Hye Ryung Byon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hye Ryung Byon has a total of 300 co-authors. Here are the top co-authors by number of shared publications:
- Jiwon Park
Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
14 shared publications Toshiaki Ohta
Sychrotron Radiation (SR) Center Ritsumeikan University Kusatsu Japan
11 shared publications- Vikram Singh
Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
10 shared publications - Yohan Kim
Department of Chemistry Korea Advanced Institute of Science and Technology (KAIST) Daejeon South Korea
7 shared publications - Moony Na
Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
6 shared publications Hirona Yamagishi
Sychrotron Radiation (SR) Center, Ritsumeikan University, Kusatsu, Shiga 525-8577, Japan
5 shared publications
Latest Publications
- 15 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (20) , 13245-13246
Energy Storage across Scales: Bridging Material Design and System-Level Performance
- 15 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (20) , 13245-13246
Energy Storage across Scales: Bridging Material Design and System-Level Performance
- Open Access
- 21 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (39) , 58413-58427
Operando Spectroscopic Insights into the Influences of Organic Modifiers on the Electrochemical CO2 Reduction Microenvironments
Developing efficient carbon dioxide (CO2) conversion technology is imperative to address global warming and advance carbon neutrality. The electrochemical CO2 reduction reaction (CO2RR) offers a promising route for converting CO2 into value-added products using renewable electricity; however, its practical implementation is hindered by high overpotential requirements and competition with the hydrogen evolution reaction (HER). Metal electrodes (Au, Ag, Cu, Sn, and others) display distinct product selectivities in CO2RR, ranging from CO and formate to multi-carbon hydrocarbons and alcohols, governed by the metal identity and the surface binding affinities of key intermediates, rendering the reaction pathway highly sensitive to the surface and interface microenvironment. Operando spectro-electrochemical techniques, including infrared (IR) and Raman spectroscopy, enable real-time monitoring of microenvironmental changes that are inaccessible by ex-situ analysis. Surface-enhanced variants, such as surface-enhanced infrared absorption spectroscopy (SEIRAS) and surface-enhanced Raman spectroscopy (SERS), further enhance signal quality and sensitivity, providing mechanistic insights at the molecular level. This mini review organizes operando spectroscopic insights into the role of organic modifiers in enhancing CO2RR activity on metal electrodes. Organic surface modifications employing amines, pyridines, quinones, triazines, and imidazolium moieties reshape the interfacial reaction environment. We classify the effects of these modifiers into five mechanistic roles: (1) activation of CO2 molecules, (2) tuning the binding strength and surface coverage of key reaction intermediates, (3) modulating interfacial water structure, (4) regulating local pH, and (5) preserving the oxidation state of the electrode. Each role has been substantiated by operando spectroscopic evidence, manifested as shifts in vibrational band positions or changes in band intensities of intermediate signals. Importantly, these roles are interrelated: most modifiers act through several, and a given spectral change may have multiple origins. Mechanistic assignment thus requires cross-validation across complementary operando probes. Together, this framework rationalizes CO2RR at organic-modified interfaces and guides catalyst design.
- 21 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (39) , 58413-58427
Open AccessOperando Spectroscopic Insights into the Influences of Organic Modifiers on the Electrochemical CO2 Reduction Microenvironments
Developing efficient carbon dioxide (CO2) conversion technology is imperative to address global warming and advance carbon neutrality. The electrochemical CO2 reduction reaction (CO2RR) offers a promising route for converting CO2 into value-added products using renewable electricity; however, its practical implementation is hindered by high overpotential requirements and competition with the hydrogen evolution reaction (HER). Metal electrodes (Au, Ag, Cu, Sn, and others) display distinct product selectivities in CO2RR, ranging from CO and formate to multi-carbon hydrocarbons and alcohols, governed by the metal identity and the surface binding affinities of key intermediates, rendering the reaction pathway highly sensitive to the surface and interface microenvironment. Operando spectro-electrochemical techniques, including infrared (IR) and Raman spectroscopy, enable real-time monitoring of microenvironmental changes that are inaccessible by ex-situ analysis. Surface-enhanced variants, such as surface-enhanced infrared absorption spectroscopy (SEIRAS) and surface-enhanced Raman spectroscopy (SERS), further enhance signal quality and sensitivity, providing mechanistic insights at the molecular level. This mini review organizes operando spectroscopic insights into the role of organic modifiers in enhancing CO2RR activity on metal electrodes. Organic surface modifications employing amines, pyridines, quinones, triazines, and imidazolium moieties reshape the interfacial reaction environment. We classify the effects of these modifiers into five mechanistic roles: (1) activation of CO2 molecules, (2) tuning the binding strength and surface coverage of key reaction intermediates, (3) modulating interfacial water structure, (4) regulating local pH, and (5) preserving the oxidation state of the electrode. Each role has been substantiated by operando spectroscopic evidence, manifested as shifts in vibrational band positions or changes in band intensities of intermediate signals. Importantly, these roles are interrelated: most modifiers act through several, and a given spectral change may have multiple origins. Mechanistic assignment thus requires cross-validation across complementary operando probes. Together, this framework rationalizes CO2RR at organic-modified interfaces and guides catalyst design.
