Miloš Radosavljević
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Miloš Radosavljević has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandra Torbica
Institute of Food Technology in Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia
12 shared publications Jelena Pejin
Faculty of Technology, University of Novi Sad, Bulevar Cara Lazara 1, 21 000 Novi Sad, Serbia
10 shared publicationsLjiljana Mojović
University of Belgrade, Karnegijeva 4, 11 000 Belgrade, Serbia
10 shared publications- Milorad Miljić
Institute of Food Technology in Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia
9 shared publications - Aleksandra Djukić-Vuković
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia
8 shared publications Sunčica Kocić-Tanackov
Faculty of Technology; University of Novi Sad; 21 000 Novi Sad Bulevar cara Lazara 1 Serbia
8 shared publications
Latest Publications
- Open Access
Extruded Pseudocereal Snacks Mathematical Modelling Approaches for Prediction and Optimisation: A Review
Pseudocereals such as quinoa, amaranth, and buckwheat have attracted increasing attention as ingredients for extruded snack products because of their nutritional value, gluten-free status, and content of bioactive compounds. The quality of extruded products is governed by complex interactions among processing variables, including barrel temperature, screw speed, feed moisture content, and formulation characteristics. As a result, mathematical modelling has become an important tool for predicting product properties and identifying suitable processing conditions. This review summarizes modelling approaches applied to extruded food products with a focus on pseudocereal extrusion. Particular emphasis is placed on response surface methodology (RSM), artificial neural networks (ANNs), adaptive neuro-fuzzy inference systems (ANFIS), support vector regression (SVR), and hybrid optimisation strategies. Published studies indicate that RSM remains the most commonly used approach because of its simplicity and interpretability, while ANN-based models generally provide much higher predictive accuracy when strong nonlinear relationships are present. The widespread use of small experimental datasets and limited external validation remains a major challenge for the practical implementation of advanced machine-learning models. This review examines the strengths and limitations of current modelling approaches and discusses future opportunities for integrating predictive models with digital manufacturing frameworks.
Open AccessExtruded Pseudocereal Snacks Mathematical Modelling Approaches for Prediction and Optimisation: A Review
Pseudocereals such as quinoa, amaranth, and buckwheat have attracted increasing attention as ingredients for extruded snack products because of their nutritional value, gluten-free status, and content of bioactive compounds. The quality of extruded products is governed by complex interactions among processing variables, including barrel temperature, screw speed, feed moisture content, and formulation characteristics. As a result, mathematical modelling has become an important tool for predicting product properties and identifying suitable processing conditions. This review summarizes modelling approaches applied to extruded food products with a focus on pseudocereal extrusion. Particular emphasis is placed on response surface methodology (RSM), artificial neural networks (ANNs), adaptive neuro-fuzzy inference systems (ANFIS), support vector regression (SVR), and hybrid optimisation strategies. Published studies indicate that RSM remains the most commonly used approach because of its simplicity and interpretability, while ANN-based models generally provide much higher predictive accuracy when strong nonlinear relationships are present. The widespread use of small experimental datasets and limited external validation remains a major challenge for the practical implementation of advanced machine-learning models. This review examines the strengths and limitations of current modelling approaches and discusses future opportunities for integrating predictive models with digital manufacturing frameworks.
- Open Access
- 26 March 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (7) , 733
Integrated Chemometric and Neural Network Analysis for the Differentiation of Cucurbita maxima and Cucurbita moschata
This study examines the compositional differentiation of two Cucurbita species, C. maxima Duchesne and C. moschata Duchesne, to identify chemical markers relevant for their nutritional and functional potential. Multivariate statistical analysis, including principal component analysis (PCA), was applied to chromatographic, chemical, and antioxidant descriptors to visualize patterns of variability among samples. Classification artificial neural network (cANN) models were used to explore the potential of machine learning for sample differentiation, using integrated lipidomic, carotenoid, phenolic, and liquid chromatographic datasets, providing a multidimensional biochemical characterization of Cucurbita samples, achieving good classification within the analyzed dataset, reflecting the model’s capacity to describe the available data. The integration of chemometric and ANN approaches provides a framework for the compositional profiling and quality assessment of Cucurbita species, offering insights into their sustainable valorization as sources of bioactive compounds for food and nutraceutical applications while acknowledging the need for further validation on larger datasets.
