Ali A. Zalghout
Research Subjects
Ali A. Zalghout has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Nooralhuda F. Saleh
Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC
2 shared publications - Benjamin Shane Underwood
Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC
1 shared publication - Connor Evanski
Kimley-Horn and Associates, Inc., Sacramento, CA
1 shared publication - George Saad
Department of Civil and Environmental Engineering, American University of Beirut, Beirut, Lebanon
1 shared publication Ghassan R. Chehab
Associate Professor, Dept. of Civil and Environmental Engineering, American Univ. of Beirut, P.O. Box 11-0236, Riad El-Solh 1107-2020, Lebanon
1 shared publication- Ghassan R. Chehab
Department of Civil and Environmental Engineering, American University of Beirut, Beirut, Lebanon
1 shared publication
Latest Publications
- 27 February 2026
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2680 (7) , 506-522
Utilizing Drone Technology for Pavement Surface Condition Evaluation at Truck Weigh Stations: A Case Study from the State of Virginia
Pavement management systems (PMS) are essential for optimizing maintenance budgets and scheduling effective treatments for pavement networks. Traditionally, PMS rely on manual pavement distress data collection, a process that is both costly and time-consuming. This study explores the use of unmanned aircraft systems (UAS), commonly known as drones, as an alternative for collecting pavement surface distress data. The study focused on 13 truck weigh stations managed by the Virginia Department of Transportation and the Virginia Department of Motor Vehicles in the U.S. A drone was utilized to capture detailed images of pavement sections, which were then analyzed using an artificial intelligence model to generate pavement surface evaluation and rating (PASER) scores. These drone-derived PASER scores were compared with those obtained through traditional manual inspections. The results demonstrate that the PASER values from drone imagery and manual surveys align closely, with statistical analyses showing no significant differences overall. However, discrepancies were noted for Portland cement concrete sections, where the drone technology analysis method missed certain distresses such as joint seal damage. This limitation highlights the need for improvements in drone imaging or additional technologies to fully capture and analyze all distress types. Moreover, challenges such as weather dependency, regulatory constraints, and site conditions must be addressed to optimize drone use in pavement management.
- 27 February 2026
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2680 (7) , 506-522
Utilizing Drone Technology for Pavement Surface Condition Evaluation at Truck Weigh Stations: A Case Study from the State of Virginia
Pavement management systems (PMS) are essential for optimizing maintenance budgets and scheduling effective treatments for pavement networks. Traditionally, PMS rely on manual pavement distress data collection, a process that is both costly and time-consuming. This study explores the use of unmanned aircraft systems (UAS), commonly known as drones, as an alternative for collecting pavement surface distress data. The study focused on 13 truck weigh stations managed by the Virginia Department of Transportation and the Virginia Department of Motor Vehicles in the U.S. A drone was utilized to capture detailed images of pavement sections, which were then analyzed using an artificial intelligence model to generate pavement surface evaluation and rating (PASER) scores. These drone-derived PASER scores were compared with those obtained through traditional manual inspections. The results demonstrate that the PASER values from drone imagery and manual surveys align closely, with statistical analyses showing no significant differences overall. However, discrepancies were noted for Portland cement concrete sections, where the drone technology analysis method missed certain distresses such as joint seal damage. This limitation highlights the need for improvements in drone imaging or additional technologies to fully capture and analyze all distress types. Moreover, challenges such as weather dependency, regulatory constraints, and site conditions must be addressed to optimize drone use in pavement management.
- 12 January 2019
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 21 (6) , 1647-1674
Design, construction, and evaluation of energy-harvesting asphalt pavement systems
Energy-harvesting pavements, one of which is the Hydronic Asphalt Pavement (HAP) system, have been proven to be both more durable and sustainable than conventional pavement systems. A HAP consists of a system of connected pipes embedded within the asphalt pavement which function to extract or reject heat from/into the pavement via a circulating fluid. Three large-scale systems were designed and constructed in the field: a control section, a regular HAP section, and a section containing a HAP coupled to a horizontal ground heat exchanger (GCHAP). The field data showed that neither the HAP section nor the GCHAP section were able to substantially decrease the pavement surface temperature. However, both GCHAP and HAP were able to decrease the asphalt temperature at a depth of 2.5 cm below the surface by a magnitude of around 10°C. Another key finding of this study shows that increasing the conductivity of a flexible pavement asphalt layer, rather than increasing the conductivity of the embedded pipes, significantly enhances the effectiveness of the HAP system.
