Donghyun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Donghyun Kim has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
Luis Sentis
Aerospace Engineering and Engineering Mechanics, University of Texas, Austin, U.S.
8 shared publications- Junhyeok Ahn
Department of Mechanical Engineering The University of Texas at Austin USA
5 shared publications - Luis Sentis
The University of Texas at Austin, Austin, TX, USA
5 shared publications Gray Thomas
Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX, USA
4 shared publicationsShangqun Yu
4 shared publicationsYe Zhao
Agile Robotics Lab, SEAS, Harvard University, Cambridge, MA 02138, USA
4 shared publications
Latest Publications
- Open Access
- 16 March 2026
- Published by Association for Computing Machinery (ACM)
- p. 1129-1139
GuideNav: User-Informed Development of a Vision-Only Robotic Navigation Assistant for Blind Travelers
- 16 March 2026
- Published by Association for Computing Machinery (ACM)
- p. 1129-1139
Open AccessGuideNav: User-Informed Development of a Vision-Only Robotic Navigation Assistant for Blind Travelers
- Open Access
Strong, Accurate, and Low-Cost Robot Manipulator
This paper presents Forte, a fully 3D-printable, 6-DoF robotic arm designed to achieve near industrial-grade performance - 0.63 kg payload, 0.467 m reach, and sub-millimeter repeatability - at a material cost under $215. As an accessible robot for broad applications across classroom education to AI experiments, Forte pushes forward the performance limitations of existing low-cost educational arms. We introduce a cost-effective mechanical design that combines capstan-based cable drives, timing belts, simple tensioning mechanisms, and lightweight 3D-printed structures, along with topology optimization for structural stiffness. Through careful drivetrain engineering, we minimize backlash and maintain control fidelity without relying on high-power electronics or expensive manufacturing processes. Experimental validation demonstrates that Forte achieves high repeatability and load capacity, offering a compelling robotic platform for both classroom instruction and advanced robotics research.
Open AccessStrong, Accurate, and Low-Cost Robot Manipulator
This paper presents Forte, a fully 3D-printable, 6-DoF robotic arm designed to achieve near industrial-grade performance - 0.63 kg payload, 0.467 m reach, and sub-millimeter repeatability - at a material cost under $215. As an accessible robot for broad applications across classroom education to AI experiments, Forte pushes forward the performance limitations of existing low-cost educational arms. We introduce a cost-effective mechanical design that combines capstan-based cable drives, timing belts, simple tensioning mechanisms, and lightweight 3D-printed structures, along with topology optimization for structural stiffness. Through careful drivetrain engineering, we minimize backlash and maintain control fidelity without relying on high-power electronics or expensive manufacturing processes. Experimental validation demonstrates that Forte achieves high repeatability and load capacity, offering a compelling robotic platform for both classroom instruction and advanced robotics research.
- Open Access
A Biomechanics-Inspired Approach to Soccer Kicking for Humanoid Robots
Soccer kicking is a complex whole-body motion that requires intricate coordination of various motor actions. To accomplish such dynamic motion in a humanoid robot, the robot needs to simultaneously: 1) transfer high kinetic energy to the kicking leg, 2) maintain balance and stability of the entire body, and 3) manage the impact disturbance from the ball during the kicking moment. Prior studies on robotic soccer kicking often prioritized stability, leading to overly conservative quasi-static motions. In this work, we present a biomechanics-inspired control framework that leverages trajectory optimization and imitation learning to facilitate highly dynamic soccer kicks in humanoid robots. We conducted an in-depth analysis of human soccer kick biomechanics to identify key motion constraints. Based on this understanding, we designed kinodynamically feasible trajectories that are then used as a reference in imitation learning to develop a robust feedback control policy. We demonstrate the effectiveness of our approach through a simulation of an anthropomorphic 25 DoF bipedal humanoid robot, named PresToe, which is equipped with 7 DoF legs, including a unique actuated toe. Using our framework, PresToe can execute dynamic instep kicks, propelling the ball at speeds exceeding 11m/s in full dynamics simulation.
