Robert Borkowski
Research Subjects
Research Interests
Robert Borkowski has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
Amitkumar Mahadevan
Nokia Bell Labs
7 shared publicationsRené Bonk
Nokia Bell Labs, Magirusstr. 8, 70469 Stuttgart, Germany
6 shared publicationsVincent Houtsma
Nokia Bell Labs, 600 Mountain Ave, Murray Hill, NJ 07974
6 shared publications- Vincent Houtsma
Nokia Bell Labs
5 shared publications Dora van Veen
Nokia Bell Labs, 600 Mountain Ave, Murray Hill, NJ 07974, USA
4 shared publicationsDoutje van Veen
Nokia Bell Labs, 600 Mountain Ave, Murray Hill, NJ 07974
4 shared publications
Latest Publications
- 9 May 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (8) , C127
Real-time in-service ODN monitoring based on receiver-side DSP for next-generation PONs
Increased delivery of more premium access services over passive optical networks (PONs) has made in-operation optical distribution network monitoring and fault detection a new requirement from operators. In addition to fiber infrastructure monitoring and fault detection, the newly developed monitoring technology can also be used to turn the PON into an intelligent sensing network. Using a PON as a sensing network can provide a range of new sensing applications, which might also result in new business cases for operators. In this paper, we propose to employ digital signal processing on the receiver side, which has become available in the latest standardized 50G PON, as a platform for enabling monitoring and the use of a PON as a sensing network.
- 9 May 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (8) , C127
Real-time in-service ODN monitoring based on receiver-side DSP for next-generation PONs
Increased delivery of more premium access services over passive optical networks (PONs) has made in-operation optical distribution network monitoring and fault detection a new requirement from operators. In addition to fiber infrastructure monitoring and fault detection, the newly developed monitoring technology can also be used to turn the PON into an intelligent sensing network. Using a PON as a sensing network can provide a range of new sensing applications, which might also result in new business cases for operators. In this paper, we propose to employ digital signal processing on the receiver side, which has become available in the latest standardized 50G PON, as a platform for enabling monitoring and the use of a PON as a sensing network.
- 26 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6361-6367
Bismuth-Doped Bidirectional Fiber Amplifier for High-Speed Passive Optical Networks
We experimentally demonstrate a bidirectional, cross-gain-modulation-free, bismuth-doped fiber amplifier (BDFA) for O-band high-speed passive optical networks. Based on the spatially and spectrally resolved gain profiles of the bidirectional BDFA characterized via Rayleigh backscattering measured by a coherent swept wavelength interferometer, an optimization scheme for bidirectonal amplification is introduced. The BDFA is located at the optical line terminal and acts as both a downstream (DS) signal booster and a pre-amplifier for the upstream (US) burst mode signal, with an equal bidirectional saturated gain of 21.3 dB and noise figure of 5.7 dB, which offers 20.8-dB DS and 17-dB US power budget improvement. Our experimental results also indicate that the transient impact of the BDFA is negligible, as it is saturated by the DS signal, resulting in an US power budget penalty of only 0.5 dB in burst mode.
- 26 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6361-6367
Bismuth-Doped Bidirectional Fiber Amplifier for High-Speed Passive Optical Networks
We experimentally demonstrate a bidirectional, cross-gain-modulation-free, bismuth-doped fiber amplifier (BDFA) for O-band high-speed passive optical networks. Based on the spatially and spectrally resolved gain profiles of the bidirectional BDFA characterized via Rayleigh backscattering measured by a coherent swept wavelength interferometer, an optimization scheme for bidirectonal amplification is introduced. The BDFA is located at the optical line terminal and acts as both a downstream (DS) signal booster and a pre-amplifier for the upstream (US) burst mode signal, with an equal bidirectional saturated gain of 21.3 dB and noise figure of 5.7 dB, which offers 20.8-dB DS and 17-dB US power budget improvement. Our experimental results also indicate that the transient impact of the BDFA is negligible, as it is saturated by the DS signal, resulting in an US power budget penalty of only 0.5 dB in burst mode.
