Juan Camilo Acevedo Páez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Juan Camilo Acevedo Páez has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Astrid Zuleima Acevedo-Rodríguez
Grupo de Investigación Ambiente y Vida, Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
3 shared publications - Erika Arenas
Universidad Pontificia Bolivariana
3 shared publications - Carlos Francisco Valdés Renteria
Universidad Nacional de Colombia, Facultad de Minas, Escuela de Procesos y Energía, TAYEA Group, Carrera 80 No. 65-223, Medellín, Colombia
2 shared publications Jorge Augusto Hernández Mora
2 shared publicationsL C Becerra
Grupo de Investigación Ambiente y Vida, Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
2 shared publicationsN A Urbina
Grupo de Investigación Ambiente y Vida, Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 14 (1) , 1-14
Guía técnica para detección de SARS-COV-2 y virus de la hepatitis A en aguas residuales de las ciudades de Bucaramanga, Cúcuta y Valledupar como estrategia predictiva de brotes
El presente estudio tiene como objetivo formular una guía técnica para la detección de SARS-CoV-2 y del virus de la hepatitis A (HAV) en aguas residuales, con el fin de unificar criterios para el monitoreo epidemiológico en Colombia. Mediante tres fundamentos principales: el marco normativo vigente, la experiencia del equipo investigador y los documentos científicos disponible. El estudio se desarrolló bajo un diseño descriptivo de carácter longitudinal, basado en un modelo experimental previamente mencionado en documentos de Hata, con adaptaciones del protocolo Berlín-Charité actualmente empleado por el Instituto Nacional de Salud. Para ello, se realizaron muestreos en redes de alcantarillado y plantas de tratamiento en Cúcuta, Bucaramanga y Valledupar. Las muestras fueron sometidas a procesos de laboratorio como concentración viral y análisis molecular mediante RT-qPCR, técnica frecuentemente utilizada para la detección de virus en matrices ambientales. A partir de la revisión normativa, metodológica y técnica realizada durante el estudio, se identificó la importancia de disponer de procedimientos estandarizados que integren las etapas de muestreo, medición de caudal, procesamiento y análisis de muestras. En este contexto, la guía técnica desarrollada reúne criterios operativos y analíticos orientados a la vigilancia epidemiológica basada en aguas residuales para SARS-CoV-2 y HAV. Su aplicación resulta pertinente para el contexto colombiano, considerando la circulación de hepatitis A y los antecedentes derivados de la pandemia por COVID-19. La estandarización de estos procedimientos puede favorecer la comparabilidad de los resultados obtenidos entre diferentes puntos de monitoreo y apoyar los procesos de seguimiento epidemiológico. Actualmente, la validación experimental del protocolo continúa en desarrollo, etapa que permitirá evaluar su desempeño y realizar los ajustes requeridos para su implementación.
- 1 January 2026
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 14 (1) , 1-14
Open AccessGuía técnica para detección de SARS-COV-2 y virus de la hepatitis A en aguas residuales de las ciudades de Bucaramanga, Cúcuta y Valledupar como estrategia predictiva de brotes
El presente estudio tiene como objetivo formular una guía técnica para la detección de SARS-CoV-2 y del virus de la hepatitis A (HAV) en aguas residuales, con el fin de unificar criterios para el monitoreo epidemiológico en Colombia. Mediante tres fundamentos principales: el marco normativo vigente, la experiencia del equipo investigador y los documentos científicos disponible. El estudio se desarrolló bajo un diseño descriptivo de carácter longitudinal, basado en un modelo experimental previamente mencionado en documentos de Hata, con adaptaciones del protocolo Berlín-Charité actualmente empleado por el Instituto Nacional de Salud. Para ello, se realizaron muestreos en redes de alcantarillado y plantas de tratamiento en Cúcuta, Bucaramanga y Valledupar. Las muestras fueron sometidas a procesos de laboratorio como concentración viral y análisis molecular mediante RT-qPCR, técnica frecuentemente utilizada para la detección de virus en matrices ambientales. A partir de la revisión normativa, metodológica y técnica realizada durante el estudio, se identificó la importancia de disponer de procedimientos estandarizados que integren las etapas de muestreo, medición de caudal, procesamiento y análisis de muestras. En este contexto, la guía técnica desarrollada reúne criterios operativos y analíticos orientados a la vigilancia epidemiológica basada en aguas residuales para SARS-CoV-2 y HAV. Su aplicación resulta pertinente para el contexto colombiano, considerando la circulación de hepatitis A y los antecedentes derivados de la pandemia por COVID-19. La estandarización de estos procedimientos puede favorecer la comparabilidad de los resultados obtenidos entre diferentes puntos de monitoreo y apoyar los procesos de seguimiento epidemiológico. Actualmente, la validación experimental del protocolo continúa en desarrollo, etapa que permitirá evaluar su desempeño y realizar los ajustes requeridos para su implementación.
