AHAlex Henning

Alex Henning

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alex Henning has a total of 186 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optically detected magnetic resonance of wafer-scale hexagonal boron nitride thin films

    by Sam C Scholten, Jakub Iwański, Kaijian Xing, Johannes Binder, Aleksandra K Dąbrowska, Hark H Tan, Tin S Cheng, Jonathan Bradford, Christopher J Mellor, Peter H Beton, et al.

    Hexagonal boron nitride (hBN) has recently been shown to host native defects exhibiting optically detected magnetic resonance (ODMR) with applications in nanoscale magnetic sensing and imaging. To advance these applications, deposition methods to create wafer-scale hBN films with controlled thicknesses are desirable, but a systematic study of the ODMR properties of the resultant films is lacking. Here we perform ODMR measurements of thin films (3–2000 nm thick) grown via three different methods: metal–organic chemical vapour deposition (MOCVD), CVD, and molecular beam epitaxy. We find that they all exhibit an ODMR response, including the thinnest 3 nm film, albeit with different characteristics. The best volume-normalized magnetic sensitivity obtained is 30 µ T Hz − 1 / 2 μ m 3 / 2 . We study the effect of growth temperature on a series of MOCVD samples grown under otherwise fixed conditions and find 800 ∘ C–900 ∘ C to be an optimum range for magnetic sensitivity, with a significant improvement (up to two orders of magnitude) from post-growth annealing. This work provides a useful baseline for the magnetic sensitivity of hBN thin films deposited via standard methods and informs the feasibility of future sensing applications.


  • Open Access

    Suppressing substrate oxidation during plasma-enhanced atomic layer deposition on semiconductor surfaces

    by Oliver Bienek, Tim Rieth, Julius Kühne, Benedikt Fuchs, Matthias Kuhl, Laura I. Wagner, Lina M. Todenhagen, Lukas Wolz, Alex Henning, Ian D. Sharp

    Plasma-enhanced atomic layer deposition (PE-ALD) is widely employed in microelectronics, energy, and sensing applications. Typically, PE-ALD processes for metal oxides utilize remote inductively coupled plasmas operated at powers of >200 W, ensuring a sufficient flux of oxygen radicals to the growth surface. However, this approach often leads to significant oxidation of chemically sensitive substrates, including most technological semiconductors. Here, we demonstrate that plasma powers as low as 5 W can effectively suppress substrate oxidation while maintaining the structural, optical, and electronic quality of the films. Specifically, we investigate the growth of titanium oxide (TiOx) using two commonly used metalorganic precursors, titanium isopropoxide and tetrakis(dimethylamino)titanium. Films deposited with 5 and 300 W oxygen plasma power are nearly indiscernible from one another, exhibiting significantly lower defect concentrations than those obtained from thermal ALD with H2O. The low plasma power process preserves desired physical characteristics of PE-ALD films, including large optical constants (n > 2.45 at 589 nm), negligible defect-induced sub-bandgap optical absorption (α < 102 cm−1), and high electrical resistivity (>105 Ω cm). Similar behavior, including suppressed interface oxidation and low defect content, is observed on both Si and InP substrates. As an example application of this approach, the assessment of InP/TiOx photocathodes and Si/TiOx photoanodes reveals a significant improvement in the photocurrent onset potential in both cases, enabled by suppressed substrate oxidation during low power PE-ALD. Overall, low power PE-ALD represents a generally applicable strategy for producing high quality metal oxide thin films while minimizing detrimental substrate reactions.


  • Engineering Defects and Interfaces of Atomic Layer-Deposited TiOx-Protective Coatings for Efficient III–V Semiconductor Photocathodes

    by Oliver Bienek, Benedikt Fuchs, Matthias Kuhl, Tim Rieth, Julius Kühne, Laura I. Wagner, Lina M. Todenhagen, Lukas Wolz, Alex Henning, Ian D. Sharp


  • Open Access

    Tunable Encapsulation and Doping of Monolayer MoS2 by In Situ Probing of Excitonic Properties During Atomic Layer Deposition

    by Alex Henning, Sergej Levashov, Chenjiang Qian, Theresa Grünleitner, Julian Primbs, Jonathan J. Finley, Ian D. Sharp

    Here, it is shown that in situ spectroscopic ellipsometry (SE) is a powerful method for probing the effects of reactant adsorption and film formation on the excitonic properties of 2D materials during atomic layer deposition (ALD), thus allowing optimization of both film growth and opto(electronic) characteristics in real time. Facilitated by in situ SE during ALD on monolayer MoS2, a low temperature (40 °C) process for encapsulation of the 2D material with a nanometer‐thin alumina (AlOx) layer is investigated, which results in a 2D/3D interface governed by van der Waals interactions rather than chemical bonding. Charge transfer doping of MoS2 by AlOx is found to be an interfacial phenomenon that initiates from the earliest stages of film formation, but saturates upon deposition of a closed layer. However, the lack of chemical binding interactions at the 2D/3D interface enables physical removal of the AlOx that results in a reversal of the charge transfer doping effect. Overall, it is demonstrated that in situ SE of 2D materials during ALD can precisely probe the impact of film formation on sensitive optoelectronic characteristics of 2D materials, which is of key importance in the development of integrated 2D/3D systems.


