Sónia Martins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Sónia Martins has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Magda Cardoso Semedo
Departamento de Engenharia Química, Instituto Superior de Engenharia de Lisboa (ISEL), Universidade Politécnica de Lisboa (UPL), R. Conselheiro Emídio Navarro, 1, 1959-007 Lisboa, Portugal
9 shared publications - Amin Karmali
Chemical Engineering and Biotechnology Research Center, Department of Chemical Engineering, Instituto Superior de Engenharia de Lisboa, Instituto Politécnico de Lisboa, Rua Conselheiro Emídio Navarro, Nº. 1, 1959-007 Lisboa, Portugal
8 shared publications - Ana Isabel Ribeiro-Barros
Forest Research Center, Associate Laboratory TERRA, School of Agriculture, University of Lisbon, Portugal
6 shared publications - Jose Cochicho Ramalho
Forest Research Centre (CEF), Associate Laboratory TERRA, School of Agriculture (ISA), University of Lisbon (ULisboa), Quinta do Marquês, Av. da República, 2784-505 Oeiras, and Tapada da Ajuda, 1349-017 Lisboa, Portugal
6 shared publications - Maria Luísa Serralheiro
BioISI—Instituto de Biosistemas e Ciências Integrativas, Faculdade de Ciências, Universidade de Lisboa, 1749-016 Lisboa, Portugal
6 shared publications - Fabio Murilo DaMatta
Departamento de Biologia Vegetal, Universidade Federal de Viçosa, 36570-900, Viçosa, MG, Brazil
5 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by MDPI AG in Applied Nano
- Vol. 7 (4) , 38
Green Synthesis of Fluorescent and Bioactive Carbon Dots Derived from Agri-Food Industry Waste
Fluorescent nitrogen-doped carbon dots (TRCDs) were synthesized from tomato residues (TR) by hydrothermal carbonization, and the effects of parameters like temperature, reaction time, nitrogen precursor, and ethylenediamine/tomato residue (EDA/TR) mass ratio on their photophysical and biological properties were investigated. The optimal synthesis conditions were achieved at 250 °C for 6 h using an EDA/TR mass ratio of 0.08, yielding an aqueous carbon dot fraction in 17.6% (w/w). TRCDs exhibit a strong blue fluorescence, with a fluorescence quantum yield of 0.17, at an emission wavelength of 460 nm. AFM and TEM analyses showed well-dispersed quasi-spherical nanoparticles with dimensions characteristic of carbon dots. The synthesized TRCDs, produced with different additives, demonstrate antioxidant activity in both ABTS•+ and DPPH• assays, reaching values of up to 969 and 75 µg Trolox equivalents (TE)/mg TRCDs, respectively. Cytotoxicity studies indicate cell viability in above 80% up to 500 μg/mL in all tested cell lines and above 90% in VERO cells at concentrations up to 2000 μg/mL, while fluorescence microscopy revealed cell-associated fluorescence following TRCD exposure, supporting their potential application as fluorescent cellular markers.
- 1 November 2026
- Published by MDPI AG in Applied Nano
- Vol. 7 (4) , 38
Open AccessGreen Synthesis of Fluorescent and Bioactive Carbon Dots Derived from Agri-Food Industry Waste
Fluorescent nitrogen-doped carbon dots (TRCDs) were synthesized from tomato residues (TR) by hydrothermal carbonization, and the effects of parameters like temperature, reaction time, nitrogen precursor, and ethylenediamine/tomato residue (EDA/TR) mass ratio on their photophysical and biological properties were investigated. The optimal synthesis conditions were achieved at 250 °C for 6 h using an EDA/TR mass ratio of 0.08, yielding an aqueous carbon dot fraction in 17.6% (w/w). TRCDs exhibit a strong blue fluorescence, with a fluorescence quantum yield of 0.17, at an emission wavelength of 460 nm. AFM and TEM analyses showed well-dispersed quasi-spherical nanoparticles with dimensions characteristic of carbon dots. The synthesized TRCDs, produced with different additives, demonstrate antioxidant activity in both ABTS•+ and DPPH• assays, reaching values of up to 969 and 75 µg Trolox equivalents (TE)/mg TRCDs, respectively. Cytotoxicity studies indicate cell viability in above 80% up to 500 μg/mL in all tested cell lines and above 90% in VERO cells at concentrations up to 2000 μg/mL, while fluorescence microscopy revealed cell-associated fluorescence following TRCD exposure, supporting their potential application as fluorescent cellular markers.
