Egidio Di Gialleonardo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Egidio Di Gialleonardo has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Stefano Bruni
Politecnico di Milano
22 shared publications - Roberto Corradi
Politecnico di Milano
9 shared publications - Alan Facchinetti
Department of Mechanical Engineering, Politecnico di Milano, Milan, Italy
8 shared publications - Binbin Liu
Politecnico di Milano
7 shared publications - Leonardo Faccini
Politecnico di Milano
6 shared publications - Stefano Melzi
Politecnico di Milano
6 shared publications
Latest Publications
- 17 November 2026
- Published by Springer Nature
- p. 197-206
Estimation of the Local Stiffness Between Derailed Railway Axles and Containment Structures for Multibody Post-derailment Simulations
- 17 November 2026
- Published by Springer Nature
- p. 197-206
Estimation of the Local Stiffness Between Derailed Railway Axles and Containment Structures for Multibody Post-derailment Simulations
- 7 November 2026
- Published by Springer Nature
- p. 74-83
Investigating the Role of Bogie Architecture in Tramcar Curve Squeal
- 7 November 2026
- Published by Springer Nature
- p. 74-83
Investigating the Role of Bogie Architecture in Tramcar Curve Squeal
- 7 November 2026
- Published by Springer Nature
- p. 336-345
Hardware-in-the-Loop Test Rig to Assess the Influence of Secondary Dampers on Hunting Motions of Rail Vehicles
- 7 November 2026
- Published by Springer Nature
- p. 336-345
Hardware-in-the-Loop Test Rig to Assess the Influence of Secondary Dampers on Hunting Motions of Rail Vehicles
- Open Access
- 10 May 2026
- Published by Elsevier in Advances in Engineering Software
- Vol. 219
An approach based on a single bogie-mounted sensor for estimating track vertical irregularity from in-service railway vehicles
- 10 May 2026
- Published by Elsevier in Advances in Engineering Software
- Vol. 219
Open AccessAn approach based on a single bogie-mounted sensor for estimating track vertical irregularity from in-service railway vehicles
- Open Access
- 20 November 2025
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 625
Frequency and time domain prediction of railway curve squeal including multiple wheel/rail contact points
- 20 November 2025
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 625
Open AccessFrequency and time domain prediction of railway curve squeal including multiple wheel/rail contact points
- Open Access
- 22 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11332
Identification of Railway Vertical Track Alignment via the Unknown Input Observer
In this paper, a model-based approach for the identification of the railway vertical track alignment from simulation data is presented. The proposed methodology is based on the application of the unknown input observer algorithm. The model of a conventional train is used to simulate the acceleration levels that vehicle-mounted sensors (e.g., on the bogies and carbody) would measure during operation. Simulations are carried out at a constant speed on both straight and curved tracks, including different types of track geometry components (namely longitudinal level, alignment, and cross-level) to assess the algorithm capability to identify the input irregularity. The primary focus is on the identification of mean vertical track alignment, a critical irregularity component for safety issues. In the analysed cases, the comparison between the measured and reconstructed signal histories are quite satisfactory, with maximum errors in the order of 15% and 29% along straight and curved tracks. Comparing the frequency content of the signals, a significantly higher degree of accuracy is observed (with maximum errors of 5–10% depending on the track layout), which demonstrates that the proposed methodology is suitable for track irregularity identification and monitoring purposes using an instrumented vehicle.
- 22 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11332
Open AccessIdentification of Railway Vertical Track Alignment via the Unknown Input Observer
In this paper, a model-based approach for the identification of the railway vertical track alignment from simulation data is presented. The proposed methodology is based on the application of the unknown input observer algorithm. The model of a conventional train is used to simulate the acceleration levels that vehicle-mounted sensors (e.g., on the bogies and carbody) would measure during operation. Simulations are carried out at a constant speed on both straight and curved tracks, including different types of track geometry components (namely longitudinal level, alignment, and cross-level) to assess the algorithm capability to identify the input irregularity. The primary focus is on the identification of mean vertical track alignment, a critical irregularity component for safety issues. In the analysed cases, the comparison between the measured and reconstructed signal histories are quite satisfactory, with maximum errors in the order of 15% and 29% along straight and curved tracks. Comparing the frequency content of the signals, a significantly higher degree of accuracy is observed (with maximum errors of 5–10% depending on the track layout), which demonstrates that the proposed methodology is suitable for track irregularity identification and monitoring purposes using an instrumented vehicle.
- 1 July 2025
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 14 (3) , 613-632
Non-Hertzian wheel-rail contact modelling for real-time simulation: a case study in hardware-in-the-loop test
- 1 July 2025
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 14 (3) , 613-632
Non-Hertzian wheel-rail contact modelling for real-time simulation: a case study in hardware-in-the-loop test
- 29 November 2024
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 13 (5) , 988-1005
Curve squeal of modern tramcars: comparison between independently rotating wheels and solid axles
- 29 November 2024
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 13 (5) , 988-1005
Curve squeal of modern tramcars: comparison between independently rotating wheels and solid axles
- 1 November 2024
- Published by Springer Nature
- p. 535-545
Dynamics and Control of MR Damper in Railway Vehicle Semi-active Primary Suspension
- 1 November 2024
- Published by Springer Nature
- p. 535-545
Dynamics and Control of MR Damper in Railway Vehicle Semi-active Primary Suspension
- 1 November 2024
- Published by Springer Nature
- p. 1200-1208
A Speed-Dependent Condition Monitoring System for Track Geometry Estimation Using Inertial Measurements
- 1 November 2024
- Published by Springer Nature
- p. 1200-1208
A Speed-Dependent Condition Monitoring System for Track Geometry Estimation Using Inertial Measurements