Xiaodong Chu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaodong Chu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Yutian Liu
Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education (Shandong University), Jinan, China
5 shared publications- Hua Ye
Key Laboratory of Power System Intelligent Dispatch and Control of the Ministry of Education, Shandong University, Jinan, China
4 shared publications Wen Zhang
4 shared publicationsHaoyi Huang
China Energy Engineering Group Zhejiang Electric Power Design Institute Co. Ltd, Hangzhou, China
3 shared publicationsMaosen Tang
State Grid Chengdu Power Supply Company, Chengdu, China
3 shared publications- Yutian Liu
Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education, Shandong University, Jinan, China
3 shared publications
Latest Publications
- Open Access
- 18 September 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 172
Power angle based fault recovery analysis for grid-connected GFM inverters with current limiting
- 18 September 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 172
Open AccessPower angle based fault recovery analysis for grid-connected GFM inverters with current limiting
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 12213-12227
Value Set-Based Method for Solving Stability Boundary of Systems With Uncertain Time Delays
Existing methods for computing stability boundary of systems with multiple uncertain time delays are either conservative or suffer from low computational efficiency. Addressing this challenge, a value set based method is proposed to solve stability boundary for time delays with high efficiency. Firstly, the characteristic quasi-polynomial of the system is constructed in the periodic multiplication between frequency and time delays (FDM) space. Subsequently, the characteristic quasi-polynomial is transformed by the value set approximations, which is then refined through parameter space subdivision to achieve the required accuracy. Finally, the stability boundary is solved by traversing the parameter space with a bisecting step size. This method is characterized by its efficiency without introducing conservativeness, which is achieved through the decreasing step size space traversal. Numerical examples and a case study based on a microgrid with three distributed generators (DGs) that introduce communication delays are served to validate the accuracy and efficiency.
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 12213-12227
Value Set-Based Method for Solving Stability Boundary of Systems With Uncertain Time Delays
Existing methods for computing stability boundary of systems with multiple uncertain time delays are either conservative or suffer from low computational efficiency. Addressing this challenge, a value set based method is proposed to solve stability boundary for time delays with high efficiency. Firstly, the characteristic quasi-polynomial of the system is constructed in the periodic multiplication between frequency and time delays (FDM) space. Subsequently, the characteristic quasi-polynomial is transformed by the value set approximations, which is then refined through parameter space subdivision to achieve the required accuracy. Finally, the stability boundary is solved by traversing the parameter space with a bisecting step size. This method is characterized by its efficiency without introducing conservativeness, which is achieved through the decreasing step size space traversal. Numerical examples and a case study based on a microgrid with three distributed generators (DGs) that introduce communication delays are served to validate the accuracy and efficiency.
- Open Access
- 15 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 107237-107250
State Estimation for Reconfigurable Distribution Systems Using Graph Attention Network
Obtaining the real-time state of the distribution system is the basis for intelligent operation of the power system. With the surge in new energy generation and the volatility in load demands, traditional state estimation methods face significant challenges. The distribution system requires frequent topology reconfigurations to maintain stable operation. However, current data-driven methods typically cater only to specific topologies. To address this issue, a complete distribution system state estimation (DSSE) framework is proposed to adapt to frequent topology reconfigurations. To ensure data quality, a measurement device configuration algorithm using node importance was designed. Then, a convolutional neural network-based topology identification model is utilized to provide real-time topology data to the DSSE, which uses measured data pre-processed by the Gramian corner field. Finally, we use graph attention network to model the DSSE as a node-level regression prediction problem on a graph abstracted from the distribution system. Simulation results on IEEE 33-bus and IEEE 118-bus distribution systems illustrate the feasibility and efficiency of the proposed framework. Further experiments show that the proposed framework has good robustness.
- 15 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 107237-107250
Open AccessState Estimation for Reconfigurable Distribution Systems Using Graph Attention Network
Obtaining the real-time state of the distribution system is the basis for intelligent operation of the power system. With the surge in new energy generation and the volatility in load demands, traditional state estimation methods face significant challenges. The distribution system requires frequent topology reconfigurations to maintain stable operation. However, current data-driven methods typically cater only to specific topologies. To address this issue, a complete distribution system state estimation (DSSE) framework is proposed to adapt to frequent topology reconfigurations. To ensure data quality, a measurement device configuration algorithm using node importance was designed. Then, a convolutional neural network-based topology identification model is utilized to provide real-time topology data to the DSSE, which uses measured data pre-processed by the Gramian corner field. Finally, we use graph attention network to model the DSSE as a node-level regression prediction problem on a graph abstracted from the distribution system. Simulation results on IEEE 33-bus and IEEE 118-bus distribution systems illustrate the feasibility and efficiency of the proposed framework. Further experiments show that the proposed framework has good robustness.
