Tao Wu
Research Subjects
Tao Wu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Lijun Yang
4 shared publications- Xiaoze Du
Key Laboratory of Power Station Energy Transfer Conversion and System, North China Electric Power University, Ministry of Education, Beijing 102206, China
4 shared publications Zhihua Ge
4 shared publications- Huimin Wei
Key Laboratory of Condition Monitoring and Control for Power Plant Equipment, Ministry of Education, North China Electric Power University, Beijing 102206, China
2 shared publications - Lizhi Wang
Yangzhou Collaborative Innovation Research Institute Co., Ltd., Yangzhou 225006, China
2 shared publications - Chao Yin
Yangzhou Collaborative Innovation Research Institute Co., Ltd., Yangzhou 225006, China
1 shared publication
Latest Publications
- Open Access
- 2 July 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1366
Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal
The microchannel heat sink has been recognized as an excellent solution in high-density heat flux devices for its high efficiency in heat removal with limited spaces; however, the most effective structure of microchannels for heat dissipation is still unknown. In this study, the fluid flow and heat transfer in high-temperature wavy microchannels with various shaped fins, including the bare wavy channel, and the wavy channel with circular, square, and diamond-shaped fins, are numerically investigated. The liquid metal-cooled characteristics of the proposed microchannels are compared with that of the smooth straight channel, with respect to the pressure drop, average Nusselt number, and overall performance factor. The results indicate that the wavy structure and fin shape have a significant effect on the heat sink performance. Heat transfer augmentation is observed in the wavy channels, especially coupled with different shaped fins; however, a large penalty of pressure drops is also found in these channels. The diamond-shaped fins yield the best heat transfer augmentation but the worst pumping performance, followed by the square-, and circular-shaped fins. When the Re number increases from 117 to 410, the Nu number increases by 61.7% for the diamond fins, while the ∆p increases as much as 7.5 times.
- 2 July 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1366
Open AccessNumerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal
The microchannel heat sink has been recognized as an excellent solution in high-density heat flux devices for its high efficiency in heat removal with limited spaces; however, the most effective structure of microchannels for heat dissipation is still unknown. In this study, the fluid flow and heat transfer in high-temperature wavy microchannels with various shaped fins, including the bare wavy channel, and the wavy channel with circular, square, and diamond-shaped fins, are numerically investigated. The liquid metal-cooled characteristics of the proposed microchannels are compared with that of the smooth straight channel, with respect to the pressure drop, average Nusselt number, and overall performance factor. The results indicate that the wavy structure and fin shape have a significant effect on the heat sink performance. Heat transfer augmentation is observed in the wavy channels, especially coupled with different shaped fins; however, a large penalty of pressure drops is also found in these channels. The diamond-shaped fins yield the best heat transfer augmentation but the worst pumping performance, followed by the square-, and circular-shaped fins. When the Re number increases from 117 to 410, the Nu number increases by 61.7% for the diamond fins, while the ∆p increases as much as 7.5 times.
- Open Access
- 8 January 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (1) , 95
Flow and Heat Transfer Performances of Liquid Metal Based Microchannel Heat Sinks under High Temperature Conditions
Developments in applications such as rocket nozzles, miniature nuclear reactors and solar thermal generation pose high-density heat dissipation challenges. In these applications, a large amount heat must be removed in a limited space under high temperature. In order to handle this kind of cooling problem, this paper proposes liquid metal-based microchannel heat sinks. Using a numerical method, the flow and heat transfer performances of liquid metal-based heat sinks with different working fluid types, diverse microchannel cross-section shapes and various inlet velocities were studied. By solving the 3-D steady and conjugate heat transfer model, we found that among all the investigated cases, lithium and circle were the most appropriate choices for the working fluid and microchannel cross-section shape, respectively. Moreover, inlet velocity had a great influence on the flow and heat transfer performances. From 1 m/s to 9 m/s, the pressure drop increased as much as 65 times, and the heat transfer coefficient was enhanced by about 74.35%.
- 8 January 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (1) , 95
Open AccessFlow and Heat Transfer Performances of Liquid Metal Based Microchannel Heat Sinks under High Temperature Conditions
Developments in applications such as rocket nozzles, miniature nuclear reactors and solar thermal generation pose high-density heat dissipation challenges. In these applications, a large amount heat must be removed in a limited space under high temperature. In order to handle this kind of cooling problem, this paper proposes liquid metal-based microchannel heat sinks. Using a numerical method, the flow and heat transfer performances of liquid metal-based heat sinks with different working fluid types, diverse microchannel cross-section shapes and various inlet velocities were studied. By solving the 3-D steady and conjugate heat transfer model, we found that among all the investigated cases, lithium and circle were the most appropriate choices for the working fluid and microchannel cross-section shape, respectively. Moreover, inlet velocity had a great influence on the flow and heat transfer performances. From 1 m/s to 9 m/s, the pressure drop increased as much as 65 times, and the heat transfer coefficient was enhanced by about 74.35%.
- Open Access
Optimization for Circulating Cooling Water Distribution of Indirect Dry Cooling System in a Thermal Power Plant under Crosswind Condition with Evolution Strategies Algorithm
Crosswind has an adverse impact on the performance of an indirect dry cooling system. In order to mitigate the adverse influence, this study redistributed the circulating cooling water among air-cooled heat exchanger sectors so that the performance of the indirect dry cooling system could be improved. An evolution strategies algorithm combined with numerical effectiveness-based heat exchanger model was established to minimize the operation costs of the whole system. Based on a 660 MW practical power plant, optimal circulating cooling water operation strategies under varied crosswind speeds and ambient temperatures were calculated to show its application. According to the calculated results, the performance of the indirect dry cooling system could be enhanced by optimizing circulating cooling water distribution under any crosswind speed, especially under high ambient wind speeds. There is a slight promotion of the coal savings with a rise in ambient temperature: improvements of about 5%. The standard coal consumption rate could save as much as 2.50 g/kWh under crosswind speed of 10 m s−1 and ambient temperature of 32 °C, compared to the 0.1 g/kWh under crosswind speed of 2 m s−1 and ambient temperature of 32 °C.
Open AccessOptimization for Circulating Cooling Water Distribution of Indirect Dry Cooling System in a Thermal Power Plant under Crosswind Condition with Evolution Strategies Algorithm
Crosswind has an adverse impact on the performance of an indirect dry cooling system. In order to mitigate the adverse influence, this study redistributed the circulating cooling water among air-cooled heat exchanger sectors so that the performance of the indirect dry cooling system could be improved. An evolution strategies algorithm combined with numerical effectiveness-based heat exchanger model was established to minimize the operation costs of the whole system. Based on a 660 MW practical power plant, optimal circulating cooling water operation strategies under varied crosswind speeds and ambient temperatures were calculated to show its application. According to the calculated results, the performance of the indirect dry cooling system could be enhanced by optimizing circulating cooling water distribution under any crosswind speed, especially under high ambient wind speeds. There is a slight promotion of the coal savings with a rise in ambient temperature: improvements of about 5%. The standard coal consumption rate could save as much as 2.50 g/kWh under crosswind speed of 10 m s−1 and ambient temperature of 32 °C, compared to the 0.1 g/kWh under crosswind speed of 2 m s−1 and ambient temperature of 32 °C.
- 1 January 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 128, 248-269
Flow deflectors to release the negative defect of natural wind on large scale dry cooling tower
- 1 January 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 128, 248-269
Flow deflectors to release the negative defect of natural wind on large scale dry cooling tower