Alessandro Tuniz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alessandro Tuniz has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- C. Martijn. de Sterke
The University of Sydney
10 shared publications - Boris T. Kuhlmey
The University of Sydney
8 shared publications C. Martijn de Sterke
Institute of Photonics and Optical Science (IPOS), School of Physics, the University of Sydney, Sydney 2006, NSW, Australia
6 shared publications- Markus Alexander Schmidt
Leibniz Institute of Photonic Technology Jena Germany
6 shared publications - Simon Fleming
Institute of Photonics and Optical Science (IPOS), School of Physics, The University of Sydney, NSW 2006, Australia
5 shared publications Alexander Argyros
School of Physics, University of Sydney, NSW 2006, Australia
4 shared publications
Latest Publications
- Open Access
- 18 August 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Nonperturbative Near-Field Mapping of Terahertz High- Q Resonator Modes
We present a nonperturbative near-field imaging technique to measure the electromagnetic fields of high-quality-factor (high-Q) terahertz (THz) resonators. The method combines a continuous-wave terahertz spectrometer with a near-field photoconductive antenna (PCA) and Hilbert transform analysis, providing an unprecedented capability to access unperturbed evanescent fields with high spatial and spectral resolution. Our method also enables precise experimental measurements of the resonator’s effective refractive index, which is key for a wide range of terahertz device designs. The presented technique is broadly applicable to photonic and electromagnetic resonant systems and is relevant for terahertz sensing, spectroscopy, antennas, and metasurfaces. Overall, the approach establishes a versatile platform for studying and engineering high-Q THz resonators, quintessential building blocks for light–matter interaction in the THz domain.
- 18 August 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Open AccessNonperturbative Near-Field Mapping of Terahertz High- Q Resonator Modes
We present a nonperturbative near-field imaging technique to measure the electromagnetic fields of high-quality-factor (high-Q) terahertz (THz) resonators. The method combines a continuous-wave terahertz spectrometer with a near-field photoconductive antenna (PCA) and Hilbert transform analysis, providing an unprecedented capability to access unperturbed evanescent fields with high spatial and spectral resolution. Our method also enables precise experimental measurements of the resonator’s effective refractive index, which is key for a wide range of terahertz device designs. The presented technique is broadly applicable to photonic and electromagnetic resonant systems and is relevant for terahertz sensing, spectroscopy, antennas, and metasurfaces. Overall, the approach establishes a versatile platform for studying and engineering high-Q THz resonators, quintessential building blocks for light–matter interaction in the THz domain.
- Open Access
- 21 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (44) , 30626-30637
Directional Coupling to a λ/5000 Nanowaveguide
Silicon-based microdevices are considered promising candidates for consolidating several terahertz technologies into a common and practical platform. The practicality stems from the relatively low loss, device compactness, ease of fabrication, and wide range of available passive and active functionalities. Nevertheless, typical device footprints are limited by diffraction to several hundreds of micrometers, which hinders emerging nanoscale applications at terahertz frequencies. While metallic gap modes provide nanoscale terahertz confinement, efficiently coupling to them is difficult. Here, we present and experimentally demonstrate a strategy for efficiently interfacing subterahertz radiation (λ = 1 mm) to a waveguide formed by a nanogap, etched in a gold film, that is 200 nm (λ/5000) wide and up to 4.5 mm long. The design principle relies on phase matching dielectric and nanogap waveguide modes, resulting in efficient directional coupling between them when they are placed side-by-side. Broadband far-field terahertz transmission experiments through the dielectric waveguide reveal a transmission dip near the designed wavelength due to resonant coupling. Near-field measurements on the surface of the gold layer confirm that such a dip is accompanied by a transfer of power to the nanogap, with an estimated coupling efficiency of ∼10%. Our approach efficiently interfaces millimeter waves with nanoscale waveguides in a tailored and controllable manner, with important implications for on-chip nanospectroscopy, telecommunications, and quantum technologies.
