Abdul Shafeeuulla Khan
Research Subjects
Abdul Shafeeuulla Khan has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
M. B. Talawar
Energetic Materials Research Division, High Energy Materials Research Laboratory (Defence Research & Development Organization), Pune, India-411 021
4 shared publicationsArun Kanti Sikder
High Energy Materials Research Laboratory (Defence Research & Development Organization), Pune, India
3 shared publications- Mahadev B. Talawar
Energetic Materials Research Division, High Energy Materials Research Laboratory (Defence Research & Development Organization), Pune, India
3 shared publications Shaibal Banerjee
Defence Institute of Advanced Technology (Defence Research & Development Organization), Pune, India
3 shared publicationsAmiya Kumar Nandi
Energetic Materials Research Division, High Energy Materials Research Laboratory (Defence Research & Development Organization), Pune, India-411 021
2 shared publicationsArun K. Sider
Energetic Materials Research Division, High Energy Materials Research Laboratory (Defence Research & Development Organization), Pune, India
2 shared publications
Latest Publications
- Open Access
- 19 January 2023
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 25 (5) , 884
Correction: Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study
Correction for ‘Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study’ by Md Abdul Shafeeuulla Khan et al. , CrystEngComm , 2019, 21 , 7519–7527, https://doi.org/10.1039/C9CE01262A.
- 19 January 2023
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 25 (5) , 884
Open AccessCorrection: Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study
Correction for ‘Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study’ by Md Abdul Shafeeuulla Khan et al. , CrystEngComm , 2019, 21 , 7519–7527, https://doi.org/10.1039/C9CE01262A.
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (48) , 7519-7527
Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study
Ammonium perchlorate (AP) is an extensively used crystalline oxidizer in high energy materials and their compositions. A desired morphology of AP is crucial for the high burn rates of solid propellants. We have examined the habit modification of AP crystals in the absence and presence of ethylene glycol as an impurity by means of important parameters such as interaction and surface energies to predict the resultant morphology. On the basis of first principles density functional theory (DFT) calculations of the binding and surface energies before and after the adsorption of the surface-capping agent (ethylene glycol) on the AP surfaces, we have shown that the relative stability of all the important surfaces (100), (101), (011), (001) and (210) rationalize the habit modification of AP crystals. In accordance with the surface energy calculations, the stability order of the five crystallographic surfaces of AP was found to be (001) > (210) > (101) > (100) > (011) in the absence of additive molecules, i.e., in the clean surfaces. This result is in concurrence with the fact that AP crystals richly contain (001) planes when grown in the absence of an additive. The computational methodology applied for the determination of surface energies was found to be reliable as it has well reproduced the stability trend of AP surfaces. However, the trend, (210) > (001) > (101) > (011) > (100), was observed when these surfaces were capped with a known additive molecule, i.e., ethylene glycol. The crystal habit of AP in the presence of ethylene glycol is such that the intensity of the lattice plane (2 1 0) of the modified AP was remarkably high leading to the shape of hexahedral, which is in excellent agreement with the experimental results. A linear fit correlation was also observed between surface energies and interaction energy values for the additive adsorbed AP surfaces.
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (48) , 7519-7527
Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study
Ammonium perchlorate (AP) is an extensively used crystalline oxidizer in high energy materials and their compositions. A desired morphology of AP is crucial for the high burn rates of solid propellants. We have examined the habit modification of AP crystals in the absence and presence of ethylene glycol as an impurity by means of important parameters such as interaction and surface energies to predict the resultant morphology. On the basis of first principles density functional theory (DFT) calculations of the binding and surface energies before and after the adsorption of the surface-capping agent (ethylene glycol) on the AP surfaces, we have shown that the relative stability of all the important surfaces (100), (101), (011), (001) and (210) rationalize the habit modification of AP crystals. In accordance with the surface energy calculations, the stability order of the five crystallographic surfaces of AP was found to be (001) > (210) > (101) > (100) > (011) in the absence of additive molecules, i.e., in the clean surfaces. This result is in concurrence with the fact that AP crystals richly contain (001) planes when grown in the absence of an additive. The computational methodology applied for the determination of surface energies was found to be reliable as it has well reproduced the stability trend of AP surfaces. However, the trend, (210) > (001) > (101) > (011) > (100), was observed when these surfaces were capped with a known additive molecule, i.e., ethylene glycol. The crystal habit of AP in the presence of ethylene glycol is such that the intensity of the lattice plane (2 1 0) of the modified AP was remarkably high leading to the shape of hexahedral, which is in excellent agreement with the experimental results. A linear fit correlation was also observed between surface energies and interaction energy values for the additive adsorbed AP surfaces.
