, industrial robots, E-health, and more applications. The proposed framework leverages deep reinforcement learning to adjust the size of a user-centered virtual cell based on each application’s heterogeneous requirements. Furthermore, the proposed architecture is adaptable to varying user demands and mobility while performing multi-objective optimization of key network performance indicators (KPIs). Finally, numerical results are presented to validate the convergence, adaptability, and performance of the proposed approach against meta-heuristics and brute-force methods.
- 28 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 9 (1) , 130-145
D-RAN: A DRL-Based Demand-Driven Elastic User-Centric RAN Optimization for 6G & Beyond
With highly heterogeneous application requirements, 6G and beyond cellular networks are expected to be demand-driven, elastic, user-centric, and capable of supporting multiple services. A redesign of the one-size-fits-all cellular architecture is needed to support heterogeneous application needs. While several recent works have proposed user-centric cloud radio access network (UCRAN) architectures, these works do not consider the heterogeneity of application requirements or the mobility of users. Even though significant gains in performance have been reported, the inherent rigidity of these methods limits their ability to meet the quality of service (QoS) expected from future cellular networks. This paper addresses this need by proposing an intelligent, demand-driven, elastic UCRAN architecture capable of providing services to a diverse set of use cases including augmented/virtual reality, high-speed rails, industrial robots, E-health, and more applications. The proposed framework leverages deep reinforcement learning to adjust the size of a user-centered virtual cell based on each application’s heterogeneous requirements. Furthermore, the proposed architecture is adaptable to varying user demands and mobility while performing multi-objective optimization of key network performance indicators (KPIs). Finally, numerical results are presented to validate the convergence, adaptability, and performance of the proposed approach against meta-heuristics and brute-force methods.
- Open Access
- 15 June 2022
- Published by Institution of Engineering and Technology (IET) in IET Communications
- Vol. 16 (13) , 1458-1474
Exploring reconfigurable intelligent surfaces for 6G: State‐of‐the‐art and the road ahead
Reconfigurable intelligent surfaces (RISs) are envisioned to transform the propagation space into a smart radio environment (SRE) to realize the diverse applications of sixth‐generation (6G) wireless communication. By smartly tuning the massive number of elements via controller, an RIS can passively phase‐shift the electromagnetic (EM) waves to enhance the system performance. The absence of radio‐frequency (RF) chains makes RIS an energy‐efficient and cost‐effective solution for future wireless networks. In this paper, the state‐of‐the‐art research on different aspects of RIS‐assisted communication is explored. Specifically, the fundamentals of RIS are first introduced, including the RIS's structure, operating principle, and deployment strategies. The emerging applications of RISs are then comprehensively discussed for 6G wireless networks. In addition, the crucial challenges for RIS‐assisted networks are elaborated, namely, RIS channel state information (CSI) acquisition and passive beamforming optimization. Furthermore, the recent research contributions leveraging the artificial intelligence (AI) based techniques for channel estimation, phase‐shift optimization, and resource allocation in RIS‐assisted networks are presented. Finally, to provide effective guidance for future research, important research directions for realizing RIS‐assisted network are highlighted.
- 15 June 2022
- Published by Institution of Engineering and Technology (IET) in IET Communications
- Vol. 16 (13) , 1458-1474
Open AccessExploring reconfigurable intelligent surfaces for 6G: State‐of‐the‐art and the road ahead
Reconfigurable intelligent surfaces (RISs) are envisioned to transform the propagation space into a smart radio environment (SRE) to realize the diverse applications of sixth‐generation (6G) wireless communication. By smartly tuning the massive number of elements via controller, an RIS can passively phase‐shift the electromagnetic (EM) waves to enhance the system performance. The absence of radio‐frequency (RF) chains makes RIS an energy‐efficient and cost‐effective solution for future wireless networks. In this paper, the state‐of‐the‐art research on different aspects of RIS‐assisted communication is explored. Specifically, the fundamentals of RIS are first introduced, including the RIS's structure, operating principle, and deployment strategies. The emerging applications of RISs are then comprehensively discussed for 6G wireless networks. In addition, the crucial challenges for RIS‐assisted networks are elaborated, namely, RIS channel state information (CSI) acquisition and passive beamforming optimization. Furthermore, the recent research contributions leveraging the artificial intelligence (AI) based techniques for channel estimation, phase‐shift optimization, and resource allocation in RIS‐assisted networks are presented. Finally, to provide effective guidance for future research, important research directions for realizing RIS‐assisted network are highlighted.