- 6 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 27989-28009
In Situ and Operando Studies as Mechanistic Toolbox for Redox Flow Batteries, Redox Targeting, and CO2 Capture Systems: Progress and Perspective
As renewable energy deployment accelerates, safe and scalable long-duration energy storage (LDES) becomes increasingly critical. Redox flow batteries (RFBs) offer intrinsic nonflammability and decoupled energy–power architectures, yet multihour operation and multidecade lifetimes demand precise and state-resolved diagnostics. These challenges are intensified for organic redox-active species and emerging architectures such as redox-targeting flow batteries and electrochemical CO2 capture systems. This perspective highlights recent advances in in situ and operando spectroscopic and electrochemical tools, including UV–vis–NIR, NMR/EPR, vibrational spectroscopy, X-ray technique, fluorescence microscopy, neutron imaging, ultramicroelectrodes, and SECM, that resolve electrolyte speciation, transient intermediates, aggregation, and interfacial kinetics. These methodologies establish a mechanistic framework for rational electrolyte design and next-generation RFB development.
- 6 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 27989-28009
In Situ and Operando Studies as Mechanistic Toolbox for Redox Flow Batteries, Redox Targeting, and CO2 Capture Systems: Progress and Perspective
As renewable energy deployment accelerates, safe and scalable long-duration energy storage (LDES) becomes increasingly critical. Redox flow batteries (RFBs) offer intrinsic nonflammability and decoupled energy–power architectures, yet multihour operation and multidecade lifetimes demand precise and state-resolved diagnostics. These challenges are intensified for organic redox-active species and emerging architectures such as redox-targeting flow batteries and electrochemical CO2 capture systems. This perspective highlights recent advances in in situ and operando spectroscopic and electrochemical tools, including UV–vis–NIR, NMR/EPR, vibrational spectroscopy, X-ray technique, fluorescence microscopy, neutron imaging, ultramicroelectrodes, and SECM, that resolve electrolyte speciation, transient intermediates, aggregation, and interfacial kinetics. These methodologies establish a mechanistic framework for rational electrolyte design and next-generation RFB development.
- 14 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12575-12585
Stabilizing lithium metal anodes via tuned Li + –π interactions in nanoporous porous aromatic framework-coated separators
Porous aromatic frameworks (PAFs) regulate Li + solvation via cation–π interactions, while N-functionalities tune Li + affinity and desolvation behavior. This promotes Li + transport and inorganic-rich SEI formation on Li metal anodes.
- 14 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12575-12585
Stabilizing lithium metal anodes via tuned Li + –π interactions in nanoporous porous aromatic framework-coated separators
Porous aromatic frameworks (PAFs) regulate Li + solvation via cation–π interactions, while N-functionalities tune Li + affinity and desolvation behavior. This promotes Li + transport and inorganic-rich SEI formation on Li metal anodes.