- Open Access
- 24 July 2025
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 16, 1623156
Stress resilience in Coffea arabica and Coffea canephora under harsh drought and/or heat conditions: selected genes, proteins, and lipid integrated responses
Climate change has intensified the frequency, severity, and simultaneous incidence of drought and heat events, threatening the sustainability of agricultural systems worldwide. This implies the use of resilient plant genotypes able to activate defense mechanisms and overcome stress damage. We examined the leaf transcriptomic, proteomic, and membrane lipid responses in two cultivars of the main coffee-producing species—Coffea arabica L. cv. Icatu and Coffea canephora Pierre ex A. Froehner cv. Conilon Clone 153 (CL153—subjected to single and combined exposure to severe water deficit (SWD) and heat (up to 42°C/30°C, day/night). Well-watered (WW) plants maintained under adequate temperature (25°C/20°C) were gradually exposed to SWD and afterward to a slow temperature increase up to 42°C/30°C, followed by a 2-week recovery (Rec14) after reestablishing temperature and water conditions. Gene regulation and the respective protein contents were often marginally correlated; however, CL153 and, especially, Icatu showed markedly greater abundance of transcripts and/or proteins of most molecules to the imposed stress conditions, along with altered lipid profiles of chloroplast membranes. A set of key complementary response mechanisms, expressed either commonly or in a genotype- or stress-dependent manner, was identified. Additionally, the common responses to all stress conditions reflected stress crosstalk and interaction. Drought (with or without heat superimposition) constituted a greater response driver than heat in both genotypes. These showed de-novo synthesis of lipids and proteins, altering the fatty acid profile and unsaturation degree of chloroplast membranes and strengthening oxidative stress protection. The latter involved several genes and their respective proteins (e.g., aquaporins, PIPs and TIPs; chaperonins, Chape 20 and 60; dehydrin, DH1; dehydration-responsive element binding protein, DREB1D-F1; early light-induced protein, ELIP; heat shock protein 70 kDa, HSP70; ascorbate peroxidases, APXs; catalase, CAT), particularly prominent in Icatu. Also, a major recovery was found, although several genes/proteins exhibited lasting effects by Rec14. Overall, we revealed newly shared and specific (genotype or stress) responses of a complex network supporting Coffea spp. resilience. The identification of reliable stress-responsive traits is crucial to ensure the sustainability of this important tropical crop facing future climate stress scenarios, in which superimposed drought and heat stresses will be more frequent.
- 24 July 2025
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 16, 1623156
Open AccessStress resilience in Coffea arabica and Coffea canephora under harsh drought and/or heat conditions: selected genes, proteins, and lipid integrated responses
Climate change has intensified the frequency, severity, and simultaneous incidence of drought and heat events, threatening the sustainability of agricultural systems worldwide. This implies the use of resilient plant genotypes able to activate defense mechanisms and overcome stress damage. We examined the leaf transcriptomic, proteomic, and membrane lipid responses in two cultivars of the main coffee-producing species—Coffea arabica L. cv. Icatu and Coffea canephora Pierre ex A. Froehner cv. Conilon Clone 153 (CL153—subjected to single and combined exposure to severe water deficit (SWD) and heat (up to 42°C/30°C, day/night). Well-watered (WW) plants maintained under adequate temperature (25°C/20°C) were gradually exposed to SWD and afterward to a slow temperature increase up to 42°C/30°C, followed by a 2-week recovery (Rec14) after reestablishing temperature and water conditions. Gene regulation and the respective protein contents were often marginally correlated; however, CL153 and, especially, Icatu showed markedly greater abundance of transcripts and/or proteins of most molecules to the imposed stress conditions, along with altered lipid profiles of chloroplast membranes. A set of key complementary response mechanisms, expressed either commonly or in a genotype- or stress-dependent manner, was identified. Additionally, the common responses to all stress conditions reflected stress crosstalk and interaction. Drought (with or without heat superimposition) constituted a greater response driver than heat in both genotypes. These showed de-novo synthesis of lipids and proteins, altering the fatty acid profile and unsaturation degree of chloroplast membranes and strengthening oxidative stress protection. The latter involved several genes and their respective proteins (e.g., aquaporins, PIPs and TIPs; chaperonins, Chape 20 and 60; dehydrin, DH1; dehydration-responsive element binding protein, DREB1D-F1; early light-induced protein, ELIP; heat shock protein 70 kDa, HSP70; ascorbate peroxidases, APXs; catalase, CAT), particularly prominent in Icatu. Also, a major recovery was found, although several genes/proteins exhibited lasting effects by Rec14. Overall, we revealed newly shared and specific (genotype or stress) responses of a complex network supporting Coffea spp. resilience. The identification of reliable stress-responsive traits is crucial to ensure the sustainability of this important tropical crop facing future climate stress scenarios, in which superimposed drought and heat stresses will be more frequent.