- Open Access
- 10 April 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 272
Optimizing hydrogen production and efficiency in biomass gasification through advanced CFD modeling
- 10 April 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 272
Open AccessOptimizing hydrogen production and efficiency in biomass gasification through advanced CFD modeling
- Open Access
- 7 January 2025
- Published by Corporation Universidad de la Costa, CUC in Boletín de Innovación, Logística y Operaciones
- Vol. 7 (1) , 53-66
Optimización del proceso de coquización a partir de la mezcla de materia prima
El Departamento Norte de Santander es uno de los principales productores de carbón y coque del país debido a las calidades de los carbones explotados en la región. El objetivo de este estudio es proponer un modelo de mezcla de carbón óptima que permita generar un buen rendimiento en los hornos y predecir las calidades del coque a producir, especialmente el contenido de ceniza, materia volátil y azufre con el fin de optimizar los costos de producción del coque a partir de la materia prima. La muestra utilizada proviene de 25 minas de carbón ubicadas en Norte de Santander, distribuidas en tres tipos de carbón alto volátil; tipo A, principalmente del municipio de El Zulia y Chucarima (Chitagá), tipo B, zona La Donjuana (Bochalema) y tipo C, del municipio de Sardinata. Se desarrollaron 3 tipos de mezclas y se realizó análisis próximo e índice de hinchamiento libre (FSI) a cada muestra. Como hallazgo se obtuvo una optimización del 1.85% del costo de la materia prima en el proceso de coquización, concluyendo que la mezcla óptima según calidad versus costo es la que utiliza carbones con la misma proporción de carbón tipo A y tipo B, un porcentaje balanceado de tipo C y una baja proporción de semiantracita, así mismo, se logró no solo la optimización de costos sino también de la materia prima de alta calidad “tipo A”, permitiendo hacer uso de carbones con bajo rango de calidad.
- 7 January 2025
- Published by Corporation Universidad de la Costa, CUC in Boletín de Innovación, Logística y Operaciones
- Vol. 7 (1) , 53-66
Open AccessOptimización del proceso de coquización a partir de la mezcla de materia prima
El Departamento Norte de Santander es uno de los principales productores de carbón y coque del país debido a las calidades de los carbones explotados en la región. El objetivo de este estudio es proponer un modelo de mezcla de carbón óptima que permita generar un buen rendimiento en los hornos y predecir las calidades del coque a producir, especialmente el contenido de ceniza, materia volátil y azufre con el fin de optimizar los costos de producción del coque a partir de la materia prima. La muestra utilizada proviene de 25 minas de carbón ubicadas en Norte de Santander, distribuidas en tres tipos de carbón alto volátil; tipo A, principalmente del municipio de El Zulia y Chucarima (Chitagá), tipo B, zona La Donjuana (Bochalema) y tipo C, del municipio de Sardinata. Se desarrollaron 3 tipos de mezclas y se realizó análisis próximo e índice de hinchamiento libre (FSI) a cada muestra. Como hallazgo se obtuvo una optimización del 1.85% del costo de la materia prima en el proceso de coquización, concluyendo que la mezcla óptima según calidad versus costo es la que utiliza carbones con la misma proporción de carbón tipo A y tipo B, un porcentaje balanceado de tipo C y una baja proporción de semiantracita, así mismo, se logró no solo la optimización de costos sino también de la materia prima de alta calidad “tipo A”, permitiendo hacer uso de carbones con bajo rango de calidad.
