SKSadettin Kapucu

Sadettin Kapucu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sadettin Kapucu has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Residual Vibration Suppression in Flexible Systems Using a Tuned Four-Segment Acceleration Profile

    by Mehmet Erkan Kütük, Sadettin Kapucu

    This study presents a method for tuning input motion to suppress residual vibrations in a flexible link manipulator, with particular relevance to mechatronic positioning systems. The approach is based on a four-segment acceleration profile that combines ramp, cycloid, and ramped-versine trajectories, enabling effective vibration reduction over a wide range of travel times. Unlike the conventional continuous reference profiles considered in this study, the proposed method does not require the total motion duration to be an integer or half-integer multiple of the system’s natural period to suppress residual vibration. The motion consists of acceleration and deceleration phases, each divided into two subsections to ensure smooth transitions. The formulation is developed analytically for both undamped and underdamped systems and is validated through numerical simulations and experiments on a servo-driven mechatronic setup equipped with inertial measurement units. For the cases considered in the quantitative comparison, the proposed method reduced the dominant first-mode residual-vibration amplitude by approximately 97–100% in the simulations and 92–98% in the experiments relative to the corresponding untuned commands. Performance is evaluated using the percent residual vibration (PRV) metric, with comparisons to commonly used motion profiles, including trapezoidal, trigonometric, and cycloidal trajectories. The results indicate that substantial vibration reduction is achieved across different travel times, including cases where the motion duration is shorter than one natural period. Overall, the proposed method offers a practical and flexible alternative to conventional motion tuning techniques and is well suited for high-speed, precision-sensitive applications such as robotic manipulators and automated manufacturing systems.

  • Open Access

    Automated Identification of Sheet Metal Parts Using Deep Learning Techniques

    by Gül Sığındı, Ali Kılıç, Sadettin Kapucu

    The accurate identification and classification of sheet metal parts are crucial for optimizing production workflows, ensuring quality control, and reducing operational costs in manufacturing industries. Traditional identification methods, such as barcoding, labeling, marking and inkjet printing, have several limitations, including label deterioration, misplacement, and errors caused by manual handling. This study presents a deep learning-based automated approach for identifying sheet metal parts, significantly improving efficiency, reliability, and scalability. The methodology involves converting 2D drawings into image format, applying data augmentation techniques, and training a Convolutional Neural Network (CNN) using the InceptionV3 architecture. Furthermore, a semantic segmentation model based on U-Net is used to isolate sheet metal parts from their background, ensuring accurate classification. This study presents an integrated framework that combines classification and segmentation techniques specifically tailored for the automated identification of sheet metal parts in industrial environments. The proposed system achieves an outstanding classification accuracy with a Top-1 accuracy of 96%, Top-3 accuracy of 99.36%, and Top-5 accuracy of 100%. By automating the identification process, the proposed system eliminates the need for manual intervention, minimizes errors, and enhances traceability, making it a promising solution for smart manufacturing environments. The results demonstrate the potential of deep learning models in industrial automation and quality assurance processes in the sheet metal industry.


  • Development of Innovative Yarn Drying Unit Using Triz Effects Database

    by Ali Kiliç, Mehmet Erkan Kütük, Orhan Ersurmeli̇, Bahattin Dabaniyasti, Kemal Dabaniyasti, Sadettin Kapucu

    Günümüzde yaratıcılık ve karmaşık problemlerin çözümü mühendislik tasarımında en çok aranan niteliklerdendir. Bilindiği üzere TRIZ sistematik yaratıcılık ve yenilikçilik için en etkili yöntem olarak tanımlanmaktadır. TRIZ’in araçlarından biri olan ideallik herhangi bir teknik sistemin çalışma ömrü boyunca basit, etkili ve güvenli olması gerektiğini ifade eder. Bu çalışmada ideal sonuca yakın, yenilikçi çözüm bulma yöntemlerinden olan bilimsel etkilerin, iplik üretiminde boya sonrasında “sabitlenmemiş boyanın” temizlenmesine yönelik olarak yıkanması sonrasında kurutma problemlerinin çözümü için nasıl kullanıldığı ve erişilen çözüm analiz edilmiştir. Kısaca bilimsel veri tabanları ve kullanım yönteminden bahsedildikten sonra, problem detaylı olarak tanıtılmıştır. Etkiler veri tabanı kullanımına yönelik öngörülen algoritmanın kullanılma süreci, önerilen bilimsel etkilerden kavramsal tasarıma geçiş ve daha sonrasında da prototip oluşturularak testlerinin yapılmasından bahsedilmiştir.