- Open Access
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1881-1892
High-Performance SiGe Analog Multiplexer Enabling 176 GBd PAM-8 Transmission
Analog multiplexer (AMUX) integrated circuits (ICs) expand the analog electrical bandwidth of transmitter frontends, enabling signal generation at ultrahigh symbol rates. In this work, we employ a SiGe AMUX which adopts a circuit topology optimized for signal linearity, supporting high-order modulation formats, such as multilevel pulse amplitude modulation (PAM). We discuss in detail the circuit design of the AMUX, including its AMUX core, clock path and output amplifier. We compare two circuit topologies with respect to power consumption, circuit complexity, clock strength and inputto-output linearity. We also perform theoretical analysis of signal impairments induced by misalignments between AMUX inputs to understand their impact on the integrity of the interleaved signal. Using this high-performance SiGe AMUX to drive an optical intensity modulator, we experimentally demonstrate generation and 2 km fiber transmission of different orders of PAM, up to PAM-8 at 176 GBd yielding a net bitrate of 467 Gbit/s.
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1881-1892
Open AccessHigh-Performance SiGe Analog Multiplexer Enabling 176 GBd PAM-8 Transmission
Analog multiplexer (AMUX) integrated circuits (ICs) expand the analog electrical bandwidth of transmitter frontends, enabling signal generation at ultrahigh symbol rates. In this work, we employ a SiGe AMUX which adopts a circuit topology optimized for signal linearity, supporting high-order modulation formats, such as multilevel pulse amplitude modulation (PAM). We discuss in detail the circuit design of the AMUX, including its AMUX core, clock path and output amplifier. We compare two circuit topologies with respect to power consumption, circuit complexity, clock strength and inputto-output linearity. We also perform theoretical analysis of signal impairments induced by misalignments between AMUX inputs to understand their impact on the integrity of the interleaved signal. Using this high-performance SiGe AMUX to drive an optical intensity modulator, we experimentally demonstrate generation and 2 km fiber transmission of different orders of PAM, up to PAM-8 at 176 GBd yielding a net bitrate of 467 Gbit/s.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th4C.5
Burst-Mode Coherent PON Upstream with Rapid Wavelength Measurement and Fast Local Oscillator Tuning Over 20 nm
We demonstrate the first coherent receiver for PON leveraging SiPh wavemeter and hybrid laser capable of measuring bursting wavelengths and fast LO tuning. We successfully receive 100G DP-QPSK bursts from multiple coherent ONUs spanning >20 nm, exceeding 35 dB budget.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th4C.5
Burst-Mode Coherent PON Upstream with Rapid Wavelength Measurement and Fast Local Oscillator Tuning Over 20 nm
We demonstrate the first coherent receiver for PON leveraging SiPh wavemeter and hybrid laser capable of measuring bursting wavelengths and fast LO tuning. We successfully receive 100G DP-QPSK bursts from multiple coherent ONUs spanning >20 nm, exceeding 35 dB budget.
- 1 January 2025
- Published by Optica Publishing Group
- p. W1C.6
Operator Trial of Quadruple PON Coexistence with 100G-PON, 50G-PON, 25GS-PON and XGS-PON
We present North American operator trial involving world’s first simultaneous operation of four PON technologies: 100G-PON, 50G-PON, 25GS-PON and XGS-PON over a field-deployed 11-km-long fiber. We report correct operation of all systems in the trial.
- 1 January 2025
- Published by Optica Publishing Group
- p. W1C.6
Operator Trial of Quadruple PON Coexistence with 100G-PON, 50G-PON, 25GS-PON and XGS-PON
We present North American operator trial involving world’s first simultaneous operation of four PON technologies: 100G-PON, 50G-PON, 25GS-PON and XGS-PON over a field-deployed 11-km-long fiber. We report correct operation of all systems in the trial.
- 4 June 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (7) , C113-C120
Benefits of flexibility in current and future IM-DD based TDM-PON [Invited]
Due to continuously emerging high bandwidth applications, research and standardization of time division multiplexed passive optical networks (TDM-PONs) have focused on increasing the peak bitrate. However, increasing the bitrate while supporting the stringent optical power budget of a PON becomes increasingly challenging because of the larger chromatic dispersion penalties as well as reduced receiver sensitivity when the bitrate of the intensity modulation with direct-detection (IM-DD) based PON is increased. Also, increasing bitrate generally causes higher power consumption, which leads to more challenging thermal designs and misalignment with environmental targets. In this paper we give an overview of flexible concepts that can help achieve the required optical power budget and support reduced power consumption of a future IM-DD based TDM-PON. We demonstrate that a flexible PON can provide an increased overall throughput or an extended reach and power budget with the use of flexible modulation formats, probabilistic and geometric shaping, and flexible rate forward error correction (FEC). Another dimension of flexibility in the form of a configurable optical distribution network (ODN) is described and its merits and challenges are discussed. Flexible concepts based on interleaving of FEC codewords can align signal processing like FEC decoding and the protocol processing closer to the user-rate of an optical network unit (ONU), which leads to reduced power consumption. Flexibility based on multiple channels based on wavelength multiplexing or spatial multiplexing enables optimization of the power consumption to the amount of traffic on the PON. Several flexible concepts have already been adopted in the PON standards. We highlight flexible gain FEC for upstream 50G PON, the transmitter dispersion eye closure (TDEC) metric, and the flexible split-ratio ODN for power saving. Flexible modulation has not been adopted yet in PON standards, but it is expected that flexibility is more and more needed to support the performance, cost effectiveness, and power conservation of future optical access systems.
