Divita Mathur
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Divita Mathur has a total of 185 co-authors. Here are the top co-authors by number of shared publications:
- Igor L. Medintz
Center for Bio/Molecular Science and Engineering, Code 6900, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
29 shared publications - Sebastián A. Díaz
Center for Bio/Molecular Science and Engineering, Code 6900, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
19 shared publications - Joseph. S. Melinger
U.S. Naval Research Laboratory
13 shared publications - Paul D. Cunningham
Electronics Science and Technology Division Code 6800, U.S. Naval Research Laboratory 2 , Washington, District of Columbia 20375
9 shared publications - William B. Knowlton
Boise State University
8 shared publications - Bernard Yurke
Boise State University
7 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Ultrafast Non-Förster Energy Transfer in a DNA-Templated Cy3-Cy5 Assembly
Controlling electronic coupling between chromophores is central to the design of photonic materials, yet energy transfer at sub nanometer donor-acceptor separations, where the point-dipole Förster approximation becomes unreliable, remains difficult to probe experimentally. Here, we use a doublestranded DNA scaffold to position a Cy3 donor and a Cy5 acceptor within a few ångströms of each other and characterize their energy transfer using steady-state and femtosecond transient absorption spectroscopy, microsecond molecular dynamics and umbrella-sampling simulations, and TDDFT-based transition-charge (TrESP) coupling calculations. Absorption changes consistent with H-type heterodimer formation accompany a near-unity (0.96) energy-transfer efficiency, while Cy3 signal depletes and Cy5 signal rises within the ~200 fs instrument response. Simulations show that the Cy3 and Cy5 are moderately-to-strongly coupled in the vast majority of the thermal ensemble, leading to energy transfer lifetimes shorter than 150 fs, consistent with transient absorption measurements. These results establish DNA scaffolds as programmable platforms for accessing non-Förster energy-transfer regimes.
- 11 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessUltrafast Non-Förster Energy Transfer in a DNA-Templated Cy3-Cy5 Assembly
Controlling electronic coupling between chromophores is central to the design of photonic materials, yet energy transfer at sub nanometer donor-acceptor separations, where the point-dipole Förster approximation becomes unreliable, remains difficult to probe experimentally. Here, we use a doublestranded DNA scaffold to position a Cy3 donor and a Cy5 acceptor within a few ångströms of each other and characterize their energy transfer using steady-state and femtosecond transient absorption spectroscopy, microsecond molecular dynamics and umbrella-sampling simulations, and TDDFT-based transition-charge (TrESP) coupling calculations. Absorption changes consistent with H-type heterodimer formation accompany a near-unity (0.96) energy-transfer efficiency, while Cy3 signal depletes and Cy5 signal rises within the ~200 fs instrument response. Simulations show that the Cy3 and Cy5 are moderately-to-strongly coupled in the vast majority of the thermal ensemble, leading to energy transfer lifetimes shorter than 150 fs, consistent with transient absorption measurements. These results establish DNA scaffolds as programmable platforms for accessing non-Förster energy-transfer regimes.
- Open Access
- 3 November 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
Injectable Ultrahigh Molecular Weight Fluorescent Copolymers for Bioimaging and Surgical Guidance
Injectable fluorescent polymers can enable real-time surgical guidance and bioimaging, but combining high transparency, low cellular uptake, clinically relevant viscosity, and hydrolytic stability remains challenging. Here, we report ultrahigh molecular weight (UHMW, >106 g mol−1) fluorescent copolymers synthesized by photoiniferter RAFT polymerization as injectable biomaterials for fluorescent ophthalmic viscosurgical devices (OVDs). Simulation results showed that fluorophore-rich segments collapse, promoting aggregation and self-quenching, and identified random monomer distribution with low fluorophore loading as key design criteria. Guided by these insights, N,N-dimethylacrylamide was copolymerized with fluorescein acrylate (0.1−1 mol %) to produce poly(DMA-co-FluA) with molecular weights up to 1.4 MDa and bright green fluorescence under blue illumination. Compared with (meth)acrylate analogues, the acrylamide backbone provided access to UHMW and optical clarity while offering greater intrinsic hydrolytic stability. The 1.4 MDa copolymer matched commercial Healon GV viscosity at ∼30 wt %, exhibited a pronounced frequency-dependent decrease in complex viscosity, reduced HEK293 cellular internalization, and enabled ex vivo porcine-eye OVD visualization and visual assessment of residual material.