- 1 September 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (47) , 25689-25697
Hydrogen production from palm kernel shell: Kinetic modeling and simulation
- 1 September 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (47) , 25689-25697
Hydrogen production from palm kernel shell: Kinetic modeling and simulation
- Open Access
- 21 May 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (10) , 3566
Enzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System
The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.
- 21 May 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (10) , 3566
Open AccessEnzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System
The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.
- Open Access
- 1 November 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1388 (1) , 012038
Physicochemical study of used frying oil as feedstock for the production of biodiesel
A diagnosis was made of the availability and quality of the used frying oil of the establishments dedicated to chicken fry in the city of San José de Cúcuta, to evaluate its technical feasibility as a feedstock in the biodiesel production. A survey was applied to 21 restaurants, evidencing that they reuse the oil less times when having a high monthly consumption (i.e.more than 80 liters, contrary to those consuming less than 60 liters, which reuse the oil more than 3 times. As a final disposition, 86% of establishments sell the used frying oil at $750/liter and 14% deliver it to be used by external persons. The physicochemical properties of used frying oil were analyzed as: fatty acid profile, density, moisture content, refractive index, acidity index, peroxide index and saponification index. The used frying oil presented high content of oleic acid (42.45%) and palmitic acid (33.52%), converting it into a potential feedstock by presenting fatty acids characteristics from palm oil, which is the main source for the production of biodiesel in Colombia. To improve the organoleptic characteristics of the used frying oil (dark colour, strong odour, emulsions), it was subjected to heating and filtering to remove the particles that affect the yield of biodiesel production.
- 1 November 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1388 (1) , 012038
Open AccessPhysicochemical study of used frying oil as feedstock for the production of biodiesel
A diagnosis was made of the availability and quality of the used frying oil of the establishments dedicated to chicken fry in the city of San José de Cúcuta, to evaluate its technical feasibility as a feedstock in the biodiesel production. A survey was applied to 21 restaurants, evidencing that they reuse the oil less times when having a high monthly consumption (i.e.more than 80 liters, contrary to those consuming less than 60 liters, which reuse the oil more than 3 times. As a final disposition, 86% of establishments sell the used frying oil at $750/liter and 14% deliver it to be used by external persons. The physicochemical properties of used frying oil were analyzed as: fatty acid profile, density, moisture content, refractive index, acidity index, peroxide index and saponification index. The used frying oil presented high content of oleic acid (42.45%) and palmitic acid (33.52%), converting it into a potential feedstock by presenting fatty acids characteristics from palm oil, which is the main source for the production of biodiesel in Colombia. To improve the organoleptic characteristics of the used frying oil (dark colour, strong odour, emulsions), it was subjected to heating and filtering to remove the particles that affect the yield of biodiesel production.
- Open Access
- 1 July 2019
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 7 (2) , 20-26
Estudio de la producción de biodiesel por procesos químicos y enzimáticos a partir de aceite de cocina usado.
