Vasantha Aravinthan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vasantha Aravinthan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Surachai Wongcharee
Field of Environmental Engineering, Faculty of Engineering, Mahasarakham University, Mahasarakham 44150, Thailand
4 shared publications - Laszlo Erdei
School of Civil Engineering and Surveying University of Southern Queensland Toowoomba QLD 4350 Australia
3 shared publications Javier Rioyo
2 shared publicationsJochen Bundschuh
2 shared publicationsM. A. Hoque
University of Southern Queensland (USQ)
2 shared publicationsMark Lynch
2 shared publications
Latest Publications
- 21 April 2019
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 55 (9) , 1636-1649
Application of mesoporous magnetic nanosorbent developed from macadamia nut shell residues for the removal of recalcitrant melanoidin and its fractions
A novel mesoporous magnetic nanosorbent developed from macadamia nut shell residues was applied as an adsorbent for the removal of dissolved organic carbon (DOC) associated with melanoidin and its fractions in a batch system. The most favored molecular fraction of the melanoidin for adsorption onto the nanosorbent was 1–5 kDa with adsorption capacity of 10.26 mg DOC g−1 achieving 68.4% removal efficiency. The sorption behaviors were all well fitted to a pseudo-second-order kinetic model and Langmuir isotherm. Optimum operating conditions needed for the maximum uptake of 14.7 mg DOC g−1 were found to be pH of 6.3, temperature of 41.7°C at the dosage of the magnetic nanosorbent of 877.7 ppm.
- 21 April 2019
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 55 (9) , 1636-1649
Application of mesoporous magnetic nanosorbent developed from macadamia nut shell residues for the removal of recalcitrant melanoidin and its fractions
A novel mesoporous magnetic nanosorbent developed from macadamia nut shell residues was applied as an adsorbent for the removal of dissolved organic carbon (DOC) associated with melanoidin and its fractions in a batch system. The most favored molecular fraction of the melanoidin for adsorption onto the nanosorbent was 1–5 kDa with adsorption capacity of 10.26 mg DOC g−1 achieving 68.4% removal efficiency. The sorption behaviors were all well fitted to a pseudo-second-order kinetic model and Langmuir isotherm. Optimum operating conditions needed for the maximum uptake of 14.7 mg DOC g−1 were found to be pH of 6.3, temperature of 41.7°C at the dosage of the magnetic nanosorbent of 877.7 ppm.
- 1 January 2019
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 27 (1) , 226-236
Mesoporous activated carbon-zeolite composite prepared from waste macadamia nut shell and synthetic faujasite
- 1 January 2019
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 27 (1) , 226-236
Mesoporous activated carbon-zeolite composite prepared from waste macadamia nut shell and synthetic faujasite
- 1 October 2018
- Published by Elsevier in Separation and Purification Technology
- Vol. 205, 308-316
‘High-pH softening pretreatment’ for boron removal in inland desalination systems
- 1 October 2018
- Published by Elsevier in Separation and Purification Technology
- Vol. 205, 308-316
‘High-pH softening pretreatment’ for boron removal in inland desalination systems
- 1 August 2018
- Published by Elsevier in Desalination
- Vol. 439, 168-178
Research on ‘high-pH precipitation treatment’ for RO concentrate minimization and salt recovery in a municipal groundwater desalination facility
- 1 August 2018
- Published by Elsevier in Desalination
- Vol. 439, 168-178
Research on ‘high-pH precipitation treatment’ for RO concentrate minimization and salt recovery in a municipal groundwater desalination facility
- 13 February 2018
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 13 (2)
Mesoporous activated carbon prepared from macadamia nut shell waste by carbon dioxide activation: Comparative characterisation and study of methylene blue removal from aqueous solution
Activated carbons are the most widely used adsorbents; however, producing high‐performance mesoporous activated carbons with simple technology still remains a challenge. In this research, waste macadamia nut shell (MNS) was explored as precursor for preparing mesoporous activated carbons by carbon dioxide activation. The material characteristics of MNS‐based activated carbon (MAC) were thoroughly examined in comparison with a premium‐grade commercial activated carbon (CAC). MAC and CAC had specific surface areas of 830 and 1,299 m2 g−1, respectively. Although CAC had a predominantly microporous structure, about 74% of the pore volume of MAC is composed of mesopores. Adsorption performances were evaluated in batch experiments using methylene blue model pollutant and demonstrated 135 and 181 mg g−1 saturation capacities for MAC and CAC, respectively. Non‐linear regression found that the fractal‐like pseudo first‐order model accurately described sorption kinetics, and intraparticle diffusion was the rate‐limiting step. Among 6 established isotherm models, the Liu equilibrium model showed the best statistics. Thermodynamic analysis verified that the process was favourable and involved physisorption. These results show that valuable mesoporous activated carbons can be prepared from the biowaste MNS with simple production technology to suit environmental and industrial applications.