- 26 September 2019
- Published by Taylor & Francis in Journal of Macromolecular Science, Part A
- Vol. 57 (1) , 46-54
Examining the compatibility of energetic plasticizer DNDA-5 with energetic binders
The requirement of developing energetic binders with suitable energetic plasticizers is to enhance the mechanical properties and to reduce glass transition temperature of propellant and explosive formulations. Compatibility of energetic plasticizer 2,4-dinitro-2,4-diazapentane (DNDA-5) with four different energetic binders viz. poly glycidyl nitrate (PGN), poly(3-nitratomethyl-3-methyloxetane) (PLN), glycidyl azide polymer (GAP) and tetra functional glycidyl azide polymer (t-GAP) was studied by using differential scanning calorimeter (DSC) and density functional theory (DFT) methods. Results obtained for the pure binder was compared with the results obtained for binder/plasticizer blend in the parameters of decomposition temperature and the format of the peak which indicated the compatibility or incompatibility of DNDA-5 with the studied binders. Glass transition temperatures of all these blends were determined by low temperature DSC and showed desirable lowering of glass transition temperature with single peak in the case of PLN. The proposed energetic plasticizer DNDA-5 has displayed its compatibility with three binders PGN, PLN and GAP employing thermal techniques. DNDA-5 has been found as incompatible when it is mixed with t-GAP. The predicted relative trend of interaction energies between plasticizer and binder has provided concurrence to results drawn from thermal studies.
- 26 September 2019
- Published by Taylor & Francis in Journal of Macromolecular Science, Part A
- Vol. 57 (1) , 46-54
Examining the compatibility of energetic plasticizer DNDA-5 with energetic binders
The requirement of developing energetic binders with suitable energetic plasticizers is to enhance the mechanical properties and to reduce glass transition temperature of propellant and explosive formulations. Compatibility of energetic plasticizer 2,4-dinitro-2,4-diazapentane (DNDA-5) with four different energetic binders viz. poly glycidyl nitrate (PGN), poly(3-nitratomethyl-3-methyloxetane) (PLN), glycidyl azide polymer (GAP) and tetra functional glycidyl azide polymer (t-GAP) was studied by using differential scanning calorimeter (DSC) and density functional theory (DFT) methods. Results obtained for the pure binder was compared with the results obtained for binder/plasticizer blend in the parameters of decomposition temperature and the format of the peak which indicated the compatibility or incompatibility of DNDA-5 with the studied binders. Glass transition temperatures of all these blends were determined by low temperature DSC and showed desirable lowering of glass transition temperature with single peak in the case of PLN. The proposed energetic plasticizer DNDA-5 has displayed its compatibility with three binders PGN, PLN and GAP employing thermal techniques. DNDA-5 has been found as incompatible when it is mixed with t-GAP. The predicted relative trend of interaction energies between plasticizer and binder has provided concurrence to results drawn from thermal studies.
