Ersen Arslan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ersen Arslan has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Caglar Uyulan
Izmir Katip Celebi University
4 shared publications - Mehmet Caliskan
Department of Mechanical Engineering, Middle East Technical University, 06800, Ankara, TURKEY
2 shared publications - İlHan Yılmaz
Borçelik Çelik San. ve Tic. A.Ş., Bursa, Turkey
1 shared publication - Kadir Çavdar
Department of Mechanical Engineering, Faculty of Engineering, Bursa Uludag University, 16059 Nilüfer, Bursa, Türkiye
1 shared publication Mehmet Çalişkan
Department of Mechanical Engineering, Middle East Technical University, Ankara, Turkey
1 shared publication- Turker Tekin Erguzel
Üsküdar University
1 shared publication
Latest Publications
- Open Access
- 15 May 2023
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 25 (74) , 433-450
Alan Odaklı Vektör Kontrol Yaklaşımı ile Elektrikli Scooter BLDCM için Kayan Kip Tabanlı Çekiş Kontrol Sistemi Tasarımı
Nowadays brushless DC motors (BLDCMs) are becoming indispensable components as the electrification revolution in the mobility industry is happening. Electric kick scooters, so-called e-scooters, are among these micro-mobility vehicles which are powered by these motors. Due to the uncertain and nonlinear features, the controller performance developed for these motors degrades. For these reasons, a chattering-reduced cascaded Sliding Mode Control (SMC) scheme to effectively track reference motor speed in the outer loop by eliminating torque ripples in the inner loop current control was designed. Field-oriented Control (FOC) methodology was used to implement the SMC in the BLDCM. An exponential reaching law algorithm was proposed for sliding surfaces of the inner and outer loop controllers. The suitability and performance of electric scooter-hub motors were analyzed in terms of traction control. A cascaded speed and torque controller produced significantly favorable results representing minimized torque and current ripples, and operation over a wide speed range.
- 15 May 2023
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 25 (74) , 433-450
Open AccessAlan Odaklı Vektör Kontrol Yaklaşımı ile Elektrikli Scooter BLDCM için Kayan Kip Tabanlı Çekiş Kontrol Sistemi Tasarımı
Nowadays brushless DC motors (BLDCMs) are becoming indispensable components as the electrification revolution in the mobility industry is happening. Electric kick scooters, so-called e-scooters, are among these micro-mobility vehicles which are powered by these motors. Due to the uncertain and nonlinear features, the controller performance developed for these motors degrades. For these reasons, a chattering-reduced cascaded Sliding Mode Control (SMC) scheme to effectively track reference motor speed in the outer loop by eliminating torque ripples in the inner loop current control was designed. Field-oriented Control (FOC) methodology was used to implement the SMC in the BLDCM. An exponential reaching law algorithm was proposed for sliding surfaces of the inner and outer loop controllers. The suitability and performance of electric scooter-hub motors were analyzed in terms of traction control. A cascaded speed and torque controller produced significantly favorable results representing minimized torque and current ripples, and operation over a wide speed range.
- Open Access
- 19 October 2022
- Published by MDPI AG in Preprints.org
Sliding Mode-based Traction Control System Design for Electric Scooter BLDCM through Field-Oriented Vector Control Approach
Nowadays brushless DC motors (BLDCMs) are becoming indispensable components as the electrification revolution in the mobility industry is happening. Electric kick scooters, so-called e-scooters, are among these micro-mobility vehicles which are powered by these motors. Due to the uncertain and nonlinear features, the controller performance developed for these motors degrades. For these reasons, a chattering-reduced cascaded Sliding Mode Control (SMC) scheme to effectively track reference motor speed in the outer loop by eliminating torque ripples in the inner loop current control was designed. Field-oriented Control (FOC) methodology was used to implement the SMC in the BLDCM. An exponential reaching law algorithm was proposed for sliding surfaces of the inner and outer loop controllers. The suitability and performance of electric scooter-hub motors were analyzed in terms of traction control. A cascaded speed and torque controller produced significantly favorable results representing minimized torque and current ripples, and operation over a wide speed range.