  • Open Access

    Spatially‐Modulated Silicon Interface Energetics Via Hydrogen Plasma‐Assisted Atomic Layer Deposition of Ultrathin Alumina

    by Alex Henning, Johannes D. Bartl, Lukas Wolz, Maximilian Christis, Felix Rauh, Michele Bissolo, Theresa Grünleitner, Johanna Eichhorn, Patrick Zeller, Matteo Amati, et al.

    Atomic layer deposition (ALD) is a key technique for the continued scaling of semiconductor devices, which increasingly relies on scalable processes for interface manipulation of structured surfaces on the atomic level. While ALD allows the synthesis of conformal films with utmost control over the thickness, atomically‐defined closed coatings and surface modifications are challenging to achieve because of 3D growth during nucleation. Here, a route is presented toward the sub‐nanometer thin and continuous aluminum oxide (AlOx) coatings on silicon substrates for the spatial control of the surface charge density and interface energetics. Trimethylaluminum in combination with remote hydrogen plasma is used instead of a gas‐phase oxidant for the transformation of silicon dioxide (SiO2) into alumina. Depending on the number of ALD cycles, the SiO2 can be partially or fully transformed, which is exploited to deposit ultrathin AlOx layers in selected regions defined by lithographic patterning. The resulting patterned surfaces are characterized by lateral AlOx/SiO2 interfaces possessing 0.3 nm step heights and surface potential steps exceeding 0.4 V. In addition, the introduction of fixed negative charges of 9 × 1012 cm−2 enables modulation of the surface band bending, which is relevant to the field‐effect passivation of silicon and low‐impedance charge transfer across contact interfaces.


  • Real-Time Investigation of Sulfur Vacancy Generation and Passivation in Monolayer Molybdenum Disulfide via in situ X-ray Photoelectron Spectromicroscopy

    by Theresa Grünleitner, Alex Henning, Michele Bissolo, Marisa Zengerle, Luca Gregoratti, Matteo Amati, Patrick Zeller, Johanna Eichhorn, Andreas V. Stier, Alexander W. Holleitner, et al.

    Understanding the chemical and electronic properties of point defects in two-dimensional materials, as well as their generation and passivation, is essential for the development of functional systems, spanning from next-generation optoelectronic devices to advanced catalysis. Here, we use synchrotron-based X-ray photoelectron spectroscopy (XPS) with submicron spatial resolution to create sulfur vacancies (SVs) in monolayer MoS2 and monitor their chemical and electronic properties in situ during the defect creation process. X-ray irradiation leads to the emergence of a distinct Mo 3d spectral feature associated with undercoordinated Mo atoms. Real-time analysis of the evolution of this feature, along with the decrease of S content, reveals predominant monosulfur vacancy generation at low doses and preferential disulfur vacancy generation at high doses. Formation of these defects leads to a shift of the Fermi level toward the valence band (VB) edge, introduction of electronic states within the VB, and formation of lateral pn junctions. These findings are consistent with theoretical predictions that SVs serve as deep acceptors and are not responsible for the ubiquitous n-type conductivity of MoS2. In addition, we find that these defects are metastable upon short-term exposure to ambient air. By contrast, in situ oxygen exposure during XPS measurements enables passivation of SVs, resulting in partial elimination of undercoordinated Mo sites and reduction of SV-related states near the VB edge. Correlative Raman spectroscopy and photoluminescence measurements confirm our findings of localized SV generation and passivation, thereby demonstrating the connection between chemical, structural, and optoelectronic properties of SVs in MoS2.


  • Using Metal–Organic Frameworks to Confine Liquid Samples for Nanoscale NV-NMR

    by Kristina S. Liu, Xiaoxin Ma, Roberto Rizzato, Anna L. Semrau, Alex Henning, Ian D. Sharp, Roland A. Fischer, Dominik B. Bucher

    Atomic-scale magnetic field sensors based on nitrogen vacancy (NV) defects in diamonds are an exciting platform for nanoscale nuclear magnetic resonance (NMR) spectroscopy. The detection of NMR signals from a few zeptoliters to single molecules or even single nuclear spins has been demonstrated using NV centers close to the diamond surface. However, fast molecular diffusion of sample molecules in and out of the nanoscale detection volumes impedes their detection and limits current experiments to solid-state or highly viscous samples. Here, we show that restricting diffusion by confinement enables nanoscale NMR spectroscopy of liquid samples. Our approach uses metal-organic frameworks (MOF) with angstrom-sized pores on a diamond chip to trap sample molecules near the NV centers. This enables the detection of NMR signals from a liquid sample, which would not be detectable without confinement. These results set the route for nanoscale liquid-phase NMR with high spectral resolution.


