Pengzhang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pengzhang Li has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Zhe Lü
School of Physics, Harbin Institute of Technology, Harbin, China
6 shared publications- Chuanjin Tian
Institute of New Energy Materials and Devices, School of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen 333403, China
4 shared publications - Bo Wei
School of Physics, Heilongjiang Provincial Key Laboratory of Advanced Quantum Functional Materials and Sensor Components, Harbin Institute of Technology 1 , Harbin 150001
3 shared publications - Chang-An Wang
Tsinghua University
3 shared publications Xiqiang Huang
3 shared publicationsYaohui Zhang
3 shared publications
Latest Publications
- Open Access
Performance Degradation of a Double-Perovskite PrBaCo2O5+δ Cathode Operating under a CO2/H2O-Containing Atmosphere
The electrochemical activity and stability of the PBCO electrode are investigated under the annealing processes in an atmosphere containing CO2/H2O for solid oxide fuel cells (SOFCs). The electrochemical impedance spectrum results unequivocally confirm the significant deterioration in PBCO cathode performance upon annealing under ambient air conditions, particularly when exposed to CO2/H2O atmospheres. Microstructure and surface chemical state analyses reveal the segregation of BaO on the PBCO surface, and the formation of insulating BaCO3 degraded the electrochemical performance. CO2 and H2O exhibit a significant induced effect on the segregation of Ba in PBCO to the surfaces, thereby causing a rapid decline in electrode performance. Additionally, the analysis of volume relaxation reveals that the presence of oxygen in the electrode environment can also influence the deposition process occurring on the surface of the electrode. However, this phenomenon is not observed in N2. This study emphasizes the impact of various gases present in the working atmosphere on surface-separated BaO, which consequently plays a pivotal role in the activity and long-term stability of PBCO electrodes.
Open AccessPerformance Degradation of a Double-Perovskite PrBaCo2O5+δ Cathode Operating under a CO2/H2O-Containing Atmosphere
The electrochemical activity and stability of the PBCO electrode are investigated under the annealing processes in an atmosphere containing CO2/H2O for solid oxide fuel cells (SOFCs). The electrochemical impedance spectrum results unequivocally confirm the significant deterioration in PBCO cathode performance upon annealing under ambient air conditions, particularly when exposed to CO2/H2O atmospheres. Microstructure and surface chemical state analyses reveal the segregation of BaO on the PBCO surface, and the formation of insulating BaCO3 degraded the electrochemical performance. CO2 and H2O exhibit a significant induced effect on the segregation of Ba in PBCO to the surfaces, thereby causing a rapid decline in electrode performance. Additionally, the analysis of volume relaxation reveals that the presence of oxygen in the electrode environment can also influence the deposition process occurring on the surface of the electrode. However, this phenomenon is not observed in N2. This study emphasizes the impact of various gases present in the working atmosphere on surface-separated BaO, which consequently plays a pivotal role in the activity and long-term stability of PBCO electrodes.
- Open Access
Facile Synthesis of Co Nanoparticles Embedded in N-Doped Carbon Nanotubes/Graphitic Nanosheets as Bifunctional Electrocatalysts for Electrocatalytic Water Splitting
Developing robust and cost-effective electrocatalysts to boost hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs) is crucially important to electrocatalytic water splitting. Herein, bifunctional electrocatalysts, by coupling Co nanoparticles and N-doped carbon nanotubes/graphitic nanosheets (Co@NCNTs/NG), were successfully synthesized via facile high-temperature pyrolysis and evaluated for water splitting. The morphology and particle size of products were influenced by the precursor type of the cobalt source (cobalt oxide or cobalt nitrate). The pyrolysis product prepared using cobalt oxide as a cobalt source (Co@NCNTs/NG-1) exhibited the smaller particle size and higher specific surface area than that of the pyrolysis products prepared using cobalt nitrate as a cobalt source (Co@NCNTs/NG-2). Notably, Co@NCNTs/NG-1 displayed much lower potential −0.222 V vs. RHE for HER and 1.547 V vs. RHE for OER at the benchmark current density of 10 mA cm−2 than that of Co@NCNTs/NG-2, which indicates the higher bifunctional catalytic activities of Co@NCNTs/NG-1. The water-splitting device using Co@NCNTs/NG-1 as both an anode and cathode demonstrated a potential of 1.92 V to attain 10 mA cm−2 with outstanding stability for 100 h. This work provides a facile pyrolysis strategy to explore highly efficient and stable bifunctional electrocatalysts for water splitting.