- 3 November 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
Open AccessInjectable Ultrahigh Molecular Weight Fluorescent Copolymers for Bioimaging and Surgical Guidance
Injectable fluorescent polymers can enable real-time surgical guidance and bioimaging, but combining high transparency, low cellular uptake, clinically relevant viscosity, and hydrolytic stability remains challenging. Here, we report ultrahigh molecular weight (UHMW, >106 g mol−1) fluorescent copolymers synthesized by photoiniferter RAFT polymerization as injectable biomaterials for fluorescent ophthalmic viscosurgical devices (OVDs). Simulation results showed that fluorophore-rich segments collapse, promoting aggregation and self-quenching, and identified random monomer distribution with low fluorophore loading as key design criteria. Guided by these insights, N,N-dimethylacrylamide was copolymerized with fluorescein acrylate (0.1−1 mol %) to produce poly(DMA-co-FluA) with molecular weights up to 1.4 MDa and bright green fluorescence under blue illumination. Compared with (meth)acrylate analogues, the acrylamide backbone provided access to UHMW and optical clarity while offering greater intrinsic hydrolytic stability. The 1.4 MDa copolymer matched commercial Healon GV viscosity at ∼30 wt %, exhibited a pronounced frequency-dependent decrease in complex viscosity, reduced HEK293 cellular internalization, and enabled ex vivo porcine-eye OVD visualization and visual assessment of residual material.
- Open Access
- 28 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
Enhancing FRET through DNA-Controlled Emitters and ENZ Metamaterials
Simultaneous nanoscale spatial control and macroscopic electromagnetic enhancement are critical for maximizing resonance energy transfer. However, conventional systems with photonic platforms suffer from stochastic emitter distributions and steep field gradients. Here we demonstrate a unified architecture combining programmable DNA molecular beacons with an epsilon-near-zero (ENZ) multilayer metamaterial. Using DNA scaffolds, donor–acceptor pairs (Atto425/Cy3.5) are structurally locked into closed (2 nm) and extended (8.16 nm) conformations within the ENZ near field. Time-resolved photoluminescence reveals accelerated donor decay and an increase in extended state energy transfer efficiency from 56.7% on glass to 79.4% on ENZ, corresponding to a 5.8-fold transfer rate acceleration. Electromagnetic Green tensor modeling confirms that ENZ boundary conditions strongly amplify dipole coupling within the first few nanometers of the interface, exhibiting pronounced orientation selectivity. This hybrid platform provides a deterministic orientational and spatial control for sculpting molecular-scale light–matter interactions.
- 28 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
Open AccessEnhancing FRET through DNA-Controlled Emitters and ENZ Metamaterials
Simultaneous nanoscale spatial control and macroscopic electromagnetic enhancement are critical for maximizing resonance energy transfer. However, conventional systems with photonic platforms suffer from stochastic emitter distributions and steep field gradients. Here we demonstrate a unified architecture combining programmable DNA molecular beacons with an epsilon-near-zero (ENZ) multilayer metamaterial. Using DNA scaffolds, donor–acceptor pairs (Atto425/Cy3.5) are structurally locked into closed (2 nm) and extended (8.16 nm) conformations within the ENZ near field. Time-resolved photoluminescence reveals accelerated donor decay and an increase in extended state energy transfer efficiency from 56.7% on glass to 79.4% on ENZ, corresponding to a 5.8-fold transfer rate acceleration. Electromagnetic Green tensor modeling confirms that ENZ boundary conditions strongly amplify dipole coupling within the first few nanometers of the interface, exhibiting pronounced orientation selectivity. This hybrid platform provides a deterministic orientational and spatial control for sculpting molecular-scale light–matter interactions.
