XCXiaowang Chen

Xiaowang Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaowang Chen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Utilization of Shaft Voltage Measured From Induction Motor Rolling Bearings for Early Gear Fault Detection

    by Xiaowang Chen, Zengyuan Liu, Zhipeng Feng

    Condition-based maintenance of electric drivetrains relies on effective fault feature revelation. Instead of mounting extra sensors in the drivetrain, the motor itself can be utilized as a built-in fault detector. The shaft voltage of electric motor is essentially coupled with the drivetrain dynamics, thus, can support rotating machinery fault detection. In this work, the theoretical basis and practical performance of the shaft-voltage-based gear fault detection in induction motor drivetrain are studied. First, the shaft voltage signal is analytically modeled, considering common-mode and differential-mode sources, eccentricity and unbalance, rotor slotting effect, and fault excitation. The contained fault modulation signatures are, thus, revealed and further experimentally validated. Second, the practical performance of the shaft-voltage-based early-stage gear fault detection is quantitatively evaluated based on gear run-to-failure test, and six other types of signals are synchronously measured for comparison. Finally, to get rid of the dependency on mounting extra slip rings at shaft ends in the measurement, a novel scheme of shaft voltage measurement is proposed by utilizing the contact and conductive characteristics of the rolling elements in bearings. These results establish a thorough foundation of the shaft-voltage-based gear fault detection, demonstrating its promising merits of both easy accessibility and early-stage fault detection capability.


  • Quantitative Characteristics of the Rotary Machinery Fault Signatures in Induction Motor Stator Current: Modeling and Evaluation

    by Xiaowang Chen, Zhipeng Feng

    Induction motor drivetrains are commonly utilized as the power unit of various industrial equipment. By taking the induction motor itself as a built-in sensor and analyzing the stator current, noncontact health condition monitoring of the rotary machinery in the drivetrain can be realized. Reported works on this topic have qualitatively validated the effectiveness of such technique, yet its applicable boundary has not been quantitatively elaborated. This article analytically models the strength of the rotary machinery fault signatures in stator current based on electromechanical coupling. The correctness of the proposed quantitative model and its nonlinear characteristics are numerically validated via finite-element simulations. Experiments under impulsive load torque oscillation and gear wear degradation further quantitatively evaluate the applicable boundary of the stator-current-based fault detection in real-world applications. The proposed analytical model and the revealed quantitative characteristics can help optimize the utilization of induction motor stator current analysis in the predictive maintenance of induction motor drivetrain.


  • Open Access

    Multi-Band Torsional Vibration Amplitude Demodulation for Planetary Gearbox Fault Diagnosis Under Time-Varying Speed Conditions

    by Xiaowang Chen, Yubo Sun, Ying Zhang, Zhipeng Feng

    Torsional vibration signal analysis is promising for diagnosing gear faults in planetary gearboxes. However, early-stage fault signatures are relatively-weak and may be ignored or wrongly identified in conventional demodulation analysis, especially under time-varying speed conditions. Two main contributions are made in this paper. Firstly, an analytical model of planetary gearbox torsional vibration signal is established, by jointly considering the gear mesh vibration, torsional resonance, and other time-invariant components. The gear fault characteristics under time-varying speeds are accordingly revealed explicitly. Furthermore, inspired by the unique time-frequency structure of the torsional vibration signal, the multi-band torsional vibration amplitude demodulation method is proposed for gear fault feature extraction. The proposed method combines the gear fault features in multiple characteristic frequency bands in torsional vibration signal, so that the influences from adjacent carrier frequencies, independent frequency harmonics and random noises can be eliminated in amplitude demodulation. As a result, the obtained amplitude demodulated order spectrum outperforms conventional envelope order spectrum and narrow-band amplitude demodulated order spectrum in revealing relatively weak gear fault features. Both numerical simulation and laboratory experiments are conducted, to demonstrate the correctness of the established analytical model and the advantages of the proposed multi-band torsional vibration amplitude demodulation method. Localized fault on the sun, planet and ring gears are successfully diagnosed.