- Open Access
- 19 November 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (43) , 12175-12182
TGA, DSC and DFT Studies of TKX‐50, ABTOX and Their Key Precursors
TKX‐50 (Dihydroxylammonium 5,5’‐bistetrazolate‐1,1’‐dioxide) and ABTOX (Diammonium salt of 5,5’‐bistetrazole‐1,1′‐diolate) being simple and cheap to prepare from commonly available chemicals, are emerging as promising energetic materials along with the advantages like required thermal insensitivity, low toxicity and safe handling. In order to synthesize such powerful materials with utmost care, it is essential to know about the precursors and reaction intermediates involved. Therefore, the detailed thermal analyses of various precursors such as glyoxime ( I ), dichloroglyoxime ( II ), diazidoglyoxime ( III ) and bistetrazoledihydroxide ( IV ) and final products viz., TKX‐50 ( V ) and ABTOX ( VI ) were carried out using differential scanning calorimetric and thermal gravimetric analysis experiments. The relative trend of band gap values calculated from the difference of HOMO and LUMO is well correlated with the decomposition temperatures (T max ) values at a heating rate of 10 °C min −1 indicating the relative thermal stability of I–VI . The impact and friction sensitivity of ABTOX and TKX‐50 indicated that these compounds are safer than the currently known powerful explosives such as CL‐20. The calculated density impulse of TKX‐50 in rocket propellant formulations was found to be 499 g m −2 s −1 which is similar as that of HMX (494 g m −2 s −1 ). The theoretical performance prediction of TKX‐50 as the potential ingredient in gun propellant formulations indicated that the TKX‐50 could yield higher force constant (1471 J K −1 ) in comparison to currently known explosive such as RDX (1412 J K −1 ).
- 19 November 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (43) , 12175-12182
Open AccessTGA, DSC and DFT Studies of TKX‐50, ABTOX and Their Key Precursors
TKX‐50 (Dihydroxylammonium 5,5’‐bistetrazolate‐1,1’‐dioxide) and ABTOX (Diammonium salt of 5,5’‐bistetrazole‐1,1′‐diolate) being simple and cheap to prepare from commonly available chemicals, are emerging as promising energetic materials along with the advantages like required thermal insensitivity, low toxicity and safe handling. In order to synthesize such powerful materials with utmost care, it is essential to know about the precursors and reaction intermediates involved. Therefore, the detailed thermal analyses of various precursors such as glyoxime ( I ), dichloroglyoxime ( II ), diazidoglyoxime ( III ) and bistetrazoledihydroxide ( IV ) and final products viz., TKX‐50 ( V ) and ABTOX ( VI ) were carried out using differential scanning calorimetric and thermal gravimetric analysis experiments. The relative trend of band gap values calculated from the difference of HOMO and LUMO is well correlated with the decomposition temperatures (T max ) values at a heating rate of 10 °C min −1 indicating the relative thermal stability of I–VI . The impact and friction sensitivity of ABTOX and TKX‐50 indicated that these compounds are safer than the currently known powerful explosives such as CL‐20. The calculated density impulse of TKX‐50 in rocket propellant formulations was found to be 499 g m −2 s −1 which is similar as that of HMX (494 g m −2 s −1 ). The theoretical performance prediction of TKX‐50 as the potential ingredient in gun propellant formulations indicated that the TKX‐50 could yield higher force constant (1471 J K −1 ) in comparison to currently known explosive such as RDX (1412 J K −1 ).
- Open Access
- 24 July 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (16) , 8673
Correction: Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration
Correction for ‘Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration’ by Sanjeevani H. Sonawane et al., New J. Chem., 2017, DOI: 10.1039/c7nj01172e.
- 24 July 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (16) , 8673
Open AccessCorrection: Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration
Correction for ‘Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration’ by Sanjeevani H. Sonawane et al., New J. Chem., 2017, DOI: 10.1039/c7nj01172e.
