Daoud Burghal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daoud Burghal has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Andreas F. Molisch
University of Southern California, Los Angeles, CA, USA
8 shared publications - Michael R. Neuman
University of Southern California in Los Angeles, CA, USA
2 shared publications - Yeqing Hu
Samsung Research America, Plano, TX, USA
2 shared publications - Abdullah Alghafis
King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
1 shared publication Andreas F. Molisch
Samsung Research America, Richardson, TX, USA
1 shared publicationArash Saber Tehrani
Ming Hsieh Department of Electrical Engineering, University of Southern California, Los Angeles, CA, USA
1 shared publication
Latest Publications
- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 7608-7622
Context-Conditioned Spatio-Temporal Predictive Learning for Reliable V2V Channel Prediction
Achieving reliable multidimensional Vehicle-to-Vehicle (V2V) channel state information (CSI) prediction is both challenging and crucial for optimizing downstream tasks that depend on instantaneous CSI. This work extends traditional prediction approaches by focusing on four-dimensional (4D) CSI, which includes predictions over time, bandwidth, and antenna (TX and RX) space. Such a comprehensive framework is essential for addressing the dynamic nature of mobility environments within intelligent transportation systems, necessitating the capture of both temporal and spatial dependencies across diverse domains. To address this complexity, we propose a novel context-conditioned spatiotemporal predictive learning method. This method leverages causal convolutional long short-term memory (CA-ConvLSTM) to effectively capture dependencies within 4D CSI data, and incorporates context-conditioned attention mechanisms to enhance the efficiency of spatiotemporal memory updates. Additionally, we introduce an adaptive meta-learning scheme tailored for recurrent networks to mitigate the issue of accumulative prediction errors. We validate the proposed method through empirical studies conducted across three different geometric configurations and mobility scenarios. Our results demonstrate that the proposed approach outperforms existing state-of-the-art predictive models, achieving superior performance across various geometries. Moreover, we show that the meta-learning framework significantly enhances the performance of recurrent-based predictive models in highly challenging cross-geometry settings, thus highlighting its robustness and adaptability.
- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 7608-7622
Context-Conditioned Spatio-Temporal Predictive Learning for Reliable V2V Channel Prediction
Achieving reliable multidimensional Vehicle-to-Vehicle (V2V) channel state information (CSI) prediction is both challenging and crucial for optimizing downstream tasks that depend on instantaneous CSI. This work extends traditional prediction approaches by focusing on four-dimensional (4D) CSI, which includes predictions over time, bandwidth, and antenna (TX and RX) space. Such a comprehensive framework is essential for addressing the dynamic nature of mobility environments within intelligent transportation systems, necessitating the capture of both temporal and spatial dependencies across diverse domains. To address this complexity, we propose a novel context-conditioned spatiotemporal predictive learning method. This method leverages causal convolutional long short-term memory (CA-ConvLSTM) to effectively capture dependencies within 4D CSI data, and incorporates context-conditioned attention mechanisms to enhance the efficiency of spatiotemporal memory updates. Additionally, we introduce an adaptive meta-learning scheme tailored for recurrent networks to mitigate the issue of accumulative prediction errors. We validate the proposed method through empirical studies conducted across three different geometric configurations and mobility scenarios. Our results demonstrate that the proposed approach outperforms existing state-of-the-art predictive models, achieving superior performance across various geometries. Moreover, we show that the meta-learning framework significantly enhances the performance of recurrent-based predictive models in highly challenging cross-geometry settings, thus highlighting its robustness and adaptability.
