XRXi Rao

Xi Rao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xi Rao has a total of 154 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Charge-Driven Engineering of Titanium Implants with Chitosan and Poly- l -Lysine for Dual Antiadhesive and Anticorrosive Functionality

    by Ayrton G. Silva, João Pedro dos S. Silva, João Victor C. Cordeiro, Nilson C da Cruz, Elidiane C. Rangel, Carlos A. Fortulan, Jamil A. Shibli, Conrado R. M. Afonso, Daniel G. S. dos Santos, Luciene Figueiredo, et al.

    Peri-implant infections remain a major cause of implant failure, motivating the development of multifunctional titanium surfaces capable of preventing bacterial colonization while preserving implant performance. Herein, a chitosan/poly-l-lysine (CH-PLL) bilayer coating was engineered on hydroxyl-rich titanium surfaces generated by hydrothermal treatment (HT) or plasma electrolytic oxidation (PEO). We hypothesized that the CH-PLL bilayer would establish a stable cationic interface capable of impairing early bacterial adhesion and modulating polymicrobial biofilm development, whereas the PEO substrate would provide superior mechanical and electrochemical stability. Surface characterization confirmed successful bilayer formation and showed that PLL functionalization increased positive surface charge and hydrophilicity while improving tribological and electrochemical performance, with the PEO@CH-PLL coating exhibiting a friction coefficient of ∼0.01 and significantly enhanced corrosion resistance (P < 0.05). Accordingly, PLL-coated surfaces reduced bacterial adhesion by 3.9 and 3.1 log CFU for Staphylococcus aureus and Escherichia coli, respectively. Against a saliva-derived polymicrobial biofilm, the coating reduced the total bacterial burden by ∼1.8 log while suppressing disease-related peri-implant pathogens. Importantly, these antibacterial effects were accompanied by preserved protein adsorption and enhanced preosteoblastic activity after 7 days. Collectively, these findings demonstrate that combining a stable cationic CH-PLL interface with a PEO-generated oxide layer provides a multifunctional titanium surface integrating biofilm control with improved mechanical, electrochemical, and biological performance.

  • Open Access

    A graphdiyne-enabled TiO2/g-C3N4 bio-heterojunction for visible-light antibacterial photocatalysis and infected wound healing

    by Chongqing Yu, Zujiang Liu, Jin Ye, Ruixin Zhang, Min Ren, Fulin Deng, Anning Zhao, Ali Abou-Hassan, Yichun Wang, Yao Zhang, et al.

  • Open Access

    Photoresponsive Bilayer Coating Integrating a Porous Zinc Oxide Layer and a Chitosan–Antibiotic Drug Delivery System for Antimicrobial Photodynamic Therapy in Biomedical Implants

    by Samuel S. Malheiros, Maria Helena R. P. Borges, Elidiane C. Rangel, Nilson C. Cruz, Carlos A. Fortulan, Xi Rao, Liqun Xu, João Gabriel S. Souza, Eduardo B. Moffa, Bruna E. Nagay, et al.

    Peri-implant infections remain a major cause of implant failure, highlighting the need for antimicrobial implant surfaces capable of suppressing biofilm formation while preserving the physicochemical and biological features needed for osseointegration. Here, we engineered a photoresponsive bilayer coating on titanium by anchoring a photosensitive antibiotic, demeclocycline (DMC), loaded into a polymeric chitosan film onto a zinc-doped porous oxide layer produced by plasma electrolytic oxidation (PEO). The inner PEO/Zn layer generated a porous ZnO-containing TiO2 matrix that provided mechanical interlocking for the polymeric film. The outer polymeric chitosan film deposition reduced surface roughness and hydrophilicity and enabled DMC incorporation. Chemical analyses confirmed the stepwise construction of the bilayer coating, revealing TiO2/ZnO porous oxide layer formation and chitosan and DMC incorporation. ROS generation under blue light was confirmed by the DCFH-DA fluorescence assay. Mechanically, the bilayer coating decreased the friction coefficient by approximately 75%, with the chitosan layer acting as a lubricating barrier under tribological stress. DMC release was sustained for 21 days with lysozyme-mediated degradation accelerating early drug release. Against saliva-derived polymicrobial biofilms formed for 96 h, the DMC-loaded coating reduced viable counts by approximately 2-log units under dark conditions, confirming intrinsic antibacterial activity. Upon blue light irradiation, the reduction reached approximately 3-log units, indicating on-demand photodynamic enhancement of the antimicrobial effect mediated by ROS. This response was accompanied by reduced metabolic activity, lower biofilm mass and matrix protein content, increased membrane-compromised cells assessed by live/dead, and suppression of more pathogenic microbial complexes. The coating also retained antibiofilm activity after microbial recolonization and the reusability of photodynamic therapy. Beyond antimicrobial activity, the coating preserved preosteoblastic cell viability and supported hydroxyapatite nucleation. Proteomic analysis showed an enriched immune, coagulation, protease-regulatory, and structural pathway proteomic profile. Overall, this bilayer platform integrates mechanical stability, sustained antibiotic delivery, and light-activated antimicrobial photodynamic therapy, representing a promising multifunctional coating for the control of implant infection.

