Alexei A. Zakharov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexei A. Zakharov has a total of 173 co-authors. Here are the top co-authors by number of shared publications:
- Camilla Coletti
Center for Nanotechnology Innovation @ NEST, Istituto Italiano di Technologia, Piazza San Silvestro 12, 56127 Pisa, Italy
5 shared publications Claudia Struzzi
5 shared publicationsRositsa Yakimova
5 shared publicationsYuran Niu
MAX IV Laboratory Lund University Lund Sweden
5 shared publications- Christoph Tegenkamp
Institut für Physik, Technische Universität Chemnitz, Reichenhainer Str. 70, 09126 Chemnitz, Germany
4 shared publications - Stiven Forti
Center for Nanotechnology Innovation @NEST Istituto Italiano di Tecnologia Pisa Italy
4 shared publications
Latest Publications
- Open Access
- 27 August 2026
- Published by Elsevier in SSRN Electronic Journal
Surface reconstruction governs graphene epitaxy on sapphire
The direct growth of single-crystal graphene on dielectric substrates is highly appealing for semiconductor technologies, particularly in optoelectronics. Sapphire (α- Al₂O₃(0001), c-plane) is a platform holding great promise, yet graphene growth on this surface remains poorly understood and often results in rotational disorder and mosaicity. A key source of ambiguity is that the role of the surface reconstruction, ubiquitous under growth conditions, is often overlooked. In this work, we provide experimental and theoretical results that clearly indicate how graphene epitaxy on sapphire is governed by the reconstructed interface. Specifically, we show that two low-strain commensurate configurations of graphene on the most stable surface reconstruction under growth conditions, the (√31×√31)R±9°, account for the majority of experimentally observed domains. We further suggest an alternative interpretation in which the frequently observed R30 orientation may emerge from the convolution of nearby commensurate domains, yielding a unified picture of graphene growth on sapphire. Our results highlight interface control as the key requirement for achieving flat, strain-free graphene with epitaxially constrained orientations on sapphire, and establish a consistent framework to interpret the observed graphene aligned R30 with respect to the sapphire (1×1), as well as its distributed mosaicity.
- 27 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSurface reconstruction governs graphene epitaxy on sapphire
The direct growth of single-crystal graphene on dielectric substrates is highly appealing for semiconductor technologies, particularly in optoelectronics. Sapphire (α- Al₂O₃(0001), c-plane) is a platform holding great promise, yet graphene growth on this surface remains poorly understood and often results in rotational disorder and mosaicity. A key source of ambiguity is that the role of the surface reconstruction, ubiquitous under growth conditions, is often overlooked. In this work, we provide experimental and theoretical results that clearly indicate how graphene epitaxy on sapphire is governed by the reconstructed interface. Specifically, we show that two low-strain commensurate configurations of graphene on the most stable surface reconstruction under growth conditions, the (√31×√31)R±9°, account for the majority of experimentally observed domains. We further suggest an alternative interpretation in which the frequently observed R30 orientation may emerge from the convolution of nearby commensurate domains, yielding a unified picture of graphene growth on sapphire. Our results highlight interface control as the key requirement for achieving flat, strain-free graphene with epitaxially constrained orientations on sapphire, and establish a consistent framework to interpret the observed graphene aligned R30 with respect to the sapphire (1×1), as well as its distributed mosaicity.
- Open Access
- 9 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (15) , e19087
Facet‐Selective Electrostatic Assembling of 2D MXene onto Anisotropic Single‐Crystal Metal Oxides for Enhanced Photocatalysis
Designing composite photocatalytic systems with nanoscale precision is crucial. While conventional facet‐selective photo‐deposition successfully utilizes spherical co‐catalysts, the directed deposition of pre‐synthesized two‐dimensional (2D) materials onto specific facets remains extremely challenging. This work demonstrates an electrostatic assembly strategy for the precise deposition of 2D transition metal carbides (MXenes) onto anisotropic single‐crystal semiconducting metal oxides. By precisely controlling the solution pH, we modulated the surface charge of the MXenes and the distinct crystallographic facets of the metal oxides, enabling selective deposition driven by electrostatic attraction. Negatively charged Mo 4/3 C MXenes were selectively deposited on the electron‐rich (101) surface of TiO 2 at pH 3, the (100) surface of Cu 2 O exposed at pH 11, and the (010) surface of BiVO 4 at pH 1.5. The high facet selectivity was confirmed through a combination of advanced techniques, including electron microscopy, electron spectroscopy, and synchrotron‐based spectromicroscopy. This selective interfacial engineering promotes spatially separated charge carrier migration toward distinct facets, while Schottky barriers form at the MXenes/oxides interfaces. The MXenes act as efficient reduction co‐catalysts, facilitating the rapid consumption of electrons, thereby enhancing photocatalytic hydrogen evolution. This work establishes a generalizable, non‐photolytic method for integrating challenging 2D co‐catalysts with facet‐engineered semiconductors for designing composite photocatalysts.
