EJEric Johlin

Eric Johlin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Eric Johlin has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Climate change impacts on the predicted performance of optimized building-integrated photovoltaics

    by Elyas Hannoufa, Eric Johlin

    Building-integrated photovoltaics (BIPV) are a promising strategy for enhancing building energy performance and reducing carbon emissions. However, most design optimization studies rely on historical climate datasets that may fail to capture the operating conditions buildings will experience under climate change. This study develops a computational framework for the multi-objective optimization of BIPV envelope systems using future climate projections from the CanESM5 model under the SSP3-7.0 scenario. We analyze two system configurations, awning shades and thin-film window coatings, across four cities with diverse climates (Berlin, Los Angeles, Chicago, Singapore), comparing results from conventional EPW files, NASA 2023 historical data, and 2046–2050 climate scenarios. Optimization integrates electricity generation, thermal loads, and daylighting quality to capture building-level trade-offs. Results show that traditional EPW datasets systematically under-predict BIPV performance, particularly in Berlin and Los Angeles. Under 2046–2050 projected conditions, all four cities exhibit performance gains: substantial in Berlin, Chicago and Los Angeles, and marginal in Singapore, with the largest absolute gains in Los Angeles. By 2050, unshaded windows transition to consistently detrimental for building energy balance. Thin-film coatings achieve optimal outcomes at high absorptance, in the 80–90% range, contrary to current low-absorption design practice. Within the CanESM5 SSP3-7.0 scenario examined, these findings show that projected climate conditions can substantially reshape the modeled performance landscape of BIPV systems, emphasizing the need for forward-looking climate projections in building design optimization and the growing importance of BIPV for climate-adaptive and resilient urban buildings.

  • Passive axial confinement in two-photon lithography with a 3D-printed pupil filter

    by Wei Zhu, Lyudmila V. Goncharova, Eric Johlin

    Two-photon lithography (TPL) enables true three-dimensional nanoscale fabrication, but the writing voxel is inherently anisotropic, with the focal volume substantially more extended along the optical axis than in the transverse plane. This axial voxel elongation remains a central limitation in TPL, restricting layer separation, suspended-feature fidelity, and three-dimensional shape control. We report a passive, 3D-printed Toraldo-style pupil filter that retrofits a high-numerical-aperture (high-NA) bottom-up TPL system to confine the axial voxel, without the need for spatial light modulator (SLM) or digital micromirror device (DMD) beam shaping. A full-vector stratified-media model, matched to the objective–oil–coverslip–resin stack, predicts a reduction of the two-photon axial full width at half maximum (FWHM) from 0.517 to 0.418 µ m. A lateral-offset sensitivity analysis assesses misalignment tolerance. Gold-nanoparticle axial scans measure a reduction from 0.755 to 0.470 µ m, and scanning electron microscopy (SEM) measurements of suspended crosses show a reduced z / x aspect ratio from 2.71 to 1.64. These results demonstrate that a passive printed element can match or exceed the axial confinement performance of active SLM-based designs, establishing passive pupil engineering as a practical and low-cost route to axial confinement in high-NA TPL, with sidelobe-controlled exposure as an exploitable implementation constraint.

  • Open Access

    From Planar to 3D Nanophotonic Lenses: Advancing Design, Fabrication, and Applications

    by Wei Zhu, Lyudmila V. Goncharova, Eric Johlin

    Nanophotonic lenses are transformative optical elements for nanoscale light manipulation and miniaturized optical systems. For a given material platform, the finite thickness of a planar metalens limits the phase and group‐delay response available for simultaneously achieving high numerical aperture, broad bandwidth, and high focusing efficiency. This Review examines the transition from planar to three‐dimensional (3D) nanophotonic lenses for imaging and how added degrees of freedom expand the available optical design space. State‐of‐the‐art fabrication methods, with emphasis on two‐photon lithography, are discussed together with computational design strategies including topology optimization, evolutionary algorithms, and machine learning. Recent demonstrations show that this enlarged design space can support broadband focusing, aberration correction, depth‐of‐field control, and multichannel imaging. Key challenges in scalable fabrication, material development, and large‐scale inverse design are summarized as a roadmap for future 3D nanophotonic lenses.

