Rebecca B. Scott
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Rebecca B. Scott has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Patrick Degryse
KU Leuven, Belgium
9 shared publications - Andrew J. Shortland
Cranfield Forensic Institute Cranfield University, Defence Academy of the United Kingdom Shrivenham UK
2 shared publications B. Neyt
Centre for Archaeological Sciences, Geology Division, Department of Earth and Environmental Sciences Katholieke Universiteit Leuven Celestijnenlaan 200E BE‐3001 Leuven Belgium
2 shared publications- Frank Vanhaecke
Atomic & Mass Spectrometry-A&MS Research Group, Department of Chemistry, Ghent University, Campus Sterre, Krijgslaan 281-S12, 9000 Ghent, Belgium
2 shared publications K. Eekelers
2 shared publicationsA. J. Shortland
1 shared publication
Latest Publications
- Open Access
- 27 May 2020
- Published by Taylor & Francis in Journal of Island and Coastal Archaeology
- Vol. 16 (2-4) , 290-316
Island networks: Transformations of inter-community social relationships in the Lesser Antilles at the advent of European colonialism
The Caribbean Sea was a conduit for human mobility and the exchange of goods and ideas during the whole of its pre-colonial history. The period cal. AD 1000-1800, covering the Late Ceramic Age and early colonial era, represents an archaeologically understudied time during which the Lesser Antilles came under increasing influence from the Greater Antilles and coastal South America and participated in the last phase of indigenous resistance to colonial powers. This article summarizes the results of the Island Network project, supported by the Netherlands Organisation for Scientific Research (NWO) in which a multi-disciplinary set of archaeological, archaeometric, geochemical, GIS, and network science methods and techniques have been employed to disentangle this turbulent era in regional and global history. These diverse approaches reveal and then explore multi-layered networks of objects and people and uncover how Lesser Antillean communities were created and transformed through teaching, trade, migration, movement, and exchange of goods and knowledge.
- 27 May 2020
- Published by Taylor & Francis in Journal of Island and Coastal Archaeology
- Vol. 16 (2-4) , 290-316
Open AccessIsland networks: Transformations of inter-community social relationships in the Lesser Antilles at the advent of European colonialism
The Caribbean Sea was a conduit for human mobility and the exchange of goods and ideas during the whole of its pre-colonial history. The period cal. AD 1000-1800, covering the Late Ceramic Age and early colonial era, represents an archaeologically understudied time during which the Lesser Antilles came under increasing influence from the Greater Antilles and coastal South America and participated in the last phase of indigenous resistance to colonial powers. This article summarizes the results of the Island Network project, supported by the Netherlands Organisation for Scientific Research (NWO) in which a multi-disciplinary set of archaeological, archaeometric, geochemical, GIS, and network science methods and techniques have been employed to disentangle this turbulent era in regional and global history. These diverse approaches reveal and then explore multi-layered networks of objects and people and uncover how Lesser Antillean communities were created and transformed through teaching, trade, migration, movement, and exchange of goods and knowledge.
- Open Access
- 1 August 2018
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 20, 722-735
Characterisation of Byzantine and early Islamic primary tank furnace glass
- 1 August 2018
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 20, 722-735
Open AccessCharacterisation of Byzantine and early Islamic primary tank furnace glass
- 22 January 2018
- Published by Wiley in Archaeometry
- Vol. 60 (5) , 966-985
Determining the Provenance of Cayo Pottery from Grenada, Lesser Antilles, Using Portable X‐Ray Fluorescence Spectrometry
Portable XRF was used to analyse the chemical composition of 52 indigenous Cayo ceramics from excavations and from private collections on Grenada, Lesser Antilles. Initially, a comparative baseline of data representing three different islands (Grenada, St Vincent and Trinidad) was created by analysing with pXRF ceramic material that had previously been analysed both chemically and petrographically. The field data, when compared to the laboratory baseline data, indicated that the majority of the ceramics were made with clay local to Grenada. Four samples were potentially made with clay from another, as yet unidentified, source.