- 12 January 2019
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 21 (6) , 1647-1674
Design, construction, and evaluation of energy-harvesting asphalt pavement systems
Energy-harvesting pavements, one of which is the Hydronic Asphalt Pavement (HAP) system, have been proven to be both more durable and sustainable than conventional pavement systems. A HAP consists of a system of connected pipes embedded within the asphalt pavement which function to extract or reject heat from/into the pavement via a circulating fluid. Three large-scale systems were designed and constructed in the field: a control section, a regular HAP section, and a section containing a HAP coupled to a horizontal ground heat exchanger (GCHAP). The field data showed that neither the HAP section nor the GCHAP section were able to substantially decrease the pavement surface temperature. However, both GCHAP and HAP were able to decrease the asphalt temperature at a depth of 2.5 cm below the surface by a magnitude of around 10°C. Another key finding of this study shows that increasing the conductivity of a flexible pavement asphalt layer, rather than increasing the conductivity of the embedded pipes, significantly enhances the effectiveness of the HAP system.
- 1 November 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (11)
Advanced Characterization of Asphalt Concrete Mixtures Reinforced with Synthetic Fibers
This study evaluates the behavior of fiber-reinforced asphalt mixtures using advanced material characterization and performance prediction models. The polymeric nature of the proprietary blend of polyolefin and aramid fibers used warrants examining the contribution of the fibers not only to the physical network of the mixture but also to the extent of modification of the asphalt binder upon mixing. The effect of adding these synthetic fibers on the performance of asphalt concrete mixtures is assessed in the state of compression to investigate the resistance to rutting by (1) using a viscoelastoplastic continuum damage (VEPCD) model to provide an accurate and realistic assessment, and (2) by conducting a mechanistic-empirical (ME) analysis using Pavement ME software because it is the state of practice in pavement design and analysis. Upon addition of fibers, the developed VEPCD models indicate an overall improvement in the performance in terms of predicted strain in response to a given stress profile. Fibers are found to impose a faster recovery of viscoelastic strains during rest periods and lower strains during loading when added to a warm mix asphalt (WMA) mix containing unmodified binder. Fibers are also found to reduce the viscoplastic strains of both hot mix asphalt (HMA) and WMA mixtures at 5°C and of HMA mixture at 35°C. The performance improvement due to fibers is enhanced when using fibers of shorter length, using fibers in mixtures with wax-based additives, or in mixtures with coarser gradations.
- 1 November 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (11)
Advanced Characterization of Asphalt Concrete Mixtures Reinforced with Synthetic Fibers
This study evaluates the behavior of fiber-reinforced asphalt mixtures using advanced material characterization and performance prediction models. The polymeric nature of the proprietary blend of polyolefin and aramid fibers used warrants examining the contribution of the fibers not only to the physical network of the mixture but also to the extent of modification of the asphalt binder upon mixing. The effect of adding these synthetic fibers on the performance of asphalt concrete mixtures is assessed in the state of compression to investigate the resistance to rutting by (1) using a viscoelastoplastic continuum damage (VEPCD) model to provide an accurate and realistic assessment, and (2) by conducting a mechanistic-empirical (ME) analysis using Pavement ME software because it is the state of practice in pavement design and analysis. Upon addition of fibers, the developed VEPCD models indicate an overall improvement in the performance in terms of predicted strain in response to a given stress profile. Fibers are found to impose a faster recovery of viscoelastic strains during rest periods and lower strains during loading when added to a warm mix asphalt (WMA) mix containing unmodified binder. Fibers are also found to reduce the viscoplastic strains of both hot mix asphalt (HMA) and WMA mixtures at 5°C and of HMA mixture at 35°C. The performance improvement due to fibers is enhanced when using fibers of shorter length, using fibers in mixtures with wax-based additives, or in mixtures with coarser gradations.
- 1 December 2017
- Published by Elsevier in Transportation Research Part D: Transport and Environment
- Vol. 57, 172-184
Impact of climate change on pavement structural performance in the United States
- 1 December 2017
- Published by Elsevier in Transportation Research Part D: Transport and Environment
- Vol. 57, 172-184
Impact of climate change on pavement structural performance in the United States