- 21 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (44) , 30626-30637
Open AccessDirectional Coupling to a λ/5000 Nanowaveguide
Silicon-based microdevices are considered promising candidates for consolidating several terahertz technologies into a common and practical platform. The practicality stems from the relatively low loss, device compactness, ease of fabrication, and wide range of available passive and active functionalities. Nevertheless, typical device footprints are limited by diffraction to several hundreds of micrometers, which hinders emerging nanoscale applications at terahertz frequencies. While metallic gap modes provide nanoscale terahertz confinement, efficiently coupling to them is difficult. Here, we present and experimentally demonstrate a strategy for efficiently interfacing subterahertz radiation (λ = 1 mm) to a waveguide formed by a nanogap, etched in a gold film, that is 200 nm (λ/5000) wide and up to 4.5 mm long. The design principle relies on phase matching dielectric and nanogap waveguide modes, resulting in efficient directional coupling between them when they are placed side-by-side. Broadband far-field terahertz transmission experiments through the dielectric waveguide reveal a transmission dip near the designed wavelength due to resonant coupling. Near-field measurements on the surface of the gold layer confirm that such a dip is accompanied by a transfer of power to the nanogap, with an estimated coupling efficiency of ∼10%. Our approach efficiently interfaces millimeter waves with nanoscale waveguides in a tailored and controllable manner, with important implications for on-chip nanospectroscopy, telecommunications, and quantum technologies.
- Open Access
- 18 April 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (2)
Coupled mode theory for plasmonic couplers
Photonic integrated circuits play an increasingly important role in several emerging technologies. Their functionality arises from a combination of integrated components, e.g., couplers, splitters, polarization rotators, and wavelength selective filters. Efficient and accurate simulation of these components is crucial for circuit design and optimization. In dielectric systems, design procedures typically rely on coupled-mode theory (CMT) methods, which then guide subsequent refined full-wave calculations. Miniaturization to deep sub-wavelength scales requires the inclusion of lossy plasmonic (metal) components, making optimization more complicated by the interplay between coupling and absorption. Even though CMT is well developed, there is no consensus as to how to rigorously and quantitatively implement it for lossy systems. Here we present an intuitive coupled-mode theory framework for quantitative analysis of dielectric–plasmonic directional and adiabatic couplers, whose large-scale implementation in 3D is prohibitively slow with full-wave methods. This framework relies on adapting existing coupled mode theory approaches by including loss as a perturbation. This approach will be useful in designing dielectric–plasmonic circuits, providing a first reference point for anyone using techniques such as inverse design and deep learning optimization methods.
- 18 April 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (2)
Open AccessCoupled mode theory for plasmonic couplers
Photonic integrated circuits play an increasingly important role in several emerging technologies. Their functionality arises from a combination of integrated components, e.g., couplers, splitters, polarization rotators, and wavelength selective filters. Efficient and accurate simulation of these components is crucial for circuit design and optimization. In dielectric systems, design procedures typically rely on coupled-mode theory (CMT) methods, which then guide subsequent refined full-wave calculations. Miniaturization to deep sub-wavelength scales requires the inclusion of lossy plasmonic (metal) components, making optimization more complicated by the interplay between coupling and absorption. Even though CMT is well developed, there is no consensus as to how to rigorously and quantitatively implement it for lossy systems. Here we present an intuitive coupled-mode theory framework for quantitative analysis of dielectric–plasmonic directional and adiabatic couplers, whose large-scale implementation in 3D is prohibitively slow with full-wave methods. This framework relies on adapting existing coupled mode theory approaches by including loss as a perturbation. This approach will be useful in designing dielectric–plasmonic circuits, providing a first reference point for anyone using techniques such as inverse design and deep learning optimization methods.
