EZErica Zeglio

Erica Zeglio

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erica Zeglio has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    From Sourcing to End‐of‐Life: Sustainability Challenges and Opportunities in Organic Bioelectronics

    by Gwennaël Dufil, Marine Batista, Andrea Bionda, Erica Zeglio

    The field of organic bioelectronics carries tremendous expectations, driven by the unique possibilities offered by conjugated polymers. These materials promise high‐resolution biological signal transduction, seamless integration with living tissues, ease of processing, and virtually unlimited opportunities for molecular design. Yet, at a time of growing ecological crisis, technological advances must be accompanied by critical reflection on material sourcing, use, waste generation, and mitigation strategies. This perspective addresses sustainability across the full lifecycle of organic bioelectronic materials and devices, providing a foundation for researchers seeking more sustainable alternatives in their work. It examines the sourcing of conjugated polymers, weighing the benefits and limitations of current synthetic routes, greener alternatives, solvents, and monomers in light of sustainability considerations. Moving to device fabrication, it assesses current practices and identifies opportunities for less energy‐ and solvent‐intensive, scalable, and more material‐efficient processes. It further considers present and emerging applications where organic bioelectronics has the potential to provide a positive contribution to sustainability and emphasizes biosafety as well as regulatory challenges they face as the field expands. Finally, device end‐of‐life scenarios are discussed, surveying degradable materials and systems and proposing clearer definitions and standards to align terminology and guide the community toward a shared direction.

  • Open Access

    Adsorption of conducting polymer to high-surface-area nanoengineered cellulose fibers to facilitate rapid fabrication of highly conductive papers

    by Nüzhet Inci Kilic, Johanna Sjölund, Yunfan Lin, Marica Muccini, Erica Zeglio, Tobias Benselfelt, Mahiar Max Max Hamedi, Per A. Larsson

    Paper is an attractive substrate for sustainable and scalable organic electronics; however, its intrinsically insulating nature, the absence of continuous electronic pathways, and the lack of control over mixed ionic-electronic transport have limited its use in electrochemical devices. Here, we nanoengineer cellulose fibers by introducing cationic charges to facilitate a high specific surface area accessible for the adsorption of functional components. We further speed up the diffusion-controlled adsorption through controlled partial fibrillation of the fibers. The combined cationic charge and high surface area enabled high adsorption of the conducting polymer PEDOT:PSS (poly(3,4-ethylenedioxythiophene):polystyrene sulfonate) throughout the internal nanostructure of the fiber wall. The modified fibers were then rapidly transformed to mechanically robust, electrically conductive papers using conventional papermaking methodology. Post-treatment of papers containing 30 wt% PEDOT:PSS resulted in excellent charge transport and a conductivity as high as 13 S cm-1. Furthermore, electrochemical impedance spectroscopy of wet papers confirmed effective mixed ionic-electronic transport. Finally, to demonstrate the possibilities of the electroactive paper, we integrated the paper as channel materials in organic electrochemical transistors and evaluate them as enzyme-free hydrogen peroxide sensors, achieving a limit of detection of 0.79 µM and a sensitivity of 8.5% per decade, highlighting the potential of combining fiber-wall engineering with scalable processing and device integration.

  • Open Access

    PEDOT:PSS—A Key Material for Bioelectronics

    by Alan Eduardo Ávila Ramírez, David Pieter van der Laan, Mustafeez Bashir Shah, Liwen Wang, Erica Zeglio, Achilleas Savva

    Bioelectronics is a rapidly evolving interdisciplinary field that integrates principles of electrical engineering, materials science, and biology to develop electronic interfaces capable of recording and stimulating biological activity of the human body. The conducting polymer poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has emerged as a key bioelectronic material due to its unique properties, processing versatility, and biocompatibility. This work provides an overview of PEDOT:PSS‐based bioelectronic interfaces and their growing potential in clinical applications. The historical development of PEDOT:PSS is first traced, highlighting its rise as one of the most successful materials in organic bioelectronics. The fundamental properties that make PEDOT:PSS particularly well‐suited for bioelectronic interfaces are then examined, with a focus on how these properties can be precisely tuned through advanced processing and fabrication techniques. Both well‐established micropatterned interfaces and the latest advancements in multidimensional hydrogel‐based structures are discussed. Finally, cutting‐edge clinical applications of bioelectronic systems that incorporate PEDOT:PSS are discussed, underscoring their potential in next‐generation medical technologies. Overall, this work presents a balanced and forward‐looking perspective that connects the evolution of PEDOT:PSS to its emerging role in clinically translatable bioelectronic systems.


