Yaoran Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaoran Fang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Man Hay Pong
Department of Electrical and Electronic Engineering, The University of Hong Kong, Pok Fu Lam, Hong Kong
4 shared publications - Shu Yuen Ron Hui
City University of Hong Kong
2 shared publications - Chi-Kwan Lee
School of Electrical and Data Engineering, University of Technology Sydney, Australia
1 shared publication - Godwin Kwun Yuan Ho
Univ Hong Kong, Dept Elect Engn, Pokfulam, Hong Kong 852, Peoples R China
1 shared publication - Jialong Qu
Energy Research Institute @ NTU Nanyang Technological University Singapore Singapore
1 shared publication
Latest Publications
- 3 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (2) , 1400-1410
Quasi-Static Modeling and Optimization of Two-Layer PCB Resonators in Wireless Power Transfer Systems for 110-kV Power Grid Online Monitoring Equipment
The expanding functions of the emerging smart grid have posed new technical challenges on the power supplies for online monitoring systems in the transmission and distribution networks. A recent study has suggested that magnetic energy around the transmission line can be harvested and delivered wirelessly to the monitoring equipment through printed circuit board (PCB) resonators embedded inside an insulation rod. This article presents a rigorous analysis, modeling, and optimization of such PCB resonators. A new closed-form quasi-static model of the PCB resonators is derived. A fully automated simulation-driven optimization framework is constructed to enhance the quality factor of the resonator. Practical measurements show that the optimal design improves the quality factor ( $Q$ factor) from 52 to 132 as compared to the existing trial-and-error design. The corresponding wireless power transfer efficiency in a 20-W prototype across a 1.14-m distance improves significantly from 11 to 46%.
- 3 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (2) , 1400-1410
Quasi-Static Modeling and Optimization of Two-Layer PCB Resonators in Wireless Power Transfer Systems for 110-kV Power Grid Online Monitoring Equipment
The expanding functions of the emerging smart grid have posed new technical challenges on the power supplies for online monitoring systems in the transmission and distribution networks. A recent study has suggested that magnetic energy around the transmission line can be harvested and delivered wirelessly to the monitoring equipment through printed circuit board (PCB) resonators embedded inside an insulation rod. This article presents a rigorous analysis, modeling, and optimization of such PCB resonators. A new closed-form quasi-static model of the PCB resonators is derived. A fully automated simulation-driven optimization framework is constructed to enhance the quality factor of the resonator. Practical measurements show that the optimal design improves the quality factor ( $Q$ factor) from 52 to 132 as compared to the existing trial-and-error design. The corresponding wireless power transfer efficiency in a 20-W prototype across a 1.14-m distance improves significantly from 11 to 46%.
- 26 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1205-1216
An Enhanced Multiple Harmonics Analysis Method for Wireless Power Transfer Systems
First harmonic analysis (FHA) is arguably the most widely used analytical technique for wireless power transfer (WPT) circuits due to its simplicity. Although FHA can provide closed-form solutions, the existence of rectifier diode forward voltage drop and higher-order harmonics, especially the second and third harmonics at variable duty cycle operation, can significantly deteriorate its accuracy. This paper presents an accurate and efficient method called enhanced multiple harmonic analysis (eMHA) for the optimal design and optimal control of WPT systems. The eMHA method considers the nature of nonlinear rectification networks under non-sinusoidal current and reexamines the concept of the equivalent load. As a result, the rectified WPT system is transformed into a series of linear systems with complex load impedances. The steady-state electric quantities can be then explicitly calculated. This enables eMHA to seamlessly work with numerical optimization algorithms to facilitate the automated design and optimization of WPT systems. An example of optimal design and optimal control of a 10 W WPT system is demonstrated. The results obtained by eMHA and FHA are also compared. A prototype of the designed circuit was constructed. The accuracy and effectiveness of eMHA are verified by experimental measurements.
- 26 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1205-1216
An Enhanced Multiple Harmonics Analysis Method for Wireless Power Transfer Systems
First harmonic analysis (FHA) is arguably the most widely used analytical technique for wireless power transfer (WPT) circuits due to its simplicity. Although FHA can provide closed-form solutions, the existence of rectifier diode forward voltage drop and higher-order harmonics, especially the second and third harmonics at variable duty cycle operation, can significantly deteriorate its accuracy. This paper presents an accurate and efficient method called enhanced multiple harmonic analysis (eMHA) for the optimal design and optimal control of WPT systems. The eMHA method considers the nature of nonlinear rectification networks under non-sinusoidal current and reexamines the concept of the equivalent load. As a result, the rectified WPT system is transformed into a series of linear systems with complex load impedances. The steady-state electric quantities can be then explicitly calculated. This enables eMHA to seamlessly work with numerical optimization algorithms to facilitate the automated design and optimization of WPT systems. An example of optimal design and optimal control of a 10 W WPT system is demonstrated. The results obtained by eMHA and FHA are also compared. A prototype of the designed circuit was constructed. The accuracy and effectiveness of eMHA are verified by experimental measurements.
