Ryszard Boleslaw Nazarski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ryszard Boleslaw Nazarski has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Stanisław Leśniak
Department of Organic and Applied Chemistry, University of Łódź, Łódź, Poland
7 shared publications - Anna Chrostowska
Institute of Analytical and Physicochemical Sciences of the Environment and Materials, University of Pau and Pays of l'Adour, Pau, France
4 shared publications Romuald Skowroński
Department of Organic Chemistry, Institute of Chemistry, University of Łódź, 90‐136 Łódź 1, P.O. Box 376, Poland
4 shared publicationsSaïd Khayar
Université de Pau et des Pays de l'Adour, Institut des Sciences Analytiques et de Physico-Chimie pour l'Environnement et les Matériaux UMR CNRS 5254, 64000 Pau, France, http://iprem-ecp.univ-pau.fr/live/personnel/anna_chrostowska
3 shared publicationsAlain Dargelos
Université de Pau et des Pays de l'Adour, Institut des Sciences Analytiques et de Physico-Chimie pour l'Environnement et les Matériaux UMR CNRS 5254, 64000 Pau, France, http://iprem-ecp.univ-pau.fr/live/personnel/anna_chrostowska
2 shared publications- Andrzej Jóźwiak
Department of Organic Chemistry; Faculty of Chemistry; University of Łódź; 91-403 Łódź Poland
2 shared publications
Latest Publications
- 23 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (44) , 10263-10275
Molecular Structure of a Model S -Alkylthiolanium Ionic Liquid Based on NMR Measurements and DFT Predictions for Its Enantiomeric C–H···I – Hydrogen Bonded Units Achieved in an Unusual Use of QST2 and IRC Methods
Using atypical input geometries that led to asymmetric transition state (TS) structures, it was possible to construct the raw geometries of a majority of both units of the title ionic liquid 1a of type A/B in the D2O solution, mainly in a combination of QST2 and IRC methods. Their refinement in all-electron DFT-B3LYP calculations using a locally dense basis sets (LDBS) approach led to 34 complete pairs A/B as binary sets of enantiomeric forms of type A and B, which, according to time-averaged NMR spectra and calculated Gibbs free energy (ΔG) data, exist in a fast symmetrical two-site exchange A ⇌ B. The availability of these structurally diverse structures, in which iodine ion (I-) occupies various spatial positions, stabilized by weak C-H···I- hydrogen bonds confirmed by QTAIM analysis, made it possible to test selected DFT methods to calculate the δH, δC, and nJHH data against their experimental values. A modified joint two-nucleus approach (1H/13C) with factor mH = 6 was also used. The efficiency of these predictions for an ensemble of all pairs A/B, which is the multicomponent molecular structure of 1a at the theoretical level used, was analyzed in light of their populations arising from consideration of ΔG data.
- 23 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (44) , 10263-10275
Molecular Structure of a Model S -Alkylthiolanium Ionic Liquid Based on NMR Measurements and DFT Predictions for Its Enantiomeric C–H···I – Hydrogen Bonded Units Achieved in an Unusual Use of QST2 and IRC Methods
Using atypical input geometries that led to asymmetric transition state (TS) structures, it was possible to construct the raw geometries of a majority of both units of the title ionic liquid 1a of type A/B in the D2O solution, mainly in a combination of QST2 and IRC methods. Their refinement in all-electron DFT-B3LYP calculations using a locally dense basis sets (LDBS) approach led to 34 complete pairs A/B as binary sets of enantiomeric forms of type A and B, which, according to time-averaged NMR spectra and calculated Gibbs free energy (ΔG) data, exist in a fast symmetrical two-site exchange A ⇌ B. The availability of these structurally diverse structures, in which iodine ion (I-) occupies various spatial positions, stabilized by weak C-H···I- hydrogen bonds confirmed by QTAIM analysis, made it possible to test selected DFT methods to calculate the δH, δC, and nJHH data against their experimental values. A modified joint two-nucleus approach (1H/13C) with factor mH = 6 was also used. The efficiency of these predictions for an ensemble of all pairs A/B, which is the multicomponent molecular structure of 1a at the theoretical level used, was analyzed in light of their populations arising from consideration of ΔG data.