  • Redefining the Problem in Problem Solving with TRIZ: Problem Formulation

    by Ali Kiliç, Mehmet Erkan Kütük, Sadettin Kapucu

    Bir problemin yenilikçi/yaratıcı çözümlerinin bulunabilmesi için en önemli adım problem tanımının yeniden düzenlenmesidir. Problem tanımını verildiği gibi alıp kullanmak, problem çözücünün bakış açısını kısıtladığı gibi tamamen yanlış yola da yönlendirebilir. Bununla birlikte çelişki içeren yenilikçilik ve yaratıcılık gerektiren problemlerdeki çelişkileri belirlemek zor olabilmektedir. Bu çalışmada, problem tanımının düzenlenmesine ve çelişkilerin belirlenmesine yönelik geliştirilmiş olan ‘problemi yeniden tanımlama’ algoritmasının endüstride karşılaşılan ‘taşıma sırasında ortaya çıkan palet devrilme’ sorununa uygulanması sunulacaktır. Problemin yeniden nasıl ifade edileceğinden ve bunun için izlenen süreçten bahsedilecektir. Elde edilen yeniden tanımlamalar ile çözüme erişmek için kullanılabilecek TRIZ yöntemleri önerilecektir.


  • Yenilikçi Ürün Tasarımında Fonksiyon Analizi ve Budama Yöntemi

    by Ali Kiliç, Orhan Ersurmeli̇, Bahatti̇n Dabaniyasti, Sadettin Kapucu

    En tr The ability of companies to compete in the market depends on their innovative product development capabilities. However, there is uncertainty about how they can be innovative. Innovative problem-solving methods, which are frequently mentioned recently, may be the answer to this question. In this study, function analysis and trimming will be mentioned which will contribute to the ability of firms to develop innovative products. Functional analysis is the visual representation of the interaction between the components of a product. This representation clearly demonstrates the functions and effects between objects. Trimming method is the process of removing, modifying of a non-functional element or creating variations of the original system in the function model. This includes the use of existing or other resources in the system to achieve the ideal final result of the system or product. By applying the function analysis and trimming, it is possible to obtain alternative innovative products to existing ones, but it is also possible to overcome the said patent even if the present product is protected by a patent. In this study, to show the applicability of methods to obtain a new innovative product by applying the function analysis and trimming on a real industrial product has been applied. Şirketlerin pazarda rekabet edebilme yetenekleri, yenilikçi ürün geliştirme kapasitelerine bağlıdır. Ancak, şirketlerin nasıl yenilikçi olabileceği konusunda belirsizlikler vardır. Son zamanlarda adından sıklıkla bahsedilen yenilikçi problem çözme yöntemleri, bu sorunun cevabı olabilir. Bu çalışmada, firmaların yenilikçi ürün geliştirebilme yeteneğine katkıda bulunacağı düşünülen fonksiyon analizi ve budama yönteminden bahsedilecektir. Fonksiyon analizi, bir ürünün bileşenlerinin arasındaki etkileşiminin görsel olarak ifade edilmesi ilkesine dayanır. Bu gösterimde nesneler arasındaki işlev ve etkiler açıkça ortaya konur. Budama yöntemi ise fonksiyon modelindeki işlevsel olmayan bir unsurun kaldırılması, değiştirilmesi ya da orijinal sisteminin varyasyonlarının oluşturulması işlemidir. Böylelikle sistemin ya da ürünün ideal nihai sonuca erişmesi için sistemdeki ya da diğer kaynakların kullanılmasını içerir. Bu analiz ve yöntemin uygulanmasıyla mevcut bir ürününe alternatif yenilikçi ürünler elde edilebileceği gibi, mevcut ürün bir patent ile korunuyorsa da söz konusu patentin kapsamını aşmak da mümkün olmaktadır. Bu çalışmada, gerçek bir endüstriyel ürün üzerinde fonksiyon analizi ve kırpma yapılarak yeni bir inovatif ürün elde etme yöntemlerinin uygulanabilirliği gösterilmiştir.

  • Open Access

    Interactional Modeling and Optimized PD Impedance Control Design for Robust Safe Fingertip Grasping

    by Izzat Al-Darraji, Ali Kılıç, Sadettin Kapucu

    Dynamic and robust control of fingertip grasping is essential in robotic hand manipulation. This study introduces detailed kinematic and dynamic mathematical modeling of a two-fingered robotic hand, which can easily be extended to a multi-fingered robotic hand and its control. The Lagrangian technique is applied as a common procedure to obtain the complete nonlinear dynamic model. Fingertip grasping is considered in developing the detailed model. The computed torque controller of six proportional derivative (PD) controllers, which use the rotation angle of the joint variables, is proposed to linearize the hand model and to establish trajectory tracking. An impedance controller of optimized gains is suggested in the control loop to regulate the impedance of the robotic hand during the interaction with the grasped object in order to provide safe grasping. In this impedance controller, the gains are designed by applying a genetic algorithm to reach minimum contact position and velocity errors. The robustness against disturbances is achieved within the overall control loop. A computer program using MATLAB is used to simulate, monitor, and test the interactional model and the designed controllers.

