Masoud Mohammadian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Masoud Mohammadian has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Ric Jentzsch
University of Canberra, Australia
8 shared publications- Bala M. Balachandran
University of Canberra
4 shared publications - Ali Foroutannia
Faculty of Science and Technology, University of Canberra, Canberra, ACT 2617, Australia
3 shared publications - Farshad Shakeriaski
Faculty of Science and Technology, University of Canberra, Canberra, ACT 2617, Australia
3 shared publications - Abu Saleh
North South University School of Business Dhaka and Canberra Business School, University of Canberra, Canberra, Australia
2 shared publications - Abu Saleh Shah Muhammad Barkat Ullah
University of Canberra
2 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (18) , 9205
A PRISMA-Derived Deterministic Scoring Framework for Intrusion Detection Dataset Evaluation
Dataset selection is one of the most consequential methodological decisions in cybersecurity intrusion detection research. However, it is routinely made based on citation frequency, historical convention, and availability rather than principled evaluation. This allows benchmarks with well-documented limitations to persist, obscuring whether reported performance gains reflect genuine advances or artefacts of data construction. This study addresses that gap by introducing a deterministic, property-based scoring framework. The framework is grounded in a Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA)-guided systematic literature review of 112 peer-reviewed studies published between 1998 and 2024, identified through scholarly database searches conducted through June 2026. It synthesises recurring dataset characteristics into Essential and General property sets and operationalises them into six auditable evaluation categories. Applied to 27 representative datasets, the framework exposes systematic trade-offs that aggregate rankings can miss. It reveals high provenance fidelity and broad attack coverage are structurally compensatory. It also shows that legacy benchmarks occupy a different suitability tier than their citation dominance implies, and that evaluation readiness, not documentation, has the most room for improvement across the current corpus. The result is a reproducible, model-agnostic infrastructure that converts dataset selection from an implicit habit into an explicit, evidence-driven methodological decision. This establishes dataset evaluation as a step deserving the same rigor as algorithm design and experimental protocol specification.
- 16 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (18) , 9205
Open AccessA PRISMA-Derived Deterministic Scoring Framework for Intrusion Detection Dataset Evaluation
Dataset selection is one of the most consequential methodological decisions in cybersecurity intrusion detection research. However, it is routinely made based on citation frequency, historical convention, and availability rather than principled evaluation. This allows benchmarks with well-documented limitations to persist, obscuring whether reported performance gains reflect genuine advances or artefacts of data construction. This study addresses that gap by introducing a deterministic, property-based scoring framework. The framework is grounded in a Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA)-guided systematic literature review of 112 peer-reviewed studies published between 1998 and 2024, identified through scholarly database searches conducted through June 2026. It synthesises recurring dataset characteristics into Essential and General property sets and operationalises them into six auditable evaluation categories. Applied to 27 representative datasets, the framework exposes systematic trade-offs that aggregate rankings can miss. It reveals high provenance fidelity and broad attack coverage are structurally compensatory. It also shows that legacy benchmarks occupy a different suitability tier than their citation dominance implies, and that evaluation readiness, not documentation, has the most room for improvement across the current corpus. The result is a reproducible, model-agnostic infrastructure that converts dataset selection from an implicit habit into an explicit, evidence-driven methodological decision. This establishes dataset evaluation as a step deserving the same rigor as algorithm design and experimental protocol specification.
