Duckjong Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Duckjong Kim has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Chang-Soo Han
Department of Mechanical Engineering, Korea University, Seoul, 136-701, South Korea
3 shared publicationsCheng Ai Li
Department of Nano Mechanics, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseong-gu, Daejeon 305-343, Republic of Korea.
2 shared publicationsJae Young Yun
Korea Advanced Institute of Science and Technology
2 shared publicationsJae-Hyun Kim
Department of Nano Mechanics, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseong-gu, Daejeon 305-343, Republic of Korea
2 shared publicationsJinsung Park
2 shared publicationsLijing Zhu
Department of Nano Mechanics, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseong-gu, Daejeon 305-343, Republic of Korea
2 shared publications
Latest Publications
- 1 March 2019
- Published by Elsevier in Energy Conversion and Management
- Vol. 183, 360-368
Highly enhanced thermoelectric energy harvesting from a high-temperature heat source by boosting thermal interface conduction
- 1 March 2019
- Published by Elsevier in Energy Conversion and Management
- Vol. 183, 360-368
Highly enhanced thermoelectric energy harvesting from a high-temperature heat source by boosting thermal interface conduction
- 1 November 2018
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 133, 266-272
Paved phonon transport route in graphene by vapor phase process
- 1 November 2018
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 133, 266-272
Paved phonon transport route in graphene by vapor phase process
- Open Access
- 27 February 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 43581
Continuous Purification of Colloidal Quantum Dots in Large-Scale Using Porous Electrodes in Flow Channel
Colloidal quantum dots (QDs) afford huge potential in numerous applications owing to their excellent optical and electronic properties. After the synthesis of QDs, separating QDs from unreacted impurities in large scale is one of the biggest issues to achieve scalable and high performance optoelectronic applications. Thus far, however, continuous purification method, which is essential for mass production, has rarely been reported. In this study, we developed a new continuous purification process that is suitable to the mass production of high-quality QDs. As-synthesized QDs are driven by electrophoresis in a flow channel and captured by porous electrodes and finally separated from the unreacted impurities. Nuclear magnetic resonance and ultraviolet/visible/near-infrared absorption spectroscopic data clearly showed that the impurities were efficiently removed from QDs with the purification yield, defined as the ratio of the mass of purified QDs to that of QDs in the crude solution, up to 87%. Also, we could successfully predict the purification yield depending on purification conditions with a simple theoretical model. The proposed large-scale purification process could be an important cornerstone for the mass production and industrial use of high-quality QDs.
- 27 February 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 43581
Open AccessContinuous Purification of Colloidal Quantum Dots in Large-Scale Using Porous Electrodes in Flow Channel
Colloidal quantum dots (QDs) afford huge potential in numerous applications owing to their excellent optical and electronic properties. After the synthesis of QDs, separating QDs from unreacted impurities in large scale is one of the biggest issues to achieve scalable and high performance optoelectronic applications. Thus far, however, continuous purification method, which is essential for mass production, has rarely been reported. In this study, we developed a new continuous purification process that is suitable to the mass production of high-quality QDs. As-synthesized QDs are driven by electrophoresis in a flow channel and captured by porous electrodes and finally separated from the unreacted impurities. Nuclear magnetic resonance and ultraviolet/visible/near-infrared absorption spectroscopic data clearly showed that the impurities were efficiently removed from QDs with the purification yield, defined as the ratio of the mass of purified QDs to that of QDs in the crude solution, up to 87%. Also, we could successfully predict the purification yield depending on purification conditions with a simple theoretical model. The proposed large-scale purification process could be an important cornerstone for the mass production and industrial use of high-quality QDs.