- Open Access
Chemical modifications to enhance the stability of DNA nanoparticles for biological applications
- Open Access
- 25 September 2026
- Published by Springer Nature in MRS Communications
- p. 1-10
Predictive framework for degradation-aware plastic classification using spectroscopy and machine learning for proper recycling
- 25 September 2026
- Published by Springer Nature in MRS Communications
- p. 1-10
Open AccessPredictive framework for degradation-aware plastic classification using spectroscopy and machine learning for proper recycling
- Open Access
- 18 August 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (33) , 332001
From bench to chip: microfluidic integration for scalable DNA origami manufacturing and actuation
DNA origami is a nanofabrication technique where a long DNA scaffold is folded using locally complementary staple strands to create predesigned two- and three-dimensional structures with desired shapes, sizes, and surface functionalities. While many of these structures have been proposed for applications in biosensing, nanorobotics, and targeted therapeutic delivery, among others, translating this technology from the bench to clinical and industrial settings faces significant challenges, especially in reproducibility, process scalability, and control precision. Microfluidic platforms offer potential solutions to these limitations by providing accurate control, process automation, and easy integration of multiple workflow steps within lab-on-chip devices. This review examines the potential role of microfluidic technologies in DNA origami production, characterization and actuation, highlighting advantages and future directions.
- 18 August 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (33) , 332001
Open AccessFrom bench to chip: microfluidic integration for scalable DNA origami manufacturing and actuation
DNA origami is a nanofabrication technique where a long DNA scaffold is folded using locally complementary staple strands to create predesigned two- and three-dimensional structures with desired shapes, sizes, and surface functionalities. While many of these structures have been proposed for applications in biosensing, nanorobotics, and targeted therapeutic delivery, among others, translating this technology from the bench to clinical and industrial settings faces significant challenges, especially in reproducibility, process scalability, and control precision. Microfluidic platforms offer potential solutions to these limitations by providing accurate control, process automation, and easy integration of multiple workflow steps within lab-on-chip devices. This review examines the potential role of microfluidic technologies in DNA origami production, characterization and actuation, highlighting advantages and future directions.
- Open Access
- 23 June 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (29) , 3161-3174
Thermoresponsive Fluorescent Polymers: Influence of Size, Composition, and Architecture
Thermoresponsive fluorescent polymers (TFPs) provide a versatile platform for optical temperature sensing by coupling phase transitions with changes in fluorescence. Here, we report TFPs based on poly(N-isopropylacrylamide) (PNIPAM) and poly(ethylene glycol methacrylate) (PEGMA), incorporating fluorescein acrylate (FluA) as a model fluorophore via reversible addition-fragmentation chain transfer (RAFT) copolymerization. Linear and hyperbranched architectures were synthesized, with different compositions to position cloud point temperatures (Tcp) within a physiologically relevant temperature window, and their fluorescence behavior was investigated as a function of temperature, concentration, and pH. Distinct responses were observed across the Tcp, governed by the interplay between polymer collapse, microenvironmental confinement, and chromophore-chromophore interactions. Systems with low fluorescein loading exhibited fluorescence enhancement near the Tcp followed by quenching at higher temperatures, whereas higher loading systems showed predominantly decreased fluorescence intensity upon heating. Because all samples were compared at equal mass concentration, raw emission intensity scaled primarily with fluorophore loading per chain; we therefore interpret intensity differences cautiously and emphasize the temperature-dependent response as the diagnostic readout. Fluorescence intensity was strongly concentration-dependent, and pH studies revealed changes in both fluorescence intensity and emission maxima, with temperature-responsive fluorescence most prominent at pH 7 and moderately retained at pH 9. Rheological measurements further demonstrated changes in complex viscosity across the Tcp, linking macroscopic behavior to structural transitions. Hyperbranched polymers displayed responses distinct from their linear analogues. We summarize these observations as a set of provisional design rules that link each structural variable, such as composition, fluorophore loading, and architecture, to its dominant effect on Tcp, fluorescence, and viscosity. We note that several of these variables co-vary across the present sample set. Trends are therefore interpreted within controlled compositional windows rather than as fully orthogonal factors, and the resulting rules are intended as practical guidelines for designing polymer-based optical thermometers.