Open AccessA Biomechanics-Inspired Approach to Soccer Kicking for Humanoid Robots
Soccer kicking is a complex whole-body motion that requires intricate coordination of various motor actions. To accomplish such dynamic motion in a humanoid robot, the robot needs to simultaneously: 1) transfer high kinetic energy to the kicking leg, 2) maintain balance and stability of the entire body, and 3) manage the impact disturbance from the ball during the kicking moment. Prior studies on robotic soccer kicking often prioritized stability, leading to overly conservative quasi-static motions. In this work, we present a biomechanics-inspired control framework that leverages trajectory optimization and imitation learning to facilitate highly dynamic soccer kicks in humanoid robots. We conducted an in-depth analysis of human soccer kick biomechanics to identify key motion constraints. Based on this understanding, we designed kinodynamically feasible trajectories that are then used as a reference in imitation learning to develop a robust feedback control policy. We demonstrate the effectiveness of our approach through a simulation of an anthropomorphic 25 DoF bipedal humanoid robot, named PresToe, which is equipped with 7 DoF legs, including a unique actuated toe. Using our framework, PresToe can execute dynamic instep kicks, propelling the ball at speeds exceeding 11m/s in full dynamics simulation.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9  (10) , 8999-9006
CEAR: Comprehensive Event Camera Dataset for Rapid Perception of Agile Quadruped Robots
When legged robots perform agile movements, traditional RGB cameras often produce blurred images, posing a challenge for rapid perception. Event cameras have emerged as a promising solution for capturing rapid perception and coping with challenging lighting conditions thanks to their low latency, high temporal resolution, and high dynamic range. However, integrating event cameras into agile-legged robots is still largely unexplored. To bridge this gap, we introduce CEAR, a dataset comprising data from an event camera, an RGB-D camera, an IMU, a LiDAR, and joint encoders, all mounted on a dynamic quadruped, Mini Cheetah robot. This comprehensive dataset features more than 100 sequences from real-world environments, encompassing various indoor and outdoor environments, different lighting conditions, a range of robot gaits (e.g., trotting, bounding, pronking), as well as acrobatic movements like backflip. To our knowledge, this is the first event camera dataset capturing the dynamic and diverse quadruped robot motions under various setups, developed to advance research in rapid perception for quadruped robots.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9  (10) , 8999-9006
CEAR: Comprehensive Event Camera Dataset for Rapid Perception of Agile Quadruped Robots
When legged robots perform agile movements, traditional RGB cameras often produce blurred images, posing a challenge for rapid perception. Event cameras have emerged as a promising solution for capturing rapid perception and coping with challenging lighting conditions thanks to their low latency, high temporal resolution, and high dynamic range. However, integrating event cameras into agile-legged robots is still largely unexplored. To bridge this gap, we introduce CEAR, a dataset comprising data from an event camera, an RGB-D camera, an IMU, a LiDAR, and joint encoders, all mounted on a dynamic quadruped, Mini Cheetah robot. This comprehensive dataset features more than 100 sequences from real-world environments, encompassing various indoor and outdoor environments, different lighting conditions, a range of robot gaits (e.g., trotting, bounding, pronking), as well as acrobatic movements like backflip. To our knowledge, this is the first event camera dataset capturing the dynamic and diverse quadruped robot motions under various setups, developed to advance research in rapid perception for quadruped robots.
- Top Cited PapersOpen Access
- 11 May 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-20
Towards Robotic Companions: Understanding Handler-Guide Dog Interactions for Informed Guide Dog Robot Design
Dog guides are favored by blind and low-vision (BLV) individuals for their ability to enhance independence and confidence by reducing safety concerns and increasing navigation efficiency compared to traditional mobility aids. However, only a relatively small proportion of BLV individuals work with dog guides due to their limited availability and associated maintenance responsibilities. There is considerable recent interest in addressing this challenge by developing legged guide dog robots. This study was designed to determine critical aspects of the handler-guide dog interaction and better understand handler needs to inform guide dog robot development. We conducted semi-structured interviews and observation sessions with 23 dog guide handlers and 5 trainers. Thematic analysis revealed critical limitations in guide dog work, desired personalization in handler-guide dog interaction, and important perspectives on future guide dog robots. Grounded on these findings, we discuss pivotal design insights for guide dog robots aimed for adoption within the BLV community.