- Open Access
One-Pot Microwave-Assisted Synthesis of Fluorescent Carbon Dots from Tomato Industry Residues with Antioxidant and Antibacterial Activities
Tomato waste (TW) was employed as a sustainable source for the synthesis of fluorescent carbon dots (CDs) via a microwave-assisted hydrothermal carbonization (Mw-HTC) method, aiming at its valorization. Several amines were used as nitrogen additives to enhance the fluorescence quantum yield (QY) of CDs, and a set of reaction conditions, including additive/TW mass ratio (0.04–0.32), dwell time (15–60 min), and temperature (200–230 °C) of the HTC process, were scrutinized. The structural analysis of the tomato waste carbon dots (TWCDs) was undertaken by FTIR and 1H NMR techniques, revealing their most relevant features. In solid state, transmission electron microscopy (TEM) analysis showed the presence of nearly spherical nanoparticles with an average lateral size of 8.1 nm. Likewise, the topographical assessment by atomic force microscopy (AFM) also indicated particles’ heights between 3 and 10 nm. Their photophysical properties, revealed by UV–Vis, steady-state, and time-resolved fluorescence spectroscopies, are fully discussed. Higher photoluminescent quantum yields (up to 0.08) were attained when the biomass residues were mixed with organic aliphatic amines during the Mw-HTC process. Emission tunability is a characteristic feature of these CDs, which display an intensity average fluorescence lifetime of 8 ns. The new TWCDs demonstrated good antioxidant properties by the ABTS radical cation method (75% inhibition at TWCDs’ concentration of 5 mg/mL), which proved to be related to the dwell time used in the CDs synthesis. Moreover, the synthesized TWCDs suppressed the growth of Escherichia coli and Staphylococcus aureus at concentrations higher than 2000 μg/mL, encouraging future antibacterial applications.
Open AccessOne-Pot Microwave-Assisted Synthesis of Fluorescent Carbon Dots from Tomato Industry Residues with Antioxidant and Antibacterial Activities
Tomato waste (TW) was employed as a sustainable source for the synthesis of fluorescent carbon dots (CDs) via a microwave-assisted hydrothermal carbonization (Mw-HTC) method, aiming at its valorization. Several amines were used as nitrogen additives to enhance the fluorescence quantum yield (QY) of CDs, and a set of reaction conditions, including additive/TW mass ratio (0.04–0.32), dwell time (15–60 min), and temperature (200–230 °C) of the HTC process, were scrutinized. The structural analysis of the tomato waste carbon dots (TWCDs) was undertaken by FTIR and 1H NMR techniques, revealing their most relevant features. In solid state, transmission electron microscopy (TEM) analysis showed the presence of nearly spherical nanoparticles with an average lateral size of 8.1 nm. Likewise, the topographical assessment by atomic force microscopy (AFM) also indicated particles’ heights between 3 and 10 nm. Their photophysical properties, revealed by UV–Vis, steady-state, and time-resolved fluorescence spectroscopies, are fully discussed. Higher photoluminescent quantum yields (up to 0.08) were attained when the biomass residues were mixed with organic aliphatic amines during the Mw-HTC process. Emission tunability is a characteristic feature of these CDs, which display an intensity average fluorescence lifetime of 8 ns. The new TWCDs demonstrated good antioxidant properties by the ABTS radical cation method (75% inhibition at TWCDs’ concentration of 5 mg/mL), which proved to be related to the dwell time used in the CDs synthesis. Moreover, the synthesized TWCDs suppressed the growth of Escherichia coli and Staphylococcus aureus at concentrations higher than 2000 μg/mL, encouraging future antibacterial applications.