- 25 February 2017
- Published by SAGE Publications in Clinical Hemorheology and Microcirculation
- Vol. 65 (1) , 49-56
Rheological alteration of erythrocytes exposed to carbon nanotubes
Single-walled carbon nanotubes (SWNTs) have been increasingly used in a variety of biomedical applications, such as in vivo delivery of drugs and tumor imaging. Potential exposure of SWNTs to human red blood cells (RBCs) may cause serious toxicity in
- 25 February 2017
- Published by SAGE Publications in Clinical Hemorheology and Microcirculation
- Vol. 65 (1) , 49-56
Rheological alteration of erythrocytes exposed to carbon nanotubes
Single-walled carbon nanotubes (SWNTs) have been increasingly used in a variety of biomedical applications, such as in vivo delivery of drugs and tumor imaging. Potential exposure of SWNTs to human red blood cells (RBCs) may cause serious toxicity in
- Open Access
- 1 January 2017
- Published by AIP Publishing in AIP Advances
- Vol. 7 (1) , 015107
Generation of planar blast waves using carbon nanotubes-poly-dimethylsiloxane optoacoustic transducer
We have generated planar blast waves over the large area using carbon nanotubes(CNT)-poly-dimethylsiloxane(PDMS) optoacoustic transducer. Pulse laser is absorbed by CNT and converted to heat, and the heat is transferred to PDMS inducing its thermal expansion and blast wave generation. To theoretically describe the planar blast wave generation, we build one-dimensional simulation model and find analytical solutions for temperature and pressure distributions. The analytical solution validated by the experimental data sheds light on how to improve the performance of the new transducer. Resonance of acoustic waves inside the transducer is also discussed. The new optoacoustic transducer optimized based on the fundamental understandings will be useful in generating high quality blast waves for research and industrial applications.
- 1 January 2017
- Published by AIP Publishing in AIP Advances
- Vol. 7 (1) , 015107
Open AccessGeneration of planar blast waves using carbon nanotubes-poly-dimethylsiloxane optoacoustic transducer
We have generated planar blast waves over the large area using carbon nanotubes(CNT)-poly-dimethylsiloxane(PDMS) optoacoustic transducer. Pulse laser is absorbed by CNT and converted to heat, and the heat is transferred to PDMS inducing its thermal expansion and blast wave generation. To theoretically describe the planar blast wave generation, we build one-dimensional simulation model and find analytical solutions for temperature and pressure distributions. The analytical solution validated by the experimental data sheds light on how to improve the performance of the new transducer. Resonance of acoustic waves inside the transducer is also discussed. The new optoacoustic transducer optimized based on the fundamental understandings will be useful in generating high quality blast waves for research and industrial applications.
- 8 June 2016
- Published by Wiley in Advanced Materials
- Vol. 28 (33) , 7220-7227
Ultrahigh Thermal Conductivity of Interface Materials by Silver‐Functionalized Carbon Nanotube Phonon Conduits
An ultrahigh thermal conductivity (κ = 160 W m−1K−1) of thermal interface materials is achieved with a high enhancement factor (96). A small amount (2.3 vol%) of 1D multiwalled carbon nanotubes (MWNTs) with high κ constructs effective phonon transport pathways between microscale silver‐flake islands, and a solid phonon transport junction is realized by the coalescence of silver nanoparticles pre‐functionalized on the MWNTs.
- 8 June 2016
- Published by Wiley in Advanced Materials
- Vol. 28 (33) , 7220-7227
Ultrahigh Thermal Conductivity of Interface Materials by Silver‐Functionalized Carbon Nanotube Phonon Conduits
An ultrahigh thermal conductivity (κ = 160 W m−1K−1) of thermal interface materials is achieved with a high enhancement factor (96). A small amount (2.3 vol%) of 1D multiwalled carbon nanotubes (MWNTs) with high κ constructs effective phonon transport pathways between microscale silver‐flake islands, and a solid phonon transport junction is realized by the coalescence of silver nanoparticles pre‐functionalized on the MWNTs.
- 7 August 2015
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 140 (19) , 6705-6710
Electrochemical monitoring of colloidal silver nanowires in aqueous samples
Silver nanowires (NWs) are increasingly utilized in technological materials and consumer products, but an effective analytical technique is not yet available to measure their concentration in the environment. Here, we present an electrochemical method to quantify Ag NWs suspended in aqueous solution. Using linear sweep voltammetry, the Ag NWs are identified by the peak potential while their concentration is revealed by the intensity of the peak current. The peak current varies linearly with the Ag NW concentration with a low detection limit of 3.50 ng mL−1. This method is also successfully applied to quantify Ag NWs in mixtures with nanoparticles, through their specific oxidation behavior, and in wastewater obtained after the Ag NW film preparation process.
- 7 August 2015
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 140 (19) , 6705-6710
Electrochemical monitoring of colloidal silver nanowires in aqueous samples
Silver nanowires (NWs) are increasingly utilized in technological materials and consumer products, but an effective analytical technique is not yet available to measure their concentration in the environment. Here, we present an electrochemical method to quantify Ag NWs suspended in aqueous solution. Using linear sweep voltammetry, the Ag NWs are identified by the peak potential while their concentration is revealed by the intensity of the peak current. The peak current varies linearly with the Ag NW concentration with a low detection limit of 3.50 ng mL−1. This method is also successfully applied to quantify Ag NWs in mixtures with nanoparticles, through their specific oxidation behavior, and in wastewater obtained after the Ag NW film preparation process.