- 22 June 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (16) , 7886-7892
Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration
Curing is one of the essential processes of propellants to provide a matrix for the ingredients to bind together. Due to the hazardous and moisture-sensitive nature of isocyanate-based curing agents, it is necessary to replace them with non-isocyanate-based curing agents for curing the energetic binder glycidyl azide polymer (GAP). The reactivity of GAP with five non-isocyanate curing agents was studied by using reaction activation barriers and molecular electrostatic potentials (MESP). The relative trend of MESP-Vmin has predicted the relative reactivity trend of the curing agents. It has been observed that the m-bis(propargyl) aromatic ester possesses similar reactivity to the p-bis(propargyl) aromatic ester as per their negative potentials. The effect of nitro substitution has been examined for both the p- and m-bis(propargyl) aromatic esters. The nitro substitution of the p-bis(propargyl) aromatic ester lowered its reactivity as compared to the unsubstituted p-bis(propargyl) aromatic ester. The reactivity of the m-bis(propargyl) aromatic ester also reduces upon nitro substitution. However, all the studied non-isocyanate curing agents have emerged with similar reacting ability when we studied their reaction energy profiles towards curing of GAP suggesting the importance of considering the role of intermolecular interactions between bis(propargyl) ester-based curing agents and GAP which are absent in the MESP phenomenon. Further, the present work revealed the kinetic and thermodynamic superiority of the non-isocyanate curing system over the conventional hazardous isocyanate-based curing system towards the energetic binder GAP.
- 22 June 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (16) , 7886-7892
Understanding the reactivity of bis(propargyl) aromatic esters towards GAP: a theoretical exploration
Curing is one of the essential processes of propellants to provide a matrix for the ingredients to bind together. Due to the hazardous and moisture-sensitive nature of isocyanate-based curing agents, it is necessary to replace them with non-isocyanate-based curing agents for curing the energetic binder glycidyl azide polymer (GAP). The reactivity of GAP with five non-isocyanate curing agents was studied by using reaction activation barriers and molecular electrostatic potentials (MESP). The relative trend of MESP-Vmin has predicted the relative reactivity trend of the curing agents. It has been observed that the m-bis(propargyl) aromatic ester possesses similar reactivity to the p-bis(propargyl) aromatic ester as per their negative potentials. The effect of nitro substitution has been examined for both the p- and m-bis(propargyl) aromatic esters. The nitro substitution of the p-bis(propargyl) aromatic ester lowered its reactivity as compared to the unsubstituted p-bis(propargyl) aromatic ester. The reactivity of the m-bis(propargyl) aromatic ester also reduces upon nitro substitution. However, all the studied non-isocyanate curing agents have emerged with similar reacting ability when we studied their reaction energy profiles towards curing of GAP suggesting the importance of considering the role of intermolecular interactions between bis(propargyl) ester-based curing agents and GAP which are absent in the MESP phenomenon. Further, the present work revealed the kinetic and thermodynamic superiority of the non-isocyanate curing system over the conventional hazardous isocyanate-based curing system towards the energetic binder GAP.
- 27 July 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (34) , 23554-23571
Understanding metastable phase transformation during crystallization of RDX, HMX and CL-20: experimental and DFT studies
Multiphase growth during crystallization severely affects deliverable output of explosive materials. Appearance and incomplete transformation of metastable phases are a major source of polymorphic impurities. This article presents a methodical and molecular level understanding of the metastable phase transformation mechanism during crystallization of cyclic nitramine explosives, viz. RDX, HMX and CL-20. Instantaneous reverse precipitation yielded metastable γ-HMX and β-CL-20 which undergo solution mediated transformation to the respective thermodynamic forms, β-HMX and ε-CL-20, following ‘Ostwald's rule of stages’. However, no metastable phase, anticipated as β-RDX, was evidenced during precipitation of RDX, which rather directly yielded the thermodynamically stable α-phase. The γ → β-HMX and β → ε-CL-20 transformations took 20 and 60 minutes respectively, whereas formation of α-RDX was instantaneous. Density functional calculations were employed to identify the possible transition state conformations and to obtain activation barriers for transformations at wB97XD/6-311++G(d,p)(IEFPCM)//B3LYP/6-311G(d,p) level of theory. The computed activation barriers and lattice energies responsible for transformation of RDX, HMX and CL-20 metastable phases to thermodynamic ones conspicuously supported the experimentally observed order of phase stability. This precise result facilitated an understanding of the occurrence of a relatively more sensitive and less dense β-CL-20 phase in TNT based melt-cast explosive compositions, a persistent and critical problem unanswered in the literature. The crystalline material recovered from such compositions revealed a mixture of β- and ε-CL-20. However, similar compositions of RDX and HMX never showed any metastable phase. The relatively long stability with the highest activation barrier is believed to restrict complete β → ε-CL-20 transformation during processing. Therefore a method is suggested to overcome this issue.
