Pinyang Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Pinyang Fang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Wei Long
Xi’an Structure Function Materials International Science and technology Cooperation Base, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an, China
16 shared publicationsZengzhe Xi
Xi’an Structure Function Materials International Science and technology Cooperation Base, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an, China
15 shared publications- Xiaojuan Li
Shaanxi Key Laboratory of Photoelectric Functional Materials and Devices, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021, China
10 shared publications Xiaojuan Li
Xi’an Structure Function Materials International Science and technology Cooperation Base, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an, China
9 shared publications- Zengzhe Xi
Shaanxi Key Laboratory of Photoelectric Functional Materials and Devices, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021, China
9 shared publications Chongyang Zhi
Shaanxi Key Laboratory of Photoelectric Functional Materials and Devices, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an, China
4 shared publications
Latest Publications
- 22 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (27) , 1-11
Electrical properties of low-temperature sintered PIN-PSN-PT ceramics with BiFeO3 addition
- 22 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (27) , 1-11
Electrical properties of low-temperature sintered PIN-PSN-PT ceramics with BiFeO3 addition
- 21 September 2024
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 112 (2) , 614-623
Phase structure evolution and electric properties of PSN-PIN-PT ferroelectric ceramics near MPB
- 21 September 2024
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 112 (2) , 614-623
Phase structure evolution and electric properties of PSN-PIN-PT ferroelectric ceramics near MPB
- 6 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5258-5268
Secondary phase softening effect in PZT‐based ceramics by introducing the random electric fields
In this work, the random electric fields are constructed in the hard PZT ceramics by adding the ZnO particles as a secondary phase to tune the piezoelectric properties and losses. It is found that the internal bias electric field existing in the hard PZT ceramics has been tuned successfully by the random electric fields and its value reduces with the increased ZnO content. As a consequence, the piezoelectric constant d 33 reaches up to 483 pC/N in the PZT/0.75 wt%ZnO composite, which is much higher than that of the hard PZT matrix. In the meantime, the electromechanical quality factor Q m , dielectric loss tan δ , and Curie temperature T C for this composite are about 1109, 0.55%, and 279°C, respectively. The promoted d 33 is attributed to the small domain size and reduced internal bias electric field, whereas the low losses (large Q m and low tan δ ) can be put down to the still existing nonzero internal bias electric field.
- 6 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5258-5268
Secondary phase softening effect in PZT‐based ceramics by introducing the random electric fields
In this work, the random electric fields are constructed in the hard PZT ceramics by adding the ZnO particles as a secondary phase to tune the piezoelectric properties and losses. It is found that the internal bias electric field existing in the hard PZT ceramics has been tuned successfully by the random electric fields and its value reduces with the increased ZnO content. As a consequence, the piezoelectric constant d 33 reaches up to 483 pC/N in the PZT/0.75 wt%ZnO composite, which is much higher than that of the hard PZT matrix. In the meantime, the electromechanical quality factor Q m , dielectric loss tan δ , and Curie temperature T C for this composite are about 1109, 0.55%, and 279°C, respectively. The promoted d 33 is attributed to the small domain size and reduced internal bias electric field, whereas the low losses (large Q m and low tan δ ) can be put down to the still existing nonzero internal bias electric field.
- 19 April 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (11) , 1-10
High phase transition temperatures and piezoelectric properties in PIN-PSN-PT ternary ceramics with MPB compositions
- 19 April 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (11) , 1-10
High phase transition temperatures and piezoelectric properties in PIN-PSN-PT ternary ceramics with MPB compositions
- 17 September 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (20) , 25425-25432
Giant dielectric response associated with the component in the A/B sites co-substituted BaBi4Ti4O15 ceramics
- 17 September 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (20) , 25425-25432
Giant dielectric response associated with the component in the A/B sites co-substituted BaBi4Ti4O15 ceramics
- Open Access
Optical Properties and Band Gap of Ternary PSN-PMN-PT Single Crystals
This study investigated the optical properties and the interband transition of a ternary [100]-oriented 6PSN-61PMN-33PT relaxor ferroelectric single crystal. Compared with the binary [100]-oriented PMN-32PT crystal, the [100]-oriented 6PSN-61PMN-33PT crystal exhibited excellent optical properties, including high transmittance, low refractive index, weak frequency dispersion, and low reflection and absorption coefficients. All these differences can be attributed to the structural changes of the 6PSN-61PMN-33PT crystal, such as its large lattice size and increased band gap. The crystal’s transmittance was significantly improved after alternating current electric field poling due to the increased domain size and the order domain structure. The largest transmittance for the 6PSN-61PMN-33PT crystal was up to 66%. Our experimental results indicate that the ternary 6PSN-61PMN-33PT ferroelectric single crystal has great application potential in the optical field.
Open AccessOptical Properties and Band Gap of Ternary PSN-PMN-PT Single Crystals
This study investigated the optical properties and the interband transition of a ternary [100]-oriented 6PSN-61PMN-33PT relaxor ferroelectric single crystal. Compared with the binary [100]-oriented PMN-32PT crystal, the [100]-oriented 6PSN-61PMN-33PT crystal exhibited excellent optical properties, including high transmittance, low refractive index, weak frequency dispersion, and low reflection and absorption coefficients. All these differences can be attributed to the structural changes of the 6PSN-61PMN-33PT crystal, such as its large lattice size and increased band gap. The crystal’s transmittance was significantly improved after alternating current electric field poling due to the increased domain size and the order domain structure. The largest transmittance for the 6PSN-61PMN-33PT crystal was up to 66%. Our experimental results indicate that the ternary 6PSN-61PMN-33PT ferroelectric single crystal has great application potential in the optical field.