  • Open Access

    Microfabricated Organic Electrochemical Transistors Enabled by Printing and Laser Ablation

    by Alan Eduardo Avila Ramirez, Jessika Jessika, Yujie Fu, Gabriel Gyllensting, Marine Batista, David Hijman, Jyoti Shakya, Yazhou Wang, Wan Yue, Renee Kroon, et al.

    Organic electrochemical transistors (OECTs) are key bioelectronic devices with applications in neuromorphics, sensing, and flexible electronics. OECTs made using biobased and biodegradable materials are emerging as a sustainable alternative to nondegradable plastic and metal-based electronics. Printing is the key technique used to fabricate these types of devices, enabling fabrication at room temperature and using benign solvents, such as water. However, printing techniques suffer from relatively low resolution (tens to hundreds of micrometers), far below the micrometer resolution achieved via conventional metal deposition and photolithography. Here, we present a high-throughput additive-subtractive microfabrication strategy for carbon-based flexible OECTs using biodegradable materials and room-temperature processing. Additive manufacturing of large features is achieved via extrusion printing of a graphene ink to fabricate electrode contacts on cellulose acetate (CA), which serves both as the substrate and as the insulation layer. Combined with femtosecond (fs) laser ablation, this approach enables micrometer-resolution patterning of freestanding OECTs with channel openings down to 1 μm and sheet resistance below 10 Ω/sq. By tuning laser parameters, we demonstrate both selective and simultaneous ablation strategies, enabling the fabrication of horizontal, vertical, and planar-gated OECTs, as well as complementary NOT gate inverters. Thermal degradation studies in air show that over 80% of the device mass decomposes below 360 °C, providing a low-energy route for device disposal and addressing the environmental impact of electronic waste. This approach offers a lithography-free pathway toward the rapid prototyping of high-resolution, sustainable organic electronics, combining circularity, process simplicity, and architectural versatility for next-generation bioelectronic applications.


  • Open Access

    Inkjet-printed graphene multielectrode arrays: an accessible platform for in vitro cardiac electrophysiology

    by Jairo Lumpuy-Castillo, Yujie Fu, Alan Ávila, Kateryna Solodka, Jiantong Li, Oscar Lorenzo, Erica Zeglio, Leonardo D. Garma

    In vitro models have now become a realistic alternative to animal models for cardiotoxicity assessment. However, the cost and expertise required to implement in vitro electrophysiology systems to study cardiac cells poses a strong obstacle to their widespread use. This study presents a novel, cost-effective approach for in vitro cardiac electrophysiology using fully-printed graphene-based microelectrode arrays (pGMEAs) coupled with an open-source signal acquisition system. We characterized the pGMEAs’ electrical properties and biocompatibility, observing low impedance values and cell viability. We demonstrated the platform’s capability to record spontaneous electrophysiological activity from HL-1 cell cultures, and we monitored and quantified their responses to chemical stimulation with noradrenaline. This study demonstrates the feasibility of producing fully-printed, graphene-based devices for in vitro electrophysiology. The accessible and versatile platform we present here represents a step further in the development of alternative methods for cardiac safety screening.

  • Open Access

    Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables High‐Performance Electrochemical Transistors

    by Erica Zeglio, Yazhou Wang, Saumey Jain, Yunfan Lin, Alan Eduardo Avila Ramirez, Kui Feng, Xugang Guo, Helena Ose, Gatis Mozolevskis, Damia Mawad, et al.

    Diluting organic semiconductors with a host insulating polymer is used to increase the electronic mobility in organic electronic devices, such as thin film transistors, while considerably reducing material costs. In contrast to organic electronics, bioelectronic devices such as the organic electrochemical transistor (OECT) rely on both electronic and ionic mobility for efficient operation, making it challenging to integrate hydrophobic polymers as the predominant blend component. This work shows that diluting the n‐type conjugated polymer p(N‐T) with high molecular weight polystyrene (10 KDa) leads to OECTs with over three times better mobility‐volumetric capacitance product (µC*) with respect to the pristine p(N‐T) (from 4.3 to 13.4 F V−1 cm−1 s−1) while drastically decreasing the amount of conjugated polymer (six times less). This improvement in µC* is due to a dramatic increase in electronic mobility by two orders of magnitude, from 0.059 to 1.3 cm2 V−1 s−1 for p(N‐T):Polystyrene 10 KDa 1:6. Moreover, devices made with this polymer blend show better stability, retaining 77% of the initial drain current after 60 minutes operation in contrast to 12% for pristine p(N‐T). These results open a new generation of low‐cost organic mixed ionic‐electronic conductors where the bulk of the film is made by a commodity polymer.