- 9 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (15) , e19087
Open AccessFacet‐Selective Electrostatic Assembling of 2D MXene onto Anisotropic Single‐Crystal Metal Oxides for Enhanced Photocatalysis
Designing composite photocatalytic systems with nanoscale precision is crucial. While conventional facet‐selective photo‐deposition successfully utilizes spherical co‐catalysts, the directed deposition of pre‐synthesized two‐dimensional (2D) materials onto specific facets remains extremely challenging. This work demonstrates an electrostatic assembly strategy for the precise deposition of 2D transition metal carbides (MXenes) onto anisotropic single‐crystal semiconducting metal oxides. By precisely controlling the solution pH, we modulated the surface charge of the MXenes and the distinct crystallographic facets of the metal oxides, enabling selective deposition driven by electrostatic attraction. Negatively charged Mo 4/3 C MXenes were selectively deposited on the electron‐rich (101) surface of TiO 2 at pH 3, the (100) surface of Cu 2 O exposed at pH 11, and the (010) surface of BiVO 4 at pH 1.5. The high facet selectivity was confirmed through a combination of advanced techniques, including electron microscopy, electron spectroscopy, and synchrotron‐based spectromicroscopy. This selective interfacial engineering promotes spatially separated charge carrier migration toward distinct facets, while Schottky barriers form at the MXenes/oxides interfaces. The MXenes act as efficient reduction co‐catalysts, facilitating the rapid consumption of electrons, thereby enhancing photocatalytic hydrogen evolution. This work establishes a generalizable, non‐photolytic method for integrating challenging 2D co‐catalysts with facet‐engineered semiconductors for designing composite photocatalysts.
- Open Access
- 6 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (32) , 29405-29415
Oxygen Vacancy Dynamics in Different Switching Modes of Hf0.5Zr0.5O2−δ
HfO2, one of the most common materials in resistive switching devices, can stabilize in a ferroelectric orthorhombic phase, enabling two nonvolatile polarization states via oxygen displacement in the unit cell. Under certain conditions, ferroelectric and resistive switching can coexist, independently addressable, within one device. This study employs operando spectroscopic analysis to elucidate the role of oxygen in both switching processes. A conductive filament is identified through a local valence change at the oxide surface via X-ray Photoelectron Emission Microscopy, allowing vacancy density and filament diameter evaluation. This provides well-founded experimental evidence of a conductive filament in orthorhombic Hf0.5Zr0.5O2-δ (HZO) in application-relevant device geometry. Depth-dependent changes in the electronic signature of HZO and La0.8Sr0.2MnO3-δ (LSMO) with ferroelectric field cycling are identified by Hard X-ray Photoelectron Spectroscopy. Polarization-dependent shifts in the Hf core level align with the oxygen vacancy migration during ferroelectric switching. Fatigue-related vacancy generation causes an inhomogeneous reduction that does not propagate into the bottom electrode and extended domain pinning at the HZO/LSMO interface. This highlights the importance of interface engineering for the ferroelectric performance and of the oxygen affinity of the bottom electrode for both switching regimes.
