KMKarsten Michael

Karsten Michael

*This is an algorithmically generated author record based on publicly available information.

Karsten Michael has a total of 141 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CCUS hub opportunities in Western Australia

    by Karsten Michael, Matt Loughrey, Eric Williams, Regina Sander, Ian Havercroft, Allison Hortle, Chris Consoli, Errol Pinto, Nabeela Raji, Alex Zapantis

    Western Australia provides ideal conditions for establishing carbon capture, utilization and storage (CCUS) hubs due to the co-location of abundant, highly suitable geological storage resources in saline aquifers and depleted fields with clusters of industrial emissions sources. These industrial emitters include sources with high CO 2 concentrations from gas processing, ammonia and fertilizer production that form a relatively low-cost opportunity for the initial stages of a CCUS hub. The Pilbara CCUS hub concept modelled in this study covers three stages to build economies of scale up to 40 Mtpa CO 2 : (1) 4.3 Mtpa CO 2 from higher CO 2 concentration emissions sources, including reservoir CO 2 separated from natural gas processing and high-CO 2 streams from ammonia/fertilizer production; (2) 18.6 Mtpa CO 2 from lower CO 2 concentration emissions sources that require post-combustion CO 2 capture and new industries including low-emissions hydrogen; (3) 14.2 Mtpa CO 2 from domestic and Asia–Pacific countries. The introduction of low-emissions hydrogen production in the second stage demonstrates how low-emissions hydrogen and its derivative can lay the foundation for future green hydrogen/ammonia production and low-carbon steel. Excess storage capacity provides a new business opportunity to import CO 2 from other parts of Australia and from the broader Asia–Pacific region. However, the large costs for post-combustion capture and shipping infrastructure will require a much higher carbon price, tax incentives or government subsidies than currently available, before the incorporation of these emissions sources would become economically feasible.

  • Concurrent 20. Presentation for: Suitability of depleted gas fields for underground hydrogen storage in Australia

    by Karsten Michael

    Presented on Wednesday 18 May: Session 20 If there is a significant adoption of hydrogen in Australia as an energy carrier, it will be necessary to have storage options to buffer the fluctuations in supply and demand, both for domestic use and for export. For large-scale storage in a single location, underground hydrogen storage (UHS) is the preferred option for reasons of both cost and safety. The search for suitable sites for UHS will depend on the proximity to potential hydrogen generation, ports, and processing infrastructure, as well as CO2 storage options for blue hydrogen. Although UHS in salt caverns is an established technology, most of the suitable salt deposits in Australia (in the Canning Basin in WA, the Adavale Basin in Qld, and the Amadeus Basin in the NT) are not always well-located for production and transport. Depleted gas fields have been used previously for storage of hydrogen-rich gas mixtures as well as natural gas storage and appear to be the most promising and widely available UHS option in Australia. There appears to be sufficient storage capacity in depleted gas fields in most of the geographic areas with hydrogen production potential. However, there are still technical challenges to be addressed, such as the extent of possible contamination of the stored hydrogen with residual hydrocarbons, and the possible effects of geochemical reactions and microbial processes. To access the presentation click the link on the right. To read the full paper click here

  • Suitability of depleted gas fields for underground hydrogen storage in Australia

    by Karsten Michael, Jonathan Ennis-King, Julian Strand, Regina Sander, Chris Green

    If there is a significant adoption of hydrogen in Australia as an energy carrier, it will be necessary to have storage options to buffer the fluctuations in supply and demand, both for domestic use and for export. For large-scale storage in a single location, underground hydrogen storage (UHS) is the preferred option for reasons of both cost and safety. The search for suitable sites for UHS will depend on the proximity to potential hydrogen generation, ports, and processing infrastructure, as well as CO2 storage options for blue hydrogen. Although UHS in salt caverns is an established technology, most of the suitable salt deposits in Australia (in the Canning Basin in WA, the Adavale Basin in Qld, and the Amadeus Basin in the NT) are not always well-located for production and transport. Depleted gas fields have been used previously for storage of hydrogen-rich gas mixtures as well as natural gas storage and appear to be the most promising and widely available UHS option in Australia. There appears to be sufficient storage capacity in depleted gas fields in most of the geographic areas with hydrogen production potential. However, there are still technical challenges to be addressed, such as the extent of possible contamination of the stored hydrogen with residual hydrocarbons, and the possible effects of geochemical reactions and microbial processes.


  • The CSIRO In-Situ Laboratory: a field laboratory for derisking underground gas storage

    by Karsten Michael, Ludovic Ricard, Linda Stalker, Allison Hortle

    The industry in western Australia has committed to addressing their carbon emissions in response to the governments aspiration of net zero greenhouse gas emissions by 2050. Natural gas will play an important role in the transition to a fully renewable energy market but will require the geological storage of carbon dioxide to limit emissions and enable the production of blue hydrogen. Underground storage of energy in general (e.g. natural gas, hydrogen, compressed air) will be needed increasingly for providing options for temporary storage of energy from renewable resources and for energy export. Storage operations would need to provide adequate monitoring systems in compliance with yet to be defined regulations and to assure the public that potential leakage or induced seismicity could be confidently detected, managed and remediated. The In-Situ Laboratory in the southwest of western Australia was established in 2019 as a research field site to support low emissions technologies development and provides a unique field site for fluid injection experiments in a fault zone and testing of monitoring technologies between 400 m depth and the ground surface. The site currently consists of three wells instrumented with fibre optics, pressure, temperature and electric resistivity sensors as well as downhole geophones. A controlled release of CO2 and various water injection tests have demonstrated the ability to detect pressure and temperature effects associated with fluid injection. Future experiments planned at the site will help in improving the sensitivity of monitoring technologies and could contribute to defining adequate monitoring requirements for carbon dioxide, hydrogen and other energy storage operations.