  • Open Access

    Simulation in virtual reality: Robotic training and surgical applications

    by A.J.R. Almusawi, L.C. Dulger, S. Kapucu

    Two case studies are performed in this study; one with 4-dof robotic system, the other 6-dof industrial robot arm . Both robot arms are actually operated in Mechatronics Laboratory, Gaziantep University. Different motion trajectories are designed, and implemented for training, medical tasks and surgical operations base. Simulations are built by using VR Toolbox in Matlab. Virtual reality environment is achieved through Simulink with real time examples . The motions and trajectories necessary for training and surgical applications are directly seen. This enables the surgeons training with many benefits; greater control during tasks reduced training periods, possibility of error free tasks for example.

  • Open Access

    Düşük Maliyetli GPS Tabanlı Otonom Bir İnsansız Kara Aracının Tasarımı ve Yapılması

    by Halit Hülako, Sadettin Kapucu

    Son yıllarda insansız araçlar araştırmacılar için oldukça popüler hale gelmiştir ve hala bu araçlar araştırmacılar ve mühendisler tarafından geliştirilmektedir. İnsansız araçlar yapması gereken görevi yardım almadan gerçekleştirebilecek bütün kabiliyetlere sahip olmalıdır. Bu çalışmada bir insansız kara aracının (İKA) bulunduğu herhangi bir konumdan, belirtilen varış noktalarına (waypoints) gitmesi çalışılmıştır. Bu amaç için tasarlanan insansız kara aracında düşük maliyetli GPS modülü ve elektronik pusula sensörü kullanılarak İKA’ nın konumu belirlenmiştir. Denetim/karar verici olarak da bir mikrodenetleyiciden faydalanılmıştır. İKA' nın çalışma prensibi şu şekildedir. Başlangıçta varış noktaları veya coğrafi koordinatlar mikrodenetleyicinin belleğine yüklenmektedir. İkinci olarak mikrodenetleyici, GPS yardımı ile İKA' nın anlık konumu ve varış noktası arasında oluşan açı farkını her 200 milisaniyede bir hesaplamaktadır. Daha sonra İKA' nın varış noktasına göre konumu belirlenmektedir. Son olarak da mikrodenetleyici, aldığı bu bilgileri elektronik pusuladan okuduğu baş açısı (heading) ile karşılaştırır ve İKA'nın yönlendirmesini sağlayan servo motorunun yapacağı doğru açıyı icra etmektedir. Ayrıca uygulanan Kalman filtresi ve güdüm algoritmasından da bahsedilmiştir. Bütünleştirilen sistemin uygulanabilirliği ve fizibilitesi test edilmiş ve sonuçlar çalışmanın sonunda verilmiştir.


  • Open Access

    Mechatronic design and genetic-algorithm-based MIMO fuzzy control of adjustable-stiffness tendon-driven robot finger

    by Izzat Al-Darraji, Ali Kılıç, Sadettin Kapucu

    This work presents a detailed design of a three-jointed tendon-driven robot finger with a cam/pulleys transmission and joint Variable Stiffness Actuator (VSA). The finger motion configuration is obtained by deriving the cam/pulleys transmission profile as a mathematical solution that is then implemented to achieve contact force isotropy on the phalanges. A VSA is proposed, in which three VSAs are designed to act as a muscle in joint space to provide firm grasping. As a mechatronic approach, a suitable type and number of force sensors and actuators are designed to sense the touch, actuate the finger, and tune the VSAs. The torque of the VSAs is controlled utilizing a designed Multi Input Multi Output (MIMO) fuzzy controller. The fuzzy controller input is the force sensors' signals that are used to set the appropriate VSA torque. The fuzzy controller parameters are then tuned using a genetic algorithm as an optimization technique. The objective function of the genetic algorithm is to avoid unbalance torque in the individual joints and to reduce the difference between the values of the supplied VSAs torques. Finally, the operation of the aforementioned finger system is organized through a simple control algorithm. The function of this algorithm is to enable the detection of the unknown object and simultaneously automatically activate the optimized fuzzy controller thus eliminating the necessity of any external control unit.