- Open Access
- 8 December 2023
- Published by MDPI AG in Medical Sciences Forum
- Vol. 23 (1) , 3
Green Synthesis of Luminescent Carbon Nanomaterials from Porphyridium cruentum Microalgae
Microalgae (µAlgae) biomass was employed as a sustainable source for the synthesis of fluorescent carbon dots (μAlgae-CNDs) using a hydrothermal carbonization method and ethylenediamine (ED) as a nitrogen additive. The μAlgae-CNDs synthesized with a ratio of 0.64 of ED did not show cytotoxicity against non-tumor NIH 3T3 cells and sarcoma S180 cells, revealing some potential attractive properties for bioimaging.
- 8 December 2023
- Published by MDPI AG in Medical Sciences Forum
- Vol. 23 (1) , 3
Open AccessGreen Synthesis of Luminescent Carbon Nanomaterials from Porphyridium cruentum Microalgae
Microalgae (µAlgae) biomass was employed as a sustainable source for the synthesis of fluorescent carbon dots (μAlgae-CNDs) using a hydrothermal carbonization method and ethylenediamine (ED) as a nitrogen additive. The μAlgae-CNDs synthesized with a ratio of 0.64 of ED did not show cytotoxicity against non-tumor NIH 3T3 cells and sarcoma S180 cells, revealing some potential attractive properties for bioimaging.
- Open Access
- 15 November 2023
- Published by MDPI AG in Chemistry Proceedings
- Vol. 14 (1) , 4
Carbon Dots from Porphyridium cruentum Microalgae by High-Efficient Hydrothermal Approaches: Biocompatibility and Antioxidant Capabilities
Fluorescent carbon dots (µAlgae-CDs) were successfully prepared from renewable Porphyridium cruentum biomass using a hydrothermal carbonization approach and ethylenediamine (ED) as a nitrogen additive. Structural and photophysical properties of the as-synthesized nanomaterials were evaluated using FTIR, UV-Vis, and fluorescence spectroscopies. The new µAlgae-CDs synthesized with a ratio of 0.16 of ED demonstrated good antioxidant properties by ABTS radical cation method and did not exhibit cytotoxicity against non-tumor Vero cells and tumor HeLa cells, showing potential application in bioimaging.
- 15 November 2023
- Published by MDPI AG in Chemistry Proceedings
- Vol. 14 (1) , 4
Open AccessCarbon Dots from Porphyridium cruentum Microalgae by High-Efficient Hydrothermal Approaches: Biocompatibility and Antioxidant Capabilities
Fluorescent carbon dots (µAlgae-CDs) were successfully prepared from renewable Porphyridium cruentum biomass using a hydrothermal carbonization approach and ethylenediamine (ED) as a nitrogen additive. Structural and photophysical properties of the as-synthesized nanomaterials were evaluated using FTIR, UV-Vis, and fluorescence spectroscopies. The new µAlgae-CDs synthesized with a ratio of 0.16 of ED demonstrated good antioxidant properties by ABTS radical cation method and did not exhibit cytotoxicity against non-tumor Vero cells and tumor HeLa cells, showing potential application in bioimaging.
- Open Access
- 1 December 2022
- Published by MDPI AG in Engineering Proceedings
- Vol. 31 (1) , 66
Selection of Conventional Photoinitiators to Produce Biocompatible UV Epoxidized Soybean Oil Resin Mixtures for 3D Printing Technology
The use of natural-based resins as matrices for 3D printing is currently an expanding area with a considerable potential to explore. These materials, in addition to presenting high biocompatibility, come from renewable natural resources, causing them to be very attractive in terms of cost and environmental benefits. In the production of objects using photopolymerization, natural-based resins can be used with photoinitiators, causing them to be amenable to UV-curing. Thus, the choice of natural resins, photoinitiators, and light sources, which allow for proposing new formulations, with the biocompatibility properties of the natural material, and can compete with those available on the market, justify research in this area. Within this context, five conventional photoinitiators, namely benzophenone, 2,2-dimethoxy-2-phenylacetophenone, ethylphenyl (2,4,6-trimetylbenzoyl) phosphinate, 2-chlorothioxannthen-9-one, and 2-isopropylthioxanthone, were tested and evaluated to promote UV curing a natural resin derived from epoxidized soybean oil. Different mixtures were prepared, with 1 to 0.01% of photoinitiators (w/w, initial resin basis) and operational parameters, such as time and wave-length source, were tested. Cured mixtures were evaluated concerning their physicochemical structures and mechanical and biological properties. The results showed that, of the five photoinitiators studied, the most suitable to produce epoxidized soybean oil resin mixtures for 3D printing was ethylphenyl (2,4,6-trimetylbenzoyl) phosphinate. With its use, even in reduced amounts 0.01% (w/w), it was possible to produce transparent films and print pieces using stereolithography, with greater thickness, than those displayed by similar pieces prepared from mixtures of the same resin with other photoinitiators. The mechanical properties were similar to those obtained for the pieces produced with a commercial resin, which was used as a reference, and no antibacterial activity was evidenced against Escherichia coli and Staphylococcus aureus by these new materials.