- 27 July 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (34) , 23554-23571
Understanding metastable phase transformation during crystallization of RDX, HMX and CL-20: experimental and DFT studies
Multiphase growth during crystallization severely affects deliverable output of explosive materials. Appearance and incomplete transformation of metastable phases are a major source of polymorphic impurities. This article presents a methodical and molecular level understanding of the metastable phase transformation mechanism during crystallization of cyclic nitramine explosives, viz. RDX, HMX and CL-20. Instantaneous reverse precipitation yielded metastable γ-HMX and β-CL-20 which undergo solution mediated transformation to the respective thermodynamic forms, β-HMX and ε-CL-20, following ‘Ostwald's rule of stages’. However, no metastable phase, anticipated as β-RDX, was evidenced during precipitation of RDX, which rather directly yielded the thermodynamically stable α-phase. The γ → β-HMX and β → ε-CL-20 transformations took 20 and 60 minutes respectively, whereas formation of α-RDX was instantaneous. Density functional calculations were employed to identify the possible transition state conformations and to obtain activation barriers for transformations at wB97XD/6-311++G(d,p)(IEFPCM)//B3LYP/6-311G(d,p) level of theory. The computed activation barriers and lattice energies responsible for transformation of RDX, HMX and CL-20 metastable phases to thermodynamic ones conspicuously supported the experimentally observed order of phase stability. This precise result facilitated an understanding of the occurrence of a relatively more sensitive and less dense β-CL-20 phase in TNT based melt-cast explosive compositions, a persistent and critical problem unanswered in the literature. The crystalline material recovered from such compositions revealed a mixture of β- and ε-CL-20. However, similar compositions of RDX and HMX never showed any metastable phase. The relatively long stability with the highest activation barrier is believed to restrict complete β → ε-CL-20 transformation during processing. Therefore a method is suggested to overcome this issue.
- 11 November 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (123) , 101297-101308
Probing the compatibility of energetic binder poly-glycidyl nitrate with energetic plasticizers: thermal, rheological and DFT studies
The essential idea of developing energetic binders and plasticizers is to enhance the thermal stability and energy content, improve the oxygen balance and burning behaviour of moulds, reduce the glass transition temperature and improve other mechanical properties of propellant and explosives formulations. The compatibility of energetic binder poly-glycidyl nitrate (PGN) with some energetic plasticizers of solid propellants was studied using differential scanning calorimetry (DSC), rheology and DFT methods in relation to the effect of the addition of five different energetic plasticizers, i.e. bis(2,2-dinitro propyl) acetal (BDNPA), dinitro-diaza-alkanes (DNDA-57), 1,2,4-butanetriol trinitrate (BTTN), N-N-butyl-N′(2-nitroxy-ethyl) nitramine (BuNENA) and diethyleneglycol dinitrate (DEGDN), on the rheological and thermal properties of the energetic binder PGN. The results obtained for the mixture of plasticizer and binder with respect to decomposition temperature (Tmax) and the format of the peak are compared with the results obtained for the pure binder, indicating the compatibility of these plasticizers with PGN. The glass transition temperatures (Tg) of all these mixes were determined by low-temperature DSC, which showed a lowering of Tg with a single peak. Rheological evaluation revealed that the viscosity of the binder is sufficiently lowered with an increase in flow behaviour on addition of 20% (w/w) plasticizer. The addition of 20% DEGDN has the maximum effect on the lowering of the viscosity of PGN. Quantum chemically derived molecular electrostatic potential (MESP) shows the possible sites of interaction of plasticizers and binder with the estimated lowest Vmin values and their magnitudes provide an insight into their mutual interactions. The relative trend in interaction energies between plasticizer and binder, PGN, is well correlated with a corresponding trend in the ability of plasticizers towards reducing the viscosity of PGN. The information gathered in the present study would in general be valuable with respect to designing new plasticizers.