- 6 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (32) , 29405-29415
Open AccessOxygen Vacancy Dynamics in Different Switching Modes of Hf0.5Zr0.5O2−δ
HfO2, one of the most common materials in resistive switching devices, can stabilize in a ferroelectric orthorhombic phase, enabling two nonvolatile polarization states via oxygen displacement in the unit cell. Under certain conditions, ferroelectric and resistive switching can coexist, independently addressable, within one device. This study employs operando spectroscopic analysis to elucidate the role of oxygen in both switching processes. A conductive filament is identified through a local valence change at the oxide surface via X-ray Photoelectron Emission Microscopy, allowing vacancy density and filament diameter evaluation. This provides well-founded experimental evidence of a conductive filament in orthorhombic Hf0.5Zr0.5O2-δ (HZO) in application-relevant device geometry. Depth-dependent changes in the electronic signature of HZO and La0.8Sr0.2MnO3-δ (LSMO) with ferroelectric field cycling are identified by Hard X-ray Photoelectron Spectroscopy. Polarization-dependent shifts in the Hf core level align with the oxygen vacancy migration during ferroelectric switching. Fatigue-related vacancy generation causes an inhomogeneous reduction that does not propagate into the bottom electrode and extended domain pinning at the HZO/LSMO interface. This highlights the importance of interface engineering for the ferroelectric performance and of the oxygen affinity of the bottom electrode for both switching regimes.
- Open Access
- 20 March 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (11)
Reply to “Comment on “Diamond (111) surface reconstruction and epitaxial graphene interface””
In the Comment by Goletti [], concerns are raised regarding the interpretation of our experimental findings, as well as the application of basic ground-state density functional theory (DFT) models pertaining to the C ( 111 ) − ( 2 × 1 ) surface presented in our earlier publication [Reed , ]. These concerns are addressed and our interpretation of the results is ultimately reconfirmed. We present further analysis of the original data and introduce new measurements on previously unreported regions of the surface reconstructed ( 2 × 1 ) Brillouin zone, aiding in the evaluation of the dispersion relation at other high-symmetry points. We gain insights relating to the current use of DFT calculations that include many-body theories when relating to the occupied electronic structure of this surface as measured by angle-resolved photoelectron spectroscopy.
- 20 March 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (11)
Open AccessReply to “Comment on “Diamond (111) surface reconstruction and epitaxial graphene interface””
In the Comment by Goletti [], concerns are raised regarding the interpretation of our experimental findings, as well as the application of basic ground-state density functional theory (DFT) models pertaining to the C ( 111 ) − ( 2 × 1 ) surface presented in our earlier publication [Reed , ]. These concerns are addressed and our interpretation of the results is ultimately reconfirmed. We present further analysis of the original data and introduce new measurements on previously unreported regions of the surface reconstructed ( 2 × 1 ) Brillouin zone, aiding in the evaluation of the dispersion relation at other high-symmetry points. We gain insights relating to the current use of DFT calculations that include many-body theories when relating to the occupied electronic structure of this surface as measured by angle-resolved photoelectron spectroscopy.
- Open Access
- 4 February 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 35, 3322-3332
Enhanced characterization of non-metallic inclusions in ultra-high-strength steels using advanced synchrotron-based X-ray absorption spectroscopy and chemometric analysis
- 4 February 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 35, 3322-3332
Open AccessEnhanced characterization of non-metallic inclusions in ultra-high-strength steels using advanced synchrotron-based X-ray absorption spectroscopy and chemometric analysis
- Top Cited PapersOpen Access
- 11 December 2024
- Published by Springer Nature in Nature
- Vol. 636 (8042) , 348-353
Nanoscale imaging and control of altermagnetism in MnTe
Nanoscale detection and control of the magnetic order underpins a spectrum of condensed-matter research and device functionalities involving magnetism. The key principle involved is the breaking of time-reversal symmetry, which in ferromagnets is generated by an internal magnetization. However, the presence of a net magnetization limits device scalability and compatibility with phases, such as superconductors and topological insulators. Recently, altermagnetism has been proposed as a solution to these restrictions, as it shares the enabling time-reversal-symmetry-breaking characteristic of ferromagnetism, combined with the antiferromagnetic-like vanishing net magnetization1–4. So far, altermagnetic ordering has been inferred from spatially averaged probes4–19. Here we demonstrate nanoscale imaging of altermagnetic states from 100-nanometre-scale vortices and domain walls to 10-micrometre-scale single-domain states in manganese telluride (MnTe)2,7,9,14–16,18,20,21. We combine the time-reversal-symmetry-breaking sensitivity of X-ray magnetic circular dichroism12 with magnetic linear dichroism and photoemission electron microscopy to achieve maps of the local altermagnetic ordering vector. A variety of spin configurations are imposed using microstructure patterning and thermal cycling in magnetic fields. The demonstrated detection and controlled formation of altermagnetic spin configurations paves the way for future experimental studies across the theoretically predicted research landscape of altermagnetism, including unconventional spin-polarization phenomena, the interplay of altermagnetism with superconducting and topological phases, and highly scalable digital and neuromorphic spintronic devices3,14,22–24.