- Open Access
Unexpected Formation of 6-(1H-Benzo[d]imidazol-2-yl)-1-phenyl-hexan-1-one and Its Structure in Solution and Solid State Analyzed in the Context of Tautomerism
The structure of the title compound (4d), unexpectedly obtained in the reaction between o-phenylenediamine and 2-benzoylcyclohexanone instead of the target 3H-benzo[b][1,4]diazepine derivative 3d, was determined spectroscopically in solution and by a single-crystal X-ray diffraction (XRD) study. It involves two enantiomeric rotamers, called forms D and U, of which the structure was elucidated based on NMR spectra measured and predicted in DFT-GIAO calculations. An averaging of δCs for all tautomeric positions in the benzimidazole part of the 4d hydrate studied in wet (probably slightly acidic) CDCl3 unambiguously indicates tautomeric exchange in its imidazole unit. An XRD analysis of this material confirms the existence of only one tautomer in the solid phase. The non-covalent interactions forming between molecules of water and benzimidazole derivative are shorter than the sum of van der Waals radii and create an infinite-chain hydrogen bond motif along the b-axis. A possible mechanism for the observed cyclocondensation is also proposed.
Open AccessUnexpected Formation of 6-(1H-Benzo[d]imidazol-2-yl)-1-phenyl-hexan-1-one and Its Structure in Solution and Solid State Analyzed in the Context of Tautomerism
The structure of the title compound (4d), unexpectedly obtained in the reaction between o-phenylenediamine and 2-benzoylcyclohexanone instead of the target 3H-benzo[b][1,4]diazepine derivative 3d, was determined spectroscopically in solution and by a single-crystal X-ray diffraction (XRD) study. It involves two enantiomeric rotamers, called forms D and U, of which the structure was elucidated based on NMR spectra measured and predicted in DFT-GIAO calculations. An averaging of δCs for all tautomeric positions in the benzimidazole part of the 4d hydrate studied in wet (probably slightly acidic) CDCl3 unambiguously indicates tautomeric exchange in its imidazole unit. An XRD analysis of this material confirms the existence of only one tautomer in the solid phase. The non-covalent interactions forming between molecules of water and benzimidazole derivative are shorter than the sum of van der Waals radii and create an infinite-chain hydrogen bond motif along the b-axis. A possible mechanism for the observed cyclocondensation is also proposed.
- 26 February 2024
- Published by Wiley in Magnetic Resonance in Chemistry
- Vol. 62 (7) , 535-543
Ambient temperature 1H/13C NMR spectra of sodium 3‐(trimethylsilyl)propane‐1‐sulfonate (DSS) in D2O referenced to external TMS: A discussion of these and closely related results. Corrections for the bulk magnetic susceptibility effect for aqueous NMR samples
This study aimed to obtain the title spectra and verify the temperature dependence of δDSS of the HOD signal from D2O of the NMR sample. However, the analysis of the collected δX data, extended by the results of other closely related measurements reported in the literature, provided important guidelines for performing routine 1H/13C NMR spectra in aqueous solvents externally referenced to neat liquid TMS contained in a coaxial capillary. Therefore, it is recommended that the previously proposed correction of δX data thus determined, which is mainly due to the difference in volume magnetic susceptibility χv between the sample and the external standard used, usually called the bulk magnetic susceptibility (BMS) correction, has been increased by +0.05 ppm (7%). The new value of this correction, +0.73 ppm, based on NMR experiments carried out at a standard temperature of 25°C, was confirmed in a classical approach using critically reviewed χm, χM, and ρ data for TMS, D2O, and H2O. The BMS correction for H2O solutions is +0.75 ppm. Important issues concerning magnetic susceptibility measurements for D2O and H2O, coaxial bulb‐ended inserts, and the geometry of two‐tube NMR cells (shape factor αav) are also critically discussed here, partly from a historical perspective.