Open AccessFacile Synthesis of Co Nanoparticles Embedded in N-Doped Carbon Nanotubes/Graphitic Nanosheets as Bifunctional Electrocatalysts for Electrocatalytic Water Splitting
Developing robust and cost-effective electrocatalysts to boost hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs) is crucially important to electrocatalytic water splitting. Herein, bifunctional electrocatalysts, by coupling Co nanoparticles and N-doped carbon nanotubes/graphitic nanosheets (Co@NCNTs/NG), were successfully synthesized via facile high-temperature pyrolysis and evaluated for water splitting. The morphology and particle size of products were influenced by the precursor type of the cobalt source (cobalt oxide or cobalt nitrate). The pyrolysis product prepared using cobalt oxide as a cobalt source (Co@NCNTs/NG-1) exhibited the smaller particle size and higher specific surface area than that of the pyrolysis products prepared using cobalt nitrate as a cobalt source (Co@NCNTs/NG-2). Notably, Co@NCNTs/NG-1 displayed much lower potential −0.222 V vs. RHE for HER and 1.547 V vs. RHE for OER at the benchmark current density of 10 mA cm−2 than that of Co@NCNTs/NG-2, which indicates the higher bifunctional catalytic activities of Co@NCNTs/NG-1. The water-splitting device using Co@NCNTs/NG-1 as both an anode and cathode demonstrated a potential of 1.92 V to attain 10 mA cm−2 with outstanding stability for 100 h. This work provides a facile pyrolysis strategy to explore highly efficient and stable bifunctional electrocatalysts for water splitting.
- Open Access
- 18 April 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13  (8) , 1400
Constructing 3D Skeleton on Commercial Copper Foil via Electrophoretic Deposition of Lithiophilic Building Blocks for Stable Lithium Metal Anodes
Lithium (Li) metal has been regarded as the "Holy Grail" of Li battery anodes thanks to its high theoretic specific capacity and low reduction potential, but uneven formation of Li dendrites and uncontrollable Li volume changes hinder the practical applications of Li metal anodes. A three-dimensional (3D) current collector is one of the promising strategies to address the above issues if it can be compatible with current industrialized process. Here, Au-decorated carbon nanotubes (Au@CNTs) are electrophoretically deposited on commercial Cu foil as a 3D lithiophilic skeleton to regulate Li deposition. The thickness of the as-prepared 3D skeleton can be accurately controlled by adjusting the deposition time. Benefitting from the reduced localized current density and improved Li affinity, the Au@CNTs-deposited Cu foil (Au@CNTs@Cu foil) achieves uniform Li nucleation and dendrite-free Li deposition. Compared with bare Cu foil and CNTs deposited Cu foil (CNTs@Cu foil), the Au@CNTs@Cu foil exhibits enhanced Coulombic efficiency and better cycling stability. In the full-cell configuration, the Au@CNTs@Cu foil with predeposited Li shows superior stability and rate performance. This work provides a facial strategy to directly construct a 3D skeleton on commercial Cu foils with lithiophilic building blocks for stable and practical Li metal anodes.
- 18 April 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13  (8) , 1400
Open AccessConstructing 3D Skeleton on Commercial Copper Foil via Electrophoretic Deposition of Lithiophilic Building Blocks for Stable Lithium Metal Anodes
Lithium (Li) metal has been regarded as the "Holy Grail" of Li battery anodes thanks to its high theoretic specific capacity and low reduction potential, but uneven formation of Li dendrites and uncontrollable Li volume changes hinder the practical applications of Li metal anodes. A three-dimensional (3D) current collector is one of the promising strategies to address the above issues if it can be compatible with current industrialized process. Here, Au-decorated carbon nanotubes (Au@CNTs) are electrophoretically deposited on commercial Cu foil as a 3D lithiophilic skeleton to regulate Li deposition. The thickness of the as-prepared 3D skeleton can be accurately controlled by adjusting the deposition time. Benefitting from the reduced localized current density and improved Li affinity, the Au@CNTs-deposited Cu foil (Au@CNTs@Cu foil) achieves uniform Li nucleation and dendrite-free Li deposition. Compared with bare Cu foil and CNTs deposited Cu foil (CNTs@Cu foil), the Au@CNTs@Cu foil exhibits enhanced Coulombic efficiency and better cycling stability. In the full-cell configuration, the Au@CNTs@Cu foil with predeposited Li shows superior stability and rate performance. This work provides a facial strategy to directly construct a 3D skeleton on commercial Cu foils with lithiophilic building blocks for stable and practical Li metal anodes.