- 11 November 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (123) , 101297-101308
Probing the compatibility of energetic binder poly-glycidyl nitrate with energetic plasticizers: thermal, rheological and DFT studies
The essential idea of developing energetic binders and plasticizers is to enhance the thermal stability and energy content, improve the oxygen balance and burning behaviour of moulds, reduce the glass transition temperature and improve other mechanical properties of propellant and explosives formulations. The compatibility of energetic binder poly-glycidyl nitrate (PGN) with some energetic plasticizers of solid propellants was studied using differential scanning calorimetry (DSC), rheology and DFT methods in relation to the effect of the addition of five different energetic plasticizers, i.e. bis(2,2-dinitro propyl) acetal (BDNPA), dinitro-diaza-alkanes (DNDA-57), 1,2,4-butanetriol trinitrate (BTTN), N-N-butyl-N′(2-nitroxy-ethyl) nitramine (BuNENA) and diethyleneglycol dinitrate (DEGDN), on the rheological and thermal properties of the energetic binder PGN. The results obtained for the mixture of plasticizer and binder with respect to decomposition temperature (Tmax) and the format of the peak are compared with the results obtained for the pure binder, indicating the compatibility of these plasticizers with PGN. The glass transition temperatures (Tg) of all these mixes were determined by low-temperature DSC, which showed a lowering of Tg with a single peak. Rheological evaluation revealed that the viscosity of the binder is sufficiently lowered with an increase in flow behaviour on addition of 20% (w/w) plasticizer. The addition of 20% DEGDN has the maximum effect on the lowering of the viscosity of PGN. Quantum chemically derived molecular electrostatic potential (MESP) shows the possible sites of interaction of plasticizers and binder with the estimated lowest Vmin values and their magnitudes provide an insight into their mutual interactions. The relative trend in interaction energies between plasticizer and binder, PGN, is well correlated with a corresponding trend in the ability of plasticizers towards reducing the viscosity of PGN. The information gathered in the present study would in general be valuable with respect to designing new plasticizers.
- 7 October 2015
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 44 (44) , 19248-19255
Polymer based graphene/titanium dioxide nanocomposite (GTNC): an emerging and efficient thermoelectric material
An ecofriendly procedure for the synthesis of graphene–titanium dioxide nanocomposites (GTNC) has been developed by dispersing nano-titanium dioxide (TiO 2 ) and graphene nanosheets (GNSs) in ethanol via ultrasonication followed by microwave irradiation.
- 7 October 2015
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 44 (44) , 19248-19255
Polymer based graphene/titanium dioxide nanocomposite (GTNC): an emerging and efficient thermoelectric material
An ecofriendly procedure for the synthesis of graphene–titanium dioxide nanocomposites (GTNC) has been developed by dispersing nano-titanium dioxide (TiO 2 ) and graphene nanosheets (GNSs) in ethanol via ultrasonication followed by microwave irradiation.
- 4 July 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (62) , 32840-32846
Calculation of enthalpies of formation and band gaps of polymeric binders
Determination of enthalpies of formation and band gaps of polymeric binders has been carried out using linear extrapolation and PBC techniques, respectively, and suggests that the azido HTPB can be a potential energetic binder in explosive compositions.
- 4 July 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (62) , 32840-32846
Calculation of enthalpies of formation and band gaps of polymeric binders
Determination of enthalpies of formation and band gaps of polymeric binders has been carried out using linear extrapolation and PBC techniques, respectively, and suggests that the azido HTPB can be a potential energetic binder in explosive compositions.