- 26 February 2024
- Published by Wiley in Magnetic Resonance in Chemistry
- Vol. 62 (7) , 535-543
Ambient temperature 1H/13C NMR spectra of sodium 3‐(trimethylsilyl)propane‐1‐sulfonate (DSS) in D2O referenced to external TMS: A discussion of these and closely related results. Corrections for the bulk magnetic susceptibility effect for aqueous NMR samples
This study aimed to obtain the title spectra and verify the temperature dependence of δDSS of the HOD signal from D2O of the NMR sample. However, the analysis of the collected δX data, extended by the results of other closely related measurements reported in the literature, provided important guidelines for performing routine 1H/13C NMR spectra in aqueous solvents externally referenced to neat liquid TMS contained in a coaxial capillary. Therefore, it is recommended that the previously proposed correction of δX data thus determined, which is mainly due to the difference in volume magnetic susceptibility χv between the sample and the external standard used, usually called the bulk magnetic susceptibility (BMS) correction, has been increased by +0.05 ppm (7%). The new value of this correction, +0.73 ppm, based on NMR experiments carried out at a standard temperature of 25°C, was confirmed in a classical approach using critically reviewed χm, χM, and ρ data for TMS, D2O, and H2O. The BMS correction for H2O solutions is +0.75 ppm. Important issues concerning magnetic susceptibility measurements for D2O and H2O, coaxial bulb‐ended inserts, and the geometry of two‐tube NMR cells (shape factor αav) are also critically discussed here, partly from a historical perspective.
- Open Access
On the Use of Deuterated Organic Solvents without TMS to Report 1H/13C NMR Spectral Data of Organic Compounds: Current State of the Method, Its Pitfalls and Benefits, and Related Issues
The quite popular, simple but imperfect method of referencing NMR spectra to residual 1H and 13C signals of TMS-free deuterated organic solvents (referred to as Method A) is critically discussed for six commonly used NMR solvents with respect to their δH and δC values that exist in the literature. Taking into account the most reliable data, it was possible to recommend ‘best’ δX values for such secondary internal standards. The position of these reference points on the δ scale strongly depends on the concentration and type of analyte under study and the solvent medium used. For some solvents, chemically induced shifts (CISs) of residual 1H lines were considered, also taking into account the formation of 1:1 molecular complexes (for CDCl3). Typical potential errors that can occur as a result of improper application of Method A are considered in detail. An overview of all found δX values adopted by users of this method revealed a discrepancy of up to 1.9 ppm in δC reported for CDCl3, most likely caused by the CIS mentioned above. The drawbacks of Method A are discussed in relation to the classical use of an internal standard (Method B), two ‘instrumental’ schemes in which Method A is often implicitly applied, that is, the default Method C using 2H lock frequencies and Method D based on Ξ values, recommended by the IUPAC but only occasionally used for 1H/13C spectra, and external referencing (Method E). Analysis of current needs and opportunities for NMR spectrometers led to the conclusion that, for the most accurate application of Method A, it is necessary to (a) use dilute solutions in a single NMR solvent and (b) to report δX data applied for the reference 1H/13C signals to the nearest 0.001/0.01 ppm to ensure the precise characterization of new synthesized or isolated organic systems, especially those with complex or unexpected structures. However, the use of TMS in Method B is strongly recommended in all such cases.
Open AccessOn the Use of Deuterated Organic Solvents without TMS to Report 1H/13C NMR Spectral Data of Organic Compounds: Current State of the Method, Its Pitfalls and Benefits, and Related Issues
The quite popular, simple but imperfect method of referencing NMR spectra to residual 1H and 13C signals of TMS-free deuterated organic solvents (referred to as Method A) is critically discussed for six commonly used NMR solvents with respect to their δH and δC values that exist in the literature. Taking into account the most reliable data, it was possible to recommend ‘best’ δX values for such secondary internal standards. The position of these reference points on the δ scale strongly depends on the concentration and type of analyte under study and the solvent medium used. For some solvents, chemically induced shifts (CISs) of residual 1H lines were considered, also taking into account the formation of 1:1 molecular complexes (for CDCl3). Typical potential errors that can occur as a result of improper application of Method A are considered in detail. An overview of all found δX values adopted by users of this method revealed a discrepancy of up to 1.9 ppm in δC reported for CDCl3, most likely caused by the CIS mentioned above. The drawbacks of Method A are discussed in relation to the classical use of an internal standard (Method B), two ‘instrumental’ schemes in which Method A is often implicitly applied, that is, the default Method C using 2H lock frequencies and Method D based on Ξ values, recommended by the IUPAC but only occasionally used for 1H/13C spectra, and external referencing (Method E). Analysis of current needs and opportunities for NMR spectrometers led to the conclusion that, for the most accurate application of Method A, it is necessary to (a) use dilute solutions in a single NMR solvent and (b) to report δX data applied for the reference 1H/13C signals to the nearest 0.001/0.01 ppm to ensure the precise characterization of new synthesized or isolated organic systems, especially those with complex or unexpected structures. However, the use of TMS in Method B is strongly recommended in all such cases.