- 22 January 2018
- Published by Wiley in Archaeometry
- Vol. 60 (5) , 966-985
Determining the Provenance of Cayo Pottery from Grenada, Lesser Antilles, Using Portable X‐Ray Fluorescence Spectrometry
Portable XRF was used to analyse the chemical composition of 52 indigenous Cayo ceramics from excavations and from private collections on Grenada, Lesser Antilles. Initially, a comparative baseline of data representing three different islands (Grenada, St Vincent and Trinidad) was created by analysing with pXRF ceramic material that had previously been analysed both chemically and petrographically. The field data, when compared to the laboratory baseline data, indicated that the majority of the ceramics were made with clay local to Grenada. Four samples were potentially made with clay from another, as yet unidentified, source.
- 14 February 2017
- Published by Society of Glass Technology in Glass Technology: European Journal of Glass Science and Technology Part A
- Vol. 58 (1) , 8-16
Experimental mixing of natron and plant ash style glass: implications for ancient glass recycling
The practice of re-melting glass was well known, certainly from the Roman period onwards. This can be seen not only in ancient literary evidence but also in the archaeological evidence, collections of broken glass have been found in, for example, Pompeii (79 AD) and the Iulia Felix shipwreck (Third century AD). Elevated levels of certain transition metals in archaeological glasses are interpreted as indications of the mixing and/or recycling of different glasses. Assumptions have been made that all glasses could be recycled, but to what extent are these valid? Why does the evidence for the recycling of glass only occur from the Roman period onwards? From the middle of the First millennium BC to the Ninth century AD, natron glass was the predominant glass type in the Mediterranean and Europe, however, plant ash glass was still in use in some areas. To test the effects on the final product of mixing different composition glass types, experimental glasses were made by mixing varying quantities of replica plant ash glass, replica natron glass, and a modern glass. At low temperatures crystalline material formed in the products containing replica plant ash glass. As the plant ash glass content increased, so too did the amount of crystalline material produced. This is due to a combination of the glass compositions and the firing temperature. It appears that natron type glass can be more easily recycled at lower temperatures, although, if a high enough temperature is used then most glass types can be recycled. Early furnace technology, i.e.the vertical heating chamber furnace, may not have been able to achieve these high temperatures, hence the widespread practice of recycling did not begin until after the invention of glassblowing which required a change in the furnace technology to the use of a horizontal heating chamber furnace.
- 14 February 2017
- Published by Society of Glass Technology in Glass Technology: European Journal of Glass Science and Technology Part A
- Vol. 58 (1) , 8-16
Experimental mixing of natron and plant ash style glass: implications for ancient glass recycling
The practice of re-melting glass was well known, certainly from the Roman period onwards. This can be seen not only in ancient literary evidence but also in the archaeological evidence, collections of broken glass have been found in, for example, Pompeii (79 AD) and the Iulia Felix shipwreck (Third century AD). Elevated levels of certain transition metals in archaeological glasses are interpreted as indications of the mixing and/or recycling of different glasses. Assumptions have been made that all glasses could be recycled, but to what extent are these valid? Why does the evidence for the recycling of glass only occur from the Roman period onwards? From the middle of the First millennium BC to the Ninth century AD, natron glass was the predominant glass type in the Mediterranean and Europe, however, plant ash glass was still in use in some areas. To test the effects on the final product of mixing different composition glass types, experimental glasses were made by mixing varying quantities of replica plant ash glass, replica natron glass, and a modern glass. At low temperatures crystalline material formed in the products containing replica plant ash glass. As the plant ash glass content increased, so too did the amount of crystalline material produced. This is due to a combination of the glass compositions and the firing temperature. It appears that natron type glass can be more easily recycled at lower temperatures, although, if a high enough temperature is used then most glass types can be recycled. Early furnace technology, i.e.the vertical heating chamber furnace, may not have been able to achieve these high temperatures, hence the widespread practice of recycling did not begin until after the invention of glassblowing which required a change in the furnace technology to the use of a horizontal heating chamber furnace.