- 4 June 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (7) , C113-C120
Benefits of flexibility in current and future IM-DD based TDM-PON [Invited]
Due to continuously emerging high bandwidth applications, research and standardization of time division multiplexed passive optical networks (TDM-PONs) have focused on increasing the peak bitrate. However, increasing the bitrate while supporting the stringent optical power budget of a PON becomes increasingly challenging because of the larger chromatic dispersion penalties as well as reduced receiver sensitivity when the bitrate of the intensity modulation with direct-detection (IM-DD) based PON is increased. Also, increasing bitrate generally causes higher power consumption, which leads to more challenging thermal designs and misalignment with environmental targets. In this paper we give an overview of flexible concepts that can help achieve the required optical power budget and support reduced power consumption of a future IM-DD based TDM-PON. We demonstrate that a flexible PON can provide an increased overall throughput or an extended reach and power budget with the use of flexible modulation formats, probabilistic and geometric shaping, and flexible rate forward error correction (FEC). Another dimension of flexibility in the form of a configurable optical distribution network (ODN) is described and its merits and challenges are discussed. Flexible concepts based on interleaving of FEC codewords can align signal processing like FEC decoding and the protocol processing closer to the user-rate of an optical network unit (ONU), which leads to reduced power consumption. Flexibility based on multiple channels based on wavelength multiplexing or spatial multiplexing enables optimization of the power consumption to the amount of traffic on the PON. Several flexible concepts have already been adopted in the PON standards. We highlight flexible gain FEC for upstream 50G PON, the transmitter dispersion eye closure (TDEC) metric, and the flexible split-ratio ODN for power saving. Flexible modulation has not been adopted yet in PON standards, but it is expected that flexibility is more and more needed to support the performance, cost effectiveness, and power conservation of future optical access systems.
- Open Access
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 4038-4047
High-Speed IM/DD Transmission Using Partial Response Signaling With Precoding and Memoryless Decoding
Partial response (PR), or correlative coding techniques, most commonly employed in the form of duobinary or polybinary schemes, can shape signal spectra, thus mitigate performance penalties due to non-ideal channel. In this work, we investigate the advantages of a family of PR encoders of the type (1+ D ) n , which are applied digitally to pulse amplitude modulation (PAM) in a bandwidth-limited intensity modulation and direct detection (IM/DD) system. Precoding is applied to enable memoryless decoding of PR signals based on a multilevel slicer and modulo operation. To quantify the improvements possible with the schemes under study, we simulate the signal-to-noise (SNR) advantage achievable with PR signaling in comparison to PAM for various transmitter and receiver bandwidths. The simulation results show that PR signaling can improve the performance when operating under a bandwidth constraint of approximately 0.44 symbol rate and lower. An experiment involving a high-speed IM/DD transmission is conducted, wherein the performance between different PAM and PR signals is compared. Highest net bitrate is achieved using (1+ D )-PAM-8 signal at 200 GBd, yielding a record net bitrate of 510 Gbit/s for an IM/DD link employing baseband modulation.
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 4038-4047
Open AccessHigh-Speed IM/DD Transmission Using Partial Response Signaling With Precoding and Memoryless Decoding
Partial response (PR), or correlative coding techniques, most commonly employed in the form of duobinary or polybinary schemes, can shape signal spectra, thus mitigate performance penalties due to non-ideal channel. In this work, we investigate the advantages of a family of PR encoders of the type (1+ D ) n , which are applied digitally to pulse amplitude modulation (PAM) in a bandwidth-limited intensity modulation and direct detection (IM/DD) system. Precoding is applied to enable memoryless decoding of PR signals based on a multilevel slicer and modulo operation. To quantify the improvements possible with the schemes under study, we simulate the signal-to-noise (SNR) advantage achievable with PR signaling in comparison to PAM for various transmitter and receiver bandwidths. The simulation results show that PR signaling can improve the performance when operating under a bandwidth constraint of approximately 0.44 symbol rate and lower. An experiment involving a high-speed IM/DD transmission is conducted, wherein the performance between different PAM and PR signals is compared. Highest net bitrate is achieved using (1+ D )-PAM-8 signal at 200 GBd, yielding a record net bitrate of 510 Gbit/s for an IM/DD link employing baseband modulation.