- 26 March 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (7) , 733
Open AccessIntegrated Chemometric and Neural Network Analysis for the Differentiation of Cucurbita maxima and Cucurbita moschata
This study examines the compositional differentiation of two Cucurbita species, C. maxima Duchesne and C. moschata Duchesne, to identify chemical markers relevant for their nutritional and functional potential. Multivariate statistical analysis, including principal component analysis (PCA), was applied to chromatographic, chemical, and antioxidant descriptors to visualize patterns of variability among samples. Classification artificial neural network (cANN) models were used to explore the potential of machine learning for sample differentiation, using integrated lipidomic, carotenoid, phenolic, and liquid chromatographic datasets, providing a multidimensional biochemical characterization of Cucurbita samples, achieving good classification within the analyzed dataset, reflecting the model’s capacity to describe the available data. The integration of chemometric and ANN approaches provides a framework for the compositional profiling and quality assessment of Cucurbita species, offering insights into their sustainable valorization as sources of bioactive compounds for food and nutraceutical applications while acknowledging the need for further validation on larger datasets.
- Open Access
Structural, Swelling, and In Vitro Digestion Behavior of DEGDA-Crosslinked Semi-IPN Dextran/Inulin Hydrogels
In this study, semi-interpenetrating polymer network (semi-IPN) hydrogels based on methacrylated dextran and native inulin were designed as biodegradable carriers for the colon-specific delivery of uracil as a model antitumor compound. The hydrogels were synthesized via free-radical polymerization, using diethylene glycol diacrylate (DEGDA) as a crosslinking agent at varying concentrations (5, 7.5, and 10 wt%), and their structural, thermal, and biological properties were systematically evaluated. Fourier transform infrared spectroscopy (FTIR) confirmed successful crosslinking and physical incorporation of uracil through hydrogen bonding. Concurrently, differential scanning calorimetry (DSC) revealed an increase in glass transition temperature (Tg) with increasing crosslinking density (149, 153, and 156 °C, respectively). Swelling studies demonstrated relaxation-controlled, first-order swelling kinetics under physiological conditions (pH 7.4, 37 °C) and high gel fraction values (84.75, 91.34, and 94.90%, respectively), indicating stable network formation. SEM analysis revealed that the hydrogel morphology strongly depended on crosslinking density and drug incorporation, with increasing crosslinker content leading to a more compact and wrinkled structure. Uracil loading further modified the microstructure, promoting the formation of discrete crystalline domains within the semi-IPN hydrogels, indicative of physical drug entrapment. All formulations exhibited high encapsulation efficiencies (>86%), which increased with increasing crosslinker content, consistent with the observed gel fraction values. Simulated in vitro gastrointestinal digestion showed negligible drug release under gastric conditions and controlled release in the intestinal phase, primarily governed by crosslinking density. Antimicrobial assessment against Escherichia coli and Staphylococcus epidermidis, used as an initial or indirect indicator of cytotoxic potential, revealed no inhibitory activity, suggesting low biological reactivity at the screening level. Overall, the results indicate that DEGDA-crosslinked dextran/inulin semi-interpenetrating (semi-IPN) hydrogels represent promising carriers for colon-targeted antitumor drug delivery.