- 11 December 2024
- Published by Springer Nature in Nature
- Vol. 636 (8042) , 348-353
Top Cited PapersOpen AccessNanoscale imaging and control of altermagnetism in MnTe
Nanoscale detection and control of the magnetic order underpins a spectrum of condensed-matter research and device functionalities involving magnetism. The key principle involved is the breaking of time-reversal symmetry, which in ferromagnets is generated by an internal magnetization. However, the presence of a net magnetization limits device scalability and compatibility with phases, such as superconductors and topological insulators. Recently, altermagnetism has been proposed as a solution to these restrictions, as it shares the enabling time-reversal-symmetry-breaking characteristic of ferromagnetism, combined with the antiferromagnetic-like vanishing net magnetization1–4. So far, altermagnetic ordering has been inferred from spatially averaged probes4–19. Here we demonstrate nanoscale imaging of altermagnetic states from 100-nanometre-scale vortices and domain walls to 10-micrometre-scale single-domain states in manganese telluride (MnTe)2,7,9,14–16,18,20,21. We combine the time-reversal-symmetry-breaking sensitivity of X-ray magnetic circular dichroism12 with magnetic linear dichroism and photoemission electron microscopy to achieve maps of the local altermagnetic ordering vector. A variety of spin configurations are imposed using microstructure patterning and thermal cycling in magnetic fields. The demonstrated detection and controlled formation of altermagnetic spin configurations paves the way for future experimental studies across the theoretically predicted research landscape of altermagnetism, including unconventional spin-polarization phenomena, the interplay of altermagnetism with superconducting and topological phases, and highly scalable digital and neuromorphic spintronic devices3,14,22–24.
- Open Access
- 6 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (16) , 18094-18105
Heterocontact-Triggered 1H to 1T′ Phase Transition in CVD-Grown Monolayer MoTe2: Implications for Low Contact Resistance Electronic Devices
- 6 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (16) , 18094-18105
Open AccessHeterocontact-Triggered 1H to 1T′ Phase Transition in CVD-Grown Monolayer MoTe2: Implications for Low Contact Resistance Electronic Devices
- Open Access
- 3 February 2023
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 30 (2) , 468-478
MAXPEEM: a spectromicroscopy beamline at MAX IV laboratory
MAXPEEM, a dedicated photoemission electron microscopy beamline at MAX IV Laboratory, houses a state-of-the-art aberration-corrected spectroscopic photoemission and low-energy electron microscope (AC-SPELEEM). This powerful instrument offers a wide range of complementary techniques providing structural, chemical and magnetic sensitivities with a single-digit nanometre spatial resolution. The beamline can deliver a high photon flux of ≥1015 photons s−1 (0.1% bandwidth)−1 in the range 30–1200 eV with full control of the polarization from an elliptically polarized undulator. The microscope has several features which make it unique from similar instruments. The X-rays from the synchrotron pass through the first beam separator and impinge the surface at normal incidence. The microscope is equipped with an energy analyzer and an aberration corrector which improves both the resolution and the transmission compared with standard microscopes. A new fiber-coupled CMOS camera features an improved modulation transfer function, dynamic range and signal-to-noise ratio compared with the traditional MCP-CCD detection system.
