Rongrong Wang
Research Subjects
Rongrong Wang has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Chuan Hu
Shanghai Jiao Tong University
5 shared publications - Junmin Wang
The University of Texas at Austin
3 shared publications - Cong Li
School of Mechanical and Electrical Engineering, Guilin University of Aerospace Technology, Guilin 541004, China
2 shared publications Fengjun Yan
Department of Mechanical Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
2 shared publications- Fengjun Yan
McMaster Automotive Resource Center, McMaster University, Hamilton, ON, Canada
2 shared publications - Hamid Reza Karimi
Politecnico di Milano
2 shared publications
Latest Publications
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 56-62
Exploring the Effect of Pitching and Rolling Spine Angle for a Galloping Quadruped Robot via Trajectory Optimization
Existing research into the spinal morphology of quadruped robots predominantly simplifies it to a single degree of freedom (DOF) structure, a simplification that is valid for most locomotion gaits, but not optimally suited for a galloping gait where complex spinal movements could confer benefits. Observations of running cheetahs show that the elevation of the hips on the opposing sides of the torso is often uneven, suggesting a potential role of spinal torsion in locomotion. In this paper, a three DOF spine morphology is proposed, in which the front and rear torso have relative pitching DOF in the sagittal plane, while each has its own DOF in a rolling motion. Dynamic models are established for the front and rear torso separately, taking the rigid connection of the torso as constraints, and then motion planning is executed based on trajectory optimization. We adopt a galloping gait and compare this spinal morphology with the rigid torso and single DOF spinal morphology during the locomotion's rapid acceleration, constant high-speed running, and rapid deceleration phases. The results indicate that the DOF of the spine's pitch motion increases the stride between the front and rear legs, while the DOF of the rolling motion increases the stride between the left and right legs. It can be inferred that when the pitch joint angle of the spine is limited, the stride length can be further improved by adding the roll motion joints.
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 56-62
Exploring the Effect of Pitching and Rolling Spine Angle for a Galloping Quadruped Robot via Trajectory Optimization
Existing research into the spinal morphology of quadruped robots predominantly simplifies it to a single degree of freedom (DOF) structure, a simplification that is valid for most locomotion gaits, but not optimally suited for a galloping gait where complex spinal movements could confer benefits. Observations of running cheetahs show that the elevation of the hips on the opposing sides of the torso is often uneven, suggesting a potential role of spinal torsion in locomotion. In this paper, a three DOF spine morphology is proposed, in which the front and rear torso have relative pitching DOF in the sagittal plane, while each has its own DOF in a rolling motion. Dynamic models are established for the front and rear torso separately, taking the rigid connection of the torso as constraints, and then motion planning is executed based on trajectory optimization. We adopt a galloping gait and compare this spinal morphology with the rigid torso and single DOF spinal morphology during the locomotion's rapid acceleration, constant high-speed running, and rapid deceleration phases. The results indicate that the DOF of the spine's pitch motion increases the stride between the front and rear legs, while the DOF of the rolling motion increases the stride between the left and right legs. It can be inferred that when the pitch joint angle of the spine is limited, the stride length can be further improved by adding the roll motion joints.
- 24 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 225-233
Collision Avoidance of Wheel-Legged Robots on Complex Topography Based on Vertical Artificial Potential Field Method
The ability to navigate complex topography poses a significant challenge to the computational power of controllers for wheel-legged robots, as it requires the planning of the robot's motion path based on terrain height information and considering the sophisticated dynamics of the wheel-leg mechanism. Therefore, we propose a virtual force control method based on the vertical artificial potential field (APF) to address this problem. The virtual attractive and repulsive forces of the robot's center of mass (CoM) are obtained through pre-determined poles in the robot's body. We distribute the generalized virtual force to each tire by quadratic programming (QP) and then map it to the actuation joints of the legs and wheels. Additionally, a residual observer for external torque is implemented to determine the ground contact state of the wheels. The proposed control architecture is evaluated through simulations in the Simulink environment under conditions of obstacle avoidance and slope climbing. The results of these simulations demonstrate the effectiveness as well as potential of the proposed method in this paper.
- 24 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 225-233
Collision Avoidance of Wheel-Legged Robots on Complex Topography Based on Vertical Artificial Potential Field Method
The ability to navigate complex topography poses a significant challenge to the computational power of controllers for wheel-legged robots, as it requires the planning of the robot's motion path based on terrain height information and considering the sophisticated dynamics of the wheel-leg mechanism. Therefore, we propose a virtual force control method based on the vertical artificial potential field (APF) to address this problem. The virtual attractive and repulsive forces of the robot's center of mass (CoM) are obtained through pre-determined poles in the robot's body. We distribute the generalized virtual force to each tire by quadratic programming (QP) and then map it to the actuation joints of the legs and wheels. Additionally, a residual observer for external torque is implemented to determine the ground contact state of the wheels. The proposed control architecture is evaluated through simulations in the Simulink environment under conditions of obstacle avoidance and slope climbing. The results of these simulations demonstrate the effectiveness as well as potential of the proposed method in this paper.