- Open Access
The Role of the A-Site Cation on the Bifunctional Electrocatalytic Activities of Ln0.5Sr0.5CoO3-δ (Ln = La, Pr and Sm) for Rechargeable Zinc–Air Batteries
Developing efficient bifunctional electrocatalysts for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is crucial for the large-scale application of rechargeable zinc–air batteries. Perovskite oxides are attractive candidates as bifunctional electrocatalysts. Herein, Ln0.5Sr0.5CoO3-δ (Ln = La, Pr and Sm) was prepared by the sol-gel method and evaluated as bifunctional electrocatalysts for both ORR and OER. Compare with La0.5Sr0.5CoO3-δ (LSC) and Sm0.5Sr0.5CoO3-δ (SSC), Pr0.5Sr0.5CoO3-δ (PSC) demonstrated the enhanced catalytic activity towards ORR with the limiting current density of 4.19 mA cm−2 at 0.40 V vs. RHE and OER with the potential of 1.75 V vs. RHE at 10 mA cm−2 as well as the Tafel slope of 105 mV dec−1. The higher Co3+/Co2+ ratio in PSC played an essential part in boosting the bifunctional electrocatalytic activities for ORR and OER. For demonstration, rechargeable zinc–air batteries with PSC as the air electrode displayed the maximum power density of 72 mW cm−2, the low charge-discharge voltage gap (1.01 V) at 10 mA cm−2 over 80 cycles and outstanding cycling stability. This work highlights the importance of A-site cations of the perovskite oxide as a valid strategy to improve ORR and OER activities.
Open AccessThe Role of the A-Site Cation on the Bifunctional Electrocatalytic Activities of Ln0.5Sr0.5CoO3-δ (Ln = La, Pr and Sm) for Rechargeable Zinc–Air Batteries
Developing efficient bifunctional electrocatalysts for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is crucial for the large-scale application of rechargeable zinc–air batteries. Perovskite oxides are attractive candidates as bifunctional electrocatalysts. Herein, Ln0.5Sr0.5CoO3-δ (Ln = La, Pr and Sm) was prepared by the sol-gel method and evaluated as bifunctional electrocatalysts for both ORR and OER. Compare with La0.5Sr0.5CoO3-δ (LSC) and Sm0.5Sr0.5CoO3-δ (SSC), Pr0.5Sr0.5CoO3-δ (PSC) demonstrated the enhanced catalytic activity towards ORR with the limiting current density of 4.19 mA cm−2 at 0.40 V vs. RHE and OER with the potential of 1.75 V vs. RHE at 10 mA cm−2 as well as the Tafel slope of 105 mV dec−1. The higher Co3+/Co2+ ratio in PSC played an essential part in boosting the bifunctional electrocatalytic activities for ORR and OER. For demonstration, rechargeable zinc–air batteries with PSC as the air electrode displayed the maximum power density of 72 mW cm−2, the low charge-discharge voltage gap (1.01 V) at 10 mA cm−2 over 80 cycles and outstanding cycling stability. This work highlights the importance of A-site cations of the perovskite oxide as a valid strategy to improve ORR and OER activities.