- 10 January 2022
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 197 (8) , 788-798
1H NMR spectra, structure, and conformational exchange of S-n-alkyl-tetrahydrothiophenium cations of some ionic liquids
S-n-alkyl-tetrahydrothiophenium cations [R-THT]+ in some iodide or tetraphenylborate ion-pairs [R-THT][X] (R = methyl to n-decyl, X−= I−, [BPh4] −, [NTf2] −) are characterized in the solid state by puckered THT rings in twist forms. In contrast, solution 1H NMR spectra of compounds [R-THT][X] indicate a rapid conformational exchange leading to dynamic [ABCD]2 spin systems due to eight protons of the THT ring. These strongly coupled spectra obtained at high magnetic fields were analyzed by iterative methods and simulated successfully. In addition, molecular modeling and gauge-including atomic orbitals (GIAOs) based calculations of proton NMR chemical shifts for two such ion-pair compounds in solution were performed at the density functional theory (DFT) level . As a result, conformational equilibrium between two different pairs of isoenergetic twist forms of the THT ring in [Me-THT][I] (global and local energy minima) was found to exist. These theoretical results are discussed in view of experimental 1H NMR spectral data. Graphical Abstract
- 10 January 2022
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 197 (8) , 788-798
1H NMR spectra, structure, and conformational exchange of S-n-alkyl-tetrahydrothiophenium cations of some ionic liquids
S-n-alkyl-tetrahydrothiophenium cations [R-THT]+ in some iodide or tetraphenylborate ion-pairs [R-THT][X] (R = methyl to n-decyl, X−= I−, [BPh4] −, [NTf2] −) are characterized in the solid state by puckered THT rings in twist forms. In contrast, solution 1H NMR spectra of compounds [R-THT][X] indicate a rapid conformational exchange leading to dynamic [ABCD]2 spin systems due to eight protons of the THT ring. These strongly coupled spectra obtained at high magnetic fields were analyzed by iterative methods and simulated successfully. In addition, molecular modeling and gauge-including atomic orbitals (GIAOs) based calculations of proton NMR chemical shifts for two such ion-pair compounds in solution were performed at the density functional theory (DFT) level . As a result, conformational equilibrium between two different pairs of isoenergetic twist forms of the THT ring in [Me-THT][I] (global and local energy minima) was found to exist. These theoretical results are discussed in view of experimental 1H NMR spectral data. Graphical Abstract
- 26 August 2019
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 84 (18) , 11425-11440
Unexpected Rearrangement of Dilithiated Isoindoline-1,3-diols into 3-Aminoindan-1-ones viaN-Lithioaminoarylcarbenes: A Combined Synthetic and Computational Study
The reaction of 2-aryl-3-hydroxyisoindolin-1-ones with the s-BuLi●TMEDA system in THF at -78oC, affording a series of diastereomeric 3-aminoindan-1-ones via a novel rearrangement of the isoindolinone scaffold, is reported. It is proposed that α-elimination of LiOH from the transient N,O-dilithiated hemiaminal carbenoids leads to the formation of singlet carbenes followed by their trapping via an internal C-H insertion. An alternative explanation based on an intramolecular Mannich reaction seems to be less probable. A mechanistic-type study that combines spectroscopic data of the products and calculation results, with a special focus on the diverse lithiated intermediates that are most likely to engage in the title process (particularly those with internal Li-bonds), is presented. The MP2 approach, involving also the NPA and QTAIM data, provided insight into structures and properties of all these species. Two reaction routes A and B appeared to be possible for the postulated carbene mechanism. An unusual metamorphosis of the CCN atom triad, from a near sp 1-azaallene-type in more stable non-carbene Li enolates to a roughly sp2 type in their carbene keto tautomers, is recognized in one of these pathways (route B). Dominant forms of resonance structures for the aforementioned tautomeric systems that have seven-membered quasi rings stabilized by Li+ ions bridging the N- and carbonyl O-atoms, are indicated. Large computational difficulties arising from a huge impact of internal Li+ complexation on conformational preferences and electronic properties of carbonyl group-bearing lithium derivatives are also discussed. The new γ-keto carbene species under study belong to a subclass of acyclic amino-aryl-carbenes (AAACs)
- 26 August 2019
