AKA.-Rong Kim

A.-Rong Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


A.-Rong Kim has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Building-Integrated Photovoltaic Modules Using Additive-Manufactured Optical Pattern

    by Young-Su Kim, A-Rong Kim, Sung-Ju Tark

    This paper suggests a novel way to manufacture power-efficient building-integrated photovoltaic (BIPV) modules that are aesthetically acceptable for use in zero-energy buildings (ZEBs). An optical pattern is formed using additive manufacturing (AM) to maximize the number of sunrays that reach the solar cells and to hide cells beneath the pattern. The optical pattern was optimized by simulation, then selected PV modules were fabricated to ensure that they met the optimal optical pattern conditions. Increase in pattern angle and lens space yielded increase in the output power of the PV module, but reduced the aesthetic functionality. This color BIPV technology is expected to help expand the BIPV market and reduce carbon for “net zero” objectives.


  • Segmented Differential Power Processing Converter Unit and Control Algorithm for Photovoltaic Systems

    by Hoejeong Jeong, Seungbin Park, Jee-Hoon Jung, Taewon Kim, A-Rong Kim, Katherine A. Kim

    Differential power processing (DPP) for photovoltaic (PV) systems can achieve high system efficiency and maintain maximum power production even under mismatched conditions. However, DPP converters applied to large-scale systems have challenges of complicated installation and high voltage ratings. The segmented DPP structure is introduced as a modular approach that utilizes groups of bidirectional DPP flyback converters to maximize PV power generation while minimizing converter power loss. Groups of four DPP converters are combined into a segmented DPP unit with maximum power point tracking (MPPT) control to maximize output power of the unit. The segmented DPP system and control algorithm are verified through simulation and hardware experimentation. Simulation results verify the effectiveness of the control algorithm with multiple segmented DPP units interacting with a typical inverter employing MPPT. Experimental results verify that system efficiency of the segmented DPP unit reaches 96.4% in even lighting conditions, reaches 92.7% in severe partial shading conditions, and shows an increase of up to 14.8% in uneven lighting conditions compared to an equivalent series-connected PV system.


  • A Design Study on a Multibillet HTS Induction Heater With REBCO Racetrack Coils

    by Jin-Geun Kim, Seungyong Hahn, Jongho Choi, Yannis K. Semertzidis, Soobin An, Arong Kim

    Recently an induction heating system comprising a pair of no-insulation high temperature superconductor (HTS) racetrack coils was built and now it is commercially available. It generates a direct-current (DC) magnetic field in which a conductive metallic billet rotates at a high speed. Most DC induction machines accommodate a “single” billet per operation. This paper proposes an alternative concept of a “multiple-billet” induction heater, where the multiple billets can be simultaneously heated. The system consists of 8 pairs of HTS racetrack coils that are placed in a circular pattern. An arbitrary number of billets may be placed and rotate at the same time in the space between racetrack coil pairs. The main goal in this paper is to theoretically demonstrate the principle of operation of the new multi-billet system. The paper presents: (1) overall system configuration and the principle of operation; (2) electromagnetic design of the 8-pole HTS magnet; (3) analyses with key operation parameters to estimate the multi-billet heater performance. Due to the “positive” mutual inductance among neighbor racetrack coils, the multi-billet system is estimated to deliver a larger heating power per billet than that of its single-billet counterpart for given operating conditions. Also, due to the eddy-currents induced in each billet, the power per billet reduces when the number of billets increases beyond an optimal value.


  • Induced Current-Based Performance Measurement System for Wide and Stacked HTS Wires

    by Byeong-Soo Go, Kwangmin Kim, Minwon Park, In-Keun Yu, Sang-Jin Lee, A-Rong Kim, Tae-Joon Park

    Recently, high-temperature superconductor (HTS)-based devices have been applied to practical electric power systems. In order to increase the critical currents of HTS wires, wide and stacked HTS wires are being extensively researched. However, general systems for testing critical currents via voltage taps are not accurate for measuring the critical currents of wide and stacked HTS wires. This paper proposes an induced current-based performance measurement system for wide and stacked HTS wires. The system consists of wide and stacked HTS wires and induction coils made of 2G HTS wire. The electromagnetic performance of the HTS wires and induction coil is analyzed using a finite element method program. The basic structure of the performance measurement system is designed and fabricated based on the electromagnetic analysis results. In the experiment, the characteristics of the HTS wire are analyzed under charge and discharge conditions from the viewpoint of induced currents. The current of the stacked HTS wires is measured by a Rogowski coil. As a result, we can accurately identify the characteristics of the wide and stacked HTS wires, such as critical current and joint resistance.

  • Design and Characteristic Analysis of a 10 kW Superconducting Synchronous Generator for Wind Turbines

    by Gyeong-Hun Kim, Kwang-Min Kim, Sung-Jun Jung, Hae-Jin Sung, Heecheol Park, Seokho Kim, Minwon Park, In-Keun Yu, Sangjin Lee, A-Rong Kim, et al.