- 1 December 2022
- Published by MDPI AG in Engineering Proceedings
- Vol. 31 (1) , 66
Open AccessSelection of Conventional Photoinitiators to Produce Biocompatible UV Epoxidized Soybean Oil Resin Mixtures for 3D Printing Technology
The use of natural-based resins as matrices for 3D printing is currently an expanding area with a considerable potential to explore. These materials, in addition to presenting high biocompatibility, come from renewable natural resources, causing them to be very attractive in terms of cost and environmental benefits. In the production of objects using photopolymerization, natural-based resins can be used with photoinitiators, causing them to be amenable to UV-curing. Thus, the choice of natural resins, photoinitiators, and light sources, which allow for proposing new formulations, with the biocompatibility properties of the natural material, and can compete with those available on the market, justify research in this area. Within this context, five conventional photoinitiators, namely benzophenone, 2,2-dimethoxy-2-phenylacetophenone, ethylphenyl (2,4,6-trimetylbenzoyl) phosphinate, 2-chlorothioxannthen-9-one, and 2-isopropylthioxanthone, were tested and evaluated to promote UV curing a natural resin derived from epoxidized soybean oil. Different mixtures were prepared, with 1 to 0.01% of photoinitiators (w/w, initial resin basis) and operational parameters, such as time and wave-length source, were tested. Cured mixtures were evaluated concerning their physicochemical structures and mechanical and biological properties. The results showed that, of the five photoinitiators studied, the most suitable to produce epoxidized soybean oil resin mixtures for 3D printing was ethylphenyl (2,4,6-trimetylbenzoyl) phosphinate. With its use, even in reduced amounts 0.01% (w/w), it was possible to produce transparent films and print pieces using stereolithography, with greater thickness, than those displayed by similar pieces prepared from mixtures of the same resin with other photoinitiators. The mechanical properties were similar to those obtained for the pieces produced with a commercial resin, which was used as a reference, and no antibacterial activity was evidenced against Escherichia coli and Staphylococcus aureus by these new materials.
- Open Access
Protective Responses at the Biochemical and Molecular Level Differ between a Coffea arabica L. Hybrid and Its Parental Genotypes to Supra-Optimal Temperatures and Elevated Air [CO2]
Climate changes with global warming associated with rising atmospheric [CO2] can strongly impact crop performance, including coffee, which is one of the most world’s traded agricultural commodities. Therefore, it is of utmost importance to understand the mechanisms of heat tolerance and the potential role of elevated air CO2 (eCO2) in the coffee plant response, particularly regarding the antioxidant and other protective mechanisms, which are crucial for coffee plant acclimation. For that, plants of Coffea arabica cv. Geisha 3, cv. Marsellesa and their hybrid (Geisha 3 × Marsellesa) were grown for 2 years at 25/20 °C (day/night), under 400 (ambient CO2, aCO2) or 700 µL (elevated CO2, eCO2) CO2 L−1, and then gradually submitted to a temperature increase up to 42/30 °C, followed by recovery periods of 4 (Rec4) and 14 days (Rec14). Heat (37/28 °C and/or 42/30 °C) was the major driver of the response of the studied protective molecules and associated genes in all genotypes. That was the case for carotenoids (mostly neoxanthin and lutein), but the maximal (α + β) carotenes pool was found at 37/28 °C only in Marsellesa. All genes (except VDE) encoding for antioxidative enzymes (catalase, CAT; superoxide dismutases, CuSODs; ascorbate peroxidases, APX) or other protective proteins (HSP70, ELIP, Chape20, Chape60) were strongly up-regulated at 37/28 °C, and, especially, at 42/30 °C, in all genotypes, but with maximal transcription in Hybrid plants. Accordingly, heat greatly stimulated the activity of APX and CAT (all genotypes) and glutathione reductase (Geisha3, Hybrid) but not of SOD. Notably, CAT activity increased even at 42/30 °C, concomitantly with a strongly declined APX activity. Therefore, increased thermotolerance might arise through the reinforcement of some ROS-scavenging enzymes and other protective molecules (HSP70, ELIP, Chape20, Chape60). Plants showed low responsiveness to single eCO2 under unstressed conditions, while heat promoted changes in aCO2 plants. Only eCO2 Marsellesa plants showed greater contents of lutein, the pool of the xanthophyll