- Open Access
- 14 January 2016
- Published by SAGE Publications in Applied Spectroscopy
- Vol. 70 (1) , 94-109
Quantitative Chemical Analysis of Archaeological Slag Material Using Handheld X-ray Fluorescence Spectrometry
Handheld X-ray fluorescence spectrometry (XRF) has seen a dramatic increase in use for archaeological projects. The attraction of the technique is its portable and nondestructive nature. In many cases, the archaeological artefacts in question cannot be destructively sampled, or the piece itself cannot be sent to an analytical laboratory. One of the current research interests associated with the Sagalassos project is the study of the Roman iron industry. Previously exported iron slag and ore from the site and the surrounding area was subjected to laboratory chemical analyses. These indicated that different ores were being utilized in the production of iron in different periods. In order to further the project the slag material still in the site depot needed to be analyzed. However, recent legislative changes mean that materials can only be analyzed on-site. Since samples could not be taken and destructive chemical analysis was no longer feasible, a portable, nondestructive technique was required. Handheld XRF can easily provide qualitative data, but these data are only comparable to other handheld XRF qualitative data, from the same device. Quantitative data gathering is possible, but can be more problematic, particularly when the material in question is heterogeneous in nature. A calibration file was created using the manufacturer’s software and “in-house” standards made from the pre-quantified samples of iron slag available in the laboratory. In order to make the calibration as robust as possible, the composition of the standards was analyzed statistically to determine which of these created bias and leverage for specific elements. These standards were then omitted from the calibration for that element. The calibration was tested in the laboratory using samples of iron slag previously analyzed with wet chemistry, and the results indicated that most sample analyses showed 30% error were found in samples which contained very low or very high quantities of the analyzed element, i.e., outside the limits of the calibration. The handheld XRF and the associated calibration file were then used to provide a semi-quantified chemical characterization of the samples in the field depot.
- 14 January 2016
- Published by SAGE Publications in Applied Spectroscopy
- Vol. 70 (1) , 94-109
Open AccessQuantitative Chemical Analysis of Archaeological Slag Material Using Handheld X-ray Fluorescence Spectrometry
Handheld X-ray fluorescence spectrometry (XRF) has seen a dramatic increase in use for archaeological projects. The attraction of the technique is its portable and nondestructive nature. In many cases, the archaeological artefacts in question cannot be destructively sampled, or the piece itself cannot be sent to an analytical laboratory. One of the current research interests associated with the Sagalassos project is the study of the Roman iron industry. Previously exported iron slag and ore from the site and the surrounding area was subjected to laboratory chemical analyses. These indicated that different ores were being utilized in the production of iron in different periods. In order to further the project the slag material still in the site depot needed to be analyzed. However, recent legislative changes mean that materials can only be analyzed on-site. Since samples could not be taken and destructive chemical analysis was no longer feasible, a portable, nondestructive technique was required. Handheld XRF can easily provide qualitative data, but these data are only comparable to other handheld XRF qualitative data, from the same device. Quantitative data gathering is possible, but can be more problematic, particularly when the material in question is heterogeneous in nature. A calibration file was created using the manufacturer’s software and “in-house” standards made from the pre-quantified samples of iron slag available in the laboratory. In order to make the calibration as robust as possible, the composition of the standards was analyzed statistically to determine which of these created bias and leverage for specific elements. These standards were then omitted from the calibration for that element. The calibration was tested in the laboratory using samples of iron slag previously analyzed with wet chemistry, and the results indicated that most sample analyses showed 30% error were found in samples which contained very low or very high quantities of the analyzed element, i.e., outside the limits of the calibration. The handheld XRF and the associated calibration file were then used to provide a semi-quantified chemical characterization of the samples in the field depot.