    A superconducting synchronous generator (SCSG) is suitable for designing a large-scale wind power generation system, because of its lighter weight and higher torque as compared to conventional generators. This paper analyzes a 10-kW SCSG designed by the finite element method. The finite element method tool is used to evaluate the designed 10-kW SCSG, which has 16 double pancake coils of race-track type with coated conductor tape according to the component certification (IEC 60034) for a wind power generator. The results show several specific characteristics of the designed SCSG. The results can also effectively evaluate the SCSG for a wind turbine, before the scale-up design and fabrication of the generator.


  • Operating Characteristics of an Insulationless HTS Magnet Under the Conduction Cooling Condition

    by Kwangmin Kim, Sung-Jun Jung, Hae-Jin Sung, Gyeong-Hun Kim, Seokho Kim, Sangjin Lee, A-Rong Kim, Minwon Park, In-Keun Yu

    This paper considers the insulationless high-temperature superconducting (HTS) magnet as a new and innovative concept for dc applications due to its benefits as compared to conventional HTS magnets with insulation layers between HTS conductors. The purpose of this paper is to study the operating characteristics of an insulationless HTS magnet. The normal operating characteristics of the insulationless HTS magnet were investigated according to the various current levels. Thermal stability of the insulationless HTS magnet was also analyzed. The critical current of the insulationless HTS magnet was measured at 40 K. The temperature distribution of the insulationless HTS magnet was measured using thermocouples. The experiment results demonstrate superior thermal stability characteristics in the insulationless HTS magnet. Thus, it is confirmed that the thermal performance of large-scale HTS magnets can be enhanced by applying insulationless magnets instead of general insulated HTS magnets.


  • Design and manufacture of a toroidal-type SMES for combination with real-time digital simulator (RTDS)

    by Kwang-Min Kim, A-Rong Kim, Minwon Park, In-Keun Yu, Bum-Yong Eom, Kidoek Sim, Seok-Ho Kim, Myung-Hwan Sohn, Hae-Jong Kim, Joon-Han Bae, et al.


  • Analysis of Operational Loss Characteristics of 10 kJ Class Toroid-Type SMES

    by Kwangmin Kim, A-Rong Kim, Jin-Geun Kim, Minwon Park, In-Keun Yu, Myung-Hwan Sohn, Bum-Yong Eom, Kidoek Sim, Seokho Kim, Hae-Jong Kim, et al.

    This paper describes the design results, loss analysis, and experiment testing of the real manufactured toroid-type superconducting magnetic energy storage (SMES). We analysed heat load through the conduction and radiation of the cryostat and magnetization loss caused by the charging and discharging of the toroid-type SMES system. We also measured the characteristics of toroid-type SMES under three different types of operating conditions (steady state, one-cycle charging and discharging, series charging and discharging). The fundamental design specifications and the data obtained from the experiment will be applied to a large-scale toroid-type SMES system design.


  • Quench Detection Method of HTS Model Coil Using a Series-Type Thermocouple

    by Daewon Kim, Jin-Geun Kim, A.-Rong Kim, Minwon Park, In-Keun Yu, Ki-Deok Sim, Seockho Kim, Jeonwook Cho, Myung-Hwan Sohn

    This paper proposes a quench detection method applied to a HTS coil and also discusses the results of tests on an HTS BSCCO wire and an HTS YBCO coil. A series-type thermocouple was fabricated to detect quench, where several thermocouples were welded in series. As the series-type thermocouple has many points of detection, variation in temperature was detected at each point by using thermo-electromotive force. The feasibility of the proposed method was investigated through the quench detection tests on the YBCO coil. This method has advantages such as a simple structure and cost effectiveness and also protects the HTS coil by detecting partial quench and its propagation.


  • Development of a PSCAD/EMTDC Model Component for AC Loss Characteristic Analysis of HTS Power Cable

    by Jin Geun Kim, A.-Rong Kim, Daewon Kim, Minwon Park, In-Keun Yu, Jeonwook Cho, Ki-Deok Sim, Seokho Kim, Jun Kyoung Lee, Young-Jin Won

    Although Electromagnetic power transient analysis software (PSCAD/EMTDC) is one of the useful simulation tools, it does not provide a High Temperature Superconducting (HTS) power cable component, which has the same impedance characteristic of a real HTS power cable. The authors have already proposed a model component of the HTS power cable under the fault condition and simulated power system including the HTS power cable component. The authors, in this paper, developed a PSCAD/EMTDC model component of the HTS power cable that includes the AC loss characteristic. The AC loss of the superconductor changes due to the magnitude of the transport current. The relational characteristics between the AC transport current and resistance were measured using a model cable. The obtained characteristics were applied to the model component of PSCAD/EMTDC. The developed model component was used in the EMTDC simulation circuit. The simulation results show the same characteristics as the experiment results. The resistance variation of the HTS power cable and AC loss could be simulated using the developed model component and the component will effectively be used for the AC loss related simulations.