- 22 July 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 97 (4) , 2425-2442
Adaptive nonlinear active suspension control based on a robust road classifier with a modified super-twisting algorithm
- 22 July 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 97 (4) , 2425-2442
Adaptive nonlinear active suspension control based on a robust road classifier with a modified super-twisting algorithm
- Top Cited Papers
- 10 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 21 (7) , 3091-3103
Lane Keeping Control of Autonomous Vehicles With Prescribed Performance Considering the Rollover Prevention and Input Saturation
This paper investigates the lane keeping control of autonomous ground vehicles (AGVs) considering the rollover prevention and input saturation. An enhanced state observer-based sliding mode control (SMC) strategy is proposed to achieve the control purpose and maintain the lane keeping errors as well as the roll angle within the prescribed performance boundaries. Three contributions are made in this paper. First, a prescribed performance function (PPF) is proposed in the controller design, aiming to implement the error transformation so as to constrain the controlled variables within the prescribed performance boundaries. Second, a modified sliding surface is developed incorporating two nonlinear functions, whose specialities and benefits are taken advantage of: one is a barrier function to restrict the load transfer ratio (LTR) in a safe boundary to guarantee the roll stability; another is a monotonely decreasing function to adaptively change the damping ratio of the closed-loop system to improve the transient performance, including reducing the transient overshoots and steady-state errors. Third, a modified multivariable adaptive SMC controller is proposed to achieve the integrated lane-keeping and roll control in the presence of the input saturation and bound-unknown disturbances. The stability of the closed-loop system is rigorously proved via the Lyapunov function. Finally, the effectiveness of the proposed control strategy is verified with a high-fidelity and full-car model via the CarSim platform.
- 10 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 21 (7) , 3091-3103
Top Cited PapersLane Keeping Control of Autonomous Vehicles With Prescribed Performance Considering the Rollover Prevention and Input Saturation
This paper investigates the lane keeping control of autonomous ground vehicles (AGVs) considering the rollover prevention and input saturation. An enhanced state observer-based sliding mode control (SMC) strategy is proposed to achieve the control purpose and maintain the lane keeping errors as well as the roll angle within the prescribed performance boundaries. Three contributions are made in this paper. First, a prescribed performance function (PPF) is proposed in the controller design, aiming to implement the error transformation so as to constrain the controlled variables within the prescribed performance boundaries. Second, a modified sliding surface is developed incorporating two nonlinear functions, whose specialities and benefits are taken advantage of: one is a barrier function to restrict the load transfer ratio (LTR) in a safe boundary to guarantee the roll stability; another is a monotonely decreasing function to adaptively change the damping ratio of the closed-loop system to improve the transient performance, including reducing the transient overshoots and steady-state errors. Third, a modified multivariable adaptive SMC controller is proposed to achieve the integrated lane-keeping and roll control in the presence of the input saturation and bound-unknown disturbances. The stability of the closed-loop system is rigorously proved via the Lyapunov function. Finally, the effectiveness of the proposed control strategy is verified with a high-fidelity and full-car model via the CarSim platform.
- 24 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 19 (2) , 627-638
Differential Steering Based Yaw Stabilization Using ISMC for Independently Actuated Electric Vehicles
Differential drive assistance steering (DDAS) is an emerging assisted steering mechanism in in-wheel-motor driven (IWMD) electric vehicles, yielded by the differential moment of the front tires in the steering system. DDAS can steer the front wheels when there is no steering power from the steering motor, and thus can be used as a redundant steering mechanism. To realize the yaw control when the active front steering entirely breaks down and guarantee the transient control performance therein, this paper proposes an integral sliding mode control (ISMC) approach for IWMD electric vehicles steered by DDAS. Two contributions are made in this paper: 1) An improved disturbance observer based ISMC strategy is designed to cope with the unknown mismatched disturbances, and the composite nonlinear feedback technique is employed to design the nominal part of the controller to restrain overshoots and remove steady-state errors considering the tire force saturations; 2) An adaptive super-twisting control approach is proposed to deal with the disturbances with unknown boundaries using a continuous controller while eliminating the chattering effect. The system stability and robustness are proved via Lyapunov approach. CarSim-Simulink simulation has verified the effectiveness of the proposed control approach in the case of the steering fault.