- 1 July 2021
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (12) , 6254-6265
Optimized piezoelectric properties and temperature stability in PSN‐PMN‐PT by adjusting the phase structure and grain size
For relaxor ferroelectric materials, improving the piezoelectric properties and temperature stability simultaneously is still a great challenge up to now. In this work, the structure, electric properties, and thermal stability of xPSN‐(1 − x)PMN‐0.4PT (x = 0.15, 0.29, 0.43, and 0.5) ceramics were studied systematically by experiment and phase field simulation. A high Curie temperature Tc of 255℃ and good longitudinal electricmechanical coupling factor k33 of 0.75 and piezoelectric constant d33 of 650 pC/N are achieved in x = 0.43 ceramics with monoclinic C and tetragonal phases coexistence at room temperature. At 30℃, this composition ceramics sintered at 1260℃ shows the remnant polarization Pr and coercive field Ec are about 36.8 µC/cm2 and 8.2 kV/cm respectively. Moreover, as the temperature increases to 150℃, these values remain as high as 22.6 µC/cm2 and 5.7 kV/cm. In the temperature range of 30–230℃, the variation of k33 and d33 is about 24% and 25%. These high piezoelectric performance and superior temperature stability are related to the more complex domain structures caused by phase coexistence and larger grains with more stable domain structure due to internal stress. The former is beneficial in improving the piezoelectric properties, and the latter dominates the enhanced temperature stability.
- 1 July 2021
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (12) , 6254-6265
Optimized piezoelectric properties and temperature stability in PSN‐PMN‐PT by adjusting the phase structure and grain size
For relaxor ferroelectric materials, improving the piezoelectric properties and temperature stability simultaneously is still a great challenge up to now. In this work, the structure, electric properties, and thermal stability of xPSN‐(1 − x)PMN‐0.4PT (x = 0.15, 0.29, 0.43, and 0.5) ceramics were studied systematically by experiment and phase field simulation. A high Curie temperature Tc of 255℃ and good longitudinal electricmechanical coupling factor k33 of 0.75 and piezoelectric constant d33 of 650 pC/N are achieved in x = 0.43 ceramics with monoclinic C and tetragonal phases coexistence at room temperature. At 30℃, this composition ceramics sintered at 1260℃ shows the remnant polarization Pr and coercive field Ec are about 36.8 µC/cm2 and 8.2 kV/cm respectively. Moreover, as the temperature increases to 150℃, these values remain as high as 22.6 µC/cm2 and 5.7 kV/cm. In the temperature range of 30–230℃, the variation of k33 and d33 is about 24% and 25%. These high piezoelectric performance and superior temperature stability are related to the more complex domain structures caused by phase coexistence and larger grains with more stable domain structure due to internal stress. The former is beneficial in improving the piezoelectric properties, and the latter dominates the enhanced temperature stability.
- 2 January 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (3) , 2805-2813
BaBi4Ti4O15 ceramics: calcination temperature dependence of the phase formation and electrical properties
- 2 January 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (3) , 2805-2813
BaBi4Ti4O15 ceramics: calcination temperature dependence of the phase formation and electrical properties
- 1 August 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (18) , 15258-15266
Defect dipoles inducing the larger piezoelectric properties in BaBi4Ti4−x(Cu0.5W0.5)xO15 ceramics
- 1 August 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (18) , 15258-15266
Defect dipoles inducing the larger piezoelectric properties in BaBi4Ti4−x(Cu0.5W0.5)xO15 ceramics
- Open Access
Pb(Er1/2Nb1/2)O3–Pb(Zn1/3Nb2/3)O3–PbTiO3 Single Crystals with High Curie Temperature
In this work, 0.15Pb(Er1/2Nb1/2)O3–0.63Pb(Zn1/3Nb2/3)O3–0.22PbTiO3 (15PEN–63PZN–22PT) single crystals with a pure perovskite structure are obtained through the flux method. The phase structure, dielectric, ferroelectric properties and upconversion photoluminescence of the crystals are studied. The ternary crystals along the [110] orientation have a high Curie temperature (Tc = 250 °C) and large coercive field (Ec = 11.0597 kV/cm) which are higher than those of crystals reported previously. Furthermore, the PEN–PZN–PT crystals are produced with a strong green light excited by a 980 nm laser. Being in the range 298–478 K, the emission intensity of all peaks decreases with increase in temperature. The absolute quantum yield (QY) for the crystals is 0.00059%. These excellent properties provide new possibilities for multifunctional materials of optoelectronic devices.
Open AccessPb(Er1/2Nb1/2)O3–Pb(Zn1/3Nb2/3)O3–PbTiO3 Single Crystals with High Curie Temperature
In this work, 0.15Pb(Er1/2Nb1/2)O3–0.63Pb(Zn1/3Nb2/3)O3–0.22PbTiO3 (15PEN–63PZN–22PT) single crystals with a pure perovskite structure are obtained through the flux method. The phase structure, dielectric, ferroelectric properties and upconversion photoluminescence of the crystals are studied. The ternary crystals along the [110] orientation have a high Curie temperature (Tc = 250 °C) and large coercive field (Ec = 11.0597 kV/cm) which are higher than those of crystals reported previously. Furthermore, the PEN–PZN–PT crystals are produced with a strong green light excited by a 980 nm laser. Being in the range 298–478 K, the emission intensity of all peaks decreases with increase in temperature. The absolute quantum yield (QY) for the crystals is 0.00059%. These excellent properties provide new possibilities for multifunctional materials of optoelectronic devices.