- 4 December 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (12) , 4447-4455
Broadband Terahertz Near-Field Excitation and Detection of Silicon Photonic Crystal Modes
- 4 December 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (12) , 4447-4455
Broadband Terahertz Near-Field Excitation and Detection of Silicon Photonic Crystal Modes
- Open Access
Broadband terahertz near-field excitation and detection of silicon photonic crystal modes
Chip-based terahertz (THz) devices are emerging as versatile tools for manipulating mm-wave frequencies in the context of integrated high-speed communication technologies for potential sixth-generation (6G) wireless applications. The characterization of THz devices is typically performed using far-field techniques that provide limited information about the underlying physical mechanisms producing them. As the library of chip-based functionalities expands, e.g., for tailoring the emission and directional propagation properties of THz antennas and waveguides, novel characterization techniques will likely be beneficial for observing subtle effects that are sensitive to a device's structural parameters. Here we present near-field measurements showing the emission properties of a broadband THz emitter placed in the vicinity of a photonic crystal (PHC) slab. These experiments reveal long-predicted emission properties, but which to our knowledge have yet to be experimentally observed at THz frequencies. We demonstrate three distinct effects between 0.3-0.5 THz: (i) field suppression at frequencies corresponding to quasi-TE bandgaps (ii) a frequency-dependent directed emission along two distinct pathways for two neighboring frequencies, resulting in a local field concentration; (iii) a re-direction of the emission, achieved by rotating the PHC with respect to the dipole orientation. Simulations reveal that the observed behavior can be predicted from the underlying band structure. Our results highlight the opportunities that PHCs can potentially provide for alignment-free, chip-based 6G technologies. Our experimental technique extends the applicability realms of THz spectroscopy and will find use for characterizing the THz modes supported by true samples, whose inherent imperfections cannot realistically be accounted for by simulations, particularly in highly dispersive frequency bands.
Open AccessBroadband terahertz near-field excitation and detection of silicon photonic crystal modes
Chip-based terahertz (THz) devices are emerging as versatile tools for manipulating mm-wave frequencies in the context of integrated high-speed communication technologies for potential sixth-generation (6G) wireless applications. The characterization of THz devices is typically performed using far-field techniques that provide limited information about the underlying physical mechanisms producing them. As the library of chip-based functionalities expands, e.g., for tailoring the emission and directional propagation properties of THz antennas and waveguides, novel characterization techniques will likely be beneficial for observing subtle effects that are sensitive to a device's structural parameters. Here we present near-field measurements showing the emission properties of a broadband THz emitter placed in the vicinity of a photonic crystal (PHC) slab. These experiments reveal long-predicted emission properties, but which to our knowledge have yet to be experimentally observed at THz frequencies. We demonstrate three distinct effects between 0.3-0.5 THz: (i) field suppression at frequencies corresponding to quasi-TE bandgaps (ii) a frequency-dependent directed emission along two distinct pathways for two neighboring frequencies, resulting in a local field concentration; (iii) a re-direction of the emission, achieved by rotating the PHC with respect to the dipole orientation. Simulations reveal that the observed behavior can be predicted from the underlying band structure. Our results highlight the opportunities that PHCs can potentially provide for alignment-free, chip-based 6G technologies. Our experimental technique extends the applicability realms of THz spectroscopy and will find use for characterizing the THz modes supported by true samples, whose inherent imperfections cannot realistically be accounted for by simulations, particularly in highly dispersive frequency bands.
- Open Access
- 18 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-8
Subwavelength terahertz imaging via virtual superlensing in the radiating near field
Imaging with resolutions much below the wavelength λ – now common in the visible spectrum – remains challenging at lower frequencies, where exponentially decaying evanescent waves are generally measured using a tip or antenna close to an object. Such approaches are often problematic because probes can perturb the near-field itself. Here we show that information encoded in evanescent waves can be probed further than previously thought, by reconstructing truthful images of the near-field through selective amplification of evanescent waves, akin to a virtual superlens that images the near field without perturbing it. We quantify trade-offs between noise and measurement distance, experimentally demonstrating reconstruction of complex images with subwavelength features down to a resolution of λ/7 and amplitude signal-to-noise ratios < 25dB between 0.18–1.5 THz. Our procedure can be implemented with any near-field probe, greatly relaxes experimental requirements for subwavelength imaging at sub-optical frequencies and opens the door to non-invasive near-field scanning.