- Open Access
Adaptive Control of Lower-Limb Assistive Exoskeleton for Rehabilitation Using Deep Reinforcement Learning
Lower-limb rehabilitation exoskeletons have the potential to improve gait recovery after stroke by providing intensive and repetitive training. However, conventional control strategies often rely on fixed control parameters and exhibit limited adaptability to patient-specific characteristics, sensor noise, and dynamic uncertainties. This paper proposes an adaptive control framework that combines deep reinforcement learning (RL) with model-based impedance control for personalised lower-limb exoskeleton assistance. Patient-specific biological parameters are incorporated into the simulation environment and reward formulation to improve adaptability and robustness. Three state-of-the-art deep RL algorithms, Deep Deterministic Policy Gradient (DDPG), Twin Delayed Deep Deterministic Policy Gradient (TD3), and Soft Actor-Critic (SAC), are evaluated in a continuous control environment under varying signal-to-noise ratio (SNR) conditions ranging from 5 dB to noise-free conditions. Results demonstrate that TD3 achieves the most stable learning performance, obtaining a mean reward of −354.24 under noise-free conditions, while DDPG provides the highest joint-angle tracking accuracy with an RMSE of 0.0369 rad. SAC exhibits superior robustness in noisy environments, achieving the highest learning ratio of 0.51 at 5 dB SNR. Furthermore, the proposed personalised framework reduces tracking errors by up to 27% compared with non-personalised baseline approaches. The findings indicate that integrating patient-specific information with RL-based adaptive control can significantly enhance robustness, tracking performance, and personalisation in exoskeleton-assisted gait rehabilitation, providing a promising direction for future intelligent rehabilitation systems.
Open AccessAdaptive Control of Lower-Limb Assistive Exoskeleton for Rehabilitation Using Deep Reinforcement Learning
Lower-limb rehabilitation exoskeletons have the potential to improve gait recovery after stroke by providing intensive and repetitive training. However, conventional control strategies often rely on fixed control parameters and exhibit limited adaptability to patient-specific characteristics, sensor noise, and dynamic uncertainties. This paper proposes an adaptive control framework that combines deep reinforcement learning (RL) with model-based impedance control for personalised lower-limb exoskeleton assistance. Patient-specific biological parameters are incorporated into the simulation environment and reward formulation to improve adaptability and robustness. Three state-of-the-art deep RL algorithms, Deep Deterministic Policy Gradient (DDPG), Twin Delayed Deep Deterministic Policy Gradient (TD3), and Soft Actor-Critic (SAC), are evaluated in a continuous control environment under varying signal-to-noise ratio (SNR) conditions ranging from 5 dB to noise-free conditions. Results demonstrate that TD3 achieves the most stable learning performance, obtaining a mean reward of −354.24 under noise-free conditions, while DDPG provides the highest joint-angle tracking accuracy with an RMSE of 0.0369 rad. SAC exhibits superior robustness in noisy environments, achieving the highest learning ratio of 0.51 at 5 dB SNR. Furthermore, the proposed personalised framework reduces tracking errors by up to 27% compared with non-personalised baseline approaches. The findings indicate that integrating patient-specific information with RL-based adaptive control can significantly enhance robustness, tracking performance, and personalisation in exoskeleton-assisted gait rehabilitation, providing a promising direction for future intelligent rehabilitation systems.
- Open Access
Evaluation of Different Controllers for Sensing-Based Movement Intention Estimation and Safe Tracking in a Simulated LSTM Network-Based Elbow Exoskeleton Robot
Control of elbow exoskeletons using muscular signals, although promising for the rehabilitation of millions of patients, has not yet been widely commercialized due to challenges in real-time intention estimation and management of dynamic uncertainties. From a practical perspective, millions of patients with stroke, spinal cord injury, or neuromuscular disorders annually require active rehabilitation, and elbow exoskeletons with precise and safe motion intention tracking capabilities can restore functional independence, reduce muscle atrophy, and lower treatment costs. In this research, an intelligent control framework was developed for an elbow joint exoskeleton, designed with the aim of precise and safe real-time tracking of the user’s motion intention. The proposed framework consists of two main stages: (a) real-time estimation of desired joint angle (as a proxy for movement intention) from High-Density Surface Electromyography (HD-sEMG) signals using an LSTM network and (b) implementation and comparison of three PID, impedance, and sliding mode controllers. A public EMG dataset including signals from 12 healthy individuals in four isometric tasks (flexion, extension, pronation, supination) and three effort levels (10, 30, 50 percent MVC) is utilized. After comprehensive preprocessing (Butterworth filter, 50 Hz notch, removal of faulty channels) and extraction of 13 time-domain features with 99 percent overlapping windows, the LSTM network with optimal architecture (128 units, Dropout, batch normalization) is trained. The model attained an RMSE of 0.630 Nm, R2 of 0.965, and a Pearson correlation of 0.985 for the full dataset, indicating a 47% improvement in R2 relative to traditional statistical approaches, where EMG is converted to desired angle via joint stiffness. An assessment of 12 motion–effort combinations reveals that the sliding mode controller consistently surpassed the alternatives, achieving the minimal tracking errors (average RMSE = 0.21 Nm, R2 ≈ 0.96) and showing superior resilience across all tasks and effort levels. The impedance controller demonstrates superior performance in flexion/extension (average RMSE ≈ 0.22 Nm, R2 > 0.94) but experiences moderate deterioration in pronation/supination under increased loads, while the classical PID controller shows significant errors (RMSE reaching 17.24 Nm, negative R2 in multiple scenarios) and so it is inappropriate for direct myoelectric control. The proposed LSTM–sliding mode hybrid architecture shows exceptional accuracy, robustness, and transparency in real-time intention monitoring, demonstrating promising performance in offline simulation, with potential for real-time clinical applications pending hardware validation for advanced upper-limb exoskeletons in neurorehabilitation and assistive applications.
