Jian Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jian Zheng has a total of 203 co-authors. Here are the top co-authors by number of shared publications:
B. Peter McGrail
Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
12 shared publications- Radha Kishan Motkuri
Pacific Northwest National Laboratory
12 shared publications - Dushyant Barpaga
Energy and Environment Directorate, Pacific Northwest National Laboratory
11 shared publications - Johannes A. Lercher
Pacific Northwest National Laboratory
11 shared publications - Oliver Y. Gutiérrez
Pacific Northwest National Laboratory
10 shared publications John L. Fulton
Institute for Integrated Catalysis, Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA, 99352, USA
7 shared publications
Latest Publications
- 4 January 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (2) , 1407-1422
Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes
Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.
- 4 January 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (2) , 1407-1422
Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes
Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.
- Open Access
- 14 June 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (28) , 17889-17897
Strategy for enhanced performance of silicon nanoparticle anodes for lithium-ion batteries
The rational structural design of the spherical carbon and TiO2 shell results in a significant improvement in the lithium storage performance of commercial silicon nanoparticles, particularly in terms of cycling stability.
- 14 June 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (28) , 17889-17897
Open AccessStrategy for enhanced performance of silicon nanoparticle anodes for lithium-ion batteries
The rational structural design of the spherical carbon and TiO2 shell results in a significant improvement in the lithium storage performance of commercial silicon nanoparticles, particularly in terms of cycling stability.
- 12 May 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (36) , 13970-13977
Introducing oxygen vacancies to NiFe LDH through electrochemical reduction to promote the oxygen evolution reaction
The transition metal hydroxide NiFe LDH is a promising oxygen evolution reaction (OER) catalyst. Surface engineering, such as the introduction of oxygen vacancies into NiFe LDH, has been reported to further improve the OER performance; however, searching a facile approach remains an issue. In this work, we report a novel and efficient electrochemical reduction method for in situ introduction of oxygen vacancies into NiFe LDH laminates by applying a constant negative voltage. The results show that the reduced NiFe LDH (denoted as r-NiFe LDH) exhibits enhanced OER performance versus its counterpart NiFe due to the increase of oxygen vacancy density, the electrochemically active surface area, wetting ability, and the significant electron transfer rate. In 1 M KOH, the r-NiFe LDH shows a high current density of 110 mA cm−2 at 1.60 V (vs. RHE), which is 2.8 times the current density of NiFe LDH (40 mA cm−2), as well as the long-term stability of 100 h. This electroreduction method is also applicable to other LDH materials loaded by different current substrates or synthesized by various methods, demonstrating its universality for the enhancement of the OER activity of LDH electrocatalysts.
- 12 May 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (36) , 13970-13977
Introducing oxygen vacancies to NiFe LDH through electrochemical reduction to promote the oxygen evolution reaction
The transition metal hydroxide NiFe LDH is a promising oxygen evolution reaction (OER) catalyst. Surface engineering, such as the introduction of oxygen vacancies into NiFe LDH, has been reported to further improve the OER performance; however, searching a facile approach remains an issue. In this work, we report a novel and efficient electrochemical reduction method for in situ introduction of oxygen vacancies into NiFe LDH laminates by applying a constant negative voltage. The results show that the reduced NiFe LDH (denoted as r-NiFe LDH) exhibits enhanced OER performance versus its counterpart NiFe due to the increase of oxygen vacancy density, the electrochemically active surface area, wetting ability, and the significant electron transfer rate. In 1 M KOH, the r-NiFe LDH shows a high current density of 110 mA cm−2 at 1.60 V (vs. RHE), which is 2.8 times the current density of NiFe LDH (40 mA cm−2), as well as the long-term stability of 100 h. This electroreduction method is also applicable to other LDH materials loaded by different current substrates or synthesized by various methods, demonstrating its universality for the enhancement of the OER activity of LDH electrocatalysts.
- 27 December 2021
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 55 (5) , 649-659
Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling
With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudocompression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus, increases in this working capacity directly translate to a more compact and efficient cooling system. However, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance and therefore has limited applicability. To this end, synthetic metal–organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given the ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host–guest chemistry and the role of framework pore topology. These molecular-level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorbate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. This atomic level understanding of sorbate–sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we have made strides toward engineering designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.