- 4 January 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (10)
Ultrafast Charging Enabled by Soft Ion Channels on Layered Transition Oxide Cathodes in Aqueous Li‐Ion Batteries
High‐power battery systems are essential for electric vehicles and grid stability, yet their development hinges on optimizing ion transport at the electrode–electrolyte interface to minimize Li + migration barriers and suppress parasitic reactions. Here, we demonstrated a molecularly engineered interfacial ion channel on LiCoO 2 (LCO) using amphiphilic lithium dodecyl sulfate (DS), which enabled ultrafast and durable performance in aqueous media. The DS molecules assembled into dynamic interfacial architectures that facilitated efficient Li + transport, delivering remarkable rate capability of ∼82 mAh g −1 at a 10C rate for 1000 cycles and ∼80 mAh g −1 at 15C for 500 cycles with Coulombic efficiencies of 99.49% and 99.51%, respectively. In situ electrochemical infrared spectroscopy revealed that DS adopted a sulfate‐headgroup‐downward orientation predominantly, while voltage polarization drove incorporation of upward‐oriented molecules from the bulk electrolyte solution. Density functional theory (DFT) calculations showed that the downward configuration lowers Li + extraction barriers during charging, while the mixed orientation facilitates Li + insertion during discharging. Experimentally, the well‐designed DS layer increased Li + mobility by nearly an order of magnitude compared to the DS‐free system. These synergistic effects underpin the exceptional rate performance and highlight the effectiveness of molecularly engineered ion channels in enabling high‐power Li‐ion batteries.
- 4 January 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (10)
Ultrafast Charging Enabled by Soft Ion Channels on Layered Transition Oxide Cathodes in Aqueous Li‐Ion Batteries
High‐power battery systems are essential for electric vehicles and grid stability, yet their development hinges on optimizing ion transport at the electrode–electrolyte interface to minimize Li + migration barriers and suppress parasitic reactions. Here, we demonstrated a molecularly engineered interfacial ion channel on LiCoO 2 (LCO) using amphiphilic lithium dodecyl sulfate (DS), which enabled ultrafast and durable performance in aqueous media. The DS molecules assembled into dynamic interfacial architectures that facilitated efficient Li + transport, delivering remarkable rate capability of ∼82 mAh g −1 at a 10C rate for 1000 cycles and ∼80 mAh g −1 at 15C for 500 cycles with Coulombic efficiencies of 99.49% and 99.51%, respectively. In situ electrochemical infrared spectroscopy revealed that DS adopted a sulfate‐headgroup‐downward orientation predominantly, while voltage polarization drove incorporation of upward‐oriented molecules from the bulk electrolyte solution. Density functional theory (DFT) calculations showed that the downward configuration lowers Li + extraction barriers during charging, while the mixed orientation facilitates Li + insertion during discharging. Experimentally, the well‐designed DS layer increased Li + mobility by nearly an order of magnitude compared to the DS‐free system. These synergistic effects underpin the exceptional rate performance and highlight the effectiveness of molecularly engineered ion channels in enabling high‐power Li‐ion batteries.
- 1 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (49) , 66569-66581
Solvent-Dependent Size Regulation of Li 6 PS 5 Cl Synthesized through Precipitation–Dissolution–Reprecipitation Processes
Solid-state electrolytes (SSEs) have received significant attention as a means to improve the energy density and safety of lithium (Li) batteries. However, their electrochemical performance is critically dependent on the quality of interfacial contact between constituent particles, particularly within the cathode composite. To ensure intimate contact between the SSE and the cathode active material, the use of small SSE particles in 1-3 μm dimensions is essential. Here, we report a one-pot synthesis of argyrodite-type Li6PS5Cl (LPSCl) particles with an average size of ∼2 μm, achieved without any post-processing steps. The key strategy was the use of a solvent with strong Li+ solvation capability, specifically 1,2-dimethoxyethane (DME), based on the reaction of Li+ with naphthalene-derived radical anions. The Li+ solvation in DME prevents the formation of aggregative ion pairs between Li+ and anionic intermediates, such as polysulfides, polythiophosphates, and chlorides. This stabilization of free Li+ governed nucleation and evolution of LPSCl particles via a precipitation-dissolution-reprecipitation process. The use of DME enabled the synthesis of smaller and also higher purity particles compared to weaker solvating solvents such as tetrahydrofuran (THF) and 2-methyl-THF, leading to superior ionic conductivity (3.3 mS cm-1 at 30 °C) and a high critical current density (1.75 mA cm-2). When applied in full cells using LiNbO3-coated NCM811 cathodes, the cells demonstrated remarkable cycling stability, retaining 99.7% of their capacity after 1000 cycles at 1.0 C and 55 °C, providing excellent contact between the small-size LPSCl and NCM811.