- 12 April 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (7) , C43-C50
ML approaches for OTDR diagnoses in passive optical networks—event detection and classification: ways for ODN branch assignment
An ML-supported diagnostics concept is introduced and demonstrated to detect and classify events on OTDR traces for application on a PON optical distribution network. We can also associate events with ODN branches by using deployment data of the PON. We analyze an ensemble classifier and neural networks, the usage of synthetic OTDR-like traces, and measured data for training. In our proof-of-concept, we show a precision of 98% and recall of 95% using an ensemble classifier on measured OTDR traces and a successful mapping to ODN branches or groups of branches. For emulated data, we achieve an average precision of 70% and an average recall of 91%.
- 12 April 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (7) , C43-C50
ML approaches for OTDR diagnoses in passive optical networks—event detection and classification: ways for ODN branch assignment
An ML-supported diagnostics concept is introduced and demonstrated to detect and classify events on OTDR traces for application on a PON optical distribution network. We can also associate events with ODN branches by using deployment data of the PON. We analyze an ensemble classifier and neural networks, the usage of synthetic OTDR-like traces, and measured data for training. In our proof-of-concept, we show a precision of 98% and recall of 95% using an ensemble classifier on measured OTDR traces and a successful mapping to ODN branches or groups of branches. For emulated data, we achieve an average precision of 70% and an average recall of 91%.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 4096-4102
Dispersion-Tolerant 100 Gb/s Downstream PON With 38 dB Power Budget and Low-Complex Equalization
A 100 Gb/s Intensity Modulated Direct Detection dispersion tolerant downstream PON with 38 dB power budget based on optical duobinary using low-complex equalization is experimentally demonstrated. Optical duobinary transmission using avalanche photodiodes in combination with Electrical Duobinary Detection is shown for the first time. This combination is very tolerant to bandwidth limitations at both the transmitter and the receiver. Results are further improved upon by using a wider bandwidth Semiconductor Optical Amplifier -filter- P-type Intrinsic N-type receiver. Optical duobinary transmission also permits transmission at higher optical powers without incurring a meaningful penalty. The results show the promise of using the Optical Duobinary scheme for future very high speed cost-effective PON systems beyond 50 Gb/s.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 4096-4102
Dispersion-Tolerant 100 Gb/s Downstream PON With 38 dB Power Budget and Low-Complex Equalization
A 100 Gb/s Intensity Modulated Direct Detection dispersion tolerant downstream PON with 38 dB power budget based on optical duobinary using low-complex equalization is experimentally demonstrated. Optical duobinary transmission using avalanche photodiodes in combination with Electrical Duobinary Detection is shown for the first time. This combination is very tolerant to bandwidth limitations at both the transmitter and the receiver. Results are further improved upon by using a wider bandwidth Semiconductor Optical Amplifier -filter- P-type Intrinsic N-type receiver. Optical duobinary transmission also permits transmission at higher optical powers without incurring a meaningful penalty. The results show the promise of using the Optical Duobinary scheme for future very high speed cost-effective PON systems beyond 50 Gb/s.
- 1 January 2024
- Published by Optica Publishing Group
- p. Th1E.5
200G IM/DD Time-and-Polarization-Division-Multiplexed PON with >29dB Power Budget Using Boosted EML and APDs
We experimentally show feasibility of downstream 200 Gbit/s IM/DD TPDM PON system with >4 dB margin to 29 dB optical power budget based on two 100 Gbit/s polarization channels in a single wavelength window. The system uses SBS suppression to mitigate nonlinear fiber loss and duoternary modulation to overcome bandwidth limitation.
- 1 January 2024
- Published by Optica Publishing Group
- p. Th1E.5
200G IM/DD Time-and-Polarization-Division-Multiplexed PON with >29dB Power Budget Using Boosted EML and APDs
We experimentally show feasibility of downstream 200 Gbit/s IM/DD TPDM PON system with >4 dB margin to 29 dB optical power budget based on two 100 Gbit/s polarization channels in a single wavelength window. The system uses SBS suppression to mitigate nonlinear fiber loss and duoternary modulation to overcome bandwidth limitation.