cycle components (V + A + Z), and β-carotene, compared to aCO2 plants at 42/30 °C. This, together with a lower CAT activity, suggests a lower presence of H2O2, likely also associated with the higher photochemical use of energy under eCO2. An incomplete heat stress recovery seemed evident, especially in aCO2 plants, as judged by the maintenance of the greater expression of all genes in all genotypes and increased levels of zeaxanthin (Marsellesa and Hybrid) relative to their initial controls. Altogether, heat was the main response driver of the addressed protective molecules and genes, whereas eCO2 usually attenuated the heat response and promoted a better recovery. Hybrid plants showed stronger gene expression responses, especially at the highest temperature, when compared to their parental genotypes, but altogether, Marsellesa showed a greater acclimation potential. The reinforcement of antioxidative and other protective molecules are, therefore, useful biomarkers to be included in breeding and selection programs to obtain coffee genotypes to thrive under global warming conditions, thus contributing to improved crop sustainability.
Open AccessProtective Responses at the Biochemical and Molecular Level Differ between a Coffea arabica L. Hybrid and Its Parental Genotypes to Supra-Optimal Temperatures and Elevated Air [CO2]
Climate changes with global warming associated with rising atmospheric [CO2] can strongly impact crop performance, including coffee, which is one of the most world’s traded agricultural commodities. Therefore, it is of utmost importance to understand the mechanisms of heat tolerance and the potential role of elevated air CO2 (eCO2) in the coffee plant response, particularly regarding the antioxidant and other protective mechanisms, which are crucial for coffee plant acclimation. For that, plants of Coffea arabica cv. Geisha 3, cv. Marsellesa and their hybrid (Geisha 3 × Marsellesa) were grown for 2 years at 25/20 °C (day/night), under 400 (ambient CO2, aCO2) or 700 µL (elevated CO2, eCO2) CO2 L−1, and then gradually submitted to a temperature increase up to 42/30 °C, followed by recovery periods of 4 (Rec4) and 14 days (Rec14). Heat (37/28 °C and/or 42/30 °C) was the major driver of the response of the studied protective molecules and associated genes in all genotypes. That was the case for carotenoids (mostly neoxanthin and lutein), but the maximal (α + β) carotenes pool was found at 37/28 °C only in Marsellesa. All genes (except VDE) encoding for antioxidative enzymes (catalase, CAT; superoxide dismutases, CuSODs; ascorbate peroxidases, APX) or other protective proteins (HSP70, ELIP, Chape20, Chape60) were strongly up-regulated at 37/28 °C, and, especially, at 42/30 °C, in all genotypes, but with maximal transcription in Hybrid plants. Accordingly, heat greatly stimulated the activity of APX and CAT (all genotypes) and glutathione reductase (Geisha3, Hybrid) but not of SOD. Notably, CAT activity increased even at 42/30 °C, concomitantly with a strongly declined APX activity. Therefore, increased thermotolerance might arise through the reinforcement of some ROS-scavenging enzymes and other protective molecules (HSP70, ELIP, Chape20, Chape60). Plants showed low responsiveness to single eCO2 under unstressed conditions, while heat promoted changes in aCO2 plants. Only eCO2 Marsellesa plants showed greater contents of lutein, the pool of the xanthophyll cycle components (V + A + Z), and β-carotene, compared to aCO2 plants at 42/30 °C. This, together with a lower CAT activity, suggests a lower presence of H2O2, likely also associated with the higher photochemical use of energy under eCO2. An incomplete heat stress recovery seemed evident, especially in aCO2 plants, as judged by the maintenance of the greater expression of all genes in all genotypes and increased levels of zeaxanthin (Marsellesa and Hybrid) relative to their initial controls. Altogether, heat was the main response driver of the addressed protective molecules and genes, whereas eCO2 usually attenuated the heat response and promoted a better recovery. Hybrid plants showed stronger gene expression responses, especially at the highest temperature, when compared to their parental genotypes, but altogether, Marsellesa showed a greater acclimation potential. The reinforcement of antioxidative and other protective molecules are, therefore, useful biomarkers to be included in breeding and selection programs to obtain coffee genotypes to thrive under global warming conditions, thus contributing to improved crop sustainability.