- Open Access
- 4 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 22-28
Sim2Field: End-to-End Development of AI RANs for 6G
- 4 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 22-28
Open AccessSim2Field: End-to-End Development of AI RANs for 6G
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (12) , 9811-9825
Wireless Channel Aware Data Augmentation Methods for Deep Learning-Based Indoor Localization
Indoor localization is a challenging problem that - unlike outdoor localization - lacks a universal and robust solution. Machine Learning (ML), particularly Deep Learning (DL), methods have been investigated as a promising approach. Although such methods bring remarkable localization accuracy, they heavily depend on the training data collected from the environment. The data collection is usually a laborious and time-consuming task, but Data Augmentation (DA) can be used to alleviate this issue. In this paper, different from previously used DA, we propose methods that utilize the domain knowledge about wireless propagation channels and devices. The methods exploit the typical hardware component drift in the transceivers and/or the statistical behavior of the channel, in combination with the measured Power Delay Profile (PDP). We comprehensively evaluate the proposed methods to demonstrate their effectiveness. This investigation mainly focuses on the impact of factors such as the number of measurements, augmentation proportion, and the environment of interest impact the effectiveness of the different DA methods. We show that in the low-data regime (few actual measurements available), localization accuracy increases up to 50%, matching non-augmented results in the high-data regime. In addition, the proposed methods may outperform the measurement-only highdata performance by up to 33% using only 1/4 of the amount of measured data. We also exhibit the effect of different training data distribution and quality on the effectiveness of DA. Finally, we demonstrate the power of the proposed methods when employed along with Transfer Learning (TL) to address the data scarcity in target and/or source environments.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (12) , 9811-9825
Wireless Channel Aware Data Augmentation Methods for Deep Learning-Based Indoor Localization
Indoor localization is a challenging problem that - unlike outdoor localization - lacks a universal and robust solution. Machine Learning (ML), particularly Deep Learning (DL), methods have been investigated as a promising approach. Although such methods bring remarkable localization accuracy, they heavily depend on the training data collected from the environment. The data collection is usually a laborious and time-consuming task, but Data Augmentation (DA) can be used to alleviate this issue. In this paper, different from previously used DA, we propose methods that utilize the domain knowledge about wireless propagation channels and devices. The methods exploit the typical hardware component drift in the transceivers and/or the statistical behavior of the channel, in combination with the measured Power Delay Profile (PDP). We comprehensively evaluate the proposed methods to demonstrate their effectiveness. This investigation mainly focuses on the impact of factors such as the number of measurements, augmentation proportion, and the environment of interest impact the effectiveness of the different DA methods. We show that in the low-data regime (few actual measurements available), localization accuracy increases up to 50%, matching non-augmented results in the high-data regime. In addition, the proposed methods may outperform the measurement-only highdata performance by up to 33% using only 1/4 of the amount of measured data. We also exhibit the effect of different training data distribution and quality on the effectiveness of DA. Finally, we demonstrate the power of the proposed methods when employed along with Transfer Learning (TL) to address the data scarcity in target and/or source environments.
- Open Access
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 4840-4853
Impact of Channel and System Parameters on Performance Evaluation of Frequency Extrapolation Using Machine Learning
Channel extrapolation in the frequency domain is an important tool for reducing overhead and latency in frequency division duplex (FDD) wireless communications systems. Over the past years, various machine learning (ML) techniques have been proposed for this goal, but their effectiveness is usually evaluated only for a limited number of examples. This paper presents an extensive investigation of the impact of various parameters, both of the system and of the underlying channels, on the performance of three types of ML algorithms, namely K-nearest neighbor (KNN), convolutional multilayer perceptron (CNN/MLP), and autoencoder structures (AE). We analyze the impact of channel coherence bandwidth and coherence distance, and the number of multipath components, as well as system bandwidth, number of subcarriers, duplex distance, and signal-to-noise ratio (SNR) in uplink and downlink. We also consider both complex and magnitude normalized mean-square error (NMSE) as training and evaluation metrics. Physical interpretations of the obtained results are given. Most importantly, we find that the NMSE can vary by 10 dB or more over physically reasonable ranges of parameters but often shows saturation behavior over part of those ranges. We also find that, in particular, KNN results can be quantitatively and qualitatively different from CNN/MLP and AE. These investigations thus provide insights into meaningful parameter choices for the performance evaluation of new ML algorithms for frequency-domain channel extrapolation.
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 4840-4853
Open AccessImpact of Channel and System Parameters on Performance Evaluation of Frequency Extrapolation Using Machine Learning
Channel extrapolation in the frequency domain is an important tool for reducing overhead and latency in frequency division duplex (FDD) wireless communications systems. Over the past years, various machine learning (ML) techniques have been proposed for this goal, but their effectiveness is usually evaluated only for a limited number of examples. This paper presents an extensive investigation of the impact of various parameters, both of the system and of the underlying channels, on the performance of three types of ML algorithms, namely K-nearest neighbor (KNN), convolutional multilayer perceptron (CNN/MLP), and autoencoder structures (AE). We analyze the impact of channel coherence bandwidth and coherence distance, and the number of multipath components, as well as system bandwidth, number of subcarriers, duplex distance, and signal-to-noise ratio (SNR) in uplink and downlink. We also consider both complex and magnitude normalized mean-square error (NMSE) as training and evaluation metrics. Physical interpretations of the obtained results are given. Most importantly, we find that the NMSE can vary by 10 dB or more over physically reasonable ranges of parameters but often shows saturation behavior over part of those ranges. We also find that, in particular, KNN results can be quantitatively and qualitatively different from CNN/MLP and AE. These investigations thus provide insights into meaningful parameter choices for the performance evaluation of new ML algorithms for frequency-domain channel extrapolation.
