LZLiang Zhou

Liang Zhou

*This is an algorithmically generated author record based on publicly available information.

Liang Zhou has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SPoTKD: A Protocol for Symmetric Key Distribution Over Public Channels Using Self-Powered Timekeeping Devices

    by Mustafizur Rahman, Liang Zhou, Shantanu Chakrabartty

    In this paper, we propose a novel class of symmetric key distribution protocol that leverages basic security primitives offered by low-cost, hardware chipsets containing millions of synchronized self-powered timers. The keys are derived from the temporal dynamics of a physical, micro-scale time-keeping device which makes the keys immune to any potential side-channel attacks, malicious tampering, or snooping. Using the behavioral model of the self-powered timers, we first show that the derived key-strings can pass the randomness test as defined by the National Institute of Standards and Technology (NIST) suite. The key-strings are then used in two SPoTKD (Self-Powered Timer Key Distribution) protocols that exploit the timer’s dynamics as one-way functions: (a) protocol 1 facilitates secure communications between a user and a remote Server; and (b) protocol 2 facilitates secure communications between two users. In this paper, we investigate the security of these protocols under standard model and against different adversarial attacks. Using Monte-Carlo simulations, we also investigate the robustness of these protocols in the presence of real-world operating conditions and propose error-correcting SPoTKD protocols to mitigate these noise-related artifacts.


  • Desynchronization of Self-Powered FN Tunneling Timers for Trust Verification of IoT Supply Chain

    by Liang Zhou, Sri Harsha Kondapalli, Kenji Aono, Shantanu Chakrabartty

    The ability to precisely synchronize and desynchronize two spatially separated dynamical systems according to changes in their respective operating environment provides a powerful mechanism for authentication and trust verification in a supply chain. This paper explores the synchronization and desynchronization paradigm using our previously reported self-powered time-keeping device, to differentiate among passive Internet-of-Things (IoT) devices that were subjected to different variations in temperature or their ambient radio-frequency environment. The environmental variations were modeled as a modulation voltage that affects the rate of Fowler-Nordheim (FN) quantum tunneling and integration of electrons on a floating-gate, thus producing a time and history-dependent dynamic signature. We show that the operation of the self-powered FN device is reliable and repeatable even at single electron-per-second tunneling-rates and for durations greater than three years. We believe that the proposed solution could be cost-effective and scalable for authenticating different types of passive IoT ranging from credit cards, packaged chipsets, to pharmaceuticals.


  • A CMOS Timer-Injector Integrated Circuit for Self-Powered Sensing of Time-of-Occurrence

    by Liang Zhou, Kenji Aono, Shantanu Chakrabartty

    Self-powered sensing of the time-of-occurrence of an event is challenging, because it requires access to a reliable time reference or a synchronized clock. In this paper, we propose for the first time a self-powered integrated circuit that is capable of time-stamping asynchronous mechanical events of interest. The core of the proposed design is the integration of two self-powered modules: 1) a chip-scale Fowler-Nordheim tunneling-based timer array, for generating a precision, relative time reference; and 2) a linear piezoelectricity-driven hot-electron injector acting as a floating-gate memory to record the onset of mechanical events. This paper presents measured results from a 4 x 4 fully programmable timer array system-on-chip (SoC) and a linear injector array SoC, both of which have been prototyped in a standard double-poly CMOS process. The synchronization error of the timer array with respect to an external software clock was measured to be less than 1% over a duration of 100 h, and the average accuracy in sensing the time-of-occurrence of the event was measured to be 6.9%. The minimum activation energy of the self-powered system was measured to be 840 nJ (measured for event durations of 1 s), which is significantly lower than the energy that can be harvested from typical mechanical impacts.


  • Dynamic Authentication Protocol Using Self-Powered Timers for Passive Internet of Things

    by M. H. Afifi, Liang Zhou, Shantanu Chakrabartty, Jian Ren

    Passive Internet of Things (IoT) like radio frequency identification (RFID) tags can be used to offer a wide range of services, such as object tracking or classification, marking ownership, noting boundaries, and indicating identities. While the communication link between a reader of the tag and the authentication server is generally assumed to be secure, the communication link between the reader and participating tags is mostly vulnerable to malicious acts. Many authentication protocols have been proposed in literature, however, they either are vulnerable to certain types of attacks or require prohibitively a large amount of computational resources to be implemented on a passive tag. In this paper, we present variants of a novel authentication protocol that can overcome the security flaws of previous protocols while being well suited to the computational capability of the tags. At the core of the proposed approach is our recently demonstrated self-powered timing devices that can be used for robust time-keeping and synchronization without the need for any external powering. The outputs of the timers are processed using a single hash function on the tag to produce tokens that continuously change with time, while being synchronized to tokens generated by the authentication server. The proposed protocol also incorporates margins of tolerance that make the authentication process robust to any deviations in the timer responses due to fabrication artifacts.


  • Self-powered continuous time-temperature monitoring for cold-chain management

    by Liang Zhou, Shantanu Chakrabartty

    Temperature management of the food supply-chain is important for ensuring compliance and the quality of perishable products like vaccines and fish. While conventional strategies have relied on using monitors attached to packaging containers, self-powered time-temperature monitoring is attractive because the technology can be embedded with passive RFID tags and can be integrated with every food or medical package. In this paper we propose a self-powered sensor that can monitor the time-temperature information without the need for any external powering. The sensor exploits the physics of Fowler-Nordheim (FN) tunneling where electrons are thermally excited and are continuously integrated on a floating-gate. The steady-state FN integrator's response depends on the temperature and corresponds to a temporal curve that is unique to a specific ambient temperature. Deviation from the set ambient temperature results in the deviation from its reference response curve hence can be captured by the sensor. Measured results from sensors prototyped in a 0.5 μm CMOS process show a temperature sensitivity of 1.5mV/°C over a monitoring duration of 100 hours.