- Open Access
- 2 August 2022
- Published by Elsevier in Journal of Plant Physiology
- Vol. 276, 153788
High-resolution shotgun proteomics reveals that increased air [CO2] amplifies the acclimation response of Coffea species to drought regarding antioxidative, energy, sugar, and lipid dynamics
- 2 August 2022
- Published by Elsevier in Journal of Plant Physiology
- Vol. 276, 153788
Open AccessHigh-resolution shotgun proteomics reveals that increased air [CO2] amplifies the acclimation response of Coffea species to drought regarding antioxidative, energy, sugar, and lipid dynamics
- Open Access
Next-Generation Proteomics Reveals a Greater Antioxidative Response to Drought in Coffea arabica Than in Coffea canephora
Drought is a major threat to coffee, compromising the quality and quantity of its production. We have analyzed the core proteome of 18 Coffea canephora cv. Conilon Clone 153 and C. arabica cv. Icatu plants and assessed their responses to moderate (MWD) and severe (SWD) water deficits. Label-free quantitative shotgun proteomics identified 3000 proteins in both genotypes, but less than 0.8% contributed to ca. 20% of proteome biomass. Proteomic changes were dependent on the severity of drought, being stronger under SWD and with an enrolment of different proteins, functions, and pathways than under MWD. The two genotypes displayed stress-responsive proteins under SWD, but only C. arabica showed a higher abundance of proteins involved in antioxidant detoxification activities. Overall, the impact of MWD was minor in the two genotypes, contrary to previous studies. In contrast, an extensive proteomic response was found under SWD, with C. arabica having a greater potential for acclimation/resilience than C. canephora. This is likely supported by a wider antioxidative response and an ability to repair photosynthetic structures, being crucial to develop new elite genotypes that assure coffee supply under water scarcity levels.
Open AccessNext-Generation Proteomics Reveals a Greater Antioxidative Response to Drought in Coffea arabica Than in Coffea canephora
Drought is a major threat to coffee, compromising the quality and quantity of its production. We have analyzed the core proteome of 18 Coffea canephora cv. Conilon Clone 153 and C. arabica cv. Icatu plants and assessed their responses to moderate (MWD) and severe (SWD) water deficits. Label-free quantitative shotgun proteomics identified 3000 proteins in both genotypes, but less than 0.8% contributed to ca. 20% of proteome biomass. Proteomic changes were dependent on the severity of drought, being stronger under SWD and with an enrolment of different proteins, functions, and pathways than under MWD. The two genotypes displayed stress-responsive proteins under SWD, but only C. arabica showed a higher abundance of proteins involved in antioxidant detoxification activities. Overall, the impact of MWD was minor in the two genotypes, contrary to previous studies. In contrast, an extensive proteomic response was found under SWD, with C. arabica having a greater potential for acclimation/resilience than C. canephora. This is likely supported by a wider antioxidative response and an ability to repair photosynthetic structures, being crucial to develop new elite genotypes that assure coffee supply under water scarcity levels.