Open AccessStructural, Swelling, and In Vitro Digestion Behavior of DEGDA-Crosslinked Semi-IPN Dextran/Inulin Hydrogels
In this study, semi-interpenetrating polymer network (semi-IPN) hydrogels based on methacrylated dextran and native inulin were designed as biodegradable carriers for the colon-specific delivery of uracil as a model antitumor compound. The hydrogels were synthesized via free-radical polymerization, using diethylene glycol diacrylate (DEGDA) as a crosslinking agent at varying concentrations (5, 7.5, and 10 wt%), and their structural, thermal, and biological properties were systematically evaluated. Fourier transform infrared spectroscopy (FTIR) confirmed successful crosslinking and physical incorporation of uracil through hydrogen bonding. Concurrently, differential scanning calorimetry (DSC) revealed an increase in glass transition temperature (Tg) with increasing crosslinking density (149, 153, and 156 °C, respectively). Swelling studies demonstrated relaxation-controlled, first-order swelling kinetics under physiological conditions (pH 7.4, 37 °C) and high gel fraction values (84.75, 91.34, and 94.90%, respectively), indicating stable network formation. SEM analysis revealed that the hydrogel morphology strongly depended on crosslinking density and drug incorporation, with increasing crosslinker content leading to a more compact and wrinkled structure. Uracil loading further modified the microstructure, promoting the formation of discrete crystalline domains within the semi-IPN hydrogels, indicative of physical drug entrapment. All formulations exhibited high encapsulation efficiencies (>86%), which increased with increasing crosslinker content, consistent with the observed gel fraction values. Simulated in vitro gastrointestinal digestion showed negligible drug release under gastric conditions and controlled release in the intestinal phase, primarily governed by crosslinking density. Antimicrobial assessment against Escherichia coli and Staphylococcus epidermidis, used as an initial or indirect indicator of cytotoxic potential, revealed no inhibitory activity, suggesting low biological reactivity at the screening level. Overall, the results indicate that DEGDA-crosslinked dextran/inulin semi-interpenetrating (semi-IPN) hydrogels represent promising carriers for colon-targeted antitumor drug delivery.
- Open Access
Modeling and Optimization of Extruded Corn Product Fortification
The present study aimed to model and optimize the fortification of corn-based extruded flips with quinoa flour to improve their nutritional, functional, and sensory quality while maintaining desirable technological properties. Corn flour was partially replaced with quinoa flour at levels of 0, 10, 20, and 30%, and the mixtures were processed using a twin-screw extruder at three screw speeds (350, 500, and 650 rpm). The influence of formulation and mechanical energy input on product quality was evaluated through comprehensive characterization, including bulk density, expansion index, texture, color, chemical composition, mineral profile, amino acid and fatty acid composition, and descriptive sensory attributes. Response surface methodology (RSM) was applied to model the effects of quinoa addition and screw speed on 56 quality responses. The Z-score approach was employed to identify optimal processing conditions. The results showed that from a technological and nutritional perspective, formulations containing 20–30% quinoa processed at medium to high screw speeds (500–650 rpm) provided the most balanced products. Z-score optimization identified that the sample with 20% quinoa extruded at 650 rpm showed a balanced combination of enhanced nutritional characteristics and preserved physical and sensory quality.
Open AccessModeling and Optimization of Extruded Corn Product Fortification
The present study aimed to model and optimize the fortification of corn-based extruded flips with quinoa flour to improve their nutritional, functional, and sensory quality while maintaining desirable technological properties. Corn flour was partially replaced with quinoa flour at levels of 0, 10, 20, and 30%, and the mixtures were processed using a twin-screw extruder at three screw speeds (350, 500, and 650 rpm). The influence of formulation and mechanical energy input on product quality was evaluated through comprehensive characterization, including bulk density, expansion index, texture, color, chemical composition, mineral profile, amino acid and fatty acid composition, and descriptive sensory attributes. Response surface methodology (RSM) was applied to model the effects of quinoa addition and screw speed on 56 quality responses. The Z-score approach was employed to identify optimal processing conditions. The results showed that from a technological and nutritional perspective, formulations containing 20–30% quinoa processed at medium to high screw speeds (500–650 rpm) provided the most balanced products. Z-score optimization identified that the sample with 20% quinoa extruded at 650 rpm showed a balanced combination of enhanced nutritional characteristics and preserved physical and sensory quality.