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 84 (18) , 11425-11440
Unexpected Rearrangement of Dilithiated Isoindoline-1,3-diols into 3-Aminoindan-1-ones viaN-Lithioaminoarylcarbenes: A Combined Synthetic and Computational Study
The reaction of 2-aryl-3-hydroxyisoindolin-1-ones with the s-BuLi●TMEDA system in THF at -78oC, affording a series of diastereomeric 3-aminoindan-1-ones via a novel rearrangement of the isoindolinone scaffold, is reported. It is proposed that α-elimination of LiOH from the transient N,O-dilithiated hemiaminal carbenoids leads to the formation of singlet carbenes followed by their trapping via an internal C-H insertion. An alternative explanation based on an intramolecular Mannich reaction seems to be less probable. A mechanistic-type study that combines spectroscopic data of the products and calculation results, with a special focus on the diverse lithiated intermediates that are most likely to engage in the title process (particularly those with internal Li-bonds), is presented. The MP2 approach, involving also the NPA and QTAIM data, provided insight into structures and properties of all these species. Two reaction routes A and B appeared to be possible for the postulated carbene mechanism. An unusual metamorphosis of the CCN atom triad, from a near sp 1-azaallene-type in more stable non-carbene Li enolates to a roughly sp2 type in their carbene keto tautomers, is recognized in one of these pathways (route B). Dominant forms of resonance structures for the aforementioned tautomeric systems that have seven-membered quasi rings stabilized by Li+ ions bridging the N- and carbonyl O-atoms, are indicated. Large computational difficulties arising from a huge impact of internal Li+ complexation on conformational preferences and electronic properties of carbonyl group-bearing lithium derivatives are also discussed. The new γ-keto carbene species under study belong to a subclass of acyclic amino-aryl-carbenes (AAACs)
- 12 January 2018
- Published by Wiley in Chemphyschem
- Vol. 19 (5) , 631-642
Shortfall of B3LYP in Reproducing NMR JCH Couplings in Some Isomeric Epoxy Structures with Strong Stereoelectronic Effects: A Benchmark Study on DFT Functionals
Unprecedented scatter plots of calculated versus measured NMR 2,3JCH coupling constants in six densely oxygen functionalized epoxides are found with some B3LYP protocols, an effect attributed to stereoelectronic effects. Hence, 26 other exchange‐correlation density functionals (xc DFs) are benchmarked in this work. Very good results are achieved with mPW1PW91 and PBE0 in conjunction with the pcJ‐1 basis set (BS) of moderate size. A thorough statistical analysis of 53 relationships between the predicted and observed 2,3JCH datasets is presented. The effects of some xc DFs, including their x and c parts, and BSs on the calculation results are discussed, also in the context of DFT modeling of electron‐density distributions. Moreover, related 1JCH datasets predicted with 11 different DF methods are considered and compared with the experimental data. Finally, some proposals for further improvement of existing DFs based on the available nJCH (n=1–3) values are briefly outlined, in line with recent results on the DFT electron densities.
- 12 January 2018
- Published by Wiley in Chemphyschem
- Vol. 19 (5) , 631-642
Shortfall of B3LYP in Reproducing NMR JCH Couplings in Some Isomeric Epoxy Structures with Strong Stereoelectronic Effects: A Benchmark Study on DFT Functionals
Unprecedented scatter plots of calculated versus measured NMR 2,3JCH coupling constants in six densely oxygen functionalized epoxides are found with some B3LYP protocols, an effect attributed to stereoelectronic effects. Hence, 26 other exchange‐correlation density functionals (xc DFs) are benchmarked in this work. Very good results are achieved with mPW1PW91 and PBE0 in conjunction with the pcJ‐1 basis set (BS) of moderate size. A thorough statistical analysis of 53 relationships between the predicted and observed 2,3JCH datasets is presented. The effects of some xc DFs, including their x and c parts, and BSs on the calculation results are discussed, also in the context of DFT modeling of electron‐density distributions. Moreover, related 1JCH datasets predicted with 11 different DF methods are considered and compared with the experimental data. Finally, some proposals for further improvement of existing DFs based on the available nJCH (n=1–3) values are briefly outlined, in line with recent results on the DFT electron densities.