- Open Access
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 64601-64617
Assessing Deep Generative Models on Time Series Network Data
To achieve zero touch automation in next generation wireless networks through artificial intelligence (AI), large amounts of training data is required. This training data is publicly unavailable and is a major hindrance in research on AI applications to wireless communication. One solution is using limited real data to generate synthetic data that can be used in lieu of real data. Generative Adversarial Networks (GAN) have been used successfully for this purpose. In this paper, we choose two publicly available GAN - based models and one deep learning - based auto-regressive model. We then compare their performance at generating synthetic time-series wireless network traffic data. We also assess the impact of data scarcity on the generated data quality by varying the level of data available to the models for training. Moreover, in order to assess the usefulness of this generated data, we compare the performance of a gradient boosting regressor trained solely on generated data, real data, and a mix of both at forecasting network traffic. Our experiments show that the GANs perform better than the auto-regressive approach in each aspect considered in this work and forecasting models trained to predict network load based on data generated by these GANs yield error rates comparable to models trained on real data. Finally, augmenting small amounts of real data with generated data leads to minor performance gains in some cases.
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 64601-64617
Open AccessAssessing Deep Generative Models on Time Series Network Data
To achieve zero touch automation in next generation wireless networks through artificial intelligence (AI), large amounts of training data is required. This training data is publicly unavailable and is a major hindrance in research on AI applications to wireless communication. One solution is using limited real data to generate synthetic data that can be used in lieu of real data. Generative Adversarial Networks (GAN) have been used successfully for this purpose. In this paper, we choose two publicly available GAN - based models and one deep learning - based auto-regressive model. We then compare their performance at generating synthetic time-series wireless network traffic data. We also assess the impact of data scarcity on the generated data quality by varying the level of data available to the models for training. Moreover, in order to assess the usefulness of this generated data, we compare the performance of a gradient boosting regressor trained solely on generated data, real data, and a mix of both at forecasting network traffic. Our experiments show that the GANs perform better than the auto-regressive approach in each aspect considered in this work and forecasting models trained to predict network load based on data generated by these GANs yield error rates comparable to models trained on real data. Finally, augmenting small amounts of real data with generated data leads to minor performance gains in some cases.
- Open Access
- 21 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Assessing Deep Generative Models on Time-Series Network Data
This paper explores whether Generative Adversarial Networks (GANs) can produce realistic network load data that can be utilized to train machine learning models in lieu of real data. In this regard, we evaluate the performance of three recent GAN architectures on the Telecom Italia data set across a set of qualitative and quantitative metrics. Our results show that GAN generated synthetic data is indeed similar to real data and forecasting models trained on this data achieve similar performance to those trained on real data.
- 21 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessAssessing Deep Generative Models on Time-Series Network Data
This paper explores whether Generative Adversarial Networks (GANs) can produce realistic network load data that can be utilized to train machine learning models in lieu of real data. In this regard, we evaluate the performance of three recent GAN architectures on the Telecom Italia data set across a set of qualitative and quantitative metrics. Our results show that GAN generated synthetic data is indeed similar to real data and forecasting models trained on this data achieve similar performance to those trained on real data.
- Open Access
- 3 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Exploring Reconfigurable Intelligent Surfaces for 6G: State-of-the-Art and the Road Ahead
Reconfigurable intelligent surfaces (RISs) are envisioned to transform the propagation space into a smart radio environment (SRE) to realize the diverse applications of sixth-generation (6G) wireless communication. By smartly tuning the massive number of elements via controller, an RIS can passively phase-shift the electromagnetic (EM) waves to enhance the system performance. The absence of radio-frequency (RF) chains makes RIS an energy-efficient and cost-effective solution for future wireless networks. In this paper, we explore the state-of-the-art research on different aspects of RIS-assisted communication. Specifically, we first introduce the fundamentals of RIS, including the RIS’s structure, operating principle, and deployment strategies. We then comprehensively discuss the emerging applications of RISs for 6G wireless networks. In addition, we elaborate on the crucial challenges for RIS-assisted networks, namely, RIS channel state information (CSI) acquisition and passive beamforming optimization. Furthermore, we present the recent research contributions leveraging the artificial intelligence (AI) based techniques for channel estimation, phase-shift optimization, and resource allocation in RIS-assisted networks. Finally, to provide effective guidance for future research, we highlight important research directions for realizing RIS-assisted network.