- Open Access
- 13 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13  (4) , 715
MOF-Derived CoNi Nanoalloy Particles Encapsulated in Nitrogen-Doped Carbon as Superdurable Bifunctional Oxygen Electrocatalyst
Carbon-encapsulated transition metal catalysts have caught the interest of researchers in the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) due to their distinctive architectures and highly tunable electronic structures. In this work, we synthesized N-doped carbon encapsulated with CoNi nanoalloy particles (CoNi@NC) as the electrocatalysts. The metal-organic skeleton ZIF-67 nanocubes were first synthesized, and then Ni2+ ions were inserted to generate CoNi-ZIF precursors by a simple ion-exchange route, which was followed by pyrolysis and with urea for the introduction of nitrogen (N) at a low temperature to synthesize CoNi@NC composites. The results reveal that ZIF-67 pyrolysis can dope more N atoms in the carbon skeleton and that the pyrolysis temperature influences the ORR and OER performances. The sample prepared by CoNi@NC pyrolysis at 650 °C has a high N content (9.70%) and a large specific surface area (167 m2 g−1), with a positive ORR onset potential (Eonset) of 0.89 V vs. RHE and half-wave potential (E1/2) of 0.81 V vs. RHE in 0.1 M KOH, and the overpotential of the OER measured in 1 M KOH was only 286 mV at 10 mA cm−2. The highly efficient bifunctional ORR/OER electrocatalysts synthesized by this method can offer some insights into the design and synthesis of complex metal-organic frameworks (MOFs) hybrid structures and their derivatives as functional materials in energy storage.
- 13 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13  (4) , 715
Open AccessMOF-Derived CoNi Nanoalloy Particles Encapsulated in Nitrogen-Doped Carbon as Superdurable Bifunctional Oxygen Electrocatalyst
Carbon-encapsulated transition metal catalysts have caught the interest of researchers in the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) due to their distinctive architectures and highly tunable electronic structures. In this work, we synthesized N-doped carbon encapsulated with CoNi nanoalloy particles (CoNi@NC) as the electrocatalysts. The metal-organic skeleton ZIF-67 nanocubes were first synthesized, and then Ni2+ ions were inserted to generate CoNi-ZIF precursors by a simple ion-exchange route, which was followed by pyrolysis and with urea for the introduction of nitrogen (N) at a low temperature to synthesize CoNi@NC composites. The results reveal that ZIF-67 pyrolysis can dope more N atoms in the carbon skeleton and that the pyrolysis temperature influences the ORR and OER performances. The sample prepared by CoNi@NC pyrolysis at 650 °C has a high N content (9.70%) and a large specific surface area (167 m2 g−1), with a positive ORR onset potential (Eonset) of 0.89 V vs. RHE and half-wave potential (E1/2) of 0.81 V vs. RHE in 0.1 M KOH, and the overpotential of the OER measured in 1 M KOH was only 286 mV at 10 mA cm−2. The highly efficient bifunctional ORR/OER electrocatalysts synthesized by this method can offer some insights into the design and synthesis of complex metal-organic frameworks (MOFs) hybrid structures and their derivatives as functional materials in energy storage.
- Open Access
- 6 February 2021
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 10  (2) , 328-337
Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2−δ as a promising bifunctional oxygen electrode for reversible solid oxide cells
In this work, La2NiO4+δ-xCe0.55La0.45O2−δ (denoted as LNO-xLDC) with various LDC contents (x = 0, 10, 20, 30, and 40 wt%) were prepared and evaluated as bifunctional oxygen electrodes for reversible solid oxide cells (RSOCs). Compared with the pure LNO, the optimum composition of LNO-30LDC exhibited the lowest polarization resistance (Rp) of 0.53 and 0.12 Ω·cm2 in air at 650 and 750 °C, respectively. The enhanced electrochemical performance of LNO-30LDC oxygen electrode was mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode displayed peak power densities of 276, 401, and 521 mW·cm−2 at 700, 750, and 800 °C, respectively. Moreover, the electrolysis current density of the single cell demonstrated 526.39 mA·cm−2 under 1.5 V at 800 °C, and the corresponding hydrogen production rate was 220.03 mL·cm−2·h−1. The encouraging results indicated that LNO-30LDC was a promising bifunctional oxygen electrode material for RSOCs.