- 3 February 2023
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 30 (2) , 468-478
Open AccessMAXPEEM: a spectromicroscopy beamline at MAX IV laboratory
MAXPEEM, a dedicated photoemission electron microscopy beamline at MAX IV Laboratory, houses a state-of-the-art aberration-corrected spectroscopic photoemission and low-energy electron microscope (AC-SPELEEM). This powerful instrument offers a wide range of complementary techniques providing structural, chemical and magnetic sensitivities with a single-digit nanometre spatial resolution. The beamline can deliver a high photon flux of ≥1015 photons s−1 (0.1% bandwidth)−1 in the range 30–1200 eV with full control of the polarization from an elliptically polarized undulator. The microscope has several features which make it unique from similar instruments. The X-rays from the synchrotron pass through the first beam separator and impinge the surface at normal incidence. The microscope is equipped with an energy analyzer and an aberration corrector which improves both the resolution and the transmission compared with standard microscopes. A new fiber-coupled CMOS camera features an improved modulation transfer function, dynamic range and signal-to-noise ratio compared with the traditional MCP-CCD detection system.
- Open Access
- 22 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (12) , 17919-17927
Atomic Hydrogen Annealing of Graphene on InAs Surfaces and Nanowires: Interface and Morphology Control for Optoelectronics and Quantum Technologies
- 22 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (12) , 17919-17927
Open AccessAtomic Hydrogen Annealing of Graphene on InAs Surfaces and Nanowires: Interface and Morphology Control for Optoelectronics and Quantum Technologies
- Open Access
- 29 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2229
Understanding of the Electrochemical Behavior of Lithium at Bilayer-Patched Epitaxial Graphene/4H-SiC
Novel two-dimensional materials (2DMs) with balanced electrical conductivity and lithium (Li) storage capacity are desirable for next-generation rechargeable batteries as they may serve as high-performance anodes, improving output battery characteristics. Gaining an advanced understanding of the electrochemical behavior of lithium at the electrode surface and the changes in interior structure of 2DM-based electrodes caused by lithiation is a key component in the long-term process of the implementation of new electrodes into to a realistic device. Here, we showcase the advantages of bilayer-patched epitaxial graphene on 4H-SiC (0001) as a possible anode material in lithium-ion batteries. The presence of bilayer graphene patches is beneficial for the overall lithiation process because it results in enhanced quantum capacitance of the electrode and provides extra intercalation paths. By performing cyclic voltammetry and chronoamperometry measurements, we shed light on the redox behavior of lithium at the bilayer-patched epitaxial graphene electrode and find that the early-stage growth of lithium is governed by the instantaneous nucleation mechanism. The results also demonstrate the fast lithium-ion transport (~4.7–5.6 × 10−7 cm2∙s−1) to the bilayer-patched epitaxial graphene electrode. Raman measurements complemented by in-depth statistical analysis and density functional theory calculations enable us to comprehend the lithiation effect on the properties of bilayer-patched epitaxial graphene and ascribe the lithium intercalation-induced Raman G peak splitting to the disparity between graphene layers. The current results are helpful for further advancement of the design of graphene-based electrodes with targeted performance.
- 29 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2229
Open AccessUnderstanding of the Electrochemical Behavior of Lithium at Bilayer-Patched Epitaxial Graphene/4H-SiC
Novel two-dimensional materials (2DMs) with balanced electrical conductivity and lithium (Li) storage capacity are desirable for next-generation rechargeable batteries as they may serve as high-performance anodes, improving output battery characteristics. Gaining an advanced understanding of the electrochemical behavior of lithium at the electrode surface and the changes in interior structure of 2DM-based electrodes caused by lithiation is a key component in the long-term process of the implementation of new electrodes into to a realistic device. Here, we showcase the advantages of bilayer-patched epitaxial graphene on 4H-SiC (0001) as a possible anode material in lithium-ion batteries. The presence of bilayer graphene patches is beneficial for the overall lithiation process because it results in enhanced quantum capacitance of the electrode and provides extra intercalation paths. By performing cyclic voltammetry and chronoamperometry measurements, we shed light on the redox behavior of lithium at the bilayer-patched epitaxial graphene electrode and find that the early-stage growth of lithium is governed by the instantaneous nucleation mechanism. The results also demonstrate the fast lithium-ion transport (~4.7–5.6 × 10−7 cm2∙s−1) to the bilayer-patched epitaxial graphene electrode. Raman measurements complemented by in-depth statistical analysis and density functional theory calculations enable us to comprehend the lithiation effect on the properties of bilayer-patched epitaxial graphene and ascribe the lithium intercalation-induced Raman G peak splitting to the disparity between graphene layers. The current results are helpful for further advancement of the design of graphene-based electrodes with targeted performance.