- 19 October 2022
- Published by MDPI AG in Preprints.org
Open AccessSliding Mode-based Traction Control System Design for Electric Scooter BLDCM through Field-Oriented Vector Control Approach
Nowadays brushless DC motors (BLDCMs) are becoming indispensable components as the electrification revolution in the mobility industry is happening. Electric kick scooters, so-called e-scooters, are among these micro-mobility vehicles which are powered by these motors. Due to the uncertain and nonlinear features, the controller performance developed for these motors degrades. For these reasons, a chattering-reduced cascaded Sliding Mode Control (SMC) scheme to effectively track reference motor speed in the outer loop by eliminating torque ripples in the inner loop current control was designed. Field-oriented Control (FOC) methodology was used to implement the SMC in the BLDCM. An exponential reaching law algorithm was proposed for sliding surfaces of the inner and outer loop controllers. The suitability and performance of electric scooter-hub motors were analyzed in terms of traction control. A cascaded speed and torque controller produced significantly favorable results representing minimized torque and current ripples, and operation over a wide speed range.
- 17 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 237 (7) , 1555-1571
Analysis of an e-scooter and rider system dynamic response to curb traversing through physics-informed machine learning methods
The use of big data to statistically evaluate system performance with the help of Machine Learning (ML) tools is a very popular method. Classic experimental methods of system performance can be impractical when needing to test a variety of input parameters within a range of specific limits and can take enormous time and effort. Mathematical models which numerically mimic the physical system dynamics can be deployed for the same aim. In this study, a system modeling based data analysis approach has been implemented to gather the data to understand the input-output relationship of an e-scooter and rider system in terms of its stability dynamics while driving over a curb of a specific height. Based on the test conditions specified in the German e-KFV standard, a virtual driving test has been created which consists of a kinematic e-scooter model with its rider and a test track. In the range of input parameter space, over 20,000 numbers of different cases have been solved and the results are recorded. The interaction between the rider and the vehicle is achieved through elastic connections which enable not only the recording of loading data on the arms and legs, but also allows the simulation to reflect the real-time effects of the rider scooter interaction. Through statistical analysis and using ML techniques, the influence of each parameter (tire size, speed, rider mass, etc.) on the objective outputs (loading on arms, ability to ascend the curb, etc.) regarding the stability and safety while driving over the curb have been reported and shared for further analysis by the e-scooter community.
- 17 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 237 (7) , 1555-1571
Analysis of an e-scooter and rider system dynamic response to curb traversing through physics-informed machine learning methods
The use of big data to statistically evaluate system performance with the help of Machine Learning (ML) tools is a very popular method. Classic experimental methods of system performance can be impractical when needing to test a variety of input parameters within a range of specific limits and can take enormous time and effort. Mathematical models which numerically mimic the physical system dynamics can be deployed for the same aim. In this study, a system modeling based data analysis approach has been implemented to gather the data to understand the input-output relationship of an e-scooter and rider system in terms of its stability dynamics while driving over a curb of a specific height. Based on the test conditions specified in the German e-KFV standard, a virtual driving test has been created which consists of a kinematic e-scooter model with its rider and a test track. In the range of input parameter space, over 20,000 numbers of different cases have been solved and the results are recorded. The interaction between the rider and the vehicle is achieved through elastic connections which enable not only the recording of loading data on the arms and legs, but also allows the simulation to reflect the real-time effects of the rider scooter interaction. Through statistical analysis and using ML techniques, the influence of each parameter (tire size, speed, rider mass, etc.) on the objective outputs (loading on arms, ability to ascend the curb, etc.) regarding the stability and safety while driving over the curb have been reported and shared for further analysis by the e-scooter community.