- Open Access
- 21 December 2015
- Published by Taylor & Francis in STAR: Science & Technology of Archaeological Research
- Vol. 1 (2) , 115-124
Geochemical heterogeneity of sand deposits and its implications for the provenance determination of Roman glass
During the production of natron glass most features of the raw materials are lost and only some bulk geochemical characteristics have potential as provenance indicators. To determine the primary origin of archaeological glass artefacts, suitable sand raw materials have to be accurately characterised. In this respect, information about the possible variation in geochemical properties within a silica source is also vital to account for potential (partial) overlap of different sources. In this study, it is shown that the variation in major and minor elemental composition of beach sand on a local scale is smaller than the variation in Roman natron glass. Therefore, a single sand deposit can be seen as a relatively homogeneous source of silica for glass production. Nd isotopic signatures are identical for all samples analysed. The isotopic composition of Sr however varies considerably due to local variations in the relative proportions of carbonates and silicates (mostly feldspar).
- 21 December 2015
- Published by Taylor & Francis in STAR: Science & Technology of Archaeological Research
- Vol. 1 (2) , 115-124
Open AccessGeochemical heterogeneity of sand deposits and its implications for the provenance determination of Roman glass
During the production of natron glass most features of the raw materials are lost and only some bulk geochemical characteristics have potential as provenance indicators. To determine the primary origin of archaeological glass artefacts, suitable sand raw materials have to be accurately characterised. In this respect, information about the possible variation in geochemical properties within a silica source is also vital to account for potential (partial) overlap of different sources. In this study, it is shown that the variation in major and minor elemental composition of beach sand on a local scale is smaller than the variation in Roman natron glass. Therefore, a single sand deposit can be seen as a relatively homogeneous source of silica for glass production. Nd isotopic signatures are identical for all samples analysed. The isotopic composition of Sr however varies considerably due to local variations in the relative proportions of carbonates and silicates (mostly feldspar).
- Open Access
- 21 December 2015
- Published by Taylor & Francis in STAR: Science & Technology of Archaeological Research
- Vol. 1 (2) , 70-80
A methodology for qualitative archaeometallurgical fieldwork using a handheld X-ray fluorescence spectrometer
Recent work aimed at provenancing metal slag from Sagalassos, south-west Turkey, as part of a study investigating the Roman iron industry in the area. Although previously samples of the slag material had been exported from the country for the purposes of analysis, a method of analysing the materials in-situ was required. It was decided that the best technique for achieving ‘in-the-field’ results would be handheld X-ray fluorescence spectrometry (HH-XRF). A series of laboratory based tests were first performed in order to determine the ideal working parameters for the HH-XRF and the best method for preparing the samples. The results indicated that different slag (i.e. Ti-rich/poor) could clearly be distinguished amongst the powdered samples. A total of 45 metal slag were analysed in the field in order to see whether the slag could be qualitatively characterised based on provenance. The results of the field study indicated two principle groups (a high Ti – Zr group and a low Ti – Zr group). The Ca and Mn contents also split the data into two groups but these were not consistent with the previous Ti – Zr groups. These differences could be related to the choice of ores and fluxes used for iron production.
- 21 December 2015
- Published by Taylor & Francis in STAR: Science & Technology of Archaeological Research
- Vol. 1 (2) , 70-80
Open AccessA methodology for qualitative archaeometallurgical fieldwork using a handheld X-ray fluorescence spectrometer
Recent work aimed at provenancing metal slag from Sagalassos, south-west Turkey, as part of a study investigating the Roman iron industry in the area. Although previously samples of the slag material had been exported from the country for the purposes of analysis, a method of analysing the materials in-situ was required. It was decided that the best technique for achieving ‘in-the-field’ results would be handheld X-ray fluorescence spectrometry (HH-XRF). A series of laboratory based tests were first performed in order to determine the ideal working parameters for the HH-XRF and the best method for preparing the samples. The results indicated that different slag (i.e. Ti-rich/poor) could clearly be distinguished amongst the powdered samples. A total of 45 metal slag were analysed in the field in order to see whether the slag could be qualitatively characterised based on provenance. The results of the field study indicated two principle groups (a high Ti – Zr group and a low Ti – Zr group). The Ca and Mn contents also split the data into two groups but these were not consistent with the previous Ti – Zr groups. These differences could be related to the choice of ores and fluxes used for iron production.
