Antonio Álvarez Fernández-Balbuena
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antonio Álvarez Fernández-Balbuena has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
Daniel Vázquez-Moliní
Universidad Complutense de Madrid, Departamento de Óptica, Facultad de Óptica y Optometría, Madrid
17 shared publications- Berta Garcia-Fernandez
Departamento de Ingeniería y Gestión Forestal y Ambiental, Escuela Técnica Superior de Ingeniería de Montes, Forestal y del Medio Natural, Universidad Politécnica de Madrid, Ciudad Universitaria, 28040 Madrid, Spain
13 shared publications - Eusebio Bernabeu
Univ Complutense Madrid, Appl Opt Complutense Grp, Dept Opt, Fac Ciencias Fis, E-28040 Madrid, Spain
13 shared publications Daniel Vázquez
9 shared publications- Daniel Vázquez Molini
Department of Optics, University Complutense of Madrid, 28040 Madrid, Spain
9 shared publications - Juan Carlos Martínez Antón
Applied Optics Complutense Group, Facultad de Óptica y Optometría, Universidad Complutense de Madrid, Madrid, Spain
9 shared publications
Latest Publications
- Open Access
- 26 June 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Experimental characterization and luminance simulation of light propagation in smoke-filled environments
- 26 June 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessExperimental characterization and luminance simulation of light propagation in smoke-filled environments
- Open Access
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Photonic restoration on historic tapestries based on reverse-side colorimetry
The conservation of historic tapestries is essential to preserve their cultural relevance. Over time, natural dyes undergo irreversible chromatic degradation due to light exposure. This study presents a non-invasive spectral projection-based method, termed photonic restoration, to visually restore the original color and luminance of faded textiles without physical intervention. Unlike the obverse, the reverse of the tapestry preserves the original dyes because it remains protected from direct light exposure by a lining and serves as a reliable chromatic reference for the textile’s original condition. Spectral measurements of the obverse (faded) and reverse (well-preserved) sides were conducted on a historic tapestry fragment using a halogen source as a reference illuminant. Quantitative evaluation in the color space, under halogen illumination (300W), showed that initial color differences between the faded and reverse side ranged from 4.12 to 10.25, indicating a clearly perceptible loss of color. Similar chromatic differences between the exposed obverse and the protected reverse have been observed in other historic tapestries, with values exceeding 10 in some areas. After photonic restoration, most regions achieved final color differences , making the difference imperceptible to the human eye. Luminance measurements confirmed that the projected obverse accurately reproduces the brightness of the reverse. The proposed method provides a reversible and non-destructive approach for the chromatic restoration of historic textiles.
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhotonic restoration on historic tapestries based on reverse-side colorimetry
The conservation of historic tapestries is essential to preserve their cultural relevance. Over time, natural dyes undergo irreversible chromatic degradation due to light exposure. This study presents a non-invasive spectral projection-based method, termed photonic restoration, to visually restore the original color and luminance of faded textiles without physical intervention. Unlike the obverse, the reverse of the tapestry preserves the original dyes because it remains protected from direct light exposure by a lining and serves as a reliable chromatic reference for the textile’s original condition. Spectral measurements of the obverse (faded) and reverse (well-preserved) sides were conducted on a historic tapestry fragment using a halogen source as a reference illuminant. Quantitative evaluation in the color space, under halogen illumination (300W), showed that initial color differences between the faded and reverse side ranged from 4.12 to 10.25, indicating a clearly perceptible loss of color. Similar chromatic differences between the exposed obverse and the protected reverse have been observed in other historic tapestries, with values exceeding 10 in some areas. After photonic restoration, most regions achieved final color differences , making the difference imperceptible to the human eye. Luminance measurements confirmed that the projected obverse accurately reproduces the brightness of the reverse. The proposed method provides a reversible and non-destructive approach for the chromatic restoration of historic textiles.
- Open Access
The Influence of Projection Lamps on the Colors of Early Silent Cinema Films
Quantitative data on the colors of early film productions is very scarce but may be useful for preserving these cultural assets and for guiding modern digitization processes. We measured the spectral transmittance of 46 small areas in 13 frames of films from the 1910s and 1920s, which were colored using the same tinting process. From spectral measurements of the light source in an early carbon arc cinema projector, we computed CIELAB color coordinates for these areas and the results were compared with those from two more recent light sources: a Xenon lamp and an ultra-high performance (UHP) lamp. Average color inconstancy values for the 46 samples were 3.5, 7.9, and 7.0 CIELAB units for carbon-Xenon, carbon-UHP and Xenon-UHP changes, respectively, which are color differences above human visual thresholds for observers with normal color vision. Therefore, for accurate color specifications of such films, in addition to the spectral transmittances of frames, we must consider the spectral power distribution of projection lamps. Compared with a recent surface object-color gamut, the 46 samples were spread across a relatively wide region of color space, excluding CIELAB hue-angles in the range of 270–360 degrees.