- 13 February 2018
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 13 (2)
Mesoporous activated carbon prepared from macadamia nut shell waste by carbon dioxide activation: Comparative characterisation and study of methylene blue removal from aqueous solution
Activated carbons are the most widely used adsorbents; however, producing high‐performance mesoporous activated carbons with simple technology still remains a challenge. In this research, waste macadamia nut shell (MNS) was explored as precursor for preparing mesoporous activated carbons by carbon dioxide activation. The material characteristics of MNS‐based activated carbon (MAC) were thoroughly examined in comparison with a premium‐grade commercial activated carbon (CAC). MAC and CAC had specific surface areas of 830 and 1,299 m2 g−1, respectively. Although CAC had a predominantly microporous structure, about 74% of the pore volume of MAC is composed of mesopores. Adsorption performances were evaluated in batch experiments using methylene blue model pollutant and demonstrated 135 and 181 mg g−1 saturation capacities for MAC and CAC, respectively. Non‐linear regression found that the fractal‐like pseudo first‐order model accurately described sorption kinetics, and intraparticle diffusion was the rate‐limiting step. Among 6 established isotherm models, the Liu equilibrium model showed the best statistics. Thermodynamic analysis verified that the process was favourable and involved physisorption. These results show that valuable mesoporous activated carbons can be prepared from the biowaste MNS with simple production technology to suit environmental and industrial applications.
- 1 October 2017
- Published by Elsevier in International Biodeterioration & Biodegradation
- Vol. 124, 276-287
Use of macadamia nut shell residues as magnetic nanosorbents
- 1 October 2017
- Published by Elsevier in International Biodeterioration & Biodegradation
- Vol. 124, 276-287
Use of macadamia nut shell residues as magnetic nanosorbents
- Open Access
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (11) , 4769-4787
Investigating the feasibility and the optimal location of pulsed ultrasound in surface water treatment schemes
The deterioration of surface water quality due to extreme weather events and increasing human activities has exacerbated the common problems in drinking water production such as filtration fouling and DPBs formation. This in turn has urged for exploring alternative methods for the traditional treatment methods that are able to improve the removal of contaminants with minimal impact on environment and human health. In this study, the application of pulsed and continuous ultrasound for improving the quality of natural water with fresh natural organic matter (NOM) mainly driven from vegetation has been evaluated. The evaluation was performed using cost-effective and quick measurements such as specific UV–vis absorbance, CODMn, alkalinity and conductivity. The changes in the characteristics of NOM induced by ultrasound were used to develop a framework for evaluating ultrasound performance in improving conventional surface water treatment processes and to identify the best fit of ultrasound within the treatment scheme. Results of this study showed that pulsed ultrasound was as effective as or in some cases better than continuous ultrasound in improving water quality. According to the adapted assessment criteria supported by an extensive literature survey, the most effective location of ultrasound treatment within surface water treatment scheme was found to be prior to coagulation/flocculation.
