Dalsung Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dalsung Yoon has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Seungwoo Paek
4 shared publications- Chang Hwa Lee
Korea Atomic Energy Research Institute, Daejeon, Republic of Korea
3 shared publications Chang Hwa Lee
2 shared publicationsSupathorn Phongikaroon
Virginia Commonwealth University
2 shared publicationsChanghwa Lee
Korea Atomic Energy Research Institute, Daejeon, South Korea
1 shared publicationDong Jun Shin
Advanced Fuel Cycle Technology Development Division Korea Atomic Energy Research Institute 111 Daedeok-daero 989 beon-gil Yuseong-gu Daejeon 34057 Republic of Korea kaeri.re.kr
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Corrosion Behavior of Candidate Structural Materials for Molten Salt Reactors in Flowing NaCl‐MgCl2
Abstracts. A high‐temperature molten salt natural convection loop was designed and manufactured for chloride‐based salts. NaCl‐MgCl2 salt was prepared and injected into the loop. Corrosion coupons composed of SS304, SS316L, and high‐Ni alloys were also prepared as candidate structural materials for molten chloride salt reactors. After a corrosion experiment was conducted for 500 h, the salt was drained from the loop to the drain tank; inductively coupled plasma optical emission spectroscopy was used to investigate metal dissolution from the materials into the salt. The corroded materials were analyzed using scanning electron microscopy and energy‐dispersive X‐ray spectroscopy to calculate the corrosion rate. Materials exposed to NaCl‐MgCl2 molten salt showed varying levels of corrosion resistance. The high‐Ni alloy demonstrated the highest resistance, followed by SS316L and SS304. Furthermore, corrosion products were observed to migrate along the molten salt through natural convection, eventually depositing onto the surface of the high‐Ni alloy in the cold leg of the loop.
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Open AccessCorrosion Behavior of Candidate Structural Materials for Molten Salt Reactors in Flowing NaCl‐MgCl2
Abstracts. A high‐temperature molten salt natural convection loop was designed and manufactured for chloride‐based salts. NaCl‐MgCl2 salt was prepared and injected into the loop. Corrosion coupons composed of SS304, SS316L, and high‐Ni alloys were also prepared as candidate structural materials for molten chloride salt reactors. After a corrosion experiment was conducted for 500 h, the salt was drained from the loop to the drain tank; inductively coupled plasma optical emission spectroscopy was used to investigate metal dissolution from the materials into the salt. The corroded materials were analyzed using scanning electron microscopy and energy‐dispersive X‐ray spectroscopy to calculate the corrosion rate. Materials exposed to NaCl‐MgCl2 molten salt showed varying levels of corrosion resistance. The high‐Ni alloy demonstrated the highest resistance, followed by SS316L and SS304. Furthermore, corrosion products were observed to migrate along the molten salt through natural convection, eventually depositing onto the surface of the high‐Ni alloy in the cold leg of the loop.
- Open Access
- 14 December 2023
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (3) , 1013-1021
Rare earth removal from pyroprocessing fuel product for preparing MSR fuel
- 14 December 2023
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (3) , 1013-1021
Open AccessRare earth removal from pyroprocessing fuel product for preparing MSR fuel
- 30 June 2022
- Published by The Korean Radioactive Waste Society in Journal of Nuclear Fuel Cycle and Waste Technology
- Vol. 20 (2) , 193-207
Chlorination of TRU/RE/SrOx in Oxide Spent Nuclear Fuel Using Ammonium Chloride as a Chlorinating Agent
- 30 June 2022
- Published by The Korean Radioactive Waste Society in Journal of Nuclear Fuel Cycle and Waste Technology
- Vol. 20 (2) , 193-207
Chlorination of TRU/RE/SrOx in Oxide Spent Nuclear Fuel Using Ammonium Chloride as a Chlorinating Agent
- 30 June 2022
- Published by Korean Physical Society
- Vol. 31 (6) , 17-22
Change of Thinking, Molten Salt Reactor (MSR)
A loss of coolant in a nuclear power plant using solid nuclear fuel can cause a severe nuclear accident, surpassing a design-basis accident, and may include a meltdown and subsequent steam and hydrogen explosion leading to a major release of radioactive material to the environment. A molten salt reactor (MSR), one of the six concepts for a Generation-IV non-pressurized water reactor, utilizes liquid fuel in which the coolant and nuclear fuel are integrated. The integration of the fuel and coolant is fundamentally safe from severe accidents caused by a loss of coolant. Because an MSR operates at atmospheric pressure and high temperature compared to pressurized water reactors, the reactor structure is simple and thermal efficiency is excellent. An MSR can be deployed at any scale from a small micro-reactor to a large commercial nuclear power plant. At a time when the role of nuclear power is growing dramatically more significant for achieving “2050 Carbon Neutrality”, the MSR technology draws attention due to its superior safety and efficiency as well as an expectation that can resolve the spent nuclear fuel issue. This article briefly introduces the characteristics and the R&D status of MSRs.