- 1 January 2026
- Published by University Library in Kragujevac
- p. 695-702
ANN MODELING OF THE EXTRUDED PRODUCTS PHYSICAL AND TECHNOLOGICAL PROPERTIES
This study used artificial neural network (ANN) modeling to predict and optimize the physical and technological properties of quinoa-enriched extruded products. A multilayer perceptron model was developed to estimate bulk density (BD), expansion index (EI), hardness (Har), number of fractures (NF), and crispiness work (Crw) as functions of screw speed (350–650 rpm) and quinoa addition (0–30%). The model demonstrated high predictive accuracy and successfully passed goodness-of-fit tests. Global sensitivity analysis revealed that screw speed was the dominant factor, while higher quinoa levels and screw speeds promoted expansion and reduced density and hardness. The ANN approach proved effective for modeling and optimization of extrusion conditions.
- 1 January 2026
- Published by University Library in Kragujevac
- p. 695-702
ANN MODELING OF THE EXTRUDED PRODUCTS PHYSICAL AND TECHNOLOGICAL PROPERTIES
This study used artificial neural network (ANN) modeling to predict and optimize the physical and technological properties of quinoa-enriched extruded products. A multilayer perceptron model was developed to estimate bulk density (BD), expansion index (EI), hardness (Har), number of fractures (NF), and crispiness work (Crw) as functions of screw speed (350–650 rpm) and quinoa addition (0–30%). The model demonstrated high predictive accuracy and successfully passed goodness-of-fit tests. Global sensitivity analysis revealed that screw speed was the dominant factor, while higher quinoa levels and screw speeds promoted expansion and reduced density and hardness. The ANN approach proved effective for modeling and optimization of extrusion conditions.
- Open Access
Part II: The Influence of Crosslinking Agents on the Properties and Colon-Targeted Drug Delivery Efficacy of Dextran-Based Hydrogels
In this study, dextran-based hydrogels were synthesized in dimethyl sulfoxide via free-radical polymerization with three structurally different crosslinking agents: divinyl benzene (DVB), diethylene glycol diacrylate (DEGDA), and 4,4′-di(methacryloylamino)azobenzene (DMAAazoB). Their morphology, swelling ability, mechanical properties, and potential for controlled release of the model substance (uracil) were examined, with the results showing that the chemical structure and chain length of the crosslinking agents significantly influence the structural and functional properties of hydrogels. Hydrogels crosslinked with DMAAazoB showed the highest swelling ability at pH 3 and pH 6 (2552 and 1696%, respectively), associated with protonation effects and sponge-like morphology, while simultaneously showing the lowest mechanical strength (20 and 47 MPa). In vitro simulations of gastrointestinal digestion showed that uracil was not released in the gastric phase, while in the intestinal environment, the release was significant, especially in Dex-DMAAzoB hydrogels (88.52%). The absence of azoreductases in the simulated system indicates that the release of the drug in real conditions would likely be even more pronounced. The Dex-DAAazoB hydrogel exhibited a slight antibacterial effect, producing inhibition zones of 8 and 7 mm against Escherichia coli ATCC 8739 and Staphylococcus epidermidis ATCC 12228, respectively. In contrast, the remaining hydrogel formulations showed no detectable antibacterial activity toward either bacterial strain, indicating their microbiological inertness and supporting their suitability as carrier matrices for antitumor drug delivery in colorectal cancer therapy. The obtained results confirm that azo-crosslinked dextran hydrogels, with an optimized amount of crosslinking agent, are promising carriers for the targeted and controlled delivery of antitumor drugs to the colorectal region.