- 23 June 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (29) , 3161-3174
Open AccessThermoresponsive Fluorescent Polymers: Influence of Size, Composition, and Architecture
Thermoresponsive fluorescent polymers (TFPs) provide a versatile platform for optical temperature sensing by coupling phase transitions with changes in fluorescence. Here, we report TFPs based on poly(N-isopropylacrylamide) (PNIPAM) and poly(ethylene glycol methacrylate) (PEGMA), incorporating fluorescein acrylate (FluA) as a model fluorophore via reversible addition-fragmentation chain transfer (RAFT) copolymerization. Linear and hyperbranched architectures were synthesized, with different compositions to position cloud point temperatures (Tcp) within a physiologically relevant temperature window, and their fluorescence behavior was investigated as a function of temperature, concentration, and pH. Distinct responses were observed across the Tcp, governed by the interplay between polymer collapse, microenvironmental confinement, and chromophore-chromophore interactions. Systems with low fluorescein loading exhibited fluorescence enhancement near the Tcp followed by quenching at higher temperatures, whereas higher loading systems showed predominantly decreased fluorescence intensity upon heating. Because all samples were compared at equal mass concentration, raw emission intensity scaled primarily with fluorophore loading per chain; we therefore interpret intensity differences cautiously and emphasize the temperature-dependent response as the diagnostic readout. Fluorescence intensity was strongly concentration-dependent, and pH studies revealed changes in both fluorescence intensity and emission maxima, with temperature-responsive fluorescence most prominent at pH 7 and moderately retained at pH 9. Rheological measurements further demonstrated changes in complex viscosity across the Tcp, linking macroscopic behavior to structural transitions. Hyperbranched polymers displayed responses distinct from their linear analogues. We summarize these observations as a set of provisional design rules that link each structural variable, such as composition, fluorophore loading, and architecture, to its dominant effect on Tcp, fluorescence, and viscosity. We note that several of these variables co-vary across the present sample set. Trends are therefore interpreted within controlled compositional windows rather than as fully orthogonal factors, and the resulting rules are intended as practical guidelines for designing polymer-based optical thermometers.
- Open Access
In‑Situ ssDNA Isolation from dsDNA Sources as a Streamlined Pathway to DNA Origami Assembly and Testing
Scaffolded DNA origami has become a valuable nanoscale tool for applications in biomedical and physical sciences. Critical to leveraging the modular and programmable properties of DNA origami nanodevices is access to the scaffold strand, a long single-stranded DNA (ssDNA) of precise length and sequence, which is folded into a compact shape via piecewise base-pairing with many staple strands, short ssDNA oligonucleotides. Current methods to produce and manipulate long ssDNA scaffolds can be costly, time-consuming, and cumbersome. In contrast, methods to produce and manipulate the sequence of double-stranded DNA (dsDNA) are efficient and scalable. Here, we present a method for the rapid isolation of target ssDNA sequences from a variety of dsDNA sources using oligonucleotides as blocking strands that bind continuously to the undesired strand, thereby releasing the target scaffold strand. We report successful ssDNA isolation from linear and supercoiled dsDNAs of various sequences and lengths, ranging from 769 to 15,101 nucleotides. In addition to isolating ssDNA, we demonstrated this approach enables folding of DNA origami directly from dsDNA templates using both blocking and staple strands in a single-pot thermally controlled reaction. Furthermore, we explore multi-scaffold and gene-encoding DNA origami structures, expanding the framework for application-based designs. Graphical
Open AccessIn‑Situ ssDNA Isolation from dsDNA Sources as a Streamlined Pathway to DNA Origami Assembly and Testing