- 27 December 2021
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 55 (5) , 649-659
Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling
With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudocompression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus, increases in this working capacity directly translate to a more compact and efficient cooling system. However, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance and therefore has limited applicability. To this end, synthetic metal–organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given the ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host–guest chemistry and the role of framework pore topology. These molecular-level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorbate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. This atomic level understanding of sorbate–sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we have made strides toward engineering designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.
- 9 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (45) , 54266-54273
Structure–Property Correlation of Hierarchically Porous Carbons for Fluorocarbon Adsorption
Although traditional commercially available porous carbon–fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in engineered carbons may further improve the performance. Moreover, insights into structure–property relationships that target higher sorption capacities within these synthesized carbons may guide such materials’ future design. We utilized hierarchically porous carbons (HPCs), synthesized with colossal microporous and mesoporous content characterized by high surface areas (up to 2689 m2/g) and pore volume values (up to 10.31 cm3/g) toward fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ∼250 wt %, outperforming the highest uptake carbon material to date, Maxsorb III (∼220 wt %). Material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt %, ∼2 times the value of reported carbon materials/R134a). Fluorocarbon adsorption on HPCs also displays fast kinetics (equilibrium time: ∼2 min) mainly driven by physical adsorption (Qst: ∼27 kJ/mol), characteristic of swiftly reversible behavior adsorption–desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.
- 9 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (45) , 54266-54273
Structure–Property Correlation of Hierarchically Porous Carbons for Fluorocarbon Adsorption
Although traditional commercially available porous carbon–fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in engineered carbons may further improve the performance. Moreover, insights into structure–property relationships that target higher sorption capacities within these synthesized carbons may guide such materials’ future design. We utilized hierarchically porous carbons (HPCs), synthesized with colossal microporous and mesoporous content characterized by high surface areas (up to 2689 m2/g) and pore volume values (up to 10.31 cm3/g) toward fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ∼250 wt %, outperforming the highest uptake carbon material to date, Maxsorb III (∼220 wt %). Material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt %, ∼2 times the value of reported carbon materials/R134a). Fluorocarbon adsorption on HPCs also displays fast kinetics (equilibrium time: ∼2 min) mainly driven by physical adsorption (Qst: ∼27 kJ/mol), characteristic of swiftly reversible behavior adsorption–desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.
- Open Access
- 21 June 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (33) , 17750
Inside Cover: Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling (Angew. Chem. Int. Ed. 33/2021)
- 21 June 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (33) , 17750
Open AccessInside Cover: Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling (Angew. Chem. Int. Ed. 33/2021)
- Open Access
- 21 June 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (33) , 17894
Innentitelbild: Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling (Angew. Chem. 33/2021)
- 21 June 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (33) , 17894
Open AccessInnentitelbild: Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling (Angew. Chem. 33/2021)
- 16 June 2021
- Published by Springer Nature in Catalysis Letters
- Vol. 152 (4) , 1109-1118
Promoting Effect of Ce Doping on the CuZn/ZnAl2O4 Catalysts for Methanol Decomposition to Hydrogen and Carbon Monoxide
- 16 June 2021
- Published by Springer Nature in Catalysis Letters
- Vol. 152 (4) , 1109-1118
Promoting Effect of Ce Doping on the CuZn/ZnAl2O4 Catalysts for Methanol Decomposition to Hydrogen and Carbon Monoxide
- 1 May 2021
- Published by Elsevier in Molecular Catalysis
- Vol. 508
Influence of support precursor on FeCe-TiO2 for selective catalytic reduction of NO with ammonia
- 1 May 2021
- Published by Elsevier in Molecular Catalysis
- Vol. 508
Influence of support precursor on FeCe-TiO2 for selective catalytic reduction of NO with ammonia
- 27 April 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (33) , 18185-18191
Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling
Adsorption‐based cooling is an energy‐efficient renewable‐energy technology that can be driven using low‐grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear‐shaped isotherms are revealed for the materials, namely COP‐2 and COP‐3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect‐containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect‐containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect‐containing porous COPs are promising for adsorption‐based cooling applications.
- 27 April 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (33) , 18185-18191
Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling
Adsorption‐based cooling is an energy‐efficient renewable‐energy technology that can be driven using low‐grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear‐shaped isotherms are revealed for the materials, namely COP‐2 and COP‐3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect‐containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect‐containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect‐containing porous COPs are promising for adsorption‐based cooling applications.