- Open Access
- 22 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 90052-90064
Active Power Coordination for a Large Population of Grid-Forming and Grid-Following Inverters Based on Mean Field Games Theory
In a grid with a high proportion of renewable energy, the coordinated control between grid-forming (GFM) and grid-following (GFL) inverters becomes crucial for maintaining aspects such as frequency and voltage regulation. This paper presents a decentralized competitive power coordination scheme, designed for a large-scale networked inverter system based on the Mean Field Games (MFG) concept. This scheme effectively harmonizes GFM and GFL inverters to achieve both frequency recovery and active power distribution within the distribution network. Each inverter devises its optimal active power control strategy by maximizing a frequency-constrained revenue function. Through the market price, each inverter’s control strategy influences others’ strategies. Importantly, this scheme simplifies the interaction among inverters by averaging the impacts generated by each inverter’s control strategies. For the MFG control scheme, a decentralized policy iteration algorithm is proposed, eliminating the need for information exchange between inverters and significantly decreasing the communication burden. The effectiveness of the proposed control framework is corroborated using the IEEE 33 test system.
- 22 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 90052-90064
Open AccessActive Power Coordination for a Large Population of Grid-Forming and Grid-Following Inverters Based on Mean Field Games Theory
In a grid with a high proportion of renewable energy, the coordinated control between grid-forming (GFM) and grid-following (GFL) inverters becomes crucial for maintaining aspects such as frequency and voltage regulation. This paper presents a decentralized competitive power coordination scheme, designed for a large-scale networked inverter system based on the Mean Field Games (MFG) concept. This scheme effectively harmonizes GFM and GFL inverters to achieve both frequency recovery and active power distribution within the distribution network. Each inverter devises its optimal active power control strategy by maximizing a frequency-constrained revenue function. Through the market price, each inverter’s control strategy influences others’ strategies. Importantly, this scheme simplifies the interaction among inverters by averaging the impacts generated by each inverter’s control strategies. For the MFG control scheme, a decentralized policy iteration algorithm is proposed, eliminating the need for information exchange between inverters and significantly decreasing the communication burden. The effectiveness of the proposed control framework is corroborated using the IEEE 33 test system.
- Open Access
Optimizing Low-Carbon Pathway of China’s Power Supply Structure Using Model Predictive Control
With the increasing severity of climate change, the power industry, as one of the main sources of carbon emissions, is playing an extremely important role in the process of low-carbon energy transformation. The purpose of this paper is to try to find a general method to solve the optimal path for the low-carbon evolution of the power supply structure so as to meet the challenges faced by the low-carbon transformation of the power industry in the future. This paper first uses the capacity coefficient index (CCI) to represent the power generation ability of different technologies and proposes a forecasting method for the CCI of renewable energy generation. In this paper, a two-layer optimization model considering multiple constraints is established and solved using the MPC method. The results show that China’s installed capacity of renewable power could account for more than 50% in 2030, while the carbon emissions will decrease after reaching a peak in 2023. On the premise of ensuring sufficient reserve adjustment capacity of thermal power units, increasing the proportion of renewable energy generation is an important way to realize emission reduction in the power industry.
Open AccessOptimizing Low-Carbon Pathway of China’s Power Supply Structure Using Model Predictive Control
With the increasing severity of climate change, the power industry, as one of the main sources of carbon emissions, is playing an extremely important role in the process of low-carbon energy transformation. The purpose of this paper is to try to find a general method to solve the optimal path for the low-carbon evolution of the power supply structure so as to meet the challenges faced by the low-carbon transformation of the power industry in the future. This paper first uses the capacity coefficient index (CCI) to represent the power generation ability of different technologies and proposes a forecasting method for the CCI of renewable energy generation. In this paper, a two-layer optimization model considering multiple constraints is established and solved using the MPC method. The results show that China’s installed capacity of renewable power could account for more than 50% in 2030, while the carbon emissions will decrease after reaching a peak in 2023. On the premise of ensuring sufficient reserve adjustment capacity of thermal power units, increasing the proportion of renewable energy generation is an important way to realize emission reduction in the power industry.
- Open Access
- 1 June 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 251-258
Low-carbon economic dispatch strategy for renewable integrated power system incorporating carbon capture and storage technology
- 1 June 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 251-258
Open AccessLow-carbon economic dispatch strategy for renewable integrated power system incorporating carbon capture and storage technology
- Open Access
- 8 March 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 544-553
Power balance control of RES integrated power system by deep reinforcement learning with optimized utilization rate of renewable energy
- 8 March 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 544-553
Open AccessPower balance control of RES integrated power system by deep reinforcement learning with optimized utilization rate of renewable energy
- Open Access
Quantifying Topological Flexibility of Active Distribution Networks Based on Community Detection
Active distribution networks (ADNs) provide a flexible platform to integrate various distributed generation sources, among which the intermittent renewable sources impose high operating uncertainty. Topological flexibility of ADNs should be exploited to counter the stochastic operating conditions by modifying the topologies of ADNs. Quantifying the topological flexibility is a vital step to utilize it, which is lacking in previous studies. A quantification method is proposed to measure the topological flexibility of ADNs in this paper. First, the community structures of ADNs are detected to achieve spatial partitions of the networks. Second, an improved spectral clustering algorithm is employed to significantly reduce the dimensionality of the partition space, in which the ADNs are further partitioned using the affinity propagation algorithm. Finally, a topological flexibility metric is defined based on the guiding role of sectionalizing and tie switches within and between communities. The proposed topological flexibility quantification method is a superb approach to the utilization of flexibility resources in distribution networks. Case study results of test ADNs demonstrate the effectiveness and efficiency of the proposed quantification method.