Open AccessEvaluation of Different Controllers for Sensing-Based Movement Intention Estimation and Safe Tracking in a Simulated LSTM Network-Based Elbow Exoskeleton Robot
Control of elbow exoskeletons using muscular signals, although promising for the rehabilitation of millions of patients, has not yet been widely commercialized due to challenges in real-time intention estimation and management of dynamic uncertainties. From a practical perspective, millions of patients with stroke, spinal cord injury, or neuromuscular disorders annually require active rehabilitation, and elbow exoskeletons with precise and safe motion intention tracking capabilities can restore functional independence, reduce muscle atrophy, and lower treatment costs. In this research, an intelligent control framework was developed for an elbow joint exoskeleton, designed with the aim of precise and safe real-time tracking of the user’s motion intention. The proposed framework consists of two main stages: (a) real-time estimation of desired joint angle (as a proxy for movement intention) from High-Density Surface Electromyography (HD-sEMG) signals using an LSTM network and (b) implementation and comparison of three PID, impedance, and sliding mode controllers. A public EMG dataset including signals from 12 healthy individuals in four isometric tasks (flexion, extension, pronation, supination) and three effort levels (10, 30, 50 percent MVC) is utilized. After comprehensive preprocessing (Butterworth filter, 50 Hz notch, removal of faulty channels) and extraction of 13 time-domain features with 99 percent overlapping windows, the LSTM network with optimal architecture (128 units, Dropout, batch normalization) is trained. The model attained an RMSE of 0.630 Nm, R2 of 0.965, and a Pearson correlation of 0.985 for the full dataset, indicating a 47% improvement in R2 relative to traditional statistical approaches, where EMG is converted to desired angle via joint stiffness. An assessment of 12 motion–effort combinations reveals that the sliding mode controller consistently surpassed the alternatives, achieving the minimal tracking errors (average RMSE = 0.21 Nm, R2 ≈ 0.96) and showing superior resilience across all tasks and effort levels. The impedance controller demonstrates superior performance in flexion/extension (average RMSE ≈ 0.22 Nm, R2 > 0.94) but experiences moderate deterioration in pronation/supination under increased loads, while the classical PID controller shows significant errors (RMSE reaching 17.24 Nm, negative R2 in multiple scenarios) and so it is inappropriate for direct myoelectric control. The proposed LSTM–sliding mode hybrid architecture shows exceptional accuracy, robustness, and transparency in real-time intention monitoring, demonstrating promising performance in offline simulation, with potential for real-time clinical applications pending hardware validation for advanced upper-limb exoskeletons in neurorehabilitation and assistive applications.