- 11 May 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-20
Top Cited PapersOpen AccessTowards Robotic Companions: Understanding Handler-Guide Dog Interactions for Informed Guide Dog Robot Design
Dog guides are favored by blind and low-vision (BLV) individuals for their ability to enhance independence and confidence by reducing safety concerns and increasing navigation efficiency compared to traditional mobility aids. However, only a relatively small proportion of BLV individuals work with dog guides due to their limited availability and associated maintenance responsibilities. There is considerable recent interest in addressing this challenge by developing legged guide dog robots. This study was designed to determine critical aspects of the handler-guide dog interaction and better understand handler needs to inform guide dog robot development. We conducted semi-structured interviews and observation sessions with 23 dog guide handlers and 5 trainers. Thematic analysis revealed critical limitations in guide dog work, desired personalization in handler-guide dog interaction, and important perspectives on future guide dog robots. Grounded on these findings, we discuss pivotal design insights for guide dog robots aimed for adoption within the BLV community.
- Open Access
Impedance Matching: Enabling an RL-Based Running Jump in a Quadruped Robot
Replicating the remarkable athleticism seen in animals has long been a challenge in robotics control. Although Reinforcement Learning (RL) has demonstrated significant progress in dynamic legged locomotion control, the substantial sim-to-real gap often hinders the real-world demonstration of truly dynamic movements. We propose a new framework to mitigate this gap through frequency-domain analysis-based impedance matching between simulated and real robots. Our framework offers a structured guideline for parameter selection and the range for dynamics randomization in simulation, thus facilitating a safe sim-to-real transfer. The learned policy using our framework enabled jumps across distances of 55 cm and heights of 38 cm. The results are, to the best of our knowledge, one of the highest and longest running jumps demonstrated by an RL-based control policy in a real quadruped robot. Note that the achieved jumping height is approximately 85% of that obtained from a state-of-the-art trajectory optimization method, which can be seen as the physical limit for the given robot hardware. In addition, our control policy accomplished stable walking at speeds up to 2 m/s in the forward and backward directions, and 1 m/s in the sideway direction.
Open AccessImpedance Matching: Enabling an RL-Based Running Jump in a Quadruped Robot
Replicating the remarkable athleticism seen in animals has long been a challenge in robotics control. Although Reinforcement Learning (RL) has demonstrated significant progress in dynamic legged locomotion control, the substantial sim-to-real gap often hinders the real-world demonstration of truly dynamic movements. We propose a new framework to mitigate this gap through frequency-domain analysis-based impedance matching between simulated and real robots. Our framework offers a structured guideline for parameter selection and the range for dynamics randomization in simulation, thus facilitating a safe sim-to-real transfer. The learned policy using our framework enabled jumps across distances of 55 cm and heights of 38 cm. The results are, to the best of our knowledge, one of the highest and longest running jumps demonstrated by an RL-based control policy in a real quadruped robot. Note that the achieved jumping height is approximately 85% of that obtained from a state-of-the-art trajectory optimization method, which can be seen as the physical limit for the given robot hardware. In addition, our control policy accomplished stable walking at speeds up to 2 m/s in the forward and backward directions, and 1 m/s in the sideway direction.
