Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Celeste Jacinto has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Testing and practical validation of an individual safety performance assessment methodology – the SSP System

    by R. Mira, Celeste Jacinto, B. Dias, M. Carrasqueira, A. Fundo

    The “Safety Score Permit” (SSP) is a new tool that focuses on behaviour and is based on a point system which allows individual performance’s tracking, thus encouraging safe actions. The present study aims at verifying the applicability and practical validation of the first SSP version; the ultimate goal is to evaluate its coverage within different industrial contexts and identify limitations and opportunities for improvement. A pilot implementation was conducted in three large companies, presented as three case studies. The records of safety behaviour observations (SBO) of each case were analysed to verify if all the “observed deviations” fitted into the classes and subclasses typified in the system. Although the study basis was the same in all three cases, in two of them the research was based on existing SBO records collected in 2019, whilst in the 3rd case there was a much higher interaction throughout the work. In this case, the process was started from scratch, including the SBO procedure, its monitoring and subsequent data analysis, to create the necessary conditions for the implementation of the full system. The results obtained revealed that, in general, the SSP platform has the ability to cover most deviations identified in an organization. The system has the potential to become a useful and transparent tool to monitor employees’ safety performance at all hierarchical levels; it also helps to identify weaknesses in the companies’ OHS processes. This work was essentially exploratory but it shed light on how to improve the system further and also unveiled new opportunities. A key issue to enhance SSP as a management tool is to expand its scope to all types of human errors, thus offering better support to strategic OHS decisions.

  • Open Access

    A Social Life Cycle Assessment Framework for Additive Manufacturing Products

    by Bardia Naghshineh, Francisco Lourenço, Radu Godina, Celeste Jacinto, Helena Carvalho

    Additive Manufacturing (AM) is viewed as a disruptive technology with the potential to replace many manufacturing processes. With its rapid proliferation in recent years, it is crucial to understand how to measure this technology’s social impacts. There are many studies available in the existing literature regarding the economic and environmental impacts of AM technology. However, research regarding the social impacts of this technology is still scarce. To this end, this research has developed a framework based on Social Life Cycle Assessment (SLCA) methodology to measure AM products’ social impacts throughout their life cycle stages. The proposed framework includes an underlying mathematical model that was developed to allow for the aggregation of indicator scores. Additionally, cut-off scores were determined to differentiate between positive and negative social impacts. This framework can be applied to case studies, which provides a final score that quantifies the social impacts of an AM product throughout all its life cycle stages. It also provides scores for each stakeholder category and life cycle stage, which facilitates the identification of hotspots that require attention from organizations.


  • Safety Score Permit (SSP) to Enhance Safety Performance

    by A. Fundo, M. Carrasqueira, B. Dias, J. Santos, D. Antunes, J. Dias, C. Jacinto

  • Top Cited Papers
    Open Access

    Framework for Life Cycle Sustainability Assessment of Additive Manufacturing

    by Inês Ribeiro, Florinda Matos, Celeste Jacinto, Hafiz Salman, Gonçalo Cardeal, Helena Carvalho, Radu Godina, Paulo Peças

    Additive manufacturing (AM) is a group of technologies that create objects by adding material layer upon layer, in precise geometric shapes. They are amongst the most disruptive technologies nowadays, potentially changing value chains from the design process to the end-of-life, providing significant advantages over traditional manufacturing processes in terms of flexibility in design and production and waste minimization. Nevertheless, sustainability assessment should also be included in the research agenda as these technologies affect the People, the Planet and the Profit: the three-bottom line (3BL) assessment framework. Moreover, AM sustainability depends on each product and context that strengthens the need for its assessment through the 3BL framework. This paper explores the literature on AM sustainability, and the results are mapped in a framework aiming to support comprehensive assessments of the AM impacts in the 3BL dimensions by companies and researchers. To sustain the coherence of boundaries, three life cycle methods are proposed, each one for a specific dimension of the 3BL analysis, and two illustrative case studies are shown to exemplify the model.


  • Open Access

    Additive Manufacturing: Exploring the Social Changes and Impacts

    by Florinda Matos, Radu Godina, Celeste Jacinto, Helena Carvalho, Inês Ribeiro, Paulo Peças

    Despite the myriad of possibilities and applications of additive manufacturing (AM) technology, knowledge about the social impacts of this technology is very scarce and very limited in some areas. This paper explores how factors generated by the development of AM technology may create social impacts, affecting the health and social well-being of people, quality of life, working conditions, and the creation of wealth. This paper presents the results of an exploratory multiple case study conducted among four Portuguese organizations that use AM technology, aiming to determine their perceptions regarding the social impacts of AM, its effects, and causes. The results confirm that AM technology is mainly seen to create positive impacts on health and safety (regarding physical hazards), on expectations for the future, on leisure and recreation, on low disruption with the local economy, on economic prosperity, on the professional status, and on innovative employment types. Nevertheless, a negative impact was also found on health and safety (concerning hazardous substances), as well as several mixed and null impacts. The main limitations of the research arise from the use of a case study methodology, since the results can be influenced by contextual factors, such as the size of the organizations in the sample, and/or social, cultural, technological, political, economic, and ecological factors. This study gives an up-to-date contribution to the topic of AM social impacts and social changes, an area which is still little-explored in the literature.


