Christopher D. F. Honig
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christopher D. F. Honig has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
William A. Ducker
Virginia Tech 1 Department of Chemical Engineering Blacksburg, Virginia 24060, USA
6 shared publicationsJohn Y. Walz
Virginia Tech 1 Department of Chemical Engineering Blacksburg, Virginia 24060, USA
3 shared publications- Mark R. Paul
Department of Mechanical Engineering, Virginia Tech , Blacksburg, Virginia 24061
3 shared publications - Milad Radiom
Department of Health Sciences and Technology, ETH Zurich, Switzerland
3 shared publications - William A. Ducker
Department of Chemical Engineering
2 shared publications Adam P. Bowles
Department of Chemical Engineering, Virginia Tech, Blacksburg Virginia 24061, United States
1 shared publication
Latest Publications
- Open Access
- 6 November 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (6)
Is urine concentration by reverse osmosis economically viable for its reuse as fertiliser?
- 6 November 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (6)
Open AccessIs urine concentration by reverse osmosis economically viable for its reuse as fertiliser?
- Open Access
- 3 June 2025
- Published by Wiley in European Journal of Dental Education
- Vol. 30 (2) , 447-456
Artificial Intelligence Chatbots as Virtual Patients in Dental Education: A Constructivist Approach to Classroom Implementation
Introduction: Advances in artificial intelligence (AI) have led to new possibilities for AI role‐play in classroom settings, where generative pre‐trained transformers (GPTs) and chatbots can potentially simulate interactions with patients. This pilot study aimed to design an AI role‐play activity underpinned by constructivist principles, implement the activity in a classroom setting, and evaluate the students' engagement with the activity and usability of the interface. Materials and Methods: The AI role‐play was designed based on a patient presenting to a dental teaching hospital in pain. It comprised two interconnected chatbots intended to simulate a patient consultation and clinical supervisor discussion. The chatbots were built using the open‐source framework Streamlit and powered by Chat GPT‐4. Second and final‐year students from an oral health degree were recruited through convenience sampling. Classroom observations were recorded and final‐year students participated in a usability questionnaire to gain insights into their engagement, technical challenges, and suggestions for improvement. Data usage and token costs were collected to assess the AI chatbot's feasibility. Results: Educator observations noted that AI role‐play facilitated peer discussion, highlighted gaps in history‐taking, and promoted peer learning. Usability survey feedback ( n = 14) suggested that students perceived the AI role‐play as authentic and relevant to clinical practice, with 86% strongly agreeing it aligned with real‐world dental scenarios. The screen design, navigation, and multimedia integration were highly rated. The approximate costs for the activities were $13.17 (USD) for approximately 20 queries, per 20 students. Conclusion: This study presents a descriptive analysis of the implementation of an AI role‐play within the early phases of a design‐based research framework. AI role‐play activities can be implemented in a classroom setting and are perceived as useful for students to apply skills in taking a pain history. While results showed promise for scalability and authentic learning, future research evaluating the impact of the implementation of these activities on student learning should be explored.
- 3 June 2025
- Published by Wiley in European Journal of Dental Education
- Vol. 30 (2) , 447-456
Open AccessArtificial Intelligence Chatbots as Virtual Patients in Dental Education: A Constructivist Approach to Classroom Implementation
Introduction: Advances in artificial intelligence (AI) have led to new possibilities for AI role‐play in classroom settings, where generative pre‐trained transformers (GPTs) and chatbots can potentially simulate interactions with patients. This pilot study aimed to design an AI role‐play activity underpinned by constructivist principles, implement the activity in a classroom setting, and evaluate the students' engagement with the activity and usability of the interface. Materials and Methods: The AI role‐play was designed based on a patient presenting to a dental teaching hospital in pain. It comprised two interconnected chatbots intended to simulate a patient consultation and clinical supervisor discussion. The chatbots were built using the open‐source framework Streamlit and powered by Chat GPT‐4. Second and final‐year students from an oral health degree were recruited through convenience sampling. Classroom observations were recorded and final‐year students participated in a usability questionnaire to gain insights into their engagement, technical challenges, and suggestions for improvement. Data usage and token costs were collected to assess the AI chatbot's feasibility. Results: Educator observations noted that AI role‐play facilitated peer discussion, highlighted gaps in history‐taking, and promoted peer learning. Usability survey feedback ( n = 14) suggested that students perceived the AI role‐play as authentic and relevant to clinical practice, with 86% strongly agreeing it aligned with real‐world dental scenarios. The screen design, navigation, and multimedia integration were highly rated. The approximate costs for the activities were $13.17 (USD) for approximately 20 queries, per 20 students. Conclusion: This study presents a descriptive analysis of the implementation of an AI role‐play within the early phases of a design‐based research framework. AI role‐play activities can be implemented in a classroom setting and are perceived as useful for students to apply skills in taking a pain history. While results showed promise for scalability and authentic learning, future research evaluating the impact of the implementation of these activities on student learning should be explored.
- Top Cited PapersOpen Access
- 2 January 2025
- Published by Taylor & Francis in Australasian Journal of Engineering Education
- Vol. 30 (1) , 80-92
Generative AI in engineering education: understanding acceptance and use of new GPT teaching tools within a UTAUT framework
- 2 January 2025
- Published by Taylor & Francis in Australasian Journal of Engineering Education
- Vol. 30 (1) , 80-92
Top Cited PapersOpen AccessGenerative AI in engineering education: understanding acceptance and use of new GPT teaching tools within a UTAUT framework
- 2 January 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 113 (1) , 013503
A correlation force spectrometer for single molecule measurements under tensile load
The dynamical-mechanical properties of a small region of fluid can be measured using two closely spaced thermally stimulated micrometer-scale cantilevers. We call this technique correlation force spectroscopy (CFS). We describe an instrument that is designed for characterizing the extensional properties of polymer molecules that straddle the gap between the two cantilevers and use it to measure the stiffness and damping (molecular friction) of a dextran molecule. The device is based on a commercial atomic force microscope, into which we have incorporated a second antiparallel cantilever. The deflection of each cantilever is measured in the frequency range dc–1 MHz and is used to generate the cross-correlation at equilibrium. The main advantage of cross-correlation measurements is the reduction in thermal noise, which sets a fundamental noise limit to force resolution. We show that the thermal noise in our cross-correlation measurements is less than one third of the value for single-cantilever force microscopy. The dynamics of the cantilever pair is modeled using the deterministic motion of a harmonic oscillator initially displaced from equilibrium, which yields the equilibrium auto and cross-correlations in cantilever displacement via the fluctuation-dissipation theorem. Fitted parameters from the model (stiffness and damping) are used to characterize the fluid at equilibrium, including any straddling molecules.
- 2 January 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 113 (1) , 013503
A correlation force spectrometer for single molecule measurements under tensile load
The dynamical-mechanical properties of a small region of fluid can be measured using two closely spaced thermally stimulated micrometer-scale cantilevers. We call this technique correlation force spectroscopy (CFS). We describe an instrument that is designed for characterizing the extensional properties of polymer molecules that straddle the gap between the two cantilevers and use it to measure the stiffness and damping (molecular friction) of a dextran molecule. The device is based on a commercial atomic force microscope, into which we have incorporated a second antiparallel cantilever. The deflection of each cantilever is measured in the frequency range dc–1 MHz and is used to generate the cross-correlation at equilibrium. The main advantage of cross-correlation measurements is the reduction in thermal noise, which sets a fundamental noise limit to force resolution. We show that the thermal noise in our cross-correlation measurements is less than one third of the value for single-cantilever force microscopy. The dynamics of the cantilever pair is modeled using the deterministic motion of a harmonic oscillator initially displaced from equilibrium, which yields the equilibrium auto and cross-correlations in cantilever displacement via the fluctuation-dissipation theorem. Fitted parameters from the model (stiffness and damping) are used to characterize the fluid at equilibrium, including any straddling molecules.
- 1 April 2012
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 83 (4) , 043908
Rheology of fluids measured by correlation force spectroscopy
We describe a method, correlation force spectrometry (CFS), which characterizes fluids through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. We discuss a major application: measurement of the rheological properties of fluids at high frequency and high spatial resolution. Use of CFS as a rheometer is validated by comparison between experimental data and finite element modeling of the deterministic ring-down of cantilevers using the known viscosity of fluids. The data can also be accurately fitted using a harmonic oscillator model, which can be used for rapid rheometric measurements after calibration. The method is non-invasive