- 24 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 19 (2) , 627-638
Differential Steering Based Yaw Stabilization Using ISMC for Independently Actuated Electric Vehicles
Differential drive assistance steering (DDAS) is an emerging assisted steering mechanism in in-wheel-motor driven (IWMD) electric vehicles, yielded by the differential moment of the front tires in the steering system. DDAS can steer the front wheels when there is no steering power from the steering motor, and thus can be used as a redundant steering mechanism. To realize the yaw control when the active front steering entirely breaks down and guarantee the transient control performance therein, this paper proposes an integral sliding mode control (ISMC) approach for IWMD electric vehicles steered by DDAS. Two contributions are made in this paper: 1) An improved disturbance observer based ISMC strategy is designed to cope with the unknown mismatched disturbances, and the composite nonlinear feedback technique is employed to design the nominal part of the controller to restrain overshoots and remove steady-state errors considering the tire force saturations; 2) An adaptive super-twisting control approach is proposed to deal with the disturbances with unknown boundaries using a continuous controller while eliminating the chattering effect. The system stability and robustness are proved via Lyapunov approach. CarSim-Simulink simulation has verified the effectiveness of the proposed control approach in the case of the steering fault.
- 18 September 2017
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 40 (12) , 3477-3488
Robust path-following control for a fully actuated marine surface vessel with composite nonlinear feedback
This paper presents a fast and accurate robust path-following control approach for a fully actuated marine surface vessel in the presence of external disturbances. The path following is realized by simultaneously converging the yaw rate and sway velocity to their respective desired values, which are generated according to the path-following demand. An improved combined control strategy using an integral terminal sliding mode (ITSM) based composite nonlinear feedback (CNF) technique considering the external disturbances, time-varying tracking reference, input saturations and transient performance improvement is proposed in this study. The proposed ITSM-CNF combines the advantages of the CNF control in improving the transient performance and of the ITSM control in guaranteeing good robustness and finite-time convergence. A continuous and smooth sliding mode controller, based on an integral nonsingular terminal sliding surface, is added to the CNF controller to eliminate chattering. The overall stability of the closed-loop system is strictly proved based on the Lyapunov method. Simulations verify the effectiveness of the ITSM-CNF controller in improving the transient path-following performance, inhibiting overshoots, eliminating steady-state errors, rejecting external disturbances and removing chattering effects, considering input saturations, varying path curvature and finite-time convergence.
- 18 September 2017
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 40 (12) , 3477-3488
Robust path-following control for a fully actuated marine surface vessel with composite nonlinear feedback
This paper presents a fast and accurate robust path-following control approach for a fully actuated marine surface vessel in the presence of external disturbances. The path following is realized by simultaneously converging the yaw rate and sway velocity to their respective desired values, which are generated according to the path-following demand. An improved combined control strategy using an integral terminal sliding mode (ITSM) based composite nonlinear feedback (CNF) technique considering the external disturbances, time-varying tracking reference, input saturations and transient performance improvement is proposed in this study. The proposed ITSM-CNF combines the advantages of the CNF control in improving the transient performance and of the ITSM control in guaranteeing good robustness and finite-time convergence. A continuous and smooth sliding mode controller, based on an integral nonsingular terminal sliding surface, is added to the CNF controller to eliminate chattering. The overall stability of the closed-loop system is strictly proved based on the Lyapunov method. Simulations verify the effectiveness of the ITSM-CNF controller in improving the transient path-following performance, inhibiting overshoots, eliminating steady-state errors, rejecting external disturbances and removing chattering effects, considering input saturations, varying path curvature and finite-time convergence.
- Open Access
- 15 October 2015
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 48 (21) , 1165-1172
Fault-Tolerant Control of Four-Wheel Independently Actuated Electric Vehicles with Active Steering Systems
- 15 October 2015
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 48 (21) , 1165-1172
Open AccessFault-Tolerant Control of Four-Wheel Independently Actuated Electric Vehicles with Active Steering Systems
- 1 September 2015
- Published by Elsevier in Mechatronics
- Vol. 30, 259-260
Control and estimation of over-actuated vehicles
- 1 September 2015
- Published by Elsevier in Mechatronics
- Vol. 30, 259-260
Control and estimation of over-actuated vehicles
- 1 January 2015
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 48 (21) , 1180-1185
Fault-Tolerant Control of FWIA Electric Ground Vehicles with Differential Drive Assisted Steering
- 1 January 2015
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 48 (21) , 1180-1185
Fault-Tolerant Control of FWIA Electric Ground Vehicles with Differential Drive Assisted Steering