Open AccessPart II: The Influence of Crosslinking Agents on the Properties and Colon-Targeted Drug Delivery Efficacy of Dextran-Based Hydrogels
In this study, dextran-based hydrogels were synthesized in dimethyl sulfoxide via free-radical polymerization with three structurally different crosslinking agents: divinyl benzene (DVB), diethylene glycol diacrylate (DEGDA), and 4,4′-di(methacryloylamino)azobenzene (DMAAazoB). Their morphology, swelling ability, mechanical properties, and potential for controlled release of the model substance (uracil) were examined, with the results showing that the chemical structure and chain length of the crosslinking agents significantly influence the structural and functional properties of hydrogels. Hydrogels crosslinked with DMAAazoB showed the highest swelling ability at pH 3 and pH 6 (2552 and 1696%, respectively), associated with protonation effects and sponge-like morphology, while simultaneously showing the lowest mechanical strength (20 and 47 MPa). In vitro simulations of gastrointestinal digestion showed that uracil was not released in the gastric phase, while in the intestinal environment, the release was significant, especially in Dex-DMAAzoB hydrogels (88.52%). The absence of azoreductases in the simulated system indicates that the release of the drug in real conditions would likely be even more pronounced. The Dex-DAAazoB hydrogel exhibited a slight antibacterial effect, producing inhibition zones of 8 and 7 mm against Escherichia coli ATCC 8739 and Staphylococcus epidermidis ATCC 12228, respectively. In contrast, the remaining hydrogel formulations showed no detectable antibacterial activity toward either bacterial strain, indicating their microbiological inertness and supporting their suitability as carrier matrices for antitumor drug delivery in colorectal cancer therapy. The obtained results confirm that azo-crosslinked dextran hydrogels, with an optimized amount of crosslinking agent, are promising carriers for the targeted and controlled delivery of antitumor drugs to the colorectal region.
- Open Access
- 23 December 2025
- Published by MDPI AG in Preprints.org
Design of DEGDA-Crosslinked Semi-IPN Dextran/Inulin Hydrogels for Antitumor Drug Delivery
Colon-targeted drug delivery systems are of considerable interest for improving the therapeutic efficacy of anticancer agents while minimizing systemic side effects. In this study, semi-interpenetrating polymer network (semi-IPN) hydrogels based on methacrylated dextran and native inulin were designed as biodegradable carriers for the colon-specific delivery of uracil as a model antitumor compound. The hydrogels were synthesized via free-radical polymerization, using diethylene glycol diacrylate (DEGDA) as a crosslinking agent at varying concentrations (5, 7.5, and 10 wt%), and their structural, thermal, and biological properties were systematically evaluated. Fourier transform infrared spectroscopy (FTIR) confirmed successful crosslinking and physical incorporation of uracil through hydrogen bonding. At the same time, differential scanning calorimetry (DSC) revealed an increase in glass transition temperature (Tg) with increasing crosslinking density (149, 153, and 156 °C, respectively). Swelling studies demonstrated relaxation-controlled, first-order swelling kinetics under physiological conditions (pH 7.4, 37 °C), and high gel fraction values (84.75, 91.34, 94.90%, respectively) indicated stable network formation. All formulations exhibited high encapsulation efficiencies (>86%), which increased with increasing crosslinker content, consistent with the observed gel fraction values. Simulated in vitro gastrointestinal digestion showed negligible drug release under gastric conditions and controlled release in the intestinal phase, primarily governed by crosslinking density. Antimicrobial assessment against Escherichia coli and Staphylococcus epidermidis, used as an initial or indirect indicator of cytotoxic potential, revealed no inhibitory activity, suggesting low biological reactivity at the screening level. Overall, the results indicate that DEGDA-crosslinked dextran/inulin semi-interpenetrating polymer network (semi-IPN) hydrogels represent promising carriers for colon-targeted antitumor drug delivery.