  • A controlled CO2 release experiment in a fault zone at the In-Situ Laboratory in Western Australia

    by Karsten Michael, Arsham Avijegon, Ludovic Ricard, Matt Myers, Konstantin Tertyshnikov, Roman Pevzner, Julian Strand, Allison Hortle, Linda Stalker, Marina Pervukhina, et al.


  • The CSIRO In-Situ Laboratory in South Western Australia: a field laboratory for de-risking carbon storage

    by Karsten Michael, Ludovic Ricard, Linda Stalker, Allison Hortle, Arsham Avijegon

    The oil and gas industry in Western Australia will need to address their carbon emissions in response to the state government’s aspiration of net zero greenhouse gas emissions by 2050. The geological storage of carbon dioxide is a proven technology and an option for reducing emissions. Storage operations would need to provide adequate monitoring systems in compliance with yet to be defined regulations and to assure the public that potential leakage could be confidently detected, managed and remediated. The In-Situ Laboratory in the south-west of Western Australia was established as a research field site to support low emissions technology development and provides a unique field site for controlled CO2 release experiments in a fault zone and testing of monitoring technologies between 400 m depth and the ground surface. A first test injection of 38 tonnes of food-grade gaseous CO2 in 2019 demonstrated the ability to detect less than 10 tonnes of CO2 with fibre optic sensing and borehole seismic testing. Results from the previous test and future experiments will help to improve the sensitivity of monitoring technologies and could contribute to defining adequate monitoring requirements for carbon storage regulations.

  • In-Situ Laboratory for CO2 controlled-release experiments and monitoring in a fault zone in Western Australia

    by Karsten Michael, Arsham Avijegon, Ludovic Ricard, Matt Myers, Konstantin Tertyshnikov, Roman Pevzner, Julian Strand, Barry Freifeld, Mark Woitt, Marina Pervukhina, et al.

    The In-Situ Laboratory Project (In-situ Lab) entails a configuration of wells at approximately 400 m depth for monitoring the controlled release of CO2 in a fault zone at the South West Hub CCS Flagship project in Western Australia. The project aims to evaluate the ability to monitor and detect unwanted leakage of CO2 from a storage complex. The In-Situ Lab consists of three instrumented wells up to 400 m deep: 1) Harvey-2 – primarily for CO2 injection, 2) a fiberglass geophysical monitoring well with behind-casing instrumentation, and 3) a shallow groundwater well for fluid sampling. A controlled- release test involving the injection of 38 tonnes of CO2 between 336-342 m depth was conducted successfully in February 2019. Monitoring during the CO2 controlled-release test included: a) continuous downhole pressure and temperature recording in the injection well, b) recording of pressure and temperature at the wellhead and at various points in the injection system, c) regular distributed temperature measurements, d) multiple vertical seismic profiling surveys using the behind-casing distributed acoustic sensor fiber-optic cable and geophones, e) electric resistivity imaging, f) groundwater sampling, g) comprehensive soil flux and atmospheric monitoring surveys, h) collection of gas samples from the surface injection facilities, i) recording of passive seismic data close to the injection well and in the wider area around the well lease, j) downhole video camera surveys, and k) pulsed neutron and induction logging. The In-Situ Lab has the potential to form an enduring research facility at the South West Hub to enable further research of the characterisation of CO2 migration in fault zones and the shallow groundwater environment.


  • Time lapse in-hole electrical resistivity surveying during a shallow release of CO2 gas: Harvey, Western Australia

    by Brett Harris, Alex Costall, Hoang Nguyen, Karsten Michael, Ludovic Ricard, Barry Freifeld, Arsham Avijegon, Andrew Pethick

    An in-hole electrode array was installed and cemented behind a fibreglass casing in a vertical monitoring well as part of an in-situ laboratory test for CO2 migration in a shallow fault zone in Harvey, Western Australia. The array consisted of 32 electrodes spaced at 3 m intervals, located between 277 m and 370 m below ground level. The intention of the experiments was to assess the value of permanent in-hole electrical resistivity systems, during a shallow-release of CO2. The distance between the monitoring and injection wells was close to 7 m. Food grade CO2 gas was injected through a perforated interval located between 336 m and 342 m below ground level. In the order of 100,000 time-lapse dipole-dipole electrode quadrupole measurements were acquired during the experiment. There was a clear change in measurements at the depth of the injection interval during the release of CO2 gas. Results are being compared with seismic, pressure and temperature data from the monitoring and injections wells from periods before, during and after injection.


  • Open Access

    Well-based Monitoring Schemes for the South West Hub Project, Western Australia

    by L. Ricard, K. Michael, S. Whittaker, B. Harris, A. Hortle, L. Stalker, B. Freifeld