  • Open Access

    Cleanroom‐Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors

    by Alessandro Enrico, Sebastian Buchmann, Fabio De Ferrari, Yunfan Lin, Yazhou Wang, Wan Yue, Gustaf Mårtensson, Göran Stemme, Mahiar Max Hamedi, Frank Niklaus, et al.

    Organic electrochemical transistors (OECTs) are promising devices for bioelectronics, such as biosensors. However, current cleanroom‐based microfabrication of OECTs hinders fast prototyping and widespread adoption of this technology for low‐volume, low‐cost applications. To address this limitation, a versatile and scalable approach for ultrafast laser microfabrication of OECTs is herein reported, where a femtosecond laser to pattern insulating polymers (such as parylene C or polyimide) is first used, exposing the underlying metal electrodes serving as transistor terminals (source, drain, or gate). After the first patterning step, conducting polymers, such as poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), or semiconducting polymers, are spin‐coated on the device surface. Another femtosecond laser patterning step subsequently defines the active polymer area contributing to the OECT performance by disconnecting the channel and gate from the surrounding spin‐coated film. The effective OECT width can be defined with high resolution (down to 2 µm) in less than a second of exposure. Micropatterning the OECT channel area significantly improved the transistor switching performance in the case of PEDOT:PSS‐based transistors, speeding up the devices by two orders of magnitude. The utility of this OECT manufacturing approach is demonstrated by fabricating complementary logic (inverters) and glucose biosensors, thereby showing its potential to accelerate OECT research.


  • Open Access

    2D MXene electrochemical transistors

    by Jyoti Shakya, Min-A. Kang, Jian Li, Armin VahidMohammadi, Weiqian Tian, Erica Zeglio, Mahiar Max Hamedi

    The solid-state field-effect transistor, FET, and its theories were paramount in the discovery and studies of graphene. In the past two decades another transistor based on conducting polymers, called organic electrochemical transistor (ECT), has been developed and largely studied. The main difference between organic ECTs and FETs is the mode and extent of channel doping; while in FETs the channel only has surface doping through dipoles, the mixed ionic–electronic conductivity of the channel material in organic ECTs enables bulk electrochemical doping. As a result, organic ECTs maximize conductance modulation at the expense of speed. To date ECTs have been based on conducting polymers, but here we show that MXenes, a class of 2D materials beyond graphene, enable the realization of electrochemical transistors (ECTs). We show that the formulas for organic ECTs can be applied to these 2D ECTs and used to extract parameters like mobility. These MXene ECTs have high transconductance values but low on–off ratios. We further show that conductance switching data measured using ECT, in combination with other in situ–ex situ electrochemical measurements, is a powerful tool for correlating the change in conductance to that of the redox state, to our knowledge, this is the first report of this important correlation for MXene films. 2D ECTs can draw great inspiration and theoretical tools from the field of organic ECTs and have the potential to considerably extend the capabilities of transistors beyond those of conducting polymer ECTs, with added properties such as extreme heat resistance, tolerance for solvents, and higher conductivity for both electrons and ions than conducting polymers.


  • Open Access

    Green Synthesis of Lactone‐Based Conjugated Polymers for n‐Type Organic Electrochemical Transistors

    by Yazhou Wang, Erica Zeglio, Lewen Wang, Shengyu Cong, Genming Zhu, Hailiang Liao, Jiayao Duan, Yecheng Zhou, Zhengke Li, Damia Mawad, et al.

    As new and better materials are implemented for organic electrochemical transistors (OECTs), it becomes increasingly important to adopt more economic and environmentally friendly synthesis pathways with respect to conventional transition‐metal‐catalyzed polymerizations. Herein, a series of novel n‐type donor–acceptor‐conjugated polymers based on glycolated lactone and bis‐isatin units are reported. All the polymers are synthesized via green and metal‐free aldol polymerization. The strong electron‐deficient lactone‐building blocks provide low‐lying lowest unoccupied molecular orbital (LUMO) and the rigid backbone needed for efficient electron mobility up to 0.07 cm2 V−1 s−1. Instead, polar atoms in the backbone and ethylene glycol side chains contribute to the ionic conductivity. The resulting OECTs exhibit a normalized maximum transconductance gm,norm of 0.8 S cm−1 and a μC* of 6.7 F cm−1 V−1 s−1. Data on the microstructure show that such device performance originates from a unique porous morphology together with a highly disordered amorphous microstructure, leading to efficient ion‐to‐electron coupling. Overall, the design strategy provides an inexpensive and metal‐free polymerization route for high‐performing n‐type OECTs.