  • Secure dynamic authentication of passive assets and passive IoTs using self-powered timers

    by Liang Zhou, Shantanu Chakrabartty

    A major limitation in authenticating passive and remotely powered sensors, tags and cards (for e.g. radio-frequency identification tags or credit cards) is that these devices do not have access to a continuously running system clock. This obviates the use of SecureID type authentication techniques involving random keys and tokens that need to be periodically generated and synchronized. In this paper we present a dynamic hardware-software authentication approach for passive assets using zero-power timers and synchronization circuits. The timers are shown to achieve robust temporal synchronization due to the self-powering and self-compensating physics of Fowler-Nordheim (FN) quantum transport of electrons tunneling onto a floating-gate. The output of the timers are then used to seed a pseudorandom number generator which produce random and synchronized authentication tokens. We validate the proposed approach using prototypes fabricated in a standard 0.5μm CMOS process where we demonstrate synchronization accuracy greater than 40dB. Compared to conventional static authentication methods that are currently used for passive sensors, tags and cards, the proposed dynamic approach should provide enhanced security and make it more immune to counterfeiting and data theft.


  • Open Access

    Self-Powered Timekeeping and Synchronization Using Fowler–Nordheim Tunneling-Based Floating-Gate Integrators

    by Liang Zhou, Shantanu Chakrabartty

    Self-powered timers provide a mechanism to achieve temporal synchronization between two passive devices (for e.g., RF tags, credit/access cards, and thumb drives) without the need for any external powering or clocks. As a result, the timers could be used to implement dynamic SecureID type authentication involving random keys and tokens that need to be periodically generated and synchronized. We report a novel solid-state self-powered timer, which exploits a self-compensating mechanism in the physics of Fowler-Nordheim quantum transport of electrons tunneling onto a floating gate. The proposed devices have been fabricated using standard CMOS processing and are demonstrated to be operational for durations greater than three years using extrapolation studies. The fabricated devices were also found to be extremely robust to device mismatch and as a result of which, the proposed self-powered timers can be synchronized with respect to each other with an accuracy greater than 0.5%.


  • Self-powered sensing and time-stamping of rare events using CMOS Fowler-Nordheim tunneling timers

    by Liang Zhou, Shantanu Chakrabartty

    This paper explores the use of continuous-time Fowler-Nordheim (FN) tunneling for implementing self-powered CMOS sensors that can be used to simultaneously measure and time-stamp occurrences of rare signal events. At the core of the proposed design is a floating-gate device where the FN based electron tunneling is induced through the thin gate-oxide and the control gate is used to couple the signal that is being measured and time-stamped. The signal then modulates the shape of the FN tunneling barrier which is captured by the tunneling rate of electrons being stored on the floating-gate. Thus the sensor continuously operates without the need for any external powering and the data from the sensor can be retrieved to reconstruct the occurrence of events offline. The proof-of-concept has been validated using prototypes fabricated in a standard 0.5-μm CMOS process and the measurement results show that less than 100 fJ of sensing energy is required for event recording and time-stamping.


  • Open Access

    A 5 nW Quasi-Linear CMOS Hot-Electron Injector for Self-Powered Monitoring of Biomechanical Strain Variations

    by Liang Zhou, Adam C. Abraham, Simon Y. Tang, Shantanu Chakrabartty

    Piezoelectricity-driven hot-electron injectors (p-HEI) are used for self-powered monitoring of mechanical activity in biomechanical implants and structures. Previously reported p-HEI devices operate by harvesting energy from a piezoelectric transducer to generate current and voltage references which are then used for initiating and controlling the process of hot-electron injection. As a result, the minimum energy required to activate the device is limited by the power requirements of the reference circuits. In this paper we present a p-HEI device that operates by directly exploiting the self-limiting capability of an energy transducer when driving the process of hot-electron injection in a pMOS floating-gate transistor. As a result, the p-HEI device can activate itself at input power levels less than 5 nW. Using a prototype fabricated in a 0.5- μm bulk CMOS process we validate the functionality of the proposed injector and show that for a fixed input power, its dynamics is quasi-linear with respect to time. The paper also presents measurement results using a cadaver phantom where the fabricated p-HEI device has been integrated with a piezoelectric transducer and is used for self-powered monitoring of mechanical activity.


  • Approaching the limits of piezoelectricity driven hot-electron injection for self-powered in vivo monitoring of micro-strain variations

    by Liang Zhou, Adam C. Abraham, Simon Y. Tang, Shantanu Chakrabartty

    In this paper we explore the limits of self-powering a piezoelectricity driven hot-electron injection (p-HEI) device used for monitoring mechanical activity in biomechanical implants and structures. Previously reported p-HEI devices operate by harvesting energy from a piezoelectric transducer to generate current an voltage references which are then used for initiating and controlling the process of hot-electron injection. As a result, the minimum energy required to activate the device is limited by the power requirements of the reference circuits. The p-HEI device presented in this paper operates by directly exploiting the self-limiting capability of an energy transducer when driving the process of hot-electron injection in a pMOS floating-gate transistor. As a result we show that the p-HEI device can activate itself at input power levels less than 10 nW. Using a prototype fabricated in a 0.5-μm bulk CMOS process we validate the functionality of the proposed injector and show that for a fixed input power, its dynamics is quasi-linear with respect to time. The paper also presents measurement results using a cadaver bone where the fabricated p-HEI device has been integrated with a piezoelectric transducer and is used for self-powered monitoring of mechanical activity.