Open AccessQuantifying Topological Flexibility of Active Distribution Networks Based on Community Detection
Active distribution networks (ADNs) provide a flexible platform to integrate various distributed generation sources, among which the intermittent renewable sources impose high operating uncertainty. Topological flexibility of ADNs should be exploited to counter the stochastic operating conditions by modifying the topologies of ADNs. Quantifying the topological flexibility is a vital step to utilize it, which is lacking in previous studies. A quantification method is proposed to measure the topological flexibility of ADNs in this paper. First, the community structures of ADNs are detected to achieve spatial partitions of the networks. Second, an improved spectral clustering algorithm is employed to significantly reduce the dimensionality of the partition space, in which the ADNs are further partitioned using the affinity propagation algorithm. Finally, a topological flexibility metric is defined based on the guiding role of sectionalizing and tie switches within and between communities. The proposed topological flexibility quantification method is a superb approach to the utilization of flexibility resources in distribution networks. Case study results of test ADNs demonstrate the effectiveness and efficiency of the proposed quantification method.
- Open Access
- 20 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1176 (6) , 062053
Wide-area synthetic inertia control of multiple resources incorporating primary frequency control of wind turbines
With a large proportion of renewable energy sources integrated through the power electronics interface, power systems are challenged with decreased inertia threatening the system stability. Synthetic inertia control aims to emulate inertial response of various available resources. A wide-area synthetic inertia control strategy for multiple resources is proposed in this paper. The offshore wind farm composed of DFIG wind turbines is interconnected by the VSC-HVDC link. Synchronous condensers are installed to improve the system dynamic characteristics. Synthetic inertia control is designed for DFIG wind turbines, VSC-HVDC link and synchronous condensers, respectively. Wide-area frequency signal is employed to overcome the limitation of local signal. Primary frequency control support by DFIG wind turbines is incorporated to improve the control effect of the strategy. Simulation results on New England 39-bus system verify the effectiveness of the proposed wide-area synthetic inertia control strategy.
- 20 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1176 (6) , 062053
Open AccessWide-area synthetic inertia control of multiple resources incorporating primary frequency control of wind turbines
With a large proportion of renewable energy sources integrated through the power electronics interface, power systems are challenged with decreased inertia threatening the system stability. Synthetic inertia control aims to emulate inertial response of various available resources. A wide-area synthetic inertia control strategy for multiple resources is proposed in this paper. The offshore wind farm composed of DFIG wind turbines is interconnected by the VSC-HVDC link. Synchronous condensers are installed to improve the system dynamic characteristics. Synthetic inertia control is designed for DFIG wind turbines, VSC-HVDC link and synchronous condensers, respectively. Wide-area frequency signal is employed to overcome the limitation of local signal. Primary frequency control support by DFIG wind turbines is incorporated to improve the control effect of the strategy. Simulation results on New England 39-bus system verify the effectiveness of the proposed wide-area synthetic inertia control strategy.
- Open Access
- 20 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1176 (6) , 062052
Coordinated control of tie switch and soft normally open point for harnessing flexibility in active distribution systems
Integration of renewable energy source (RES) increases the volatility and uncertainty of active distribution systems while the limited line capacity hampers the accommodation of RES. Soft normally open point (SNOP) has the capability to control the power flow between distribution feeders accurately which can mitigate line congestion. SNOP is an effective flexibility resource in active distribution systems. However, currently it is impossible to replace all traditional tie switch by the SNOP considering the high cost of SNOP. In this paper, a coordinated control strategy considering the coexistence of tie switch and SNOP is proposed, in which a bi-level model is built. An index weighing the static insecurity probability is defined as the bridge between the two layers of the bi-level model. By solving the mixed integer nonlinear programming problem, the coordination between tie switch and SNOP is realized accounting for different characteristics of the two types of devices. Simulation results on a 33-bus test system demonstrate the effectiveness of the coordinated control strategy.
- 20 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1176 (6) , 062052
Open AccessCoordinated control of tie switch and soft normally open point for harnessing flexibility in active distribution systems
Integration of renewable energy source (RES) increases the volatility and uncertainty of active distribution systems while the limited line capacity hampers the accommodation of RES. Soft normally open point (SNOP) has the capability to control the power flow between distribution feeders accurately which can mitigate line congestion. SNOP is an effective flexibility resource in active distribution systems. However, currently it is impossible to replace all traditional tie switch by the SNOP considering the high cost of SNOP. In this paper, a coordinated control strategy considering the coexistence of tie switch and SNOP is proposed, in which a bi-level model is built. An index weighing the static insecurity probability is defined as the bridge between the two layers of the bi-level model. By solving the mixed integer nonlinear programming problem, the coordination between tie switch and SNOP is realized accounting for different characteristics of the two types of devices. Simulation results on a 33-bus test system demonstrate the effectiveness of the coordinated control strategy.