- 15 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (2) , 1605-1614
A Multiphysics Design and Optimization Method for Air-Core Planar Transformers in High-Frequency LLC Resonant Converters
Air-core planar transformers are attractive alternatives to ferrite-core transformers for high-frequency power converters, such as LLC resonant converters. Although many design methods have been proposed for LLC converters, most of them are based on traditional ferrite-core transformers. There is a lack of efficient methods to design and optimize air-core planar transformers for high-frequency LLC converters. This paper presents a multiphysics optimal design framework that combines multiple physical models, progressive bisection design method and Bayesian optimization technique to address air-core planar transformer design issues. It has the following contributions: 1) Multiple physical models, including circuit model, magnetostatic model, full-wave electromagnetic model, are built for transformer design and efficiency evaluation; 2) Progressive bisection method and Bayesian optimization algorithm are applied to accelerate the optimal design process; 3) The proposed framework can accurately and efficiently design optimal air-core planar transformers and optimize efficiency in LLC converters; 4) A high-frequency flexible and thin LLC converter is constructed using the optimal design method.
- 15 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (2) , 1605-1614
A Multiphysics Design and Optimization Method for Air-Core Planar Transformers in High-Frequency LLC Resonant Converters
Air-core planar transformers are attractive alternatives to ferrite-core transformers for high-frequency power converters, such as LLC resonant converters. Although many design methods have been proposed for LLC converters, most of them are based on traditional ferrite-core transformers. There is a lack of efficient methods to design and optimize air-core planar transformers for high-frequency LLC converters. This paper presents a multiphysics optimal design framework that combines multiple physical models, progressive bisection design method and Bayesian optimization technique to address air-core planar transformer design issues. It has the following contributions: 1) Multiple physical models, including circuit model, magnetostatic model, full-wave electromagnetic model, are built for transformer design and efficiency evaluation; 2) Progressive bisection method and Bayesian optimization algorithm are applied to accelerate the optimal design process; 3) The proposed framework can accurately and efficiently design optimal air-core planar transformers and optimize efficiency in LLC converters; 4) A high-frequency flexible and thin LLC converter is constructed using the optimal design method.
- 29 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (5) , 4023-4030
Multiple Harmonics Analysis for Variable Frequency Asymmetrical Pulsewidth-Modulated Wireless Power Transfer Systems
Variable frequency asymmetrical pulse-width-modulation (VFAPWM) is widely used in wireless power transfer (WPT) systems to control the amount of power transferred. This control scheme is also adopted in Qi, one of the world's most well-known wireless charging standards. Conventionally, analysis of WPT systems is based on first harmonics approximation (FHA), which only considers the fundamental harmonic signals. This could be inaccurate for variable frequency asymmetrical pulse-width-modulated WPT systems because VFAPWM inherently produces multiple harmonics. In this paper a new analytical technique, called multiple harmonics analysis (MHA), is developed to analyze series-series compensated WPT systems. The MHA technique is a comprehensive design foundation and provides a set of closed-form solutions to predict quantities such as zero-voltage switching (ZVS) and voltage gain. New phenomena in ZVS and voltage gain are discovered. The accuracy of MHA is also confirmed by both simulation and experimental measurements.
- 29 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (5) , 4023-4030
Multiple Harmonics Analysis for Variable Frequency Asymmetrical Pulsewidth-Modulated Wireless Power Transfer Systems
Variable frequency asymmetrical pulse-width-modulation (VFAPWM) is widely used in wireless power transfer (WPT) systems to control the amount of power transferred. This control scheme is also adopted in Qi, one of the world's most well-known wireless charging standards. Conventionally, analysis of WPT systems is based on first harmonics approximation (FHA), which only considers the fundamental harmonic signals. This could be inaccurate for variable frequency asymmetrical pulse-width-modulated WPT systems because VFAPWM inherently produces multiple harmonics. In this paper a new analytical technique, called multiple harmonics analysis (MHA), is developed to analyze series-series compensated WPT systems. The MHA technique is a comprehensive design foundation and provides a set of closed-form solutions to predict quantities such as zero-voltage switching (ZVS) and voltage gain. New phenomena in ZVS and voltage gain are discovered. The accuracy of MHA is also confirmed by both simulation and experimental measurements.