- 23 December 2025
- Published by MDPI AG in Preprints.org
Open AccessDesign of DEGDA-Crosslinked Semi-IPN Dextran/Inulin Hydrogels for Antitumor Drug Delivery
Colon-targeted drug delivery systems are of considerable interest for improving the therapeutic efficacy of anticancer agents while minimizing systemic side effects. In this study, semi-interpenetrating polymer network (semi-IPN) hydrogels based on methacrylated dextran and native inulin were designed as biodegradable carriers for the colon-specific delivery of uracil as a model antitumor compound. The hydrogels were synthesized via free-radical polymerization, using diethylene glycol diacrylate (DEGDA) as a crosslinking agent at varying concentrations (5, 7.5, and 10 wt%), and their structural, thermal, and biological properties were systematically evaluated. Fourier transform infrared spectroscopy (FTIR) confirmed successful crosslinking and physical incorporation of uracil through hydrogen bonding. At the same time, differential scanning calorimetry (DSC) revealed an increase in glass transition temperature (Tg) with increasing crosslinking density (149, 153, and 156 °C, respectively). Swelling studies demonstrated relaxation-controlled, first-order swelling kinetics under physiological conditions (pH 7.4, 37 °C), and high gel fraction values (84.75, 91.34, 94.90%, respectively) indicated stable network formation. All formulations exhibited high encapsulation efficiencies (>86%), which increased with increasing crosslinker content, consistent with the observed gel fraction values. Simulated in vitro gastrointestinal digestion showed negligible drug release under gastric conditions and controlled release in the intestinal phase, primarily governed by crosslinking density. Antimicrobial assessment against Escherichia coli and Staphylococcus epidermidis, used as an initial or indirect indicator of cytotoxic potential, revealed no inhibitory activity, suggesting low biological reactivity at the screening level. Overall, the results indicate that DEGDA-crosslinked dextran/inulin semi-interpenetrating polymer network (semi-IPN) hydrogels represent promising carriers for colon-targeted antitumor drug delivery.
- Open Access
The Influence of Synthesis Parameters on the Properties of Dextran-Based Hydrogels for Colon-Targeted Antitumor Drug Delivery Part I: Room Temperature Synthesis of Dextran/Inulin Hydrogels for Colon-Targeted Antitumor Drug Delivery
This research successfully developed novel hydrogels composed of methacrylated dextran and inulin for targeted drug delivery in colorectal cancer therapy. The formulation exploits the natural degradation of both biopolymers by the large intestine’s microflora. A key achievement was the development of a room-temperature free radical polymerization synthesis method. The study thoroughly investigated how varying inulin content (10 and 20 wt%) influenced the hydrogels’ properties. The formulation with 20 wt% inulin exhibited the highest swelling ability at both pH 3 and pH 6, and consequently the lowest elastic modulus, measured by a newly established technique for granulated hydrogels. Using uracil as a model drug, in situ incorporated, confirmed that the greatest drug release occurs in the colorectal region for the neat dextran-based hydrogel, triggered by specific microbial enzymes. Notably, the addition of inulin did not enhance biodegradation-driven drug release in combination with dextran; instead, inulin primarily acted as a protective component against premature hydrolysis in the gastric medium. These findings strongly confirm that the targeted action is predominantly governed by the dextran component. The synthesized hydrogels, particularly the dextran-only formulation, therefore show strong potential as effective carriers for colon-targeted drug delivery. The primary objective of this study was to evaluate the feasibility of modified and unmodified dextran and inulin as biodegradable carriers for enzyme-triggered, colon-targeted drug delivery.
Open AccessThe Influence of Synthesis Parameters on the Properties of Dextran-Based Hydrogels for Colon-Targeted Antitumor Drug Delivery Part I: Room Temperature Synthesis of Dextran/Inulin Hydrogels for Colon-Targeted Antitumor Drug Delivery
This research successfully developed novel hydrogels composed of methacrylated dextran and inulin for targeted drug delivery in colorectal cancer therapy. The formulation exploits the natural degradation of both biopolymers by the large intestine’s microflora. A key achievement was the development of a room-temperature free radical polymerization synthesis method. The study thoroughly investigated how varying inulin content (10 and 20 wt%) influenced the hydrogels’ properties. The formulation with 20 wt% inulin exhibited the highest swelling ability at both pH 3 and pH 6, and consequently the lowest elastic modulus, measured by a newly established technique for granulated hydrogels. Using uracil as a model drug, in situ incorporated, confirmed that the greatest drug release occurs in the colorectal region for the neat dextran-based hydrogel, triggered by specific microbial enzymes. Notably, the addition of inulin did not enhance biodegradation-driven drug release in combination with dextran; instead, inulin primarily acted as a protective component against premature hydrolysis in the gastric medium. These findings strongly confirm that the targeted action is predominantly governed by the dextran component. The synthesized hydrogels, particularly the dextran-only formulation, therefore show strong potential as effective carriers for colon-targeted drug delivery. The primary objective of this study was to evaluate the feasibility of modified and unmodified dextran and inulin as biodegradable carriers for enzyme-triggered, colon-targeted drug delivery.