  • Open Access

    Optimization and experimental validation of neural-network-designed multilayer color imaging splitters

    by Didulani Acharige, Eric Johlin

    Inverse design approaches based on deep learning have recently shown strong potential in accelerating the development of nanophotonic devices. In this work, we investigate the capability of a tandem neural network combined with a genetic algorithm (GA) to design multilayer nanophotonic color splitter structures with improved optical performance. The objective of this study is to explore how far extrapolative designs can be generated when increasing the structural complexity while starting with a relatively small training dataset. The proposed framework was first implemented to generate two-layer color splitter structures capable of directing red, green and blue wavelengths to their corresponding pixel regions in a CMOS image sensor. The generated designs were evaluated using two figures of merit, sensitivity and selectivity. For the two-layer structures the combined GA tandem network approach demonstrated the extrapolative design capability. The framework was then extended to generate three-layer color splitter structures to further examine the impact of increased structural complexity. While the three-layer network successfully generated interpolative structures, it was not able to consistently exceed the performance of the training dataset due to the increased complexity of the design space and limitations in forward model prediction outside the training region. To validate the practical feasibility of the proposed approach, selected single-layer and two-layer structures were fabricated using two-photon lithography and experimentally characterized. The measured optical responses show good qualitative agreement with the simulated results and confirm the predicted RGB focusing behavior. These results demonstrate the capability of the proposed framework to generate fabricable nanophotonic color splitter designs and provide insights into the limitations and opportunities of deep learning based inverse design for increasingly complex multilayer nanophotonic color splitter structures.

  • Open Access

    Control of temporal and spatial proximity effects in two-photon lithography

    by Leila Mehrvar, Wei Zhu, Zekun Wang, Darian Modasi, Eric Johlin


  • Inverse design of polymer-based polarization-insensitive wavelength demultiplexers

    by Leila Mehrvar, Eric Johlin

    The unpredictable polarization of light in network fibers necessitates polarization-independent wavelength demultiplexing for reliable optical communications. This work combines polymer refractive index tunability with topology optimization-based inverse design to develop high-performance two- and four-channel polarization-insensitive wavelength demultiplexers (PIWDMs) for O-band and C-band operation. Optimization studies reveal that a polymer refractive index of 1.7 enables strong mode confinement and minimizes scattering loss, making it ideal for polymer-based PIWDMs. The best-performing two-channel PIWDM achieves an insertion loss (IL) below 1 dB, crosstalk (CT) under −17dB, and polarization-dependent loss (PDL) below 0.32 dB. Fabrication tolerance analysis confirms device robustness within a −10 to +20nm error range. Using optimized structures across different footprints, the four-channel PIWDM achieves an IL between 0.87 and 1.48 dB, a CT from −17.28 to −23.66dB, and a PDL below 0.61 dB. These PIWDMs offer an efficient, easily manufacturable solution for integrated photonic systems.


  • Open Access

    Generative tandem neural network for optimization of nanophotonic color splitters

    by Didulani Acharige, Eric Johlin

    Tandem neural networks have seen success in the inverse design of nanophotonic structures. However, unlike other generative inverse design approaches, these networks typically suffer from a significant limitation as they are single input single output networks with zero diversity. To address this limitation we propose a novel single input, multiple output tandem network specifically for the inverse design of color splitter nanophotonic structures. The color splitters can separate and redirect different colors of light into spatially separated pixels, thereby replacing the color filters used in digital cameras to mitigate absorptive losses. We additionally combine iterative transfer learning approaches to allow training on a small dataset of higher quality samples created through topology optimization, with the training based on a labeled dataset of just 128 labelled samples. The forward network is shown to work well in both interpolation and extrapolation, while a deficiency in the performance of the inverse network in extrapolation can be overcome by use of an additional genetic algorithm optimization. Overall, the tandem network combined with genetic optimization allows significant improvement in the performance of the nanophotonic structures, even compared to traditional gradient-based topology optimization. This technique promises more effective and resource-efficient approach at general optimization, marking a significant advance in the algorithmic design of nanophotonic devices.


  • Open Access

    Hybrid deep learning for design of nanophotonic quantum emitter lenses

    by Didulani Acharige, Eric Johlin

    Inverse design of nanophotonic structures has allowed unprecedented control over light. These design processes however are accompanied with challenges, such as their high sensitivity to initial conditions, computational expense, and complexity in integrating multiple design constraints. Machine learning approaches, however, show complementary strengths, allowing huge sample sets to be generated nearly instantaneously, and with transfer learning, allowing modifications in design parameters to be integrated with limited retraining. Herein we investigate a hybrid deep learning approach, leveraging the accuracy and performance of adjoint-based topology optimization to produce a high-quality training set for a convolutional generative network. We specifically explore this in the context of 3D nanophotonic lenses, used for focusing light between plane-waves and single-point, single-wavelength sources such as quantum emitters. We demonstrate that this combined approach allows higher performance than adjoint optimization alone when additional design constraints are applied; can generate large datasets (which further allows faster iterative training to be performed); and can utilize transfer learning to be retrained on new design parameters with very few new training samples. This process can be used for general nanophotonic design, and is particularly beneficial when a range of design parameters and constraints would need to be applied.


  • Open Access

    Design of multi-objective optimized dynamic photovoltaic shades and thin films

    by Seyedsoroush Sadatifar, Elyas Hannoufa, Eric Johlin