  • Open Access

    Spatially-Modulated Silicon Interface Energetics via Hydrogen Plasma-Assisted Atomic Layer Deposition of Ultrathin Alumina

    by Alex Henning, Johannes D. Bartl, Lukas Wolz, Maximilian Christis, Felix Rauh, Michele Bissolo, Theresa Grünleitner, Johanna Eichhorn, Patrick Zeller, Matteo Amati, et al.

    Atomic layer deposition (ALD) is a key technique for the continued scaling of semiconductor devices, which increasingly relies on reproducible and scalable processes for interface manipulation of 3D structured surfaces on the atomic scale. While ALD allows the synthesis of conformal films at low temperature with utmost control over the thickness, atomically-defined closed coatings and surface modifications are still extremely difficult to achieve because of three-dimensional growth during nucleation. Here, we present a route towards sub-nanometer thin and continuous aluminum oxide (AlOx) coatings on silicon (Si) substrates for the spatial control of the surface charge density and interface energetics. We use trimethylaluminum (TMA) in combination with remote hydrogen plasma instead of a gas-phase oxidant for the transformation of silicon oxide into alumina (AlOx). During the initial ALD cycles, TMA reacts with the surface oxide (SiO2) on silicon until there is a saturation of bindings sites, after which the oxygen from the underlying surface oxide is consumed, thereby transforming the silicon oxide into Si capped with AlOx. Depending on the number of ALD cycles, the SiO2 can be partially or fully transformed, which we exploit to create sub-nanometer thin and continuous AlOx layers deposited in selected regions defined by lithographic patterning. The resulting patterned surfaces are characterized by lateral AlOx/SiO2 interfaces possessing step heights as small as 0.3 nm and surface potential steps in excess of 0.4 V. In addition, the introduction of fixed negative charges of $9 \times 10^{12}$ cm$^{-2}$ enables modulation of the surface band bending, which is relevant to the field-effect passivation of Si and low-impedance charge transfer across contact interfaces.

  • Open Access

    Designing Multifunctional Cobalt Oxide Layers for Efficient and Stable Electrochemical Oxygen Evolution

    by Matthias Kuhl, Alex Henning, Lukas Haller, Laura I. Wagner, Chang‐Ming Jiang, Verena Streibel, Ian D. Sharp, Johanna Eichhorn

    Disordered and porous metal oxides are promising earth‐abundant and cost‐effective alternatives to noble‐metal electrocatalysts. Herein, nonsaturated oxidation in plasma‐enhanced atomic layer deposition is leveraged to tune the structural, mechanical, and optical properties of biphasic cobalt hydroxide films, thereby tailoring their catalytic activities and chemical stabilities. Short oxygen plasma exposure times and low plasma powers incompletely oxidize the cobaltocene precursor to Co(OH)2 and result in carbon impurity incorporation. These Co(OH)2 films are highly porous and catalytically active, but their electrochemical stability is impacted by poor substrate adhesion. In contrast, long exposure times and high powers completely oxidize the precursor to Co3O4, reduce the carbon incorporation, and improve the crystallinity. While the Co3O4 films have high electrochemical stability, they are characterized by low oxygen evolution reaction activity. To overcome these competing properties, the established relation between deposition parameters and functional film properties is applied to design bilayer films exhibiting simultaneously improved electrochemical performance and chemical stability. The bilayer films combine a highly active Co(OH)2 surface with a stable Co3O4 interface layer. These coatings exhibit minimal light absorption, thus making them suitable as protective catalytic layers on semiconductor light absorbers for application in photoelectrochemical devices.


  • Open Access

    Solution-based synthesis of wafer-scale epitaxial BiVO 4 thin films exhibiting high structural and optoelectronic quality

    by Viktoria F. Kunzelmann, Chang-Ming Jiang, Irina Ihrke, Elise Sirotti, Tim Rieth, Alex Henning, Johanna Eichhorn, Ian D. Sharp

    Epitaxial, (010)-oriented BiVO 4 films on 2′′ wafers synthesized by spin-coating and metalorganic decomposition exhibit remarkably high crystal quality. Spectroscopy reveals a large uniaxial optical anisotropy, confirming theoretical predictions.