- 30 June 2022
- Published by Korean Physical Society
- Vol. 31 (6) , 17-22
Change of Thinking, Molten Salt Reactor (MSR)
A loss of coolant in a nuclear power plant using solid nuclear fuel can cause a severe nuclear accident, surpassing a design-basis accident, and may include a meltdown and subsequent steam and hydrogen explosion leading to a major release of radioactive material to the environment. A molten salt reactor (MSR), one of the six concepts for a Generation-IV non-pressurized water reactor, utilizes liquid fuel in which the coolant and nuclear fuel are integrated. The integration of the fuel and coolant is fundamentally safe from severe accidents caused by a loss of coolant. Because an MSR operates at atmospheric pressure and high temperature compared to pressurized water reactors, the reactor structure is simple and thermal efficiency is excellent. An MSR can be deployed at any scale from a small micro-reactor to a large commercial nuclear power plant. At a time when the role of nuclear power is growing dramatically more significant for achieving “2050 Carbon Neutrality”, the MSR technology draws attention due to its superior safety and efficiency as well as an expectation that can resolve the spent nuclear fuel issue. This article briefly introduces the characteristics and the R&D status of MSRs.
- 12 April 2022
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 331 (5) , 2209-2216
Chlorination of uranium metal to uranium trichloride using ammonium chloride
- 12 April 2022
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 331 (5) , 2209-2216
Chlorination of uranium metal to uranium trichloride using ammonium chloride
- Open Access
- 28 October 2021
- Published by Wiley in Science and Technology of Nuclear Installations
- Vol. 2021, 1-6
Electrochemical Deposition of U and RE Elements Using the Stirred Liquid Cadmium Cathode in LiCl-KCl Molten Salts
This study was conducted in an attempt to understand the effect of a stirred liquid cadmium cathode (LCC) on the electrodeposition of U and U/RE on Cd. For this purpose, a series of electrowinning tests were performed using an LCC equipped with a Cd stirrer. Initially, three runs of the U electrodeposition tests were conducted using LiCl-KCl-UCl3 at 500°C under a constant current. From the results obtained from the initial three runs, it was found that the maximum deposited amount of U was 7.4 wt U/Cd. U dendrite formation on the LCC crucible was not observed across each of the three runs. Three additional runs were conducted using LiCl-KCl-UCl3-RECl3 to determine the extent of U/RE electrodeposition. The maximum number of moles of U+RE metals deposited was 0.07, a value estimated to be 2.14 times higher than the solubility limits exhibited by these metals in Cd. The results of this study show that the use of a Cd stirrer significantly improves the extent of U deposition.
- 28 October 2021
- Published by Wiley in Science and Technology of Nuclear Installations
- Vol. 2021, 1-6
Open AccessElectrochemical Deposition of U and RE Elements Using the Stirred Liquid Cadmium Cathode in LiCl-KCl Molten Salts
This study was conducted in an attempt to understand the effect of a stirred liquid cadmium cathode (LCC) on the electrodeposition of U and U/RE on Cd. For this purpose, a series of electrowinning tests were performed using an LCC equipped with a Cd stirrer. Initially, three runs of the U electrodeposition tests were conducted using LiCl-KCl-UCl3 at 500°C under a constant current. From the results obtained from the initial three runs, it was found that the maximum deposited amount of U was 7.4 wt U/Cd. U dendrite formation on the LCC crucible was not observed across each of the three runs. Three additional runs were conducted using LiCl-KCl-UCl3-RECl3 to determine the extent of U/RE electrodeposition. The maximum number of moles of U+RE metals deposited was 0.07, a value estimated to be 2.14 times higher than the solubility limits exhibited by these metals in Cd. The results of this study show that the use of a Cd stirrer significantly improves the extent of U deposition.
- 30 September 2020
- Published by The Korean Radioactive Waste Society in Journal of Nuclear Fuel Cycle and Waste Technology
- Vol. 18 (3) , 373-382
Actinide Drawdown From LiCl-KCl Eutectic Salt via Galvanic/chemical Reactions Using Rare Earth Metals
- 30 September 2020
- Published by The Korean Radioactive Waste Society in Journal of Nuclear Fuel Cycle and Waste Technology
- Vol. 18 (3) , 373-382
Actinide Drawdown From LiCl-KCl Eutectic Salt via Galvanic/chemical Reactions Using Rare Earth Metals
- 26 September 2019
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 322 (2) , 1031-1037
Determination of kinetic properties of Sm(III)/Sm(II) reaction in LiCl–KCl molten salt using cyclic voltammetry and electrochemical impedance spectroscopy
- 26 September 2019
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 322 (2) , 1031-1037
Determination of kinetic properties of Sm(III)/Sm(II) reaction in LiCl–KCl molten salt using cyclic voltammetry and electrochemical impedance spectroscopy
- 1 July 2019
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 520, 245-251
Uranium recovery via electrochemical deposition with a liquid zinc cathode followed by electrochemical oxidation of rare earth metals
- 1 July 2019
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 520, 245-251
Uranium recovery via electrochemical deposition with a liquid zinc cathode followed by electrochemical oxidation of rare earth metals
- 1 August 2016
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 476, 179-187
Effects of temperature, concentration, and uranium chloride mixture on zirconium electrochemical studies in LiCl KCl eutectic salt
- 1 August 2016
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 476, 179-187
Effects of temperature, concentration, and uranium chloride mixture on zirconium electrochemical studies in LiCl KCl eutectic salt