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (7) , 2145-2149
Estimation of Isotropic Pathloss From Directional Channel Measurements in Azimuth and Elevation
Path-Loss is one of the essential characteristics of wireless propagation channels. It is usually captured from channel measurements with (quasi-) isotropic antennas. To characterize the wireless channels at high frequencies, beamforming or directional antennas are commonly used, in which case a method for estimating the isotropic path-loss is needed. The method should account for the possible spatial overlap of the different directional measurements while including the received signal from all the multipath components (MPCs) in the channel. In this letter, we propose an efficient method that uses a weighted sum of the powers received from the directional measurements. The weights can be calculated using matrix inversion. We verify the solution using synthetic data and demonstrate the usage with measurements at sub-THz frequencies.
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (7) , 2145-2149
Estimation of Isotropic Pathloss From Directional Channel Measurements in Azimuth and Elevation
Path-Loss is one of the essential characteristics of wireless propagation channels. It is usually captured from channel measurements with (quasi-) isotropic antennas. To characterize the wireless channels at high frequencies, beamforming or directional antennas are commonly used, in which case a method for estimating the isotropic path-loss is needed. The method should account for the possible spatial overlap of the different directional measurements while including the received signal from all the multipath components (MPCs) in the channel. In this letter, we propose an efficient method that uses a weighted sum of the powers received from the directional measurements. The weights can be calculated using matrix inversion. We verify the solution using synthetic data and demonstrate the usage with measurements at sub-THz frequencies.
- Open Access
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 117810-117825
Enhanced AI-Based CSI Prediction Solutions for Massive MIMO in 5G and 6G Systems
Accurate Channel State Information (CSI) is critical for maximizing the throughput of massive Multi-Input Multi-Output (mMIMO) systems. Due to the environment dynamics and user mobility, CSI aging is a major challenge to achieving the large throughput of mMIMO promised by theory. CSI prediction can be used to overcome this without increasing the signaling overhead. Motivated by the anticipated native support for Artificial Intelligence (AI) in the fifth generation and beyond cellular standards, we propose deep learning CSI prediction solutions based on 3-Dimensional (3D) Complex Convolutional Neural Networks (CCNN). These solutions provide improved capabilities for capturing temporal and spatial correlations, enhancing CSI prediction performance. In particular, they utilize the angle delay decomposition of previously observed CSI to predict the future one. In one architecture, the network, dubbed CSI Prediction Network (CSI-PNet), uses small kernels with circular padding to efficiently capture the correlation between propagation paths in the angle domain. This architecture can be further improved by the use of an attention-like model to vary the weights and enhance prediction performance adaptively. We also propose methods to enhance robustness to noise and time and frequency offsets. We tested these solutions using 3GPP-compatible simulations and field measurements in a commercial network. Our solutions demonstrate stable performance and significantly outperform several benchmarks, especially at low and medium speeds. They strike a balance between performance and architecture complexity, indicating suitability for actual implementation.