- 23 November 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 120 (48) , 9519-9528
A Benefit of Using the IDSCRF- over UFF-Radii Cavities and Why Joint Correlations of NMR Chemical Shifts Can Be Advantageous: Condensed Pyridines as an IEF-PCM/GIAO/DFT Case Study
Herein, an advantage of the use of IDSCRF- over UFF-radii-based solute cavities in GIAO/DFT calculations is presented for the 13C and especially 15N NMR chemical shifts made for several bicyclic aromatic nitrogen heterocycles in CDCl3 solution treated within the classical IEF-PCM solvation scheme. Successful application of the IDSCRF-radii in the non 1:1 joint multinuclear 1H/13C and particularly 1H/13C/15N correlations of the measured δH,C(,N) values to those obtained theoretically is also documented for a series of test systems (−268 ≤ δN ≤ −72 ppm). The experimentally yet unknown δN’s were found in this way for the title compounds via a trinuclear eq 1 determined for an optimally chosen value of the multiplication factor of initial raw δH data (mH = 10). Such a simultaneous analysis of the δH,C(,N) data is proposed as a novel method to study the solution structure of the other similar conformationally homogeneous (bio)organic compounds. The issue of small spurious imaginary vibrational frequencies computed for a few molecular systems using the Gaussian 09 default UFF-radii is briefly considered as well.
- 23 November 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 120 (48) , 9519-9528
A Benefit of Using the IDSCRF- over UFF-Radii Cavities and Why Joint Correlations of NMR Chemical Shifts Can Be Advantageous: Condensed Pyridines as an IEF-PCM/GIAO/DFT Case Study
Herein, an advantage of the use of IDSCRF- over UFF-radii-based solute cavities in GIAO/DFT calculations is presented for the 13C and especially 15N NMR chemical shifts made for several bicyclic aromatic nitrogen heterocycles in CDCl3 solution treated within the classical IEF-PCM solvation scheme. Successful application of the IDSCRF-radii in the non 1:1 joint multinuclear 1H/13C and particularly 1H/13C/15N correlations of the measured δH,C(,N) values to those obtained theoretically is also documented for a series of test systems (−268 ≤ δN ≤ −72 ppm). The experimentally yet unknown δN’s were found in this way for the title compounds via a trinuclear eq 1 determined for an optimally chosen value of the multiplication factor of initial raw δH data (mH = 10). Such a simultaneous analysis of the δH,C(,N) data is proposed as a novel method to study the solution structure of the other similar conformationally homogeneous (bio)organic compounds. The issue of small spurious imaginary vibrational frequencies computed for a few molecular systems using the Gaussian 09 default UFF-radii is briefly considered as well.
- Open Access
- 17 February 2016
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 14 (11) , 3142-3158
Multi-conformer molecules in solutions: an NMR-based DFT/MP2 conformational study of two glucopyranosides of a vitamin E model compound
Overall geometries of both glucosyl derivatives of PMC were found on the basis of their NMR spectra in CDCl3and relatedδH,C/nJHHIEF-PCM(UFF,CHCl3)/DFT calculational results.
- 17 February 2016
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 14 (11) , 3142-3158
Open AccessMulti-conformer molecules in solutions: an NMR-based DFT/MP2 conformational study of two glucopyranosides of a vitamin E model compound
Overall geometries of both glucosyl derivatives of PMC were found on the basis of their NMR spectra in CDCl3and relatedδH,C/nJHHIEF-PCM(UFF,CHCl3)/DFT calculational results.
- Open Access
- 15 May 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (29) , 15699-15708
1JCH couplings in Group 14/IVA tetramethyls from the gas-phase NMR and DFT structural study: a search for the best computational protocol
The gas-phase 1J0,CHs in ‘isolated’ molecules of EMe4 were determined and discussed in terms of their geometric/electronic properties obtained from DFT calculations.
- 15 May 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (29) , 15699-15708
Open Access1JCH couplings in Group 14/IVA tetramethyls from the gas-phase NMR and DFT structural study: a search for the best computational protocol
The gas-phase 1J0,CHs in ‘isolated’ molecules of EMe4 were determined and discussed in terms of their geometric/electronic properties obtained from DFT calculations.