Open AccessThe Influence of Projection Lamps on the Colors of Early Silent Cinema Films
Quantitative data on the colors of early film productions is very scarce but may be useful for preserving these cultural assets and for guiding modern digitization processes. We measured the spectral transmittance of 46 small areas in 13 frames of films from the 1910s and 1920s, which were colored using the same tinting process. From spectral measurements of the light source in an early carbon arc cinema projector, we computed CIELAB color coordinates for these areas and the results were compared with those from two more recent light sources: a Xenon lamp and an ultra-high performance (UHP) lamp. Average color inconstancy values for the 46 samples were 3.5, 7.9, and 7.0 CIELAB units for carbon-Xenon, carbon-UHP and Xenon-UHP changes, respectively, which are color differences above human visual thresholds for observers with normal color vision. Therefore, for accurate color specifications of such films, in addition to the spectral transmittances of frames, we must consider the spectral power distribution of projection lamps. Compared with a recent surface object-color gamut, the 46 samples were spread across a relatively wide region of color space, excluding CIELAB hue-angles in the range of 270–360 degrees.
- Open Access
- 22 October 2025
- Published by MDPI AG in Preprints.org
The Influence of Projection Lamps on the Colors of Tinted Old Cinema Frames
Quantitative data on the colors of early film productions is very scarce but may be useful for preserving these cultural assets and for guiding modern digitization processes. We measured the spectral transmittance of 46 small areas in 13 frames of films from the 1910s and 1920s, which were colored using the same tinting process. From spectral measure-ments of the light source in an early carbon arc cinema projector (Gaumont, Paris, 1913), we computed CIELAB color coordinates for these areas and the results were compared with those from two more recent light sources: a Xenon lamp and an ultra-high perfor-mance (UHP) lamp. Average color inconstancy values for the 46 samples were 2.4, 6.8, and 6.5 CIELAB units for carbon-Xenon, carbon-UHP and Xenon-UHP changes, respec-tively, which are color differences above human visual thresholds for observers with nor-mal color vision. Therefore, for accurate color specifications of such films, in addition to the spectral transmittances of frames we must consider the spectral power distribution of projection lamps. Compared with a recent surface object-color gamut, the 46 samples were spread across a relatively wide region of color space, excluding CIELAB hue-angles in the range of 270-360 degrees.
- 22 October 2025
- Published by MDPI AG in Preprints.org
Open AccessThe Influence of Projection Lamps on the Colors of Tinted Old Cinema Frames
Quantitative data on the colors of early film productions is very scarce but may be useful for preserving these cultural assets and for guiding modern digitization processes. We measured the spectral transmittance of 46 small areas in 13 frames of films from the 1910s and 1920s, which were colored using the same tinting process. From spectral measure-ments of the light source in an early carbon arc cinema projector (Gaumont, Paris, 1913), we computed CIELAB color coordinates for these areas and the results were compared with those from two more recent light sources: a Xenon lamp and an ultra-high perfor-mance (UHP) lamp. Average color inconstancy values for the 46 samples were 2.4, 6.8, and 6.5 CIELAB units for carbon-Xenon, carbon-UHP and Xenon-UHP changes, respec-tively, which are color differences above human visual thresholds for observers with nor-mal color vision. Therefore, for accurate color specifications of such films, in addition to the spectral transmittances of frames we must consider the spectral power distribution of projection lamps. Compared with a recent surface object-color gamut, the 46 samples were spread across a relatively wide region of color space, excluding CIELAB hue-angles in the range of 270-360 degrees.
- Open Access
Quantitative Automatic Non-Invasive Assessment of Material Degradation in Historic Tapestries
The conservation of historic tapestries is crucial due to the fragility of their materials and their cultural relevance. This paper reports on an investigation into the development of HeriTex, a non-invasive, innovative system for evaluating the structural integrity of historic tapestries, with a particular focus on measuring material loss. The research analyzed the relationship between transmitted infrared radiation and the weight loss per unit area (expressed in g/cm2) in the weakened areas of the tapestry. As a necessary first step, the system was calibrated using a limited range of wool thread weights before conducting experimental measurements on a historic tapestry fragment provided by the Royal Tapestry Factory in Madrid. The investigation demonstrated a strong correlation between the transmittance values and the loss of material weight per unit area. The results showed that the transmittance decreases exponentially as the weight per unit area increases. By applying a non-linear least squares (NLLS) fitting model, additional weight per unit area values in the tapestry were estimated based on their corresponding transmittance values. The HeriTex system enables the identification, quantification, and mapping of damage regions, demonstrating its potential as a valuable tool for more accurate assessment of the condition of historic tapestries by providing quantitative data on their structural integrity.