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 117810-117825
Open AccessEnhanced AI-Based CSI Prediction Solutions for Massive MIMO in 5G and 6G Systems
Accurate Channel State Information (CSI) is critical for maximizing the throughput of massive Multi-Input Multi-Output (mMIMO) systems. Due to the environment dynamics and user mobility, CSI aging is a major challenge to achieving the large throughput of mMIMO promised by theory. CSI prediction can be used to overcome this without increasing the signaling overhead. Motivated by the anticipated native support for Artificial Intelligence (AI) in the fifth generation and beyond cellular standards, we propose deep learning CSI prediction solutions based on 3-Dimensional (3D) Complex Convolutional Neural Networks (CCNN). These solutions provide improved capabilities for capturing temporal and spatial correlations, enhancing CSI prediction performance. In particular, they utilize the angle delay decomposition of previously observed CSI to predict the future one. In one architecture, the network, dubbed CSI Prediction Network (CSI-PNet), uses small kernels with circular padding to efficiently capture the correlation between propagation paths in the angle domain. This architecture can be further improved by the use of an attention-like model to vary the weights and enhance prediction performance adaptively. We also propose methods to enhance robustness to noise and time and frequency offsets. We tested these solutions using 3GPP-compatible simulations and field measurements in a commercial network. Our solutions demonstrate stable performance and significantly outperform several benchmarks, especially at low and medium speeds. They strike a balance between performance and architecture complexity, indicating suitability for actual implementation.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (9) , 7550-7565
Supervised ML Solution for Band Assignment in Dual-Band Systems With Omnidirectional and Directional Antennas
Many wireless networks, including 5G NR (New Radio) and future beyond 5G cellular systems, are expected to operate on multiple frequency bands. This paper considers the band assignment (BA) problem in dual-band systems, where the basestation (BS) chooses one of the two available frequency bands (centimeter-wave and millimeter-wave bands) to communicate with the user equipment (UE). While the millimeter-wave band might offer higher data rate, there is a significant probability of outage during which the communication should be carried on the (more reliable) centimeter-wave band. With mobility, the BA can be perceived as a sequential problem, where the BS uses previously observed information to predict the best band for a future time step. We formulate the BA as a binary classification problem and propose supervised Machine Learning (ML) solutions. We study the problem when both the BS and the UE use (i) omnidirectional antennas and (ii) both use directional antennas. In the omnidirectional case, we derive analytical benchmark solutions based on the Gaussian Process (GP) assumption for the inter-band shadow fading. In the directional case, where the labeling is shown to be complex, we propose an efficient labeling approach based on the Viterbi Algorithm (VA). We compare the performances for two channel models: (i) a stochastic channel and (ii) a ray-tracing based channel.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (9) , 7550-7565
Supervised ML Solution for Band Assignment in Dual-Band Systems With Omnidirectional and Directional Antennas
Many wireless networks, including 5G NR (New Radio) and future beyond 5G cellular systems, are expected to operate on multiple frequency bands. This paper considers the band assignment (BA) problem in dual-band systems, where the basestation (BS) chooses one of the two available frequency bands (centimeter-wave and millimeter-wave bands) to communicate with the user equipment (UE). While the millimeter-wave band might offer higher data rate, there is a significant probability of outage during which the communication should be carried on the (more reliable) centimeter-wave band. With mobility, the BA can be perceived as a sequential problem, where the BS uses previously observed information to predict the best band for a future time step. We formulate the BA as a binary classification problem and propose supervised Machine Learning (ML) solutions. We study the problem when both the BS and the UE use (i) omnidirectional antennas and (ii) both use directional antennas. In the omnidirectional case, we derive analytical benchmark solutions based on the Gaussian Process (GP) assumption for the inter-band shadow fading. In the directional case, where the labeling is shown to be complex, we propose an efficient labeling approach based on the Viterbi Algorithm (VA). We compare the performances for two channel models: (i) a stochastic channel and (ii) a ray-tracing based channel.
- Open Access
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
System Performance Assessment in Dual-Band Device-to-Device MIMO Channels
Device-to-Device (D2D) communications has been embraced as a novel approach for extending coverage in fifth-generation (5G and beyond) wireless networks. Throughput and reliability assessment of such wireless networks are therefore of utmost importance for D2D communication systems design. In this paper, we consider the capacity results of wireless propagation channels in two 5G modes namely the sub-6 GHz centimeter-wave (cm-wave) and 60 GHz millimeter-wave (mm-wave) bands for a multiple-input-multiple-output (MIMO) D2D fading channel. Results presented in this paper were obtained from propagation channel measurements jointly conducted in both cm-wave (2-6 GHz) and mm-wave (59-63 GHz) bands using an 8 × 8 MIMO virtual array setup in an outdoor environment. These measurements were conducted at the exact same locations (with constituents unchanged) in both cm-wave and mm-wave bands for comparability of results. Capacity values were computed using two power policies (with and without channel state information (CSI)). We also investigated the eigenmode spectral structure to understand the spatial correlatedness of the channel and the Rician K-factor to analyze small-scale fading in the channel. The results presented in this paper can be used by wireless systems designer for assessing the performance of D2D systems operating in the cm-wave and/or mm-wave bands for this type of environment.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessSystem Performance Assessment in Dual-Band Device-to-Device MIMO Channels
Device-to-Device (D2D) communications has been embraced as a novel approach for extending coverage in fifth-generation (5G and beyond) wireless networks. Throughput and reliability assessment of such wireless networks are therefore of utmost importance for D2D communication systems design. In this paper, we consider the capacity results of wireless propagation channels in two 5G modes namely the sub-6 GHz centimeter-wave (cm-wave) and 60 GHz millimeter-wave (mm-wave) bands for a multiple-input-multiple-output (MIMO) D2D fading channel. Results presented in this paper were obtained from propagation channel measurements jointly conducted in both cm-wave (2-6 GHz) and mm-wave (59-63 GHz) bands using an 8 × 8 MIMO virtual array setup in an outdoor environment. These measurements were conducted at the exact same locations (with constituents unchanged) in both cm-wave and mm-wave bands for comparability of results. Capacity values were computed using two power policies (with and without channel state information (CSI)). We also investigated the eigenmode spectral structure to understand the spatial correlatedness of the channel and the Rician K-factor to analyze small-scale fading in the channel. The results presented in this paper can be used by wireless systems designer for assessing the performance of D2D systems operating in the cm-wave and/or mm-wave bands for this type of environment.