Scaffolded DNA origami has become a valuable nanoscale tool for applications in biomedical and physical sciences. Critical to leveraging the modular and programmable properties of DNA origami nanodevices is access to the scaffold strand, a long single-stranded DNA (ssDNA) of precise length and sequence, which is folded into a compact shape via piecewise base-pairing with many staple strands, short ssDNA oligonucleotides. Current methods to produce and manipulate long ssDNA scaffolds can be costly, time-consuming, and cumbersome. In contrast, methods to produce and manipulate the sequence of double-stranded DNA (dsDNA) are efficient and scalable. Here, we present a method for the rapid isolation of target ssDNA sequences from a variety of dsDNA sources using oligonucleotides as blocking strands that bind continuously to the undesired strand, thereby releasing the target scaffold strand. We report successful ssDNA isolation from linear and supercoiled dsDNAs of various sequences and lengths, ranging from 769 to 15,101 nucleotides. In addition to isolating ssDNA, we demonstrated this approach enables folding of DNA origami directly from dsDNA templates using both blocking and staple strands in a single-pot thermally controlled reaction. Furthermore, we explore multi-scaffold and gene-encoding DNA origami structures, expanding the framework for application-based designs. Graphical
- Open Access
Enhancing FRET through DNA-controlled Emitters and ENZ Metamaterials
The ability to significantly enhance energy transfer processes at the nanoscale requires the simultaneous optimization of molecular scale orientation and macroscopic photonic enhancement between multiple quantum emitters. However, achieving this dual control has remained a significant experimental challenge, often limited by the stochastic arrangement of emitter assemblies and spatially non-uniform electromagnetic fields in conventional photonic platforms. In this work, we demonstrate a unified architecture that achieves this synergy by combining the structural precision of DNA nanotechnology with the unique field environment generated by epsilon-near-zero (ENZ) materials. Using DNA molecular beacons as programmable emitter scaffolds, we establish fixed donor-acceptor separations and emitter orientations (Atto425/Cy3.5) in two well-defined conformational states: closed hairpin (emitter separation 2 nm), and open extended (7.2 nm) configurations. These structures are then embedded in the near-field of a multilayer ENZ metamaterial substrate, which facilitates spatially uniform, enhanced electromagnetic field coupling. Time-resolved photoluminescence measurements demonstrate a significant increase in FRET efficiency for DNA-programmed emitter pairs in the ENZ environment, compared to those on a glass substrate, corresponding to increased donor quenching and shortened donor lifetime. These results establish a scalable experimental pathway for engineering light-matter interactions at molecular scales, enabled by the structural precision of DNA paired with ENZ mediated redistribution of the local density of optical states (LDOS) to amplify near-filed coupling between quantum emitters, with applications in next-generation bio-sensing and quantum photonic technologies.
Open AccessEnhancing FRET through DNA-controlled Emitters and ENZ Metamaterials
The ability to significantly enhance energy transfer processes at the nanoscale requires the simultaneous optimization of molecular scale orientation and macroscopic photonic enhancement between multiple quantum emitters. However, achieving this dual control has remained a significant experimental challenge, often limited by the stochastic arrangement of emitter assemblies and spatially non-uniform electromagnetic fields in conventional photonic platforms. In this work, we demonstrate a unified architecture that achieves this synergy by combining the structural precision of DNA nanotechnology with the unique field environment generated by epsilon-near-zero (ENZ) materials. Using DNA molecular beacons as programmable emitter scaffolds, we establish fixed donor-acceptor separations and emitter orientations (Atto425/Cy3.5) in two well-defined conformational states: closed hairpin (emitter separation 2 nm), and open extended (7.2 nm) configurations. These structures are then embedded in the near-field of a multilayer ENZ metamaterial substrate, which facilitates spatially uniform, enhanced electromagnetic field coupling. Time-resolved photoluminescence measurements demonstrate a significant increase in FRET efficiency for DNA-programmed emitter pairs in the ENZ environment, compared to those on a glass substrate, corresponding to increased donor quenching and shortened donor lifetime. These results establish a scalable experimental pathway for engineering light-matter interactions at molecular scales, enabled by the structural precision of DNA paired with ENZ mediated redistribution of the local density of optical states (LDOS) to amplify near-filed coupling between quantum emitters, with applications in next-generation bio-sensing and quantum photonic technologies.