- Open Access
StaccaToe: A Single-Leg Robot that Mimics the Human Leg and Toe
We introduce StaccaToe, a human-scale, electric motor-powered single-leg robot designed to rival the agility of human locomotion through two distinctive attributes: an actuated toe and a co-actuation configuration inspired by the human leg. Leveraging the foundational design of HyperLeg's lower leg mechanism, we develop a stand-alone robot by incorporating new link designs, custom-designed power electronics, and a refined control system. Unlike previous jumping robots that rely on either special mechanisms (e.g., springs and clutches) or hydraulic/pneumatic actuators, StaccaToe employs electric motors without energy storage mechanisms. This choice underscores our ultimate goal of developing a practical, high-performance humanoid robot capable of human-like, stable walking as well as explosive dynamic movements. In this paper, we aim to empirically evaluate the balance capability and the exertion of explosive ground reaction forces of our toe and co-actuation mechanisms. Throughout extensive hardware and controller development, StaccaToe showcases its control fidelity by demonstrating a balanced tip-toe stance and dynamic jump. This study is significant for three key reasons: 1) StaccaToe represents the first human-scale, electric motor-driven single-leg robot to execute dynamic maneuvers without relying on specialized mechanisms; 2) our research provides empirical evidence of the benefits of replicating critical human leg attributes in robotic design; and 3) we explain the design process for creating agile legged robots, the details that have been scantily covered in academic literature.
Open AccessStaccaToe: A Single-Leg Robot that Mimics the Human Leg and Toe
We introduce StaccaToe, a human-scale, electric motor-powered single-leg robot designed to rival the agility of human locomotion through two distinctive attributes: an actuated toe and a co-actuation configuration inspired by the human leg. Leveraging the foundational design of HyperLeg's lower leg mechanism, we develop a stand-alone robot by incorporating new link designs, custom-designed power electronics, and a refined control system. Unlike previous jumping robots that rely on either special mechanisms (e.g., springs and clutches) or hydraulic/pneumatic actuators, StaccaToe employs electric motors without energy storage mechanisms. This choice underscores our ultimate goal of developing a practical, high-performance humanoid robot capable of human-like, stable walking as well as explosive dynamic movements. In this paper, we aim to empirically evaluate the balance capability and the exertion of explosive ground reaction forces of our toe and co-actuation mechanisms. Throughout extensive hardware and controller development, StaccaToe showcases its control fidelity by demonstrating a balanced tip-toe stance and dynamic jump. This study is significant for three key reasons: 1) StaccaToe represents the first human-scale, electric motor-driven single-leg robot to execute dynamic maneuvers without relying on specialized mechanisms; 2) our research provides empirical evidence of the benefits of replicating critical human leg attributes in robotic design; and 3) we explain the design process for creating agile legged robots, the details that have been scantily covered in academic literature.
- Open Access
Integration of Riemannian Motion Policy with Whole-Body Control for Collision-Free Legged Locomotion
In this paper, we present a Riemannian Motion Policy (RMP)flow-based whole-body control framework for improved dynamic legged locomotion. RMPflow is a differential geometry-inspired algorithm for fusing multiple task-space policies (RMPs) into a configuration space policy in a geometrically consistent manner. RMP-based approaches are especially suited for designing simultaneous tracking and collision avoidance behaviors and have been successfully deployed on serial manipulators. However, one caveat of RMPflow is that it is designed with fully actuated systems in mind. In this work, we, for the first time, extend it to the domain of dynamic-legged systems, which have unforgiving under-actuation and limited control input. Thorough push recovery experiments are conducted in simulation to validate the overall framework. We show that expanding the valid stepping region with an RMP-based collision-avoidance swing leg controller improves balance robustness against external disturbances by up to 53\% compared to a baseline approach using a restricted stepping region. Furthermore, a point-foot biped robot is purpose-built for experimental studies of dynamic biped locomotion. A preliminary unassisted in-place stepping experiment is conducted to show the viability of the control framework and hardware.