- 8 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 7 (5) , 872-875
Rate and Outage Probability in Dual Band Systems With Prediction-Based Band Switching
5G cellular systems will have the ability to communicate in either centimeter-wave or millimeter-wave bands, though not necessarily in both bands simultaneously. Therefore, techniques to optimize switching between those bands are needed. In this letter, we propose a suitable scheme based on rate prediction. Specifically, in each time-frame the base-station predicts the state of large-scale fading for the next time-frame; data transmission is then carried over the band that is anticipated to achieve the larger data rate. We analyze the scheme based on the assumption that large-scale fading is lognormally distributed and with a finite correlation between the two bands.
- 8 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 7 (5) , 872-875
Rate and Outage Probability in Dual Band Systems With Prediction-Based Band Switching
5G cellular systems will have the ability to communicate in either centimeter-wave or millimeter-wave bands, though not necessarily in both bands simultaneously. Therefore, techniques to optimize switching between those bands are needed. In this letter, we propose a suitable scheme based on rate prediction. Specifically, in each time-frame the base-station predicts the state of large-scale fading for the next time-frame; data transmission is then carried over the band that is anticipated to achieve the larger data rate. We analyze the scheme based on the assumption that large-scale fading is lognormally distributed and with a finite correlation between the two bands.
- Open Access
- 27 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 17 (1) , 339-351
On Expected Neighbor Discovery Time With Prior Information: Modeling, Bounds and Optimization
Neighbor discovery (ND) is an essential prerequisite for any peer-to-peer communication. In general, minimizing the discovery time is the goal for ND schemes. In this paper, we study the average discovery time for directional random ND when nodes have prior information about their set of possible neighbors, which also helps identify the performance limits of random ND schemes. Typically, discovery time analysis is done for assumptions that simplify the network structure, such as uniform neighbor relations for all nodes. However, with prior information the directional transmission probabilities depend on the node and the direction. This complicates the analysis of the expected discovery time. We first provide a closed-form expression for the expected discovery time based on the non-uniform coupon collector problem. Next, we identify directional transmission probabilities of each node that achieve a small discovery time. Due to the mathematical complexity, we provide a lower and an upper bound on the expected discovery time, which allows us to write the problem as a convex optimization problem. Through simulations, we demonstrate the performance gain due to prior knowledge with the proposed methods as compared with when no prior information is available, as well as the impact of uncertainty in the prior knowledge.
- 27 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 17 (1) , 339-351
Open AccessOn Expected Neighbor Discovery Time With Prior Information: Modeling, Bounds and Optimization
Neighbor discovery (ND) is an essential prerequisite for any peer-to-peer communication. In general, minimizing the discovery time is the goal for ND schemes. In this paper, we study the average discovery time for directional random ND when nodes have prior information about their set of possible neighbors, which also helps identify the performance limits of random ND schemes. Typically, discovery time analysis is done for assumptions that simplify the network structure, such as uniform neighbor relations for all nodes. However, with prior information the directional transmission probabilities depend on the node and the direction. This complicates the analysis of the expected discovery time. We first provide a closed-form expression for the expected discovery time based on the non-uniform coupon collector problem. Next, we identify directional transmission probabilities of each node that achieve a small discovery time. Due to the mathematical complexity, we provide a lower and an upper bound on the expected discovery time, which allows us to write the problem as a convex optimization problem. Through simulations, we demonstrate the performance gain due to prior knowledge with the proposed methods as compared with when no prior information is available, as well as the impact of uncertainty in the prior knowledge.