- Open Access
Tensile expansion microscopy applies mechanical force to super-resolve fixed and image live cellular samples
Understanding biophysical phenomena requires techniques that access biologically relevant spatial and temporal scales. Expansion Microscopy (ExM) is a sample preparation approach which achieves super-resolution spatial scales by leveraging osmotic forces in a swellable hydrogel to physically separate structures to distances larger than the diffraction limit of light. Yet, in traditional osmotic ExM only pre- and post- expanded samples can be imaged. Further, fragmentation, hydrogel deformation, and signal loss are common while requiring samples to be chemically fixed. Therefore, there is little control of the expansion, reproducibility can be challenging, and dynamics of biological samples at applicable temporal scales cannot be observed. Here, we develop Tensile Expansion Microscopy (TExM) to mechanically expand fixed and, notably, living cellular samples. Highly-stretchable and tough double network alginate- Ca 2+ /polyacrylamide hydrogels are expanded by tensile forces applied using an electromechanical iris expansion device during continuous imaging on a fluorescence microscope. We incorporate two-photon polymerized microscale fluorescent fiducial markers to track samples and distortion during expansion. The hydrogels controllably and repeatedly expand up to 3.3× with distortions less than 12 µm across 1.3 mm 2 . TExM is first applied to fixed NIH 3T3 fibroblast cells with immunohistochemistry-stained microtubules, achieving super-resolutions of 100 nm. Then, TExM is demonstrated with living HeLa cells with internal fluorescent reporters showing increased cell size and cell-to-cell separation under 3.2× linear expansion. Overall, TExM allows for continuous, stepwise, and precise temporal modulation of lateral substrate strain, enabling real time monitoring of dynamics of both fixed and viable live cell processes at higher spatial resolutions. TExM can further investigate broad biophysical questions due to its compatibility with other analytical imaging methods that are sensitive to water or fixatives used in traditional osmotic ExM.
Open AccessTensile expansion microscopy applies mechanical force to super-resolve fixed and image live cellular samples
Understanding biophysical phenomena requires techniques that access biologically relevant spatial and temporal scales. Expansion Microscopy (ExM) is a sample preparation approach which achieves super-resolution spatial scales by leveraging osmotic forces in a swellable hydrogel to physically separate structures to distances larger than the diffraction limit of light. Yet, in traditional osmotic ExM only pre- and post- expanded samples can be imaged. Further, fragmentation, hydrogel deformation, and signal loss are common while requiring samples to be chemically fixed. Therefore, there is little control of the expansion, reproducibility can be challenging, and dynamics of biological samples at applicable temporal scales cannot be observed. Here, we develop Tensile Expansion Microscopy (TExM) to mechanically expand fixed and, notably, living cellular samples. Highly-stretchable and tough double network alginate- Ca 2+ /polyacrylamide hydrogels are expanded by tensile forces applied using an electromechanical iris expansion device during continuous imaging on a fluorescence microscope. We incorporate two-photon polymerized microscale fluorescent fiducial markers to track samples and distortion during expansion. The hydrogels controllably and repeatedly expand up to 3.3× with distortions less than 12 µm across 1.3 mm 2 . TExM is first applied to fixed NIH 3T3 fibroblast cells with immunohistochemistry-stained microtubules, achieving super-resolutions of 100 nm. Then, TExM is demonstrated with living HeLa cells with internal fluorescent reporters showing increased cell size and cell-to-cell separation under 3.2× linear expansion. Overall, TExM allows for continuous, stepwise, and precise temporal modulation of lateral substrate strain, enabling real time monitoring of dynamics of both fixed and viable live cell processes at higher spatial resolutions. TExM can further investigate broad biophysical questions due to its compatibility with other analytical imaging methods that are sensitive to water or fixatives used in traditional osmotic ExM.