- 6 February 2021
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 10  (2) , 328-337
Open AccessElectrochemical performance of La2NiO4+δ-Ce0.55La0.45O2−δ as a promising bifunctional oxygen electrode for reversible solid oxide cells
In this work, La2NiO4+δ-xCe0.55La0.45O2−δ (denoted as LNO-xLDC) with various LDC contents (x = 0, 10, 20, 30, and 40 wt%) were prepared and evaluated as bifunctional oxygen electrodes for reversible solid oxide cells (RSOCs). Compared with the pure LNO, the optimum composition of LNO-30LDC exhibited the lowest polarization resistance (Rp) of 0.53 and 0.12 Ω·cm2 in air at 650 and 750 °C, respectively. The enhanced electrochemical performance of LNO-30LDC oxygen electrode was mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode displayed peak power densities of 276, 401, and 521 mW·cm−2 at 700, 750, and 800 °C, respectively. Moreover, the electrolysis current density of the single cell demonstrated 526.39 mA·cm−2 under 1.5 V at 800 °C, and the corresponding hydrogen production rate was 220.03 mL·cm−2·h−1. The encouraging results indicated that LNO-30LDC was a promising bifunctional oxygen electrode material for RSOCs.
- Open Access
- 10 December 2020
- Published by Springer Nature in Research Square
Electrochemical p erformance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells
In this work, La2NiO4+δ-xCe0.55La0.45O2-δ (denoted as LNO-xLDC) with various LDC contents (x = 0, 10, 20, 30 and 40, wt %) were prepared and evaluated as bifunctional oxygen electrodes for reversible solid oxide cells (RSOCs). Compared with the pure LNO, the optimum composition of LNO-30LDC exhibited the lowest polarization resistance (Rp) of 0.53 and 0.12 Ω·cm2 in air at 650 and 750 oC, respectively. The enhanced electrochemical performance of LNO-30LDC oxygen electrode was mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode displayed peak power densities of 276, 401 and 521 mW·cm-2 at 700, 750 and 800 oC, respectively. Moreover, the electrolysis current density of the single cell demonstrated 526.39 mA·cm-2 under 1.5 V at 800 oC, and the corresponding hydrogen production rate was 220.03 ml·cm-2·h-1. The encouraging results indicated that LNO-30LDC was a promising bifunctional oxygen electrode material for RSOCs.
- 10 December 2020
- Published by Springer Nature in Research Square
Open AccessElectrochemical p erformance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells
In this work, La2NiO4+δ-xCe0.55La0.45O2-δ (denoted as LNO-xLDC) with various LDC contents (x = 0, 10, 20, 30 and 40, wt %) were prepared and evaluated as bifunctional oxygen electrodes for reversible solid oxide cells (RSOCs). Compared with the pure LNO, the optimum composition of LNO-30LDC exhibited the lowest polarization resistance (Rp) of 0.53 and 0.12 Ω·cm2 in air at 650 and 750 oC, respectively. The enhanced electrochemical performance of LNO-30LDC oxygen electrode was mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode displayed peak power densities of 276, 401 and 521 mW·cm-2 at 700, 750 and 800 oC, respectively. Moreover, the electrolysis current density of the single cell demonstrated 526.39 mA·cm-2 under 1.5 V at 800 oC, and the corresponding hydrogen production rate was 220.03 ml·cm-2·h-1. The encouraging results indicated that LNO-30LDC was a promising bifunctional oxygen electrode material for RSOCs.
- 1 June 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44  (29) , 14493-14499
Effects of a YSZ porous layer between electrolyte and oxygen electrode in solid oxide electrolysis cells on the electrochemical performance and stability
- 1 June 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44  (29) , 14493-14499
Effects of a YSZ porous layer between electrolyte and oxygen electrode in solid oxide electrolysis cells on the electrochemical performance and stability
- 1 January 2019
- Published by Elsevier in Applied Surface Science
- Vol. 464, 494-501
La1.7Sr0.3Co0.5Ni0.5O4+δ layered perovskite as an efficient bifunctional electrocatalyst for rechargeable zinc-air batteries
- 1 January 2019
- Published by Elsevier in Applied Surface Science
- Vol. 464, 494-501
La1.7Sr0.3Co0.5Ni0.5O4+δ layered perovskite as an efficient bifunctional electrocatalyst for rechargeable zinc-air batteries
- 1 November 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43  (48) , 21959-21968
In-situ reduction synthesis of La2O3/NiM-NCNTs (M = Fe, Co) as efficient bifunctional electrocatalysts for oxygen reduction and evolution reactions
- 1 November 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43  (48) , 21959-21968
In-situ reduction synthesis of La2O3/NiM-NCNTs (M = Fe, Co) as efficient bifunctional electrocatalysts for oxygen reduction and evolution reactions