- 1 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (49) , 66569-66581
Solvent-Dependent Size Regulation of Li 6 PS 5 Cl Synthesized through Precipitation–Dissolution–Reprecipitation Processes
Solid-state electrolytes (SSEs) have received significant attention as a means to improve the energy density and safety of lithium (Li) batteries. However, their electrochemical performance is critically dependent on the quality of interfacial contact between constituent particles, particularly within the cathode composite. To ensure intimate contact between the SSE and the cathode active material, the use of small SSE particles in 1-3 μm dimensions is essential. Here, we report a one-pot synthesis of argyrodite-type Li6PS5Cl (LPSCl) particles with an average size of ∼2 μm, achieved without any post-processing steps. The key strategy was the use of a solvent with strong Li+ solvation capability, specifically 1,2-dimethoxyethane (DME), based on the reaction of Li+ with naphthalene-derived radical anions. The Li+ solvation in DME prevents the formation of aggregative ion pairs between Li+ and anionic intermediates, such as polysulfides, polythiophosphates, and chlorides. This stabilization of free Li+ governed nucleation and evolution of LPSCl particles via a precipitation-dissolution-reprecipitation process. The use of DME enabled the synthesis of smaller and also higher purity particles compared to weaker solvating solvents such as tetrahydrofuran (THF) and 2-methyl-THF, leading to superior ionic conductivity (3.3 mS cm-1 at 30 °C) and a high critical current density (1.75 mA cm-2). When applied in full cells using LiNbO3-coated NCM811 cathodes, the cells demonstrated remarkable cycling stability, retaining 99.7% of their capacity after 1000 cycles at 1.0 C and 55 °C, providing excellent contact between the small-size LPSCl and NCM811.
- Open Access
- 3 November 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (24) , e202501876
Unveiling the Electrochemical Reversibility of Multielectron Redox in s‐Tetrazine Derivatives for Large‐Capacity Electrode Materials
1,2,4,5‐tetrazine (s‐tetrazine) is a promising redox center for organic electrode materials due to its low molecular weight and ability to undergo two‐electron redox reactions. However, in practice, the irreversibility of the second‐electron transfer has often limited the specific capacities of the s‐tetrazine‐based electrodes in metal‐organic cells. Herein, electrochemically reversible two‐electron‐transfer processes from the s‐tetrazine core are demonstrated by introducing electron‐withdrawing pyridine rings at 3‐ and 6‐positions. Comparative analysis of three s‐tetrazine derivatives, 3,6‐diphenyl‐1,2,4,5‐tetrazine ( Ph‐Tz ), 3,6‐di(4‐pyridinyl)‐1,2,4,5‐tetrazine ( 4‐Py‐Tz ), and 3,6‐di(2‐pyridinyl)‐1,2,4,5‐tetrazine ( 2‐Py‐Tz ) reveals that both electron‐withdrawing effect and Li‐ion coordination play critical roles in redox reversibility. Among them, 2‐Py‐Tz exhibits the highest electron‐transfer rate with Li + diffusion coefficient attributed to the ortho ‐positioned pyridine nitrogen atoms, which strongly stabilize the dianion state through synergistic electron‐withdrawing and Li‐ion locking effects.
- 3 November 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (24) , e202501876
Open AccessUnveiling the Electrochemical Reversibility of Multielectron Redox in s‐Tetrazine Derivatives for Large‐Capacity Electrode Materials
1,2,4,5‐tetrazine (s‐tetrazine) is a promising redox center for organic electrode materials due to its low molecular weight and ability to undergo two‐electron redox reactions. However, in practice, the irreversibility of the second‐electron transfer has often limited the specific capacities of the s‐tetrazine‐based electrodes in metal‐organic cells. Herein, electrochemically reversible two‐electron‐transfer processes from the s‐tetrazine core are demonstrated by introducing electron‐withdrawing pyridine rings at 3‐ and 6‐positions. Comparative analysis of three s‐tetrazine derivatives, 3,6‐diphenyl‐1,2,4,5‐tetrazine ( Ph‐Tz ), 3,6‐di(4‐pyridinyl)‐1,2,4,5‐tetrazine ( 4‐Py‐Tz ), and 3,6‐di(2‐pyridinyl)‐1,2,4,5‐tetrazine ( 2‐Py‐Tz ) reveals that both electron‐withdrawing effect and Li‐ion coordination play critical roles in redox reversibility. Among them, 2‐Py‐Tz exhibits the highest electron‐transfer rate with Li + diffusion coefficient attributed to the ortho ‐positioned pyridine nitrogen atoms, which strongly stabilize the dianion state through synergistic electron‐withdrawing and Li‐ion locking effects.