Open AccessQuantitative Automatic Non-Invasive Assessment of Material Degradation in Historic Tapestries
The conservation of historic tapestries is crucial due to the fragility of their materials and their cultural relevance. This paper reports on an investigation into the development of HeriTex, a non-invasive, innovative system for evaluating the structural integrity of historic tapestries, with a particular focus on measuring material loss. The research analyzed the relationship between transmitted infrared radiation and the weight loss per unit area (expressed in g/cm2) in the weakened areas of the tapestry. As a necessary first step, the system was calibrated using a limited range of wool thread weights before conducting experimental measurements on a historic tapestry fragment provided by the Royal Tapestry Factory in Madrid. The investigation demonstrated a strong correlation between the transmittance values and the loss of material weight per unit area. The results showed that the transmittance decreases exponentially as the weight per unit area increases. By applying a non-linear least squares (NLLS) fitting model, additional weight per unit area values in the tapestry were estimated based on their corresponding transmittance values. The HeriTex system enables the identification, quantification, and mapping of damage regions, demonstrating its potential as a valuable tool for more accurate assessment of the condition of historic tapestries by providing quantitative data on their structural integrity.
- Open Access
Artificial Vision System on Digital Devices for Real-Time Head Tilt Control
It is common to see cases in which, when performing tasks in close vision in front of a digital screen, the posture or position of the head is not adequate, especially in young people; it is essential to have a correct posture of the head to avoid visual, muscular, or joint problems. Most of the current systems to control head inclination require an external part attached to the subject’s head. The aim of this study is the validation of a procedure that, through a detection algorithm and eye tracking, can control the correct position of the head in real time when subjects are in front of a digital device. The system only needs a digital device with a CCD receiver and downloadable software through which we can detect the inclination of the head, indicating if a bad posture is adopted due to a visual problem or simply inadequate visual–postural habits, alerting us to the postural anomaly to correct it.The system was evaluated in subjects with disparate interpupillary distances, at different working distances in front of the digital device, and at each distance, different tilt angles were evaluated. The system evaluated favorably in different lighting environments, correctly detecting the subjects’ pupils. The results showed that for most of the variables, particularly good absolute and relative reliability values were found when measuring head tilt with lower accuracy than most of the existing systems. The evaluated results have been positive, making it a considerably inexpensive and easily affordable system for all users. It is the first application capable of measuring the head tilt of the subject at their working or reading distance in real time by tracking their eyes.
Open AccessArtificial Vision System on Digital Devices for Real-Time Head Tilt Control
It is common to see cases in which, when performing tasks in close vision in front of a digital screen, the posture or position of the head is not adequate, especially in young people; it is essential to have a correct posture of the head to avoid visual, muscular, or joint problems. Most of the current systems to control head inclination require an external part attached to the subject’s head. The aim of this study is the validation of a procedure that, through a detection algorithm and eye tracking, can control the correct position of the head in real time when subjects are in front of a digital device. The system only needs a digital device with a CCD receiver and downloadable software through which we can detect the inclination of the head, indicating if a bad posture is adopted due to a visual problem or simply inadequate visual–postural habits, alerting us to the postural anomaly to correct it.The system was evaluated in subjects with disparate interpupillary distances, at different working distances in front of the digital device, and at each distance, different tilt angles were evaluated. The system evaluated favorably in different lighting environments, correctly detecting the subjects’ pupils. The results showed that for most of the variables, particularly good absolute and relative reliability values were found when measuring head tilt with lower accuracy than most of the existing systems. The evaluated results have been positive, making it a considerably inexpensive and easily affordable system for all users. It is the first application capable of measuring the head tilt of the subject at their working or reading distance in real time by tracking their eyes.
- Open Access
- 30 April 2024
- Published by MDPI AG in Preprints.org
Artificial Vision System on Digital Devices for Real-Time Head Tilt Control
In the last decades we have experienced great social, cultural, and educational changes, spending more time performing tasks in near vision and less hours in outdoor activities, having more overexposure to digital screens, especially the youngest and increasingly from younger ages. It is common to see cases when performing tasks in near vision the posture or position of the head is not adequate, especially the youngest, being essential to have a correct posture of the head to avoid visual, muscular, or articular problems. We present a procedure to try to control the correct position of the head in real time when performing close-up activities. The aim is to detect the inclination of the head and to know if a bad position is adopted due to a visual problem or simply to inadequate visio-postural habits, warning us of the postural anomaly to correct it.