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (11) , 4769-4787
Open AccessInvestigating the feasibility and the optimal location of pulsed ultrasound in surface water treatment schemes
The deterioration of surface water quality due to extreme weather events and increasing human activities has exacerbated the common problems in drinking water production such as filtration fouling and DPBs formation. This in turn has urged for exploring alternative methods for the traditional treatment methods that are able to improve the removal of contaminants with minimal impact on environment and human health. In this study, the application of pulsed and continuous ultrasound for improving the quality of natural water with fresh natural organic matter (NOM) mainly driven from vegetation has been evaluated. The evaluation was performed using cost-effective and quick measurements such as specific UV–vis absorbance, CODMn, alkalinity and conductivity. The changes in the characteristics of NOM induced by ultrasound were used to develop a framework for evaluating ultrasound performance in improving conventional surface water treatment processes and to identify the best fit of ultrasound within the treatment scheme. Results of this study showed that pulsed ultrasound was as effective as or in some cases better than continuous ultrasound in improving water quality. According to the adapted assessment criteria supported by an extensive literature survey, the most effective location of ultrasound treatment within surface water treatment scheme was found to be prior to coagulation/flocculation.
- Open Access
- 1 January 2014
- Published by Elsevier in Desalination and Water Treatment
- Vol. 52 (4-6) , 727-736
Nutrient removal of nursery and municipal wastewater using Chlorella vulgaris microalgae for lipid extraction
Microalgae grown in wastewater media can not only be exploited for the nutrient removal from the wastewater, but also for the production of biofuels. In this paper, we investigated the growth of Chlorella vulgaris in iceberg lettuce nursery and municipal wastewater in a batch reactor. We analyzed the microalgal growth rate, nutrient removal rate and lipid production along with real-time monitoring of pH and dissolved oxygen (DO) dynamics during the culture period, which is rarely reported. was found to be the preferred form of nitrogen among different species of nitrogen for the growth of microalgae, and total specific nitrogen depletion rates of 33.0 and 39.6 mg TN/gSS/d were observed for nursery and municipal wastewater, respectively. The specific phosphate removal rates were 3.4 and 10.8 mg /gSS/d for nursery and municipal wastewater, respectively. The algal growth in nutrient-rich media resulted in increase in pH and DO concentration concurrently. The online measurements including pH and DO proved to be real-time indicators of algal growth not only during the different stages of culture period but also during dark and light hours in a day indicating definite variations in measured values depicting the photosynthesis dynamics.
- 1 January 2014
- Published by Elsevier in Desalination and Water Treatment
- Vol. 52 (4-6) , 727-736
Open AccessNutrient removal of nursery and municipal wastewater using Chlorella vulgaris microalgae for lipid extraction
Microalgae grown in wastewater media can not only be exploited for the nutrient removal from the wastewater, but also for the production of biofuels. In this paper, we investigated the growth of Chlorella vulgaris in iceberg lettuce nursery and municipal wastewater in a batch reactor. We analyzed the microalgal growth rate, nutrient removal rate and lipid production along with real-time monitoring of pH and dissolved oxygen (DO) dynamics during the culture period, which is rarely reported. was found to be the preferred form of nitrogen among different species of nitrogen for the growth of microalgae, and total specific nitrogen depletion rates of 33.0 and 39.6 mg TN/gSS/d were observed for nursery and municipal wastewater, respectively. The specific phosphate removal rates were 3.4 and 10.8 mg /gSS/d for nursery and municipal wastewater, respectively. The algal growth in nutrient-rich media resulted in increase in pH and DO concentration concurrently. The online measurements including pH and DO proved to be real-time indicators of algal growth not only during the different stages of culture period but also during dark and light hours in a day indicating definite variations in measured values depicting the photosynthesis dynamics.
- 31 May 2011
- Published by Elsevier in Bioresource Technology
- Vol. 102 (9) , 5504-5513
Development and calibration of bio-kinetic model for surfactant biodegradation with combined respirometric and titrimetric measurements
- 31 May 2011
- Published by Elsevier in Bioresource Technology
- Vol. 102 (9) , 5504-5513
Development and calibration of bio-kinetic model for surfactant biodegradation with combined respirometric and titrimetric measurements
- 1 March 2010
- Published by Elsevier in Bioresource Technology
- Vol. 101 (5) , 1426-1434
Calibration of biokinetic model for acetate biodegradation using combined respirometric and titrimetric measurements
- 1 March 2010
- Published by Elsevier in Bioresource Technology
- Vol. 101 (5) , 1426-1434
Calibration of biokinetic model for acetate biodegradation using combined respirometric and titrimetric measurements