- 18 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-8
Open AccessSubwavelength terahertz imaging via virtual superlensing in the radiating near field
Imaging with resolutions much below the wavelength λ – now common in the visible spectrum – remains challenging at lower frequencies, where exponentially decaying evanescent waves are generally measured using a tip or antenna close to an object. Such approaches are often problematic because probes can perturb the near-field itself. Here we show that information encoded in evanescent waves can be probed further than previously thought, by reconstructing truthful images of the near-field through selective amplification of evanescent waves, akin to a virtual superlens that images the near field without perturbing it. We quantify trade-offs between noise and measurement distance, experimentally demonstrating reconstruction of complex images with subwavelength features down to a resolution of λ/7 and amplitude signal-to-noise ratios < 25dB between 0.18–1.5 THz. Our procedure can be implemented with any near-field probe, greatly relaxes experimental requirements for subwavelength imaging at sub-optical frequencies and opens the door to non-invasive near-field scanning.
- Open Access
Plasmonic Sensors beyond the Phase Matching Condition: A Simplified Approach
The conventional approach to optimising plasmonic sensors is typically based entirely on ensuring phase matching between the excitation wave and the surface plasmon supported by the metallic structure. However, this leads to suboptimal performance, even in the simplest sensor configuration based on the Otto geometry. We present a simplified coupled mode theory approach for evaluating and optimizing the sensing properties of plasmonic waveguide refractive index sensors. It only requires the calculation of propagation constants, without the need for calculating mode overlap integrals. We apply our method by evaluating the wavelength-, device length- and refractive index-dependent transmission spectra for an example silicon-on-insulator-based sensor of finite length. This reveals all salient spectral features which are consistent with full-field finite element calculations. This work provides a rapid and convenient framework for designing dielectric-plasmonic sensor prototypes—its applicability to the case of fibre plasmonic sensors is also discussed.
Open AccessPlasmonic Sensors beyond the Phase Matching Condition: A Simplified Approach
The conventional approach to optimising plasmonic sensors is typically based entirely on ensuring phase matching between the excitation wave and the surface plasmon supported by the metallic structure. However, this leads to suboptimal performance, even in the simplest sensor configuration based on the Otto geometry. We present a simplified coupled mode theory approach for evaluating and optimizing the sensing properties of plasmonic waveguide refractive index sensors. It only requires the calculation of propagation constants, without the need for calculating mode overlap integrals. We apply our method by evaluating the wavelength-, device length- and refractive index-dependent transmission spectra for an example silicon-on-insulator-based sensor of finite length. This reveals all salient spectral features which are consistent with full-field finite element calculations. This work provides a rapid and convenient framework for designing dielectric-plasmonic sensor prototypes—its applicability to the case of fibre plasmonic sensors is also discussed.