Open AccessIntegration of Riemannian Motion Policy with Whole-Body Control for Collision-Free Legged Locomotion
In this paper, we present a Riemannian Motion Policy (RMP)flow-based whole-body control framework for improved dynamic legged locomotion. RMPflow is a differential geometry-inspired algorithm for fusing multiple task-space policies (RMPs) into a configuration space policy in a geometrically consistent manner. RMP-based approaches are especially suited for designing simultaneous tracking and collision avoidance behaviors and have been successfully deployed on serial manipulators. However, one caveat of RMPflow is that it is designed with fully actuated systems in mind. In this work, we, for the first time, extend it to the domain of dynamic-legged systems, which have unforgiving under-actuation and limited control input. Thorough push recovery experiments are conducted in simulation to validate the overall framework. We show that expanding the valid stepping region with an RMP-based collision-avoidance swing leg controller improves balance robustness against external disturbances by up to 53\% compared to a baseline approach using a restricted stepping region. Furthermore, a point-foot biped robot is purpose-built for experimental studies of dynamic biped locomotion. A preliminary unassisted in-place stepping experiment is conducted to show the viability of the control framework and hardware.
- Open Access
Event Camera-based Visual Odometry for Dynamic Motion Tracking of a Legged Robot Using Adaptive Time Surface
Our paper proposes a direct sparse visual odometry method that combines event and RGB-D data to estimate the pose of agile-legged robots during dynamic locomotion and acrobatic behaviors. Event cameras offer high temporal resolution and dynamic range, which can eliminate the issue of blurred RGB images during fast movements. This unique strength holds a potential for accurate pose estimation of agile-legged robots, which has been a challenging problem to tackle. Our framework leverages the benefits of both RGB-D and event cameras to achieve robust and accurate pose estimation, even during dynamic maneuvers such as jumping and landing a quadruped robot, the Mini-Cheetah. Our major contributions are threefold: Firstly, we introduce an adaptive time surface (ATS) method that addresses the whiteout and blackout issue in conventional time surfaces by formulating pixel-wise decay rates based on scene complexity and motion speed. Secondly, we develop an effective pixel selection method that directly samples from event data and applies sample filtering through ATS, enabling us to pick pixels on distinct features. Lastly, we propose a nonlinear pose optimization formula that simultaneously performs 3D-2D alignment on both RGB-based and event-based maps and images, allowing the algorithm to fully exploit the benefits of both data streams. We extensively evaluate the performance of our framework on both public datasets and our own quadruped robot dataset, demonstrating its effectiveness in accurately estimating the pose of agile robots during dynamic movements.
Open AccessEvent Camera-based Visual Odometry for Dynamic Motion Tracking of a Legged Robot Using Adaptive Time Surface
Our paper proposes a direct sparse visual odometry method that combines event and RGB-D data to estimate the pose of agile-legged robots during dynamic locomotion and acrobatic behaviors. Event cameras offer high temporal resolution and dynamic range, which can eliminate the issue of blurred RGB images during fast movements. This unique strength holds a potential for accurate pose estimation of agile-legged robots, which has been a challenging problem to tackle. Our framework leverages the benefits of both RGB-D and event cameras to achieve robust and accurate pose estimation, even during dynamic maneuvers such as jumping and landing a quadruped robot, the Mini-Cheetah. Our major contributions are threefold: Firstly, we introduce an adaptive time surface (ATS) method that addresses the whiteout and blackout issue in conventional time surfaces by formulating pixel-wise decay rates based on scene complexity and motion speed. Secondly, we develop an effective pixel selection method that directly samples from event data and applies sample filtering through ATS, enabling us to pick pixels on distinct features. Lastly, we propose a nonlinear pose optimization formula that simultaneously performs 3D-2D alignment on both RGB-based and event-based maps and images, allowing the algorithm to fully exploit the benefits of both data streams. We extensively evaluate the performance of our framework on both public datasets and our own quadruped robot dataset, demonstrating its effectiveness in accurately estimating the pose of agile robots during dynamic movements.
- 26 January 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 7  (62) , eabn6798
Quadruped robots venture into the wild with open eyes
Perception-based locomotion learning accelerates the real-world deployment of quadruped robots.
- 26 January 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 7  (62) , eabn6798
Quadruped robots venture into the wild with open eyes
Perception-based locomotion learning accelerates the real-world deployment of quadruped robots.