The biodiesel production was analyzed by chemical and enzymatic processes, from used cooking oil (UCO), evaluating the quality and yield of the product obtained in each method. For the chemical process, an acid esterification followed by a basic transesterification was developed, (reaction temperature: 60 °C, oil:methanol 1:6 molar ratio, concentration of KOH catalyst: 1% w/w reaction times: 55 and 70 min); and enzymatic transesterification (temperature: 38 °C, oil:methanol 1:3 molar ratio, enzyme concentration lipase XX 25 split liquid: 5%, reaction times: 3 and 6 hours). Physicochemical properties (i.e. density, kinematic viscosity, moisture content, fatty acid profile, percentage of acidity, peroxides index and saponification) of the raw material were determined. Results showed the presence of oleic acid (42.45%) and palmitic acid (33.52%). The highest yield obtained was from the chemical transesterification under the conditions of 60 °C, 1% KOH and 70 min with a conversion percentage of 96.15% and an acid number of 1.33 mmKOH/g, compared to the enzymatic transesterification which registered a high acid number of 6.91 mmKOH/g and conversion percentage of 48.81% under the conditions of 38 °C, 5% of enzyme lipase and 3 hours. Se analizó la producción de biodiesel por medios químicos y enzimáticos, a partir de aceite de cocina usado (ACU), evaluando la calidad y rendimiento del producto obtenido en cada método. Para el proceso químico se desarrolló una esterificación ácida seguida de una transesterificación básica (temperatura de reacción: 60 °C, relación molar aceite:metanol 1:6, concentración de catalizador KOH: 1% p/p), tiempos de reacción: 55 y 70 min; y la transesterificación enzimática (temperatura: 38 °C, relación molar aceite:metanol 1:3, concentración de catalizador enzima lipasa XX 25 split liquida: 5%), tiempos de reacción: 3 y 6 horas. Se determinó propiedades fisicoquímicas (i.e. densidad, viscosidad cinemática, contenido de humedad, perfil de ácidos grasos, índice de acidez, peróxidos y saponificación) de la materia prima, registrando presencia de ácido oleico (42.45%) y ácido palmítico (33.52%). El mejor rendimiento obtenido fue a partir de la transesterificación química bajo las condiciones de 60 °C, 1% KOH y 70 minutos, evidenciando un porcentaje de conversión del 96.15% y un número ácido de 1.33 mmKOH/g, en comparación con la transesterificación enzimática que registró un alto número ácido de 6.91 mmKOH/g y porcentaje de conversión de 48.8% bajo las condiciones de 38 °C, 5% de enzima lipasa y 3 horas.
- 1 July 2019
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 7 (2) , 20-26
Open AccessEstudio de la producción de biodiesel por procesos químicos y enzimáticos a partir de aceite de cocina usado.
The biodiesel production was analyzed by chemical and enzymatic processes, from used cooking oil (UCO), evaluating the quality and yield of the product obtained in each method. For the chemical process, an acid esterification followed by a basic transesterification was developed, (reaction temperature: 60 °C, oil:methanol 1:6 molar ratio, concentration of KOH catalyst: 1% w/w reaction times: 55 and 70 min); and enzymatic transesterification (temperature: 38 °C, oil:methanol 1:3 molar ratio, enzyme concentration lipase XX 25 split liquid: 5%, reaction times: 3 and 6 hours). Physicochemical properties (i.e. density, kinematic viscosity, moisture content, fatty acid profile, percentage of acidity, peroxides index and saponification) of the raw material were determined. Results showed the presence of oleic acid (42.45%) and palmitic acid (33.52%). The highest yield obtained was from the chemical transesterification under the conditions of 60 °C, 1% KOH and 70 min with a conversion percentage of 96.15% and an acid number of 1.33 mmKOH/g, compared to the enzymatic transesterification which registered a high acid number of 6.91 mmKOH/g and conversion percentage of 48.81% under the conditions of 38 °C, 5% of enzyme lipase and 3 hours. Se analizó la producción de biodiesel por medios químicos y enzimáticos, a partir de aceite de cocina usado (ACU), evaluando la calidad y rendimiento del producto obtenido en cada método. Para el proceso químico se desarrolló una esterificación ácida seguida de una transesterificación básica (temperatura de reacción: 60 °C, relación molar aceite:metanol 1:6, concentración de catalizador KOH: 1% p/p), tiempos de reacción: 55 y 70 min; y la transesterificación enzimática (temperatura: 38 °C, relación molar aceite:metanol 1:3, concentración de catalizador enzima lipasa XX 25 split liquida: 5%), tiempos de reacción: 3 y 6 horas. Se determinó propiedades fisicoquímicas (i.e. densidad, viscosidad cinemática, contenido de humedad, perfil de ácidos grasos, índice de acidez, peróxidos y saponificación) de la materia prima, registrando presencia de ácido oleico (42.45%) y ácido palmítico (33.52%). El mejor rendimiento obtenido fue a partir de la transesterificación química bajo las condiciones de 60 °C, 1% KOH y 70 minutos, evidenciando un porcentaje de conversión del 96.15% y un número ácido de 1.33 mmKOH/g, en comparación con la transesterificación enzimática que registró un alto número ácido de 6.91 mmKOH/g y porcentaje de conversión de 48.8% bajo las condiciones de 38 °C, 5% de enzima lipasa y 3 horas.