- Open Access
- 5 October 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (47)
Room‐Temperature Single Li + Ion Conducting Organic Solid‐State Electrolyte with 10 −4 S cm −1 Conductivity for Lithium‐Metal Batteries
Covalent organic frameworks (COFs) are promising solid‐state electrolytes (SSEs) for lithium (Li)‐metal batteries due to their tunable structures, ordered nanochannels, and suppressed segmental motion, which support Li⁺ ion transport at ambient temperatures. However, pellet‐type COF‐based SSEs have exhibited low ionic conductivity, attributed to suboptimal ion transport pathways, limited crystallinity, and extensive grain boundary formation. Here, a 20 µm‐thick disulfonate‐functionalized COF (COF ds ) film is presented that achieves an ionic conductivity of 1.0 × 10 ‒4 S cm ‒1 at 25 °C. The integration of immobile disulfonate anions and carbonyl groups enables inter‐subchannel Li⁺ hopping with minimal spatial separation. Molecular dynamics (MD) simulations under applied fields confirm that the molecular design facilitates optimized Li⁺ conduction pathways. Solution‐phase synthesis enabled COF ds films with high crystallinity, uniform morphology, and smooth surfaces, which enhanced electrochemical performance. As a result, symmetric Li cells with the COF ds film showed stable cycling for over 1300 h at 25 °C, while full cells with LiFePO 4 cathodes retained ≈95% capacity and 99.999% Coulombic efficiency over 300 cycles at 0.2 C. This study highlights the importance of integrating molecular and structural engineering for developing COF‐based SSEs in Li‐metal batteries.
- 5 October 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (47)
Open AccessRoom‐Temperature Single Li + Ion Conducting Organic Solid‐State Electrolyte with 10 −4 S cm −1 Conductivity for Lithium‐Metal Batteries
Covalent organic frameworks (COFs) are promising solid‐state electrolytes (SSEs) for lithium (Li)‐metal batteries due to their tunable structures, ordered nanochannels, and suppressed segmental motion, which support Li⁺ ion transport at ambient temperatures. However, pellet‐type COF‐based SSEs have exhibited low ionic conductivity, attributed to suboptimal ion transport pathways, limited crystallinity, and extensive grain boundary formation. Here, a 20 µm‐thick disulfonate‐functionalized COF (COF ds ) film is presented that achieves an ionic conductivity of 1.0 × 10 ‒4 S cm ‒1 at 25 °C. The integration of immobile disulfonate anions and carbonyl groups enables inter‐subchannel Li⁺ hopping with minimal spatial separation. Molecular dynamics (MD) simulations under applied fields confirm that the molecular design facilitates optimized Li⁺ conduction pathways. Solution‐phase synthesis enabled COF ds films with high crystallinity, uniform morphology, and smooth surfaces, which enhanced electrochemical performance. As a result, symmetric Li cells with the COF ds film showed stable cycling for over 1300 h at 25 °C, while full cells with LiFePO 4 cathodes retained ≈95% capacity and 99.999% Coulombic efficiency over 300 cycles at 0.2 C. This study highlights the importance of integrating molecular and structural engineering for developing COF‐based SSEs in Li‐metal batteries.
- Open Access
Correlative 3D Mapping of Structure, Composition, and Valence State Dynamics in Battery Cathodes via Simultaneous ADF-EDS-EELS Tomography
Understanding degradation in battery cathodes and other functional materials requires simultaneous knowledge of structural, chemical, and electronic changes in three dimensions (3D). Here, we present a simultaneous ADF-EDS-EELS tomography method that enables 3D mapping of atomic structure, composition, valence states, and transition metal inhomogeneity within a single, low-dose STEM tilt series acquisition. Applied to LiNi1/3Co1/3Mn1/3O2 (NCM111) particles at different electrochemical cycling stages, this method reveals nanoscale degradation processes with full spatial correlation. We observe that while chemical composition evolves uniformly throughout the entire primary particle, valence state changes and transition metal segregation are strongly depth-dependent and concentrated near the surface. This coexistence of bulk and surface-driven degradation dynamics reveals distinct mechanisms acting at different spatial scales. The evolution of inhomogeneity and valence states deviates from simple phase transition models, highlighting the roles of ion migration and dissolution-driven segregation. Our findings establish valence state gradients and nanoscale inhomogeneity as active contributors to cathode failure. More broadly, this correlative 3D platform opens new opportunities for studying redox-driven transformations in fields such as neuromorphic computing and heterogeneous catalysis, where composition-structure-function coupling is inherently three-dimensional.