- Open Access
- 18 December 2025
- Published by MDPI AG in Journal of Cybersecurity and Privacy
- Vol. 5 (4) , 113
Exploring Determinants of Information Security Systems Adoption in Saudi Arabian SMEs: An Integrated Multitheoretical Model
High cybersecurity risks and attacks cause information theft, unauthorized access to data and information, reputational damage, and financial loss in small and medium enterprises (SMEs). This creates a need to adopt information security systems of SMEs through innovation and compliance with information security policies. This study seeks to develop an integrated research model assessing the adoption of InfoSec systems in SMEs based on three existing theories, namely the technology acceptance model (TAM), theory of reasoned action (TRA), and unified theory of acceptance and use of technology (UTAUT). A thorough review of literature identified prior experience, enjoyment of new InfoSec technology, top management support, IT infrastructure, security training, legal-governmental regulations, and attitude as potential determinants of adoption of InfoSec systems. A self-developed and self-administered questionnaire was distributed to 418 employees, mid-level managers, and top-level managers working in SMEs operating in Riyadh, Saudi Arabia. The study found that prior experience, top management support, IT infrastructure, security training, and legal-governmental regulations have a positive impact on attitude toward InfoSec systems, which in turn positively influences the adoption of InfoSec systems. Gender, education, and occupation significantly moderated the impact of some determinants on attitude and, consequently, adoption of InfoSec systems. Such an integrated framework offers actionable insights and recommendations, including enhancing information security awareness and compliance with information security policies, as well as increasing profitability within SMEs. The study findings make considerable theoretical contributions to the development of knowledge and deliver practical contributions towards the status of SMEs in Saudi Arabia.
- 18 December 2025
- Published by MDPI AG in Journal of Cybersecurity and Privacy
- Vol. 5 (4) , 113
Open AccessExploring Determinants of Information Security Systems Adoption in Saudi Arabian SMEs: An Integrated Multitheoretical Model
High cybersecurity risks and attacks cause information theft, unauthorized access to data and information, reputational damage, and financial loss in small and medium enterprises (SMEs). This creates a need to adopt information security systems of SMEs through innovation and compliance with information security policies. This study seeks to develop an integrated research model assessing the adoption of InfoSec systems in SMEs based on three existing theories, namely the technology acceptance model (TAM), theory of reasoned action (TRA), and unified theory of acceptance and use of technology (UTAUT). A thorough review of literature identified prior experience, enjoyment of new InfoSec technology, top management support, IT infrastructure, security training, legal-governmental regulations, and attitude as potential determinants of adoption of InfoSec systems. A self-developed and self-administered questionnaire was distributed to 418 employees, mid-level managers, and top-level managers working in SMEs operating in Riyadh, Saudi Arabia. The study found that prior experience, top management support, IT infrastructure, security training, and legal-governmental regulations have a positive impact on attitude toward InfoSec systems, which in turn positively influences the adoption of InfoSec systems. Gender, education, and occupation significantly moderated the impact of some determinants on attitude and, consequently, adoption of InfoSec systems. Such an integrated framework offers actionable insights and recommendations, including enhancing information security awareness and compliance with information security policies, as well as increasing profitability within SMEs. The study findings make considerable theoretical contributions to the development of knowledge and deliver practical contributions towards the status of SMEs in Saudi Arabia.