- 1 June 2014
- Published by Elsevier in Journal of Archaeological Science
- Vol. 46, 229-230
The Origin of Our Species
- 1 June 2014
- Published by Elsevier in Journal of Archaeological Science
- Vol. 46, 229-230
The Origin of Our Species
- 23 January 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 27 (5) , 743-753
Roman glass across the Empire: an elemental and isotopic characterization
This study focuses on natron glass, dated from the 1st to 5th century AD, excavated in different areas of the Roman Empire. The eastern side of the Roman Empire is accounted for by three archaeological sites, Petra and Barsinia, both in Jordan, and Gonio, in Georgia. The Italian peninsula is represented by the Iulia Felix and Embiez shipwrecks, and by samples from Augusta Praetoria. Samples from Barcino in Spain are examples of the western side of the Empire, and the sites of Tienen and Oudenburg represent the northern provinces. No clear distinctions in glass composition and origin between the different regions of the Roman Empire can be made based on the major elemental compositions. However, the western, central and eastern Roman Empire samples can be divided into two groups, coloured and colourless, which also are reflected in the K2O contents. Sr–Nd isotopes, used for provenancing geological raw materials in primary glass production, indicate an eastern Mediterranean origin (εNd between −2.5 and −6.0) for most of the samples. Conversely, samples with more negative εNd, between −7.02 and −10.8, indicate a western Mediterranean origin. By applying this technique on samples from well known archaeological contexts, this study demonstrates that several primary glass factories were located throughout the Roman Empire. This is in contrast with current interpretations of late Roman to early Byzantine data.
- 23 January 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 27 (5) , 743-753
Roman glass across the Empire: an elemental and isotopic characterization
This study focuses on natron glass, dated from the 1st to 5th century AD, excavated in different areas of the Roman Empire. The eastern side of the Roman Empire is accounted for by three archaeological sites, Petra and Barsinia, both in Jordan, and Gonio, in Georgia. The Italian peninsula is represented by the Iulia Felix and Embiez shipwrecks, and by samples from Augusta Praetoria. Samples from Barcino in Spain are examples of the western side of the Empire, and the sites of Tienen and Oudenburg represent the northern provinces. No clear distinctions in glass composition and origin between the different regions of the Roman Empire can be made based on the major elemental compositions. However, the western, central and eastern Roman Empire samples can be divided into two groups, coloured and colourless, which also are reflected in the K2O contents. Sr–Nd isotopes, used for provenancing geological raw materials in primary glass production, indicate an eastern Mediterranean origin (εNd between −2.5 and −6.0) for most of the samples. Conversely, samples with more negative εNd, between −7.02 and −10.8, indicate a western Mediterranean origin. By applying this technique on samples from well known archaeological contexts, this study demonstrates that several primary glass factories were located throughout the Roman Empire. This is in contrast with current interpretations of late Roman to early Byzantine data.
- 1 December 2011
- Published by Elsevier in Journal of Archaeological Science
- Vol. 38 (12) , 3696-3697
The Archaeology of Britain: An Introduction from Earliest Times to the Twenty-first Century
- 1 December 2011
- Published by Elsevier in Journal of Archaeological Science
- Vol. 38 (12) , 3696-3697
The Archaeology of Britain: An Introduction from Earliest Times to the Twenty-first Century