Open AccessCorrelative 3D Mapping of Structure, Composition, and Valence State Dynamics in Battery Cathodes via Simultaneous ADF-EDS-EELS Tomography
Understanding degradation in battery cathodes and other functional materials requires simultaneous knowledge of structural, chemical, and electronic changes in three dimensions (3D). Here, we present a simultaneous ADF-EDS-EELS tomography method that enables 3D mapping of atomic structure, composition, valence states, and transition metal inhomogeneity within a single, low-dose STEM tilt series acquisition. Applied to LiNi1/3Co1/3Mn1/3O2 (NCM111) particles at different electrochemical cycling stages, this method reveals nanoscale degradation processes with full spatial correlation. We observe that while chemical composition evolves uniformly throughout the entire primary particle, valence state changes and transition metal segregation are strongly depth-dependent and concentrated near the surface. This coexistence of bulk and surface-driven degradation dynamics reveals distinct mechanisms acting at different spatial scales. The evolution of inhomogeneity and valence states deviates from simple phase transition models, highlighting the roles of ion migration and dissolution-driven segregation. Our findings establish valence state gradients and nanoscale inhomogeneity as active contributors to cathode failure. More broadly, this correlative 3D platform opens new opportunities for studying redox-driven transformations in fields such as neuromorphic computing and heterogeneous catalysis, where composition-structure-function coupling is inherently three-dimensional.
- 4 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Triazine-Functionalized Covalent Organic Framework Ultrathin Films for Enhancing Local CO2 Concentrations in Electrochemical CO2 Reduction
Electrochemical CO2 reduction (CO2R) with transition-metal catalysts often suffers from low selectivity for value-added products. Organic layers have been explored to enhance selectivity by modifying local environments and adjusting the CO2 and CO adsorption, but their role remains unclear due to structural and mechanical instability. Here, we designed a well-defined organic layer model consisting of ∼4 nm-thick covalent organic framework (COF) films with ∼3 nm pores and a cm2-scale area. The COF film, predominantly oriented along the (100) plane, restricted water access, while its triazine moieties enhanced local CO2 concentration through strong CO2 adsorption, improving Faradaic efficiencies with Au, Sn, and Cu. Notably, the suppressed deactivation of Cu was also demonstrated by COF, which exhibited a 2-fold increase in ethylene selectivity. Operando electrochemical spectroscopies and density functional theory (DFT) calculations reveal increased CO coverage and stronger binding of Cu to COF, promoting the formation of OCCOH and HOCCOH intermediates, key to ethylene formation.
- 4 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Triazine-Functionalized Covalent Organic Framework Ultrathin Films for Enhancing Local CO2 Concentrations in Electrochemical CO2 Reduction
Electrochemical CO2 reduction (CO2R) with transition-metal catalysts often suffers from low selectivity for value-added products. Organic layers have been explored to enhance selectivity by modifying local environments and adjusting the CO2 and CO adsorption, but their role remains unclear due to structural and mechanical instability. Here, we designed a well-defined organic layer model consisting of ∼4 nm-thick covalent organic framework (COF) films with ∼3 nm pores and a cm2-scale area. The COF film, predominantly oriented along the (100) plane, restricted water access, while its triazine moieties enhanced local CO2 concentration through strong CO2 adsorption, improving Faradaic efficiencies with Au, Sn, and Cu. Notably, the suppressed deactivation of Cu was also demonstrated by COF, which exhibited a 2-fold increase in ethylene selectivity. Operando electrochemical spectroscopies and density functional theory (DFT) calculations reveal increased CO coverage and stronger binding of Cu to COF, promoting the formation of OCCOH and HOCCOH intermediates, key to ethylene formation.