- 30 April 2024
- Published by MDPI AG in Preprints.org
Open AccessArtificial Vision System on Digital Devices for Real-Time Head Tilt Control
In the last decades we have experienced great social, cultural, and educational changes, spending more time performing tasks in near vision and less hours in outdoor activities, having more overexposure to digital screens, especially the youngest and increasingly from younger ages. It is common to see cases when performing tasks in near vision the posture or position of the head is not adequate, especially the youngest, being essential to have a correct posture of the head to avoid visual, muscular, or articular problems. We present a procedure to try to control the correct position of the head in real time when performing close-up activities. The aim is to detect the inclination of the head and to know if a bad position is adopted due to a visual problem or simply to inadequate visio-postural habits, warning us of the postural anomaly to correct it.
- Open Access
High-Dynamic-Range Spectral Reflectance for the Segmentation of Paint Pigment: Application to Dalí’s Oil Painting Dos Figuras (1926)
Restorers and curators in museums sometimes find it difficult to accurately segment areas of paintings that have been contaminated with other pigments or areas that need to be restored, and work on the painting needs to be carried out with minimum possible damage. It is therefore necessary to develop measurement systems and methods that facilitate this task in the least invasive way possible. The aim of this study was to obtain high-dynamic-range (HDR) spectral reflectance and spatial resolution for Dalí’s painting entitled Two Figures (1926) in order to segment a small area of black and white pigment that was affected by the contact transfer of reddish pigment from another painting. Using Hypermatrixcam to measure the HDR spectral reflectance developed by this research team, an HDR multispectral cube of 12 images was obtained for the band 470–690 nm in steps of 20 nm. With the values obtained for the spectral reflectance of the HDR cube, the colour of the area of paint affected by the transfer was studied by calculating the a*b* components with the CIELab system. These a*b* values were then used to define two methods of segmenting the exact areas in which there was a transfer of reddish pigment. The area studied in the painting was originally black, and the contamination with reddish pigment occupied 13.87% to 32% of the total area depending on the selected method. These different solutions can be explained because the lower limit is segmentation based on pure pigment and the upper limit considers red as an exclusion of non-black pigment. Over- and under-segmentation is a common problem described in the literature related to pigment selection. In this application case, as red pigment is not original and should be removed, curators will choose the method that selects the highest red area.
Open AccessHigh-Dynamic-Range Spectral Reflectance for the Segmentation of Paint Pigment: Application to Dalí’s Oil Painting Dos Figuras (1926)
Restorers and curators in museums sometimes find it difficult to accurately segment areas of paintings that have been contaminated with other pigments or areas that need to be restored, and work on the painting needs to be carried out with minimum possible damage. It is therefore necessary to develop measurement systems and methods that facilitate this task in the least invasive way possible. The aim of this study was to obtain high-dynamic-range (HDR) spectral reflectance and spatial resolution for Dalí’s painting entitled Two Figures (1926) in order to segment a small area of black and white pigment that was affected by the contact transfer of reddish pigment from another painting. Using Hypermatrixcam to measure the HDR spectral reflectance developed by this research team, an HDR multispectral cube of 12 images was obtained for the band 470–690 nm in steps of 20 nm. With the values obtained for the spectral reflectance of the HDR cube, the colour of the area of paint affected by the transfer was studied by calculating the a*b* components with the CIELab system. These a*b* values were then used to define two methods of segmenting the exact areas in which there was a transfer of reddish pigment. The area studied in the painting was originally black, and the contamination with reddish pigment occupied 13.87% to 32% of the total area depending on the selected method. These different solutions can be explained because the lower limit is segmentation based on pure pigment and the upper limit considers red as an exclusion of non-black pigment. Over- and under-segmentation is a common problem described in the literature related to pigment selection. In this application case, as red pigment is not original and should be removed, curators will choose the method that selects the highest red area.
- Open Access
- 7 September 2022
- Published by IntechOpen
Reflectance Measurements on Cultural Heritage
Cultural heritage is a valuable and characteristic symbol of every country. It should be handled with care and it must be exhaustively investigated and measured with non-destructive techniques. In this chapter, we will talk about different reflectance measurement techniques to obtain the conservation state of the artwork. With this reflectance characterization, conservators, and curators could soon determine the best maintenance procedures for restoration purposes. Also, a new technique for lighting will be discussed, where the artwork can be also photonically restored illuminating with the correct light in the desired area of the artwork using a spectrally selective projection system.
- 7 September 2022
- Published by IntechOpen
Open AccessReflectance Measurements on Cultural Heritage
Cultural heritage is a valuable and characteristic symbol of every country. It should be handled with care and it must be exhaustively investigated and measured with non-destructive techniques. In this chapter, we will talk about different reflectance measurement techniques to obtain the conservation state of the artwork. With this reflectance characterization, conservators, and curators could soon determine the best maintenance procedures for restoration purposes. Also, a new technique for lighting will be discussed, where the artwork can be also photonically restored illuminating with the correct light in the desired area of the artwork using a spectrally selective projection system.