- Open Access
Subwavelength terahertz imaging via virtual superlensing in the radiating near field
Paradoxically, imaging with resolution much below the wavelength $\lambda$ - now common place in the visible spectrum - remains challenging at lower frequencies, where arguably it is needed most due to the large wavelengths used. Techniques to break the diffraction limit in microscopy have led to many breakthroughs across sciences, but remain largely confined to the optical spectrum, where near-field coupled fluorophores operate. At lower frequencies, exponentially decaying evanescent waves must be measured directly, requiring a tip or antenna to be brought into very close vicinity to the object. This is often difficult, and can be problematic as the probe can perturb the near-field distribution itself. Here we show the information encoded in evanescent waves can be probed further than previously thought possible, and a truthful image of the near-field reconstructed through selective amplification of evanescent waves - akin to a virtual superlens reversing the evanescent decay. We quantify the trade-off between noise and measurement distance, and experimentally demonstrate reconstruction of complex images with subwavelength features, down to a resolution of $\lambda/7$ and amplitude signal-to-noise ratios below 25dB between 0.18-1.5THz. Our procedure can be implemented with any near field probe far from the reactive near field region, greatly relaxes experimental requirements for subwavelength imaging in particular at sub-optical frequencies, and opens the door to non-perturbing near-field scanning.Open AccessSubwavelength terahertz imaging via virtual superlensing in the radiating near field
Paradoxically, imaging with resolution much below the wavelength $\lambda$ - now common place in the visible spectrum - remains challenging at lower frequencies, where arguably it is needed most due to the large wavelengths used. Techniques to break the diffraction limit in microscopy have led to many breakthroughs across sciences, but remain largely confined to the optical spectrum, where near-field coupled fluorophores operate. At lower frequencies, exponentially decaying evanescent waves must be measured directly, requiring a tip or antenna to be brought into very close vicinity to the object. This is often difficult, and can be problematic as the probe can perturb the near-field distribution itself. Here we show the information encoded in evanescent waves can be probed further than previously thought possible, and a truthful image of the near-field reconstructed through selective amplification of evanescent waves - akin to a virtual superlens reversing the evanescent decay. We quantify the trade-off between noise and measurement distance, and experimentally demonstrate reconstruction of complex images with subwavelength features, down to a resolution of $\lambda/7$ and amplitude signal-to-noise ratios below 25dB between 0.18-1.5THz. Our procedure can be implemented with any near field probe far from the reactive near field region, greatly relaxes experimental requirements for subwavelength imaging in particular at sub-optical frequencies, and opens the door to non-perturbing near-field scanning. - Open Access
- 1 September 2022
- Published by Springer Nature in Nature Photonics
- Vol. 16 (11) , 769-776
In-fibre second-harmonic generation with embedded two-dimensional materials
Silica-based optical fibres are a workhorse of nonlinear optics, providing ready access to a range of nonlinear phenomena including solitons and self-phase modulation. However, they have one fundamental limitation: due to the amorphous nature of silica, they do not exhibit second-order nonlinearity, except for negligible contributions from surfaces. Here we demonstrate second-harmonic generation in functionalized optical fibres by using a monolayer of highly nonlinear MoS2 directly grown on the fibre’s core. The MoS2-functionalized fibre exhibits a second-order susceptibility (χ(2)) value of 44 pm V–1 and a second-harmonic generation conversion efficiency of 0.2 × 10–3 m−2 W−1. This approach is scalable and can be generalized to other transition metal dichalcogenides and a wide range of waveguide systems. Our results demonstrate a new approach towards efficient in-fibre second-harmonic generation sources and may establish a platform for χ(2)-based nonlinear fibre optics, optoelectronics, photonics platforms, integrated optical architectures and active fibre networks.
- 1 September 2022
- Published by Springer Nature in Nature Photonics
- Vol. 16 (11) , 769-776
Open AccessIn-fibre second-harmonic generation with embedded two-dimensional materials
Silica-based optical fibres are a workhorse of nonlinear optics, providing ready access to a range of nonlinear phenomena including solitons and self-phase modulation. However, they have one fundamental limitation: due to the amorphous nature of silica, they do not exhibit second-order nonlinearity, except for negligible contributions from surfaces. Here we demonstrate second-harmonic generation in functionalized optical fibres by using a monolayer of highly nonlinear MoS2 directly grown on the fibre’s core. The MoS2-functionalized fibre exhibits a second-order susceptibility (χ(2)) value of 44 pm V–1 and a second-harmonic generation conversion efficiency of 0.2 × 10–3 m−2 W−1. This approach is scalable and can be generalized to other transition metal dichalcogenides and a wide range of waveguide systems. Our results demonstrate a new approach towards efficient in-fibre second-harmonic generation sources and may establish a platform for χ(2)-based nonlinear fibre optics, optoelectronics, photonics platforms, integrated optical architectures and active fibre networks.
- 1 June 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (6) , 2128-2141
Flexible Terahertz Photonic Light-Cage Modules for In-Core Sensing and High Temperature Applications
- 1 June 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (6) , 2128-2141
Flexible Terahertz Photonic Light-Cage Modules for In-Core Sensing and High Temperature Applications