- 11 May 2021
- Published by Springer Nature in Acoustics Australia
- Vol. 49 (3) , 459-472
Experimental and Numerical Investigation of Sound Radiation from Thin Metal Plates with Different Thickness Values of Free Layer Damping Layers
- 11 May 2021
- Published by Springer Nature in Acoustics Australia
- Vol. 49 (3) , 459-472
Experimental and Numerical Investigation of Sound Radiation from Thin Metal Plates with Different Thickness Values of Free Layer Damping Layers
- Open Access
- 1 January 2020
- Published by Walter de Gruyter GmbH in Nonlinear Engineering
- Vol. 9 (1) , 124-144
Simulation and time-frequency analysis of the longitudinal train dynamics coupled with a nonlinear friction draft gear
Train safety and operational efficiency can be improved by investigating the dynamics of the train under varying conditions. Longitudinal train dynamics (LTD) simulations performed for such purposes, usually by utilising a nonlinear time-domain model. This paper covers two modes of LTD results corresponding to the time domain and frequency domain analysis. Time-domain solutions are essential to evaluate the full response used for parameter optimisation and controller design studies while frequency domain solutions can provide significant but straightforward clues regarding system dynamics. An advanced draft gear model, which works under a four-stage process is constructed considering all structural components, geometric relationships, friction modelling and dynamic characteristics such as hysteresis, stiffening, state transition, locked unloading, softening. Then, this model is parametrically reduced and implemented into an LTD simulation. The simulation in the time domain is conducted assuming a locomotive connected with a nine wagon via “ode3” fixed-step solver. The transfer function among the first wagon acceleration (output) and the locomotive force (input) estimated through system identification methodology. Then, the identification results interpreted by investigating step-response characteristic and best response giving parameter set is selected. Next, the modal and spectral analysis performed to reveal the behaviour of the in-train forces and the effects of vibration. This paper discusses a reliable methodology for the longitudinal dynamic analysis of the multi-bodied train in time and frequency domain and clarifies in-train vibration behaviour under the existence of sophisticated draft gear.
- 1 January 2020
- Published by Walter de Gruyter GmbH in Nonlinear Engineering
- Vol. 9 (1) , 124-144
Open AccessSimulation and time-frequency analysis of the longitudinal train dynamics coupled with a nonlinear friction draft gear
Train safety and operational efficiency can be improved by investigating the dynamics of the train under varying conditions. Longitudinal train dynamics (LTD) simulations performed for such purposes, usually by utilising a nonlinear time-domain model. This paper covers two modes of LTD results corresponding to the time domain and frequency domain analysis. Time-domain solutions are essential to evaluate the full response used for parameter optimisation and controller design studies while frequency domain solutions can provide significant but straightforward clues regarding system dynamics. An advanced draft gear model, which works under a four-stage process is constructed considering all structural components, geometric relationships, friction modelling and dynamic characteristics such as hysteresis, stiffening, state transition, locked unloading, softening. Then, this model is parametrically reduced and implemented into an LTD simulation. The simulation in the time domain is conducted assuming a locomotive connected with a nine wagon via “ode3” fixed-step solver. The transfer function among the first wagon acceleration (output) and the locomotive force (input) estimated through system identification methodology. Then, the identification results interpreted by investigating step-response characteristic and best response giving parameter set is selected. Next, the modal and spectral analysis performed to reveal the behaviour of the in-train forces and the effects of vibration. This paper discusses a reliable methodology for the longitudinal dynamic analysis of the multi-bodied train in time and frequency domain and clarifies in-train vibration behaviour under the existence of sophisticated draft gear.
- 11 August 2018
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 434, 261-272
Three dimensional axisymmetric sound propagation through a duct with aerosol
- 11 August 2018
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 434, 261-272
Three dimensional axisymmetric sound propagation through a duct with aerosol
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 955-960
Mobile robot localization via sensor fusion algorithms
In order to make effective works with the mobile robot and maximize its working performance, it is necessary to estimate and track the current pose of the mobile robot. In this paper, under the assumption that the initial pose, kinematics and environmental model of a mobile robot are known, the localization and tracking of the mobile robot's position and orientation have been carried out. The odometry model with the problem of accumulation of unlimited errors is used for tracking the pose, and sensor fusion algorithms are applied to solve this problem. By using the odometry and laser range finder model, the Extended Kalman Filter (EKF), Unscented Kalman Filter (UKF), Unscented Information Filter (UIF), Extended Information Filter (EIF) algorithms were tested on a graphical user interface (GUI) based on occupancy grid maps as an environment model, respectively. In this context, the pose tracking and estimation performances of the non-linear model based estimators are compared to each other. Since occupancy grid maps are utilized, only the laser range finder measurement uncertainty should be considered unlike feature based maps. In this way, the computational complexity can be reduced. When the simulation results are evaluated, it is determined that the Extended Information Filter algorithm has expressed more stable performance in terms of the mobile robot pose estimation.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 955-960
Mobile robot localization via sensor fusion algorithms
In order to make effective works with the mobile robot and maximize its working performance, it is necessary to estimate and track the current pose of the mobile robot. In this paper, under the assumption that the initial pose, kinematics and environmental model of a mobile robot are known, the localization and tracking of the mobile robot's position and orientation have been carried out. The odometry model with the problem of accumulation of unlimited errors is used for tracking the pose, and sensor fusion algorithms are applied to solve this problem. By using the odometry and laser range finder model, the Extended Kalman Filter (EKF), Unscented Kalman Filter (UKF), Unscented Information Filter (UIF), Extended Information Filter (EIF) algorithms were tested on a graphical user interface (GUI) based on occupancy grid maps as an environment model, respectively. In this context, the pose tracking and estimation performances of the non-linear model based estimators are compared to each other. Since occupancy grid maps are utilized, only the laser range finder measurement uncertainty should be considered unlike feature based maps. In this way, the computational complexity can be reduced. When the simulation results are evaluated, it is determined that the Extended Information Filter algorithm has expressed more stable performance in terms of the mobile robot pose estimation.