  • Open Access

    Tannic acid-cerium metal-phenolic network deposited on oxygen-vacancy-defective TiO2 coatings for enhanced photothermal antibacterial, antioxidant, and osteogenic properties

    by Fulin Deng, Enyu Cao, Ruixin Zhang, Linjie Song, Yuanzhen Zhou, Chongqing Yu, Anning Zhao, Jihua Nie, Min Ren, Wenlong Mao, et al.

  • Biomimetic Dental Implant With Programmed Surface Platform for Enhanced Interfacial Osseointegration via Sequentially Regulating Bone Regeneration With Switchable Immunomodulatory and Antibacterial Properties

    by Chongqing Yu, Yichun Wang, Dan Zheng, Ruixin Zhang, Anning Zhao, Tao Wang, Liqun Xu, Xi Rao, Jie Xu

    Aseptic loosening and infections are leading causes of dental implant failure. Here, we developed a multifunctional, programmed surface coating (Ti@Mo‐m/Q) constructed from a molybdenum (Mo)‐doped biomimetic porous layer designed to sequentially coordinate bone regeneration. In the initial stage, with mild near‐infrared (NIR) irradiation the outermost quercetin (Q) layer promotes M2 macrophage polarization through the FoxO/NF‐κB signaling pathway, establishing a regenerative immune microenvironment while controlling antibiotic release. Subsequently, intermediate layer acts as an NIR‐responsive “on‐demand” antibiotic reservoir, achieving >99% bactericidal efficacy against oral pathogens, including S. aureus , E. coli , and P. gingivalis . Finally, the innermost Mo‐doped biomimetic ceramic film enhances osteogenesis, supported by the NIR‐responsive antibacterial activity of the underlying Ti@Mo layer. Generally, these findings indicate that the Ti@Mo‐m/Q coating significantly improves interfacial osseointegration by strategically aligning with the physiological progression of bone regeneration while providing tunable immunomodulatory and antibacterial functions, thereby offering a promising framework for next‐generation implant surface engineering.


  • Tuning the (111)/(110) facet-area ratio of rutile TiO2 nanorods for enhanced charge separation and formaldehyde photo-oxidation

    by Tianchen Liu, Haiqin Jiang, Anning Zhao, Fulin Deng, Ruixin Zhang, Linjie Song, Yuanzhen Zhou, Jihua Nie, Min Ren, Wenlong Mao, et al.

  • Amyloid-like Protein-Metal Sulfide Nanocoatings for Synergistic Photothermal and Antibacterial Implant Surface Protection

    by Kexin Li, Xiaojing Zhang, Liqun Xu, Kun Xu, Xi Rao, Selvakumar Murugesan, Valentim A. R. Barão, Peng Yang, En-Tang Kang

    Preventing bacterial adhesion and biofilm formation is essential for the long-term success of biomedical implants. Implant-associated infections remain a significant clinical challenge, underscoring the urgent need for effective and durable antimicrobial surface strategies. This study develops a nanocoating with dual antibacterial adhesion and photothermal antibacterial properties for biomedical surface modification. Bovine serum albumin-templated metal sulfide (MS@BSA) nanocomposites are synthesized and converted into a stable nanofilm via phase-transitioned BSA (PTB) self-assembly. The MS@PTB coating adheres to various substrates and demonstrates broad-spectrum antibacterial activity. In vitro assays show that the copper sulfide@PTB (CuS@PTB) coating significantly reduces bacterial attachment and suppresses biofilm development upon 808 nm near-infrared irradiation. RNA sequencing identifies differentially expressed genes in common pathogens, indicating disrupted respiration, energy metabolism, and virulence pathways as well as stress responses to heat and copper ions. In vivo experiments using rat subcutaneous infection and abdominal wall defect models demonstrate that CuS@PTB markedly reduces bacterial load and inflammatory responses while accelerating tissue regeneration and maintaining excellent biocompatibility. The results demonstrate the synergistic antibacterial effects of photothermal heating and Cu ion release, supporting CuS@PTB as a promising antimicrobial surface coating for implantable biomaterials.