  • Planet bearing fault diagnosis via double encoder signal analysis

    by Zhipeng Feng, Tongxin Gao, Xinnan Yu, Ying Zhang, Xiaowang Chen, Yang Yang, Minggang Du


  • Open Access

    Rotating Machinery Fault Diagnosis under Time–Varying Speed Conditions Based on Adaptive Identification of Order Structure

    by Xinnan Yu, Xiaowang Chen, Minggang Du, Yang Yang, Zhipeng Feng

    Rotating machinery fault diagnosis is of key significance for ensuring safe and efficient operation of various industrial equipment. However, under nonstationary operating conditions, the fault–induced characteristic frequencies are often time–varying. Conventional Fourier spectrum analysis is not suitable for revealing time–varying details, and nonstationary fault feature extraction methods are still in desperate need. Order spectrum can reveal the rotational–speed–related time–varying frequency components as spectral peaks in order domain, thus facilitating fault feature extraction under time–varying speed conditions. However, the speed–unrelated frequency components are still nonstationary after angular–domain resampling, thus causing wide–band features and interferences in the order spectrum. To overcome such a drawback, this work proposes a rotating machinery fault diagnosis method based on adaptive separation of time–varying components and order feature extraction. Firstly, the rotational speed is estimated by the multi–order probabilistic approach (MOPA), thus eliminating the inconvenience of installing measurement equipment. Secondly, adaptive separation of the time–varying frequency component is achieved through time–varying filtering and surrogate test. It effectively eliminates interference from irrelevant components and noise. Finally, a high–resolution order spectrum is constructed based on the average amplitude envelope of each mono–component. It does not involve Fourier transform or angular–domain resampling, thus avoiding spectral leakage and resampling errors. By identifying the fault–related spectral peaks in the constructed order spectrum, accurate fault diagnosis can be achieved. The Rényi entropy values of the proposed order spectrum are significantly lower than those of the traditional order spectrum. This result verifies the effective energy concentration and high resolution of the proposed order spectrum. The results of both numerical simulation and lab experiments confirm the effectiveness of the proposed method in accurately presenting the time–varying frequency components for rotating machinery diagnosing faults.


  • Tacholess Speed Estimation for Rotating Machinery Fault Diagnosis of Induction Motor Drivetrain

    by Xiaowang Chen, Zhipeng Feng

    In rotating machinery fault diagnosis, the accurate rotational speed is essential for interpretating the repeating fault-induced characteristics. However, installation of extra tachometer can be costly. The widely used induction motor not only drives the powertrain, but also serves as an embedded tachometer via electromagnetic coupling. Available trials on motor-current-based rotational speed estimation either demand the detailed motor configurations or oversimplify the spectral complexity. In this work, a novel rotational speed estimation method is proposed based on adaptive identification of the speed-related modulation sidebands in the induction motor stator current signal. No motor parameter like the numbers of pole pairs or rotor slots is required, and the rotor rotational speed can be automatically extracted from the numerous spectral peaks. The effectiveness of the proposed method is validated by three stator current datasets measured from different induction motors. The obtained rotational speed supports the diagnoses of gear chipping and shaft misalignment in the drivetrain. The feasibility, accuracy, and efficiency of the proposed rotational speed estimation method are quantitatively evaluated with examples.


  • New Schemes of Induction Motor Electric Signature Analysis for Gear Fault Diagnosis: A Comparative Study

    by Xiaowang Chen, Zhipeng Feng

    Induction motor electric signals contain torsional vibration features of the drivetrain through electro-mechanical coupling. By taking the induction motor itself as a build-in sensor of the drivetrain, gear fault diagnosis can be realized without mounting extra sensors on or even near the geartrain. Such merit is appealing for geartrain working under extreme environment. Available references on this topic mostly focus on stator current signal analysis. However, the relatively-weak gear fault signatures in stator current urge the discoveries of new schemes. In this work, aiming at enhancing the capability of electric-signal-based gear fault diagnosis, four new forms of induction motor electric signal are investigated. A uniform analytical model for current/voltage signals of stator/rotor windings or rotor shaft is established, to elaborate and compare their effectiveness in revealing gear fault signatures. Finite-element numerical simulations and laboratory experiments validate the analytical derivations, and quantitively compare the strength, saliency, monotonicity, and linearity of the contained fault signatures. The results pinpointed the advantages of rotor current/voltage and shaft voltage analyses over the conventional stator current analysis in incipient gear fault diagnosis and fault severity assessment. These explorations aim to motivate and guide the utilization of new forms of electric signals in but not limited to the field of electric drive maintenance.