- 3 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessExploring Reconfigurable Intelligent Surfaces for 6G: State-of-the-Art and the Road Ahead
Reconfigurable intelligent surfaces (RISs) are envisioned to transform the propagation space into a smart radio environment (SRE) to realize the diverse applications of sixth-generation (6G) wireless communication. By smartly tuning the massive number of elements via controller, an RIS can passively phase-shift the electromagnetic (EM) waves to enhance the system performance. The absence of radio-frequency (RF) chains makes RIS an energy-efficient and cost-effective solution for future wireless networks. In this paper, we explore the state-of-the-art research on different aspects of RIS-assisted communication. Specifically, we first introduce the fundamentals of RIS, including the RIS’s structure, operating principle, and deployment strategies. We then comprehensively discuss the emerging applications of RISs for 6G wireless networks. In addition, we elaborate on the crucial challenges for RIS-assisted networks, namely, RIS channel state information (CSI) acquisition and passive beamforming optimization. Furthermore, we present the recent research contributions leveraging the artificial intelligence (AI) based techniques for channel estimation, phase-shift optimization, and resource allocation in RIS-assisted networks. Finally, to provide effective guidance for future research, we highlight important research directions for realizing RIS-assisted network.
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 18 (4) , 4042-4062
Embracing Complexity: Agent-Based Modeling for HetNets Design and Optimization via Concurrent Reinforcement Learning Algorithms
Complexity is an inherent property in wireless heterogeneous networks (HetNets). In this paper, we investigate the application of the agent-based modeling (ABM) tool for optimization of complex and dynamic HetNets. The proposed framework contains a diversity of game-theoretic, machine learning, and rule-based algorithms within the same model. We present and analyze a HetNet ABM model that runs parallel reinforcement learning (RL) algorithms for spectrum deployment, interference management, resource allocation, and load balancing at both micro and macrocell levels. In our proposed model, two RL-based algorithms work jointly to manage the co-tier and cross-tier interferences. The macrocell runs the first algorithm to control the transmission power of the small cells. The second RL algorithm is run by small cells to assign the users to the sub-bands with less interference levels. Simultaneously, the user association is decided by the users depending on the available resources at the cells and user preferences. The model is then evaluated under various network load conditions to deduce relationships between the cell loads, aggregate bit rate, latency, and user association. Moreover, the system is assessed in a dynamic network scenario with moving users and is confirmed to possess the ability to attain convergence with sufficient performance levels.
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 18 (4) , 4042-4062
Embracing Complexity: Agent-Based Modeling for HetNets Design and Optimization via Concurrent Reinforcement Learning Algorithms
Complexity is an inherent property in wireless heterogeneous networks (HetNets). In this paper, we investigate the application of the agent-based modeling (ABM) tool for optimization of complex and dynamic HetNets. The proposed framework contains a diversity of game-theoretic, machine learning, and rule-based algorithms within the same model. We present and analyze a HetNet ABM model that runs parallel reinforcement learning (RL) algorithms for spectrum deployment, interference management, resource allocation, and load balancing at both micro and macrocell levels. In our proposed model, two RL-based algorithms work jointly to manage the co-tier and cross-tier interferences. The macrocell runs the first algorithm to control the transmission power of the small cells. The second RL algorithm is run by small cells to assign the users to the sub-bands with less interference levels. Simultaneously, the user association is decided by the users depending on the available resources at the cells and user preferences. The model is then evaluated under various network load conditions to deduce relationships between the cell loads, aggregate bit rate, latency, and user association. Moreover, the system is assessed in a dynamic network scenario with moving users and is confirmed to possess the ability to attain convergence with sufficient performance levels.
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 35 (5) , 256-263
SpiderNet: Spectrally Efficient and Energy Efficient Data Aided Demand Driven Elastic Architecture for 6G
Legacy base station (BS) centric cellular architecture is marked by tight interlock between spectral efficiency (SE) and energy efficiency (EE). That means, unless new degrees of freedom and intelligent dynamic adaptability is added, any significant gain in SE must come at the cost of EE. Even the most predominant approaches for capacity enhancement such as network densification yield gains in SE at the cost of increased energy consumption. Moreover, in future mobile networks, the key challenge is not only the rampantly growing volume of traffic, but also the spatiotemporal variability of the traffic. These observations call for a paradigm shift in the way cellular networks are designed and operated. Therefore, in this work, we propose a new cellular architecture called SpiderNet: Spectrally Efficient and Energy Efficient Data Aided Demand Driven Elastic Architecture for 6G Wireless Networks. The key idea behind SpiderNet is to introduce additional degrees of freedom to relax the tight coupling between the SE and EE and database-aided intelligence to enable dynamic adaptive operation for simultaneous enhancement of both SE and EE. This goal is achieved by shifting the pivot of operation from the rigid always ON BS centric cells to user centric (UC) on demand cells. The SpiderNet architecture consists of a layer of low-density large footprint and database aided control BS underlayed by high-density switchable data BS. This database enables artificial intelligence (AI) powered proactive dynamic orchestration of UC cells to maximize not only SE and EE, but quality of experience (QoE) as well. We also identify the challenges that arise in the practical realization of SpiderNet and propose solutions. Finally, we present a case study that compares SpiderNet performance with legacy HetNets. The results show that compared to current BS centric cellular architecture, SpiderNet can substantially enhance both SE and EE without compromising QoE.