  • Biomimetic Engineering of Robust Gradient Antibacterial Coatings using Hollow Nanoframes of Prussian Blue Analogues

    by Xiaodong He, Huajun Wu, Kun Xu, Jianfeng Tang, Chunmei Li, Gnanasekar Sathishkumar, Xi Rao, Selvakumar Murugesan, Valentim A. R. Barão, En‐Tang Kang, et al.

    Photothermal therapy for bacterial infections poses a significant challenge due to the high temperatures required for effective bacterial eradication, which can also harm surrounding healthy tissues. Determining the minimal effective temperature for bacterial destruction is therefore critical. In this study, artificial reef‐like manganese‐doped Prussian blue (PBMn) nanoframes are developed as photothermal agents and physical cross‐linkers to reinforce a phytic acid and cationic polymer network coating. This innovative deposition approach facilitates the creation of a gradient PBMn‐enhanced phytic acid‐cationic polymer (PC‐PBM) coating, achieving a balance between effective photothermal antibacterial activity and reduced heat‐induced collateral damage. When applied to a polyurethane (PU) substrate, the gradient PC‐PBM coating exhibits excellent photothermal efficiency, biocompatibility, and tunable antibacterial activity. Gene transcriptomics analysis demonstrates significant downregulation of virulence genes and biofilm‐forming genes in pathogens following PC‐PBM treatment, confirming the antibacterial efficacy of the coating. Both in vitro and in vivo evaluations, including studies in an infected hernia model, underscore the coating's excellent anti‐infection performance. This work introduces a robust and biomimetic strategy for constructing gradient coating, advancing photothermal therapy by achieving effective bacterial eradication with reducing collateral damage to healthy tissues.


  • Phytic Acid-Polypeptide Network-Promoted Deposition of Photoactive Agents for the Construction of Synergistic Bactericidal Coatings

    by Ying Jiang, Xiaodong He, Li Xiang, Sathishkumar Gnanasekar, Ping Wang, Guiyu Luo, Yu She, Weizhe Li, Yunjie Xiang, Kun Xu, et al.

    Constructing antimicrobial surface coatings is essential to protect biomedical implants and devices from biological contamination or microbial infections. In this study, a simple technique was developed to prepare phytic acid (PA) and ε-polylysine (Ply)/hyperbranched polylysine (HPL) network coatings on implant surfaces due to the intrinsic surface affinity of PA and electrostatic attraction between Ply/HPL and PA. The PA-Ply (or PA-HPL) coating facilitates the encapsulation of diverse photoactive agents, including gold nanoparticles (Au NPs), multiwalled carbon nanotubes (MWNTs), graphene oxide (GO), indocyanine green (ICG), and chlorophyll copper sodium salt (SCC) onto substrate surfaces in a matrix-independent manner. The physicochemical characterization confirms that PA-Ply network coatings accommodate high quantities of photoactive components. Although multiple substrates and photoactive agents are initially explored to compare coating formation and loading capacity, the primary focus of this study is the in vitro and in vivo antibacterial performance of SCC- and ICG-functionalized coatings. In vitro studies demonstrate that PA-Ply exerts more detrimental effects on bacterial pathogens compared to PA-HPL network coatings. Additionally, PA-Ply (or HPL)-SCC generates singlet oxygen (1O2) under xenon lamp irradiation, while the PA-Ply-SSC-modified titanium (Ti) surface achieves enhanced bacterial inactivation through a synergistic mechanism of contact killing and photodynamic action. Similarly, the PA-Ply (or HPL)-ICG-modified implants exhibit favorable biocompatibility and synergistic antibacterial effects in vivo under near-infrared (NIR) irradiation. The findings present a feasible strategy for surface modification, endowing medical implants with enhanced antibacterial protection.