- 24 December 2014
- Published by IOP Publishing in Materials Research Express
- Vol. 2 (1) , 15004
Interaction between single-walled carbon nanotubes and chromatography gel during size separation
- 24 December 2014
- Published by IOP Publishing in Materials Research Express
- Vol. 2 (1) , 15004
Interaction between single-walled carbon nanotubes and chromatography gel during size separation
- 29 September 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (23) , 14467-14472
Continuous flow purification of nanocrystal quantum dots
Colloidal quantum dot (QD) purification is typically conducted via repeating precipitation–redispersion involving massive amounts of organic solvents and has been the main obstacle in mass production of QDs with dependable surface properties. Our results show that the electric field apparently affects the streamlining of QDs and that we could continuously collect stably dispersed QDs by the electrophoretic purification process. The purification yield increases as the electric potential difference increases or the flow rate decreases, but reaches an asymptotic value. The yield can be further improved by raising the absolute magnitude of the mobility of QDs with the addition of solvents with high dielectric constants. The continuous purification process sheds light on industrial production of colloidal nanomaterials.
- 29 September 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (23) , 14467-14472
Continuous flow purification of nanocrystal quantum dots
Colloidal quantum dot (QD) purification is typically conducted via repeating precipitation–redispersion involving massive amounts of organic solvents and has been the main obstacle in mass production of QDs with dependable surface properties. Our results show that the electric field apparently affects the streamlining of QDs and that we could continuously collect stably dispersed QDs by the electrophoretic purification process. The purification yield increases as the electric potential difference increases or the flow rate decreases, but reaches an asymptotic value. The yield can be further improved by raising the absolute magnitude of the mobility of QDs with the addition of solvents with high dielectric constants. The continuous purification process sheds light on industrial production of colloidal nanomaterials.
- 4 December 2013
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 25 (14) , 759-765
Detection and characterization of nanomaterials released in low concentrations during multi-walled carbon nanotube spraying process in a cleanroom
Release of nanomaterials was assessed in a cleanroom workplace designed for the handling of multi-walled carbon nanotubes. During the process, the nanotubes were sprayed in a chamber fitted with an exhaust duct system. The front door of the spraying chamber was completely closed, but rear end of the chamber was partially open. Throughout a series of spray processes, three detectors – an optical particle counter, a nanoparticle aerosol monitor, and an aethalometer – counted and characterized particles escaping the chamber. Concentrations of particle surface area and black carbon emitted by the spraying were assessed assuming zero background aerosol concentration in the cleanroom. Very low concentrations of black carbon, 0.4 μg/m3, were observed. In conclusion, in a cleanroom, low concentrations of nanomaterials were detected to be emitted from a spraying chamber into the workplace. The level of particles reaching the workplace was sufficiently low to have made their detection difficult in a normal environment. Both target nanomaterial and non-intended incidental nanomaterials were released during spraying. Despite the use of exhaust duct system in the process chamber, workers would be exposed to some particles if the chamber were partially open. The exhaust duct system was not enough to remove all the particles released in the chamber.
- 4 December 2013
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 25 (14) , 759-765
Detection and characterization of nanomaterials released in low concentrations during multi-walled carbon nanotube spraying process in a cleanroom
Release of nanomaterials was assessed in a cleanroom workplace designed for the handling of multi-walled carbon nanotubes. During the process, the nanotubes were sprayed in a chamber fitted with an exhaust duct system. The front door of the spraying chamber was completely closed, but rear end of the chamber was partially open. Throughout a series of spray processes, three detectors – an optical particle counter, a nanoparticle aerosol monitor, and an aethalometer – counted and characterized particles escaping the chamber. Concentrations of particle surface area and black carbon emitted by the spraying were assessed assuming zero background aerosol concentration in the cleanroom. Very low concentrations of black carbon, 0.4 μg/m3, were observed. In conclusion, in a cleanroom, low concentrations of nanomaterials were detected to be emitted from a spraying chamber into the workplace. The level of particles reaching the workplace was sufficiently low to have made their detection difficult in a normal environment. Both target nanomaterial and non-intended incidental nanomaterials were released during spraying. Despite the use of exhaust duct system in the process chamber, workers would be exposed to some particles if the chamber were partially open. The exhaust duct system was not enough to remove all the particles released in the chamber.