- Open Access
- 1 November 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1126 (1) , 012010
Simulation of the gasification process of palm kernel shell using Aspen PLUS
This research sought to simulate gasification of palm kernel shell (PKS) in stationary state by using Aspen PLUS®. The model can predict the syngas composition with 1.6% absolute error. Biomass is defined as a non-conventional component from its proximate and ultimate analyses. The gasification process was divided into four stages: drying, pyrolysis, oxidation, and reduction, simulated in two R-Yield and R-Equil reactors, specified through the physicochemical characterization of the PKS and the chemical reactions in equilibrium intervening in the gasification. Simulation results were validated with experimental results from other investigations with similar operating conditions. Production of H2 and CO2 increases by increasing temperature from 700 to 900°C, contrary to what occurs with CO that diminishes at higher temperatures. The steam/biomass (S/B) ratio has a significant effect on the proportion of H2 in the syngas, given that it diminishes significantly by 20.3% upon increasing the S/B ratio from 1.5 to 2.5, showing the same trend for the CO and CO2 gases.
- 1 November 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1126 (1) , 012010
Open AccessSimulation of the gasification process of palm kernel shell using Aspen PLUS
This research sought to simulate gasification of palm kernel shell (PKS) in stationary state by using Aspen PLUS®. The model can predict the syngas composition with 1.6% absolute error. Biomass is defined as a non-conventional component from its proximate and ultimate analyses. The gasification process was divided into four stages: drying, pyrolysis, oxidation, and reduction, simulated in two R-Yield and R-Equil reactors, specified through the physicochemical characterization of the PKS and the chemical reactions in equilibrium intervening in the gasification. Simulation results were validated with experimental results from other investigations with similar operating conditions. Production of H2 and CO2 increases by increasing temperature from 700 to 900°C, contrary to what occurs with CO that diminishes at higher temperatures. The steam/biomass (S/B) ratio has a significant effect on the proportion of H2 in the syngas, given that it diminishes significantly by 20.3% upon increasing the S/B ratio from 1.5 to 2.5, showing the same trend for the CO and CO2 gases.
- Open Access
- 1 November 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1126 (1) , 012006
Analysis of the biodiesel production yield from waste frying oil
This research sought to produce biodiesel from waste frying oil (WFO) from chicken grills by using chemical transesterification to evaluate quality conditions and the yield of the biodiesel obtained. For this, acid esterification and basic transesterification were applied under the following conditions: reaction temperature 60°C, catalyst concentration of 1% (m/m) KOH, oil:alcohol 1: 6 molar ratio, and two reaction times (55 and 70min) for the transesterification. The physicochemical properties of the raw material were analyzed (i.e., density, humidity, kinematic viscosity, fatty acid profile, acidity index, peroxides, and saponification) where the WFO showed high contents of oleic acid (42.45%) and palmitic acid (33.52%), which are fundamental for biodiesel production. Chemical transesterification under the conditions of 60°C, 1% KOH, and 70min obtained the best yield by presenting a high conversion percentage (96.15%) and an acid number of 1.33mmKOH/g, according to ASTM D6751 and EN 14214 international standards.