- 19 November 2020
- Published by Oxford University Press (OUP) in Tree Physiology
- Vol. 41 (5) , 708-727
Intrinsic non-stomatal resilience to drought of the photosynthetic apparatus in Coffea spp. is strengthened by elevated air [CO2]
Growing water restrictions associated with climate changes constitute daunting challenges to crop performance. This study unveils the impacts of moderate (MWD) or severe (SWD) water deficit, and their interaction with air [CO2], on the photosynthetic apparatus of Coffea canephora Pierre ex A. Froehner cv. Conilon Clone 153 (CL153) and Coffea arabica L. cv. Icatu. Seven year-old potted plants grown under 380 (aCO2) or 700 μl l −1 (eCO2) [CO2] gradually reached predawn water potentials between −1.6 and −2.1 MPa (MWD), and below −3.5 MPa (SWD). Under drought, stomata closure was chiefly related to abscisic acid (ABA) rise. Increasing drought severity progressively affected gas exchange and fluorescence parameters in both genotypes, with non-stomatal limitations becoming gradually dominating, especially regarding the photochemical and biochemical components of CL153 SWD plants. In contrast, Icatu plants were highly tolerant to SWD, with minor, if any, negative impacts on the potential photosynthetic functioning and components (e.g., Amax, Fv/Fm, electron carriers, photosystems (PSs) and ribulose-1,5-bisphosphate carboxylase oxygenase (RuBisCO) activities). Besides, drought-stressed Icatu plants displayed increased abundance of a large set of proteins associated with the photosynthetic apparatus (PSs, light-harvesting complexes, cyclic electron flow, RuBisCO activase) regardless of [CO2]. Single eCO2 did not promote stomatal and photosynthetic down-regulation in both genotypes. Instead, eCO2 increased photosynthetic performance, moderately reinforced photochemical (PSs activity, electron carriers) and biochemical (RuBisCO, ribulose-5-phosphate kinase) components, whereas photoprotective mechanisms and protein abundance remained mostly unaffected. In both genotypes, under MWD, eCO2 superimposition delayed stress severity and promoted photosynthetic functioning with lower energy dissipation and PSII impacts, whereas stomatal closure was decoupled from increases in ABA. In SWD plants, most impacts on the photosynthetic performance were reduced by eCO2, especially in the moderately drought affected CL153 genotype, although maintaining RuBisCO as the most sensitive component, deserving special breeder’s attention to improve coffee sustainability under future climate scenarios.
- 19 November 2020
- Published by Oxford University Press (OUP) in Tree Physiology
- Vol. 41 (5) , 708-727
Intrinsic non-stomatal resilience to drought of the photosynthetic apparatus in Coffea spp. is strengthened by elevated air [CO2]
Growing water restrictions associated with climate changes constitute daunting challenges to crop performance. This study unveils the impacts of moderate (MWD) or severe (SWD) water deficit, and their interaction with air [CO2], on the photosynthetic apparatus of Coffea canephora Pierre ex A. Froehner cv. Conilon Clone 153 (CL153) and Coffea arabica L. cv. Icatu. Seven year-old potted plants grown under 380 (aCO2) or 700 μl l −1 (eCO2) [CO2] gradually reached predawn water potentials between −1.6 and −2.1 MPa (MWD), and below −3.5 MPa (SWD). Under drought, stomata closure was chiefly related to abscisic acid (ABA) rise. Increasing drought severity progressively affected gas exchange and fluorescence parameters in both genotypes, with non-stomatal limitations becoming gradually dominating, especially regarding the photochemical and biochemical components of CL153 SWD plants. In contrast, Icatu plants were highly tolerant to SWD, with minor, if any, negative impacts on the potential photosynthetic functioning and components (e.g., Amax, Fv/Fm, electron carriers, photosystems (PSs) and ribulose-1,5-bisphosphate carboxylase oxygenase (RuBisCO) activities). Besides, drought-stressed Icatu plants displayed increased abundance of a large set of proteins associated with the photosynthetic apparatus (PSs, light-harvesting complexes, cyclic electron flow, RuBisCO activase) regardless of [CO2]. Single eCO2 did not promote stomatal and photosynthetic down-regulation in both genotypes. Instead, eCO2 increased photosynthetic performance, moderately reinforced photochemical (PSs activity, electron carriers) and biochemical (RuBisCO, ribulose-5-phosphate kinase) components, whereas photoprotective mechanisms and protein abundance remained mostly unaffected. In both genotypes, under MWD, eCO2 superimposition delayed stress severity and promoted photosynthetic functioning with lower energy dissipation and PSII impacts, whereas stomatal closure was decoupled from increases in ABA. In SWD plants, most impacts on the photosynthetic performance were reduced by eCO2, especially in the moderately drought affected CL153 genotype, although maintaining RuBisCO as the most sensitive component, deserving special breeder’s attention to improve coffee sustainability under future climate scenarios.