- 17 October 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 195
A comprehensive survey of lower limb assistive exoskeleton robots: Models, dynamics, mechanics, and control
- 17 October 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 195
A comprehensive survey of lower limb assistive exoskeleton robots: Models, dynamics, mechanics, and control
- Open Access
- 11 August 2025
- Published by JMIR Publications Inc. in JMIR Diabetes
- Vol. 10, e65328
Development of a Smartphone App for Women Living With Gestational Diabetes Mellitus: Qualitative Study
Background: Gestational diabetes mellitus (GDM), a type of blood glucose intolerance or hyperglycemia that occurs during pregnancy, is a common condition increasing in prevalence both globally and in Australia. Mobile health apps have been shown to be a useful resource for women with type 1 diabetes and could successfully contribute to GDM management by facilitating healthy behaviors. Objective: This study aimed to seek the perspectives of health care consumers (HCCs) and health professionals (HPs) regarding the development of a smartphone app for women living with GDM. Methods: A co-design process with 4 distinct phases underpinned the development of SugarMumma. Phase 1 involved a nonsystematic literature search followed by the creation of an app functions wish list. In phase 2, semistructured interviews with HCCs and HPs were undertaken and then thematically analyzed. In phase 3, a prototype was designed based on social cognitive theory and stakeholder recommendations. Agile project management methodology was used, followed by “user acceptance testing.” During phase 4, a second round of individual interviews was undertaken with HCCs and HPs. The same qualitative methods outlined in phase 2 were used. Results: In phase 2, individual and didactic interviews were undertaken with HCCs (n=2) and HPs (n=6). Two overarching themes encompassing recommendations for app development emerged: (1) functionality and (2) individualized care. SugarMumma was created in phase 3. Phase 4 involved a second round of individual interviews with HCCs (n=1) and HPs (n=5), resulting in the final theme (3) future directions. Conclusions: With increasing numbers of people using smartphones, mobile health apps can help manage chronic conditions such as GDM. SugarMumma was designed following extensive stakeholder input. Good functionality, regular notifications, appealing visual aids, positive feedback, relevant dietary advice, and exporting information to HPs are important features to include.
- 11 August 2025
- Published by JMIR Publications Inc. in JMIR Diabetes
- Vol. 10, e65328
Open AccessDevelopment of a Smartphone App for Women Living With Gestational Diabetes Mellitus: Qualitative Study
Background: Gestational diabetes mellitus (GDM), a type of blood glucose intolerance or hyperglycemia that occurs during pregnancy, is a common condition increasing in prevalence both globally and in Australia. Mobile health apps have been shown to be a useful resource for women with type 1 diabetes and could successfully contribute to GDM management by facilitating healthy behaviors. Objective: This study aimed to seek the perspectives of health care consumers (HCCs) and health professionals (HPs) regarding the development of a smartphone app for women living with GDM. Methods: A co-design process with 4 distinct phases underpinned the development of SugarMumma. Phase 1 involved a nonsystematic literature search followed by the creation of an app functions wish list. In phase 2, semistructured interviews with HCCs and HPs were undertaken and then thematically analyzed. In phase 3, a prototype was designed based on social cognitive theory and stakeholder recommendations. Agile project management methodology was used, followed by “user acceptance testing.” During phase 4, a second round of individual interviews was undertaken with HCCs and HPs. The same qualitative methods outlined in phase 2 were used. Results: In phase 2, individual and didactic interviews were undertaken with HCCs (n=2) and HPs (n=6). Two overarching themes encompassing recommendations for app development emerged: (1) functionality and (2) individualized care. SugarMumma was created in phase 3. Phase 4 involved a second round of individual interviews with HCCs (n=1) and HPs (n=5), resulting in the final theme (3) future directions. Conclusions: With increasing numbers of people using smartphones, mobile health apps can help manage chronic conditions such as GDM. SugarMumma was designed following extensive stakeholder input. Good functionality, regular notifications, appealing visual aids, positive feedback, relevant dietary advice, and exporting information to HPs are important features to include.
- Open Access
Enhancing Upper Limb Exoskeletons Using Sensor-Based Deep Learning Torque Prediction and PID Control
Upper limb assistive exoskeletons help stroke patients by assisting arm movement in impaired individuals. However, effective control of these systems to help stroke survivors is a complex task. In this paper, a novel approach is proposed to enhance the control of upper limb assistive exoskeletons by using torque estimation and prediction in a proportional–integral–derivative (PID) controller loop to more optimally integrate the torque of the exoskeleton robot, which aims to eliminate system uncertainties. First, a model for torque estimation from Electromyography (EMG) signals and a predictive torque model for the upper limb exoskeleton robot for the elbow are trained. The trained data consisted of two-dimensional high-density surface EMG (HD-sEMG) signals to record myoelectric activity from five upper limb muscles (biceps brachii, triceps brachii, anconeus, brachioradialis, and pronator teres) during voluntary isometric contractions for twelve healthy subjects performing four different isometric tasks (supination/pronation and elbow flexion/extension) for one minute each, which were trained on long short-term memory (LSTM), bidirectional LSTM (BLSTM), and gated recurrent units (GRU) deep neural network models. These models estimate and predict torque requirements. Finally, the estimated and predicted torque from the trained network is used online as input to a PID control loop and robot dynamic, which aims to control the robot optimally. The results showed that using the proposed method creates a strong and innovative approach to greater independence and rehabilitation improvement.