- 1 November 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1126 (1) , 012006
Open AccessAnalysis of the biodiesel production yield from waste frying oil
This research sought to produce biodiesel from waste frying oil (WFO) from chicken grills by using chemical transesterification to evaluate quality conditions and the yield of the biodiesel obtained. For this, acid esterification and basic transesterification were applied under the following conditions: reaction temperature 60°C, catalyst concentration of 1% (m/m) KOH, oil:alcohol 1: 6 molar ratio, and two reaction times (55 and 70min) for the transesterification. The physicochemical properties of the raw material were analyzed (i.e., density, humidity, kinematic viscosity, fatty acid profile, acidity index, peroxides, and saponification) where the WFO showed high contents of oleic acid (42.45%) and palmitic acid (33.52%), which are fundamental for biodiesel production. Chemical transesterification under the conditions of 60°C, 1% KOH, and 70min obtained the best yield by presenting a high conversion percentage (96.15%) and an acid number of 1.33mmKOH/g, according to ASTM D6751 and EN 14214 international standards.
- Open Access
- 1 July 2016
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 4 (2) , 12-18
Metodología para la estandarización del modelo normativo en centrales eléctricas de Norte de Santander – Grupo EPM.
This document defines the methodology for standardizing the normative management model of CENS - Grupo EPM. To develop this methodology, a diagnosis of the current model was conducted using a structured questionnaire that determined the extent of the staff´s knowledge of policy management. Applied normative elements and implemented management systems were also analyzed, identifying those requirements that can be fulfilled through regulatory means. Finally, the current regulatory model of CENS was compared with the model of other electrical companies in Colombia and Mexico, highlighting flaws that require adaptations to the current regulatory model. Those adaptations will contribute to the successful execution of the processes and will help to meet the requirements of the management systems, all of which aim to strengthen the rules regarding the four regulatory elements discussed in Bussines Process Management. El presente documento define la metodología para la estandarización del modelo normativo de CENS - Grupo EPM, para su construcción se realizó un diagnóstico del modelo actual aplicando un cuestionario estructurado que determinó el grado de conocimiento del personal sobre la Gestión Normativa, así mismo, se analizaron los elementos normativos aplicados y los sistemas de gestión implementados, identificando requisitos a los que pueda darse cumplimiento a través de elementos normativos, finalmente se comparó el modelo normativo actual de CENS con el modelo de otras empresas del sector eléctrico en Colombia y en México, evidenciando falencias que requerían adecuar el modelo normativo actual a fin que se convierta en un aporte para la operacionalización de los procesos y permita cumplir los requisitos establecidos en los sistemas de gestión, por lo que se propone consolidar las normas en cuatro elementos normativos con enfoque Bussines Process Managment.
- 1 July 2016
- Published by Universidad de Santander - UDES in AiBi Revista de Investigación, Administración e Ingeniería
- Vol. 4 (2) , 12-18
Open AccessMetodología para la estandarización del modelo normativo en centrales eléctricas de Norte de Santander – Grupo EPM.
This document defines the methodology for standardizing the normative management model of CENS - Grupo EPM. To develop this methodology, a diagnosis of the current model was conducted using a structured questionnaire that determined the extent of the staff´s knowledge of policy management. Applied normative elements and implemented management systems were also analyzed, identifying those requirements that can be fulfilled through regulatory means. Finally, the current regulatory model of CENS was compared with the model of other electrical companies in Colombia and Mexico, highlighting flaws that require adaptations to the current regulatory model. Those adaptations will contribute to the successful execution of the processes and will help to meet the requirements of the management systems, all of which aim to strengthen the rules regarding the four regulatory elements discussed in Bussines Process Management. El presente documento define la metodología para la estandarización del modelo normativo de CENS - Grupo EPM, para su construcción se realizó un diagnóstico del modelo actual aplicando un cuestionario estructurado que determinó el grado de conocimiento del personal sobre la Gestión Normativa, así mismo, se analizaron los elementos normativos aplicados y los sistemas de gestión implementados, identificando requisitos a los que pueda darse cumplimiento a través de elementos normativos, finalmente se comparó el modelo normativo actual de CENS con el modelo de otras empresas del sector eléctrico en Colombia y en México, evidenciando falencias que requerían adecuar el modelo normativo actual a fin que se convierta en un aporte para la operacionalización de los procesos y permita cumplir los requisitos establecidos en los sistemas de gestión, por lo que se propone consolidar las normas en cuatro elementos normativos con enfoque Bussines Process Managment.