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 35 (5) , 256-263
SpiderNet: Spectrally Efficient and Energy Efficient Data Aided Demand Driven Elastic Architecture for 6G
Legacy base station (BS) centric cellular architecture is marked by tight interlock between spectral efficiency (SE) and energy efficiency (EE). That means, unless new degrees of freedom and intelligent dynamic adaptability is added, any significant gain in SE must come at the cost of EE. Even the most predominant approaches for capacity enhancement such as network densification yield gains in SE at the cost of increased energy consumption. Moreover, in future mobile networks, the key challenge is not only the rampantly growing volume of traffic, but also the spatiotemporal variability of the traffic. These observations call for a paradigm shift in the way cellular networks are designed and operated. Therefore, in this work, we propose a new cellular architecture called SpiderNet: Spectrally Efficient and Energy Efficient Data Aided Demand Driven Elastic Architecture for 6G Wireless Networks. The key idea behind SpiderNet is to introduce additional degrees of freedom to relax the tight coupling between the SE and EE and database-aided intelligence to enable dynamic adaptive operation for simultaneous enhancement of both SE and EE. This goal is achieved by shifting the pivot of operation from the rigid always ON BS centric cells to user centric (UC) on demand cells. The SpiderNet architecture consists of a layer of low-density large footprint and database aided control BS underlayed by high-density switchable data BS. This database enables artificial intelligence (AI) powered proactive dynamic orchestration of UC cells to maximize not only SE and EE, but quality of experience (QoE) as well. We also identify the challenges that arise in the practical realization of SpiderNet and propose solutions. Finally, we present a case study that compares SpiderNet performance with legacy HetNets. The results show that compared to current BS centric cellular architecture, SpiderNet can substantially enhance both SE and EE without compromising QoE.
- 29 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 5 (4) , 1999-2015
Analysis of Area Spectral & Energy Efficiency in a CoMP-Enabled User-Centric Cloud RAN
In this paper, we consider coordinated multipoint transmission (CoMP) by using distributed data base stations (DBSs) in a User-centric Cloud-based Radio Access Network (UCRAN). The creation of non-overlapping virtual cells (or service zones) centered around a user, contrary to traditional cellular architecture, shifts the mode of operation from base station centric “always ON” cells to user-centric “on-demand cells.” In contrast to existing literature, we show that CoMP is only beneficial in network architectures where cell-edge users are present. In a UCRAN architecture, where the cell-edge users are virtually removed due to non-overlapping user-centric cells, the performance gain provided by enabling CoMP is insignificant. We analyze this by performing a comparative performance analysis of UCRAN with different joint transmission schemes of CoMP. We also provide analytical expressions for network-wide coverage probability, area spectral efficiency, and energy efficiency by taking advantage of the stochastic geometry tools. Additionally, we investigate the impact of new degrees of freedom such as the size of the service zones and density of data base station on the spectral and energy efficiencies of CoMP-enabled UCRAN. Extensive Monte Carlo simulations validate the proposed analytical framework as well as provide useful insights into the design of next-generation cellular architectures.
- 29 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 5 (4) , 1999-2015
Analysis of Area Spectral & Energy Efficiency in a CoMP-Enabled User-Centric Cloud RAN
In this paper, we consider coordinated multipoint transmission (CoMP) by using distributed data base stations (DBSs) in a User-centric Cloud-based Radio Access Network (UCRAN). The creation of non-overlapping virtual cells (or service zones) centered around a user, contrary to traditional cellular architecture, shifts the mode of operation from base station centric “always ON” cells to user-centric “on-demand cells.” In contrast to existing literature, we show that CoMP is only beneficial in network architectures where cell-edge users are present. In a UCRAN architecture, where the cell-edge users are virtually removed due to non-overlapping user-centric cells, the performance gain provided by enabling CoMP is insignificant. We analyze this by performing a comparative performance analysis of UCRAN with different joint transmission schemes of CoMP. We also provide analytical expressions for network-wide coverage probability, area spectral efficiency, and energy efficiency by taking advantage of the stochastic geometry tools. Additionally, we investigate the impact of new degrees of freedom such as the size of the service zones and density of data base station on the spectral and energy efficiencies of CoMP-enabled UCRAN. Extensive Monte Carlo simulations validate the proposed analytical framework as well as provide useful insights into the design of next-generation cellular architectures.