Open AccessEnhancing Upper Limb Exoskeletons Using Sensor-Based Deep Learning Torque Prediction and PID Control
Upper limb assistive exoskeletons help stroke patients by assisting arm movement in impaired individuals. However, effective control of these systems to help stroke survivors is a complex task. In this paper, a novel approach is proposed to enhance the control of upper limb assistive exoskeletons by using torque estimation and prediction in a proportional–integral–derivative (PID) controller loop to more optimally integrate the torque of the exoskeleton robot, which aims to eliminate system uncertainties. First, a model for torque estimation from Electromyography (EMG) signals and a predictive torque model for the upper limb exoskeleton robot for the elbow are trained. The trained data consisted of two-dimensional high-density surface EMG (HD-sEMG) signals to record myoelectric activity from five upper limb muscles (biceps brachii, triceps brachii, anconeus, brachioradialis, and pronator teres) during voluntary isometric contractions for twelve healthy subjects performing four different isometric tasks (supination/pronation and elbow flexion/extension) for one minute each, which were trained on long short-term memory (LSTM), bidirectional LSTM (BLSTM), and gated recurrent units (GRU) deep neural network models. These models estimate and predict torque requirements. Finally, the estimated and predicted torque from the trained network is used online as input to a PID control loop and robot dynamic, which aims to control the robot optimally. The results showed that using the proposed method creates a strong and innovative approach to greater independence and rehabilitation improvement.
- Open Access
- 8 September 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (9) , 543
Dynamic Effects Analysis in Fractional Memristor-Based Rulkov Neuron Model
Mathematical models such as Fitzhugh–Nagoma and Hodgkin–Huxley models have been used to understand complex nervous systems. Still, due to their complexity, these models have made it challenging to analyze neural function. The discrete Rulkov model allows the analysis of neural function to facilitate the investigation of neuronal dynamics or others. This paper introduces a fractional memristor Rulkov neuron model and analyzes its dynamic effects, investigating how to improve neuron models by combining discrete memristors and fractional derivatives. These improvements include the more accurate generation of heritable properties compared to full-order models, the treatment of dynamic firing activity at multiple time scales for a single neuron, and the better performance of firing frequency responses in fractional designs compared to integer models. Initially, we combined a Rulkov neuron model with a memristor and evaluated all system parameters using bifurcation diagrams and the 0–1 chaos test. Subsequently, we applied a discrete fractional-order approach to the Rulkov memristor map. We investigated the impact of all parameters and the fractional order on the model and observed that the system exhibited various behaviors, including tonic firing, periodic firing, and chaotic firing. We also found that the more I tend towards the correct order, the more chaotic modes in the range of parameters. Following this, we coupled the proposed model with a similar one and assessed how the fractional order influences synchronization. Our results demonstrated that the fractional order significantly improves synchronization. The results of this research emphasize that the combination of memristor and discrete neurons provides an effective tool for modeling and estimating biophysical effects in neurons and artificial neural networks.
- 8 September 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (9) , 543
Open AccessDynamic Effects Analysis in Fractional Memristor-Based Rulkov Neuron Model
Mathematical models such as Fitzhugh–Nagoma and Hodgkin–Huxley models have been used to understand complex nervous systems. Still, due to their complexity, these models have made it challenging to analyze neural function. The discrete Rulkov model allows the analysis of neural function to facilitate the investigation of neuronal dynamics or others. This paper introduces a fractional memristor Rulkov neuron model and analyzes its dynamic effects, investigating how to improve neuron models by combining discrete memristors and fractional derivatives. These improvements include the more accurate generation of heritable properties compared to full-order models, the treatment of dynamic firing activity at multiple time scales for a single neuron, and the better performance of firing frequency responses in fractional designs compared to integer models. Initially, we combined a Rulkov neuron model with a memristor and evaluated all system parameters using bifurcation diagrams and the 0–1 chaos test. Subsequently, we applied a discrete fractional-order approach to the Rulkov memristor map. We investigated the impact of all parameters and the fractional order on the model and observed that the system exhibited various behaviors, including tonic firing, periodic firing, and chaotic firing. We also found that the more I tend towards the correct order, the more chaotic modes in the range of parameters. Following this, we coupled the proposed model with a similar one and assessed how the fractional order influences synchronization. Our results demonstrated that the fractional order significantly improves synchronization. The results of this research emphasize that the combination of memristor and discrete neurons provides an effective tool for modeling and estimating biophysical effects in neurons and artificial neural networks.
- Open Access
- 12 August 2024
- Published by JMIR Publications Inc. in JMIR Preprints
SugarMumma: The Development of a Smartphone App for Women living with Gestational Diabetes Mellitus (Preprint)
BACKGROUND Gestational Diabetes Mellitus (GDM), a type of blood glucose intolerance or hyperglycemia that occurs during pregnancy, is a common condition increasing in prevalence both globally and in Australia. Mobile health applications have been shown as a useful resource for women with Type 1 diabetes and could successfully contribute to GDM management by facilitating healthy behaviors. OBJECTIVE To seek the perspectives of Health Care Consumers (HCCs) and Health Professionals (HPs) regarding the development of a smartphone application for women living with GDM. METHODS A co-design process with four distinct phases and using an evidence-based approach underpinned the development of the SugarMumma App. Existing evidence, and the results from interviews and focus groups with eight stakeholders created an initial set of recommendations. An app development company designed the prototype with HCCs and HPs undertaking ‘user acceptance testing.’ Analysis of the findings from a second round of interviews was undertaken. RESULTS Data analysis revealed four themes. Functionality, Communication, and Individualised care were recognised as being pivotal if the app was to be informative and useful in addition to supporting the diverse needs of HCCs. Motivation to manage GDM and birth a healthy baby was seen as a motivating factor for SugarMumma’s use by women. CONCLUSIONS With increasing numbers of people using smartphones in their daily lives, mHealth apps can help manage chronic conditions such as GDM. Good functionality, regular notifications, appealing visual aids, positive feedback, relevant dietary advice and exporting information to HPs are important features to include.
- 12 August 2024
- Published by JMIR Publications Inc. in JMIR Preprints
Open AccessSugarMumma: The Development of a Smartphone App for Women living with Gestational Diabetes Mellitus (Preprint)
BACKGROUND Gestational Diabetes Mellitus (GDM), a type of blood glucose intolerance or hyperglycemia that occurs during pregnancy, is a common condition increasing in prevalence both globally and in Australia. Mobile health applications have been shown as a useful resource for women with Type 1 diabetes and could successfully contribute to GDM management by facilitating healthy behaviors. OBJECTIVE To seek the perspectives of Health Care Consumers (HCCs) and Health Professionals (HPs) regarding the development of a smartphone application for women living with GDM. METHODS A co-design process with four distinct phases and using an evidence-based approach underpinned the development of the SugarMumma App. Existing evidence, and the results from interviews and focus groups with eight stakeholders created an initial set of recommendations. An app development company designed the prototype with HCCs and HPs undertaking ‘user acceptance testing.’ Analysis of the findings from a second round of interviews was undertaken. RESULTS Data analysis revealed four themes. Functionality, Communication, and Individualised care were recognised as being pivotal if the app was to be informative and useful in addition to supporting the diverse needs of HCCs. Motivation to manage GDM and birth a healthy baby was seen as a motivating factor for SugarMumma’s use by women. CONCLUSIONS With increasing numbers of people using smartphones in their daily lives, mHealth apps can help manage chronic conditions such as GDM. Good functionality, regular notifications, appealing visual aids, positive feedback, relevant dietary advice and exporting information to HPs are important features to include.