  • Additive manufacturing technology: mapping social impacts

    by Florinda Matos, Celeste Jacinto

    Purpose: Recent developments in additive manufacturing (AM) technology have emphasized the issue of social impacts. However, such effects are still to be determined. So, the purpose of this paper is to map the social impacts of AM technology. Design/methodology/approach: The methodological approach applied in this study combines a literature review with computer-aided content analysis to search for keywords related to social impacts. The content analysis technique was used to identify and count the relevant keywords in academic documents associated with AM social impacts. Findings: The study found that AM technology social impacts are still in an exploratory phase. Evidence was found that several social challenges of AM technology will have an influence on the society. The topics associated with fabrication, customization, sustainability, business models and work emerged as the most relevant terms that can act as “pointers” to social impacts. Research limitations/implications: The research on this subject is strongly conditioned by the scarcity of empirical experience and, consequently, by the scarcity of data and publications on the topic. Originality/value: This study gives an up-to-date contribution to the topic of AM social impacts, which is still little explored in the literature. Moreover, the methodological approach used in this work combines bibliometrics with computer-aided content analysis, which also constitutes a contribution to support future literature reviews in any field. Overall, the results can be used to improve academic research in the topic and promote discussion among the different social actors.


  • Open Access

    Environmental impact and occupational risk in gasification plants processing residues of sewage sludge and refuse-derived fuel: a review

    by Octávio Alves, Margarida Gonçalves, Paulo Brito, Eliseu Monteiro, Celeste Jacinto

    Scope & Goals: This article presents a coupled review of scientific literature on environmental impact, as well as occupational safety and health, of gasification plants using residues of sewage sludge and refuse-derived fuel. Methods: The survey, covering a 10-year time span, was made through a typical systematic review of literature, retrieved from online databases of scientific publications and by using general search engines; cross-referencing of citations included in documents were also considered. Results: Two tables summarizing 38 publications were created, indicating relevant studies on the matter(s), and providing a short description on risks, goals and main findings of each study, followed by a general discussion. Conclusions: Overall, gas explosion and inhalation of toxic gases were the most common risks reported in published studies, being considered negligible if safety measures are adopted; however there are fewer studies focusing on occupational safety in gasification plants as compared with the environmental issue. Release of heavy metals, tar production and toxic gases are the main environmental concerns. From the prevention viewpoint, this review shows that treatment and valorisation of harmful tars must be improved in future technological and scientific developments.

  • Causal Analysis of Accidents at Work in a Shipyard Complemented with Bayesian Nets Modelling

    by B. Costa, C. Jacinto, A.P. Teixeira, C. Guedes Soares

    This paper analyses the causality of occupational accidents occurred in a Portuguese shipyard during two years, 2014 and 2015. The objective is to identify not only the immediate causes of the accidents, but also their underlying causal factors at the organizational level, aiming to identify opportunities for improvement and to reduce accident rates in the shipyard. A second objective of the paper is to explore a way of modelling, quantitatively, the system studied from the causation point of view (cause-to-effect relationships). The method for Recording, Investigation and Analysis of Accidents at Work (RIAAT) is adopted to achieve the first goal. A Bayesian Network model of the causal relationships and consequences of the occupational accidents is then developed and used to simulate and analyse quantitatively different scenarios. A tangible plan of action is proposed, in which three categories of preventive measures are suggested: Engineering, Training & Awareness and Management & Control measures.


  • A review on occupational risk in gasification plants processing residues of sewage sludge and refuse-derived fuel

    by O. Alves, M. Gonçalves, P. Brito, E. Monteiro, C. Jacinto

    This paper presents a review on Occupational Safety and Health (OSH) issues of gasification plants using residues of sewage sludge and refuse-derived fuel. The survey (2006–2016) consisted of a systematic review of literature retrieved from scientific databases. Despite abundant literature on environmental impacts of gasification plants, few publications focus on OSH aspects. Of these, 16 were considered relevant for the purpose. The results are summarized in a Table that provides a short description and the main findings of each study. It can be concluded that explosion and inhalation of toxic gases are the most common OSH risks reported in gasification processes; apparently, both are considered negligible if safety measures are adopted. Other risks identified comprise the release (and potential inhalation) of heavy metals and harmful tar production, but the main concern is on the environmental impact. Prevention measures mostly include adjusting granulometry to the type of biomass, workers’ training, good ventilation and reliable equipment.


  • Organizational practices for learning with work accidents throughout their information cycle

    by Sílvia A. Silva, Helena Carvalho, Maria João Oliveira, Tiago Fialho, C. Guedes Soares, Celeste Jacinto