- Open Access
- 24 March 2025
- Published by Elsevier in Carbohydrate Polymer Technologies and Applications
- Vol. 10
Profile and content of fermentable oligo-, di-, monosaccharides, and polyols (FODMAP) compounds in wheat and rye wholegrain foods
- 24 March 2025
- Published by Elsevier in Carbohydrate Polymer Technologies and Applications
- Vol. 10
Open AccessProfile and content of fermentable oligo-, di-, monosaccharides, and polyols (FODMAP) compounds in wheat and rye wholegrain foods
- Open Access
FODMAP Profile of Wholegrain Pasta
Pasta is a staple food consumed worldwide and is made from wholegrain semolina, which is a food rich in dietary fibre, proteins, minerals, vitamins, and bioactive compounds. However, fermentable oligo-, di-, and monosaccharides and polyols (FODMAP), part of soluble dietary fibre in pasta, can trigger/worsen irritable bowel syndrome (IBS) symptoms and increase the prevalence of gastrointestinal disorders. These dietary fibres include lactose, excess fructose relative to glucose, polyols, fructans (mostly fructooligosaccharides), and galactooligosaccharides. Due to a lack of information on the FODMAP profile for pasta, this research conducted a detailed analysis using high-performance anion-exchange chromatography with pulsed amperometric detection to determine the FODMAP compound content in commercially available pasta, with a focus on wholegrain products. The results showed that fructooligosaccharides (FOSs) are the dominant group of FODMAPs, and kestose is the predominant oligosaccharide in all pasta samples both dry (67.1–95.0%) and cooked (27.1–93.9%). Almost all pasta samples are classified as high-FODMAP foods. The degree of reduction in FODMAP compound content during cooking varies between pasta types and is influenced by the wheat type, cooking time, amount of water used for cooking, pasta shapes, and pasta supplementation. In samples of dry pasta, there are statistically significant differences in the results between all samples, while after cooking, there is evident grouping of the results in four clusters. The reduction in FOS content of pasta after cooking was in the range from 30.9% to 84%. Further research should be focused on higher activity of FODMAP degrading enzymes during pasta production process.
Open AccessFODMAP Profile of Wholegrain Pasta
Pasta is a staple food consumed worldwide and is made from wholegrain semolina, which is a food rich in dietary fibre, proteins, minerals, vitamins, and bioactive compounds. However, fermentable oligo-, di-, and monosaccharides and polyols (FODMAP), part of soluble dietary fibre in pasta, can trigger/worsen irritable bowel syndrome (IBS) symptoms and increase the prevalence of gastrointestinal disorders. These dietary fibres include lactose, excess fructose relative to glucose, polyols, fructans (mostly fructooligosaccharides), and galactooligosaccharides. Due to a lack of information on the FODMAP profile for pasta, this research conducted a detailed analysis using high-performance anion-exchange chromatography with pulsed amperometric detection to determine the FODMAP compound content in commercially available pasta, with a focus on wholegrain products. The results showed that fructooligosaccharides (FOSs) are the dominant group of FODMAPs, and kestose is the predominant oligosaccharide in all pasta samples both dry (67.1–95.0%) and cooked (27.1–93.9%). Almost all pasta samples are classified as high-FODMAP foods. The degree of reduction in FODMAP compound content during cooking varies between pasta types and is influenced by the wheat type, cooking time, amount of water used for cooking, pasta shapes, and pasta supplementation. In samples of dry pasta, there are statistically significant differences in the results between all samples, while after cooking, there is evident grouping of the results in four clusters. The reduction in FOS content of pasta after cooking was in the range from 30.9% to 84%. Further research should be focused on higher activity of FODMAP degrading enzymes during pasta production process.