- 28 March 2017
- Published by World Scientific Pub Co Pte Ltd in Journal of Computational Acoustics
- Vol. 25 (01)
Numerical Analysis of One-Dimensional Sound Propagation Through a Duct Containing Water Droplets
In this paper sound propagation through an air-filled circular duct containing water droplets has been studied by solving numerically one-dimensional linearized Euler equations in frequency domain. Interactions between the liquid and gas phases were accounted for by proper source terms. Waves were introduced into the domain via Perfectly Matched Layers (PML) equations applied in finite regions adjacent to the truncated ends of the duct. Absorption and dispersion results due to energy transfer from air to the water droplets were obtained as a function of average droplet diameter and droplet concentration as well as finite mass loading. Results agree well with those available in the literature.
- 28 March 2017
- Published by World Scientific Pub Co Pte Ltd in Journal of Computational Acoustics
- Vol. 25 (01)
Numerical Analysis of One-Dimensional Sound Propagation Through a Duct Containing Water Droplets
In this paper sound propagation through an air-filled circular duct containing water droplets has been studied by solving numerically one-dimensional linearized Euler equations in frequency domain. Interactions between the liquid and gas phases were accounted for by proper source terms. Waves were introduced into the domain via Perfectly Matched Layers (PML) equations applied in finite regions adjacent to the truncated ends of the duct. Absorption and dispersion results due to energy transfer from air to the water droplets were obtained as a function of average droplet diameter and droplet concentration as well as finite mass loading. Results agree well with those available in the literature.
- 1 January 2016
- Published by Acoustical Society of America (ASA) in Proceedings of Meetings on Acoustics
Numerical study of mean flow effect on sound propagation through an aerosol
Previous studies on the sound attenuation and dispersion in an aerosol consisting of air and water droplets have been extended to accommodate mean flow effects. A numerical methodology based on solution of one dimensional, linearized Euler equations in the frequency domain has been developed. The interactions between the fluid and particle phases have been considered to be through momentum and heat exchange. In order to compare the numerical results, a theoretical solution which is valid for stationary medium has been extended to include flow effects. The attenuation and dispersion results are presented for different flow conditions and aerosol concentration levels. Both theoretical and numerical methods have proven the correctness of each other by yielding the same results. Accordingly, mean flow parameters (amplitude and direction) seem to have varying affects with respect to frequency both on attenuation and dispersion values. In addition, the level of aerosol concentration changes these outputs significantly, especially when it is at finite values.
- 1 January 2016
- Published by Acoustical Society of America (ASA) in Proceedings of Meetings on Acoustics
Numerical study of mean flow effect on sound propagation through an aerosol
Previous studies on the sound attenuation and dispersion in an aerosol consisting of air and water droplets have been extended to accommodate mean flow effects. A numerical methodology based on solution of one dimensional, linearized Euler equations in the frequency domain has been developed. The interactions between the fluid and particle phases have been considered to be through momentum and heat exchange. In order to compare the numerical results, a theoretical solution which is valid for stationary medium has been extended to include flow effects. The attenuation and dispersion results are presented for different flow conditions and aerosol concentration levels. Both theoretical and numerical methods have proven the correctness of each other by yielding the same results. Accordingly, mean flow parameters (amplitude and direction) seem to have varying affects with respect to frequency both on attenuation and dispersion values. In addition, the level of aerosol concentration changes these outputs significantly, especially when it is at finite values.