VDVictor B. Demidovich

Victor B. Demidovich

*This is an algorithmically generated author record based on publicly available information.

Victor B. Demidovich has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Digital Simulation of Physical Fields during Induction Hardening of Bulky Products

    by Viktor Demidovich, Vyacheslav Parmenov, Yuriy Perevalov, Fedor Chmilenko

    The article presents an analysis of the mathematical models of physical fields in induction heating systems designed for the heat treatment of large-diameter rolling mill rolls. Digital models have been developed that effectively describe induction heat treatment processes, accounting for the complex interconnection between electromagnetic and thermal fields in cylindrical systems. Models describing the microstructural transformations and thermal stresses arising during the heating and cooling of the rolls have also been developed. The results obtained open the possibility to assess the roll material's microstructure, hardness, grain size, and residual stresses. These models help optimize the equipment design and heat treatment parameters, thereby improving the hardening quality and reducing the energy consumption. The dual-frequency hardening technology for rolling mill rolls is examined as a case study. В статье представлен анализ математических моделей физических полей в индукционных нагревательных системах, предназначенных для термической обработки валков прокатных станов больших диаметров. Разработаны цифровые модели, которые эффективно описывают процессы индукционной термообработки, учитывая сложную взаимосвязь электромагнитных и температурных полей в цилиндрических системах. Также разработаны модели, описывающие структурные превращения и термические напряжения, возникающие при нагреве и охлаждении валков. Полученные результаты позволяют провести оценку структуры, твердости, размеров зерен и остаточных напряжений в материале валков. Эти модели способствуют оптимизации конструкции оборудования и параметров термической обработки, что повышает качество закалки и снижает энергозатраты. В качестве примера рассматривается технология двухчастотной закалки валков прокатного стана.

  • Development of Induction Heating Systems in the Metallurgical Industry Using Digital Twin Technology

    by V. B. Demidovich

    Digitalization of the induction heating systems development in the metallurgical industry goes from numerical simulation of electromagnetic fields to the c

  • Induction Heating Features in Electrical Steel Hot Rolling Mills

    by Виктор Болеславович Демидович

    Induction heaters in steel hot rolling mills can be used most efficiently in combination with gas furnaces. Such approach is economically profitable; it reduces the cost of metal heating with a significant reduction in scaling and decarburization, improves the gas furnace servicing conditions, and reduces carbon emissions. At the same time, induction heaters have proven themselves as effective inertia-free temperature controllers in conventional steel hot rolling lines, ensuring better quality of rolled products and creating prerequisites for the development of new technologies for producing electrical steel in these mills. The three previously formulated tasks of rolled strip heating before the finishing stands, namely, raising the average temperature, heating the edges, and eliminating the temperature difference along the strip length, are solved by using various types of inductors with their being appropriately placed on the mill to ensure maximum quality of rolled products with minimal costs for mill refurbishment. When implementing a set of works on modernizing a rolling mill, it is necessary to use digital twins of induction heaters during their design, control, operation and integration into the overall mill control system. Индукционные нагреватели на станах горячей прокатки стали могут наиболее эффективно использоваться в комбинации с газовыми печами. Такой подход является экономически выгодным, снижающим стоимость нагрева металла при существенном уменьшении окалинообразования и обезуглероживании, улучшении условий обслуживания газовых печей и сокращении углеродных выбросов. В то же время индукционные нагреватели зарекомендовали себя как эффективные безынерционные регуляторы температуры в традиционных линиях горячей прокатки стали, обеспечивающие повышение качества проката и создающие предпосылки для разработки новых технологий получения на этих станах проката электротехнической стали. Сформулированные ранее три задачи подогрева полосы подката перед чистовыми клетями (подъем средней температуры, подогрев кромок, ликвидация температурного перепада по длине полос) решаются использованием различных типов индукторов при соответствующем размещении их на стане для обеспечения максимального качества проката при минимальных затратах на реконструкцию стана. При реализации комплекса работ по модернизации прокатного стана необходимо использование цифровых двойников индукционных нагревателей при их проектировании, управлении, эксплуатации и встраивании в общую систему управления станом.

  • Modeling the Technologies for Melting and Casting Light Alloys in an Electromagnetic Field

    by Виктор Болеславович Демидович, Виктор Николаевич Тимофеев, Mikhail Khatsayuk, Михаил Юрьевич Хацаюк

    Scientific principles of the development of technologies for melting and casting aluminum and titanium-based alloys in an alternating electromagnetic field are considered. In the 21st century, innovative technologies for melting and casting light alloys in an alternating electromagnetic field can hardly be developed and implemented unless being supported with digital technologies, and methodology of digital twins and numerical models combining closely interconnected electromagnetic, thermodynamic, hydrodynamic and mechanical processes. A unique technology for continuously casting small-diameter round ingots into an electromagnetic crystallizer with the crystallizing metal surface directly cooled with water has been developed. By applying the newly developed technology it becomes possible to simultaneously achieve a number of unique effects that alter significantly the quality and properties of the resulting billets (reduction in the amount of undesirable impurities and inclusions in the metal structure, uniform distribution of phases and grains in the metal ingot structure, and uniform distribution of chemical elements and compounds in the metal matrix). The occurrence of a titanium alloy liquid phase inside the cylinder was predicted using a numerical model and confirmed by experimental studies. Owing to a unique combination of the titanium thermophysical properties with the action of an alternating electromagnetic field in an inductor, up to 90% of the total mass of a titanium cylindrical billet can be obtained in the liquid phase. Magnetohydrodynamic effects that come into picture after the start of melting play a special role in achieving this result. Статья посвящена научным основам разработки технологий плавки и литья в переменном электромагнитном поле сплавов на основе алюминия и титана. Инновационные технологии плавки и литья легких сплавов в переменном электромагнитном поле в ХХI в. уже невозможно разработать и реализовать без цифрового сопровождения, методологии цифровых двойников и численных моделей, сочетающих тесно связанные электромагнитные, термодинамические, гидродинамические и механические процессы. Разработана уникальная технология непрерывного литья круглых слитков малого диаметра в электромагнитный кристаллизатор с непосредственным охлаждением водой поверхности кристаллизующегося металла. Технология позволяет одновременно достичь ряд уникальных эффектов, существенно изменяющих качество и свойства получаемых заготовок (снижение количества нежелательных примесей и включений в структуре металла, равномерное распределение фаз и зерен в структуре металлического слитка, равномерное распределение химических элементов и соединений в металлической матрице). Явление образования внутри цилиндра жидкой фазы титановых сплавов было предсказано на численной модели и подтверждено экспериментальными исследованиями. Уникальное сочетание теплофизических свойств титана с воздействием переменного электромагнитного поля в индукторе позволяет получить до 90 % общей массы титановой цилиндрической заготовки в жидкой фазе. Особую роль в достижении этого результата играют магнитогидродинамические (МГД) эффекты после начала расплавления.

  • Numerical simulation and verification of MHD-vortex

    by Maxim Khatsayuk, Viktor Timofeev, Viktor Demidovich

    Purpose: The purpose of this study is research and development of the magnetohydrodynamics (MHD)-vortex technology. Design/methodology/approach: The main instruments of research are mathematical modeling. For mathematical modeling used numerical and analytical both methods. For verification was made small copy of facility with forming of vortex in rotating magnetic field. Findings: The design and manufacture of the industrial unit for melting small metal waste in a gas-fired smelt furnace has been completed. Originality/value: Here shows new algorithm for engineering calculation of arc induction systems with take into account longitudinal edge effect and discrete distribution of current layers. Also shows verification of numerical results. Presented new MHD-technology for forming vortex in electromagnetic field.


  • Electrotechnical Problems during Induction Hardening of Large Products

    by V. B. Demidovich, Yu. Yu. Perevalov

    Modern installations of induction heat treatment of large rolls of rolling mills are considered. The equipment and technology of induction heat treatment o


  • Advanced automated complex using induction and resistance furnaces for precise heating of the titanium billets

    by Victor Demidovich, Yuri Pervalov

    The automated complex is developed for precise heating of cylindrical titanium billets with various length and diameter. The high homogeneity temperature field of the billet is reached during the heating process. Achievement accuracy of the final temperature is $5\div 10\ {}^{\circ}\mathbf{C}$ . Billets of $400\div 750$ mm length and 165-275 mm diameter are exposed to heating. The heating cycle of billet in the inductor and the resistance furnace includes high-speed heating in induction heater and endurance of billet in the resistance furnace. Temperature control of a billet surface is made by means of a pyrometer located over a surface of billet in the middle of the inductor. Billet transportation from the induction heaters store and then into the resistance furnace is made by means of carts in automatic and manual modes.

  • Open Access

    Control of inductors for formation of the required temperature profile in tasks of control and design

    by V B Demidovich, F V Chmilenko, I I Rastvorova

    Here, we introduce current design trends in modern machine building inductor installations on the example of inductor installations for heating before treatment. A particular focus is given to the numerical simulation, whose importance increases due to modern strict requirements for the technological process as well as computational power increase. Nowadays, numerical computations are required not only to calculate electromagnetic and thermal fields for separate devices but also to simulate the whole technology. New trends in computing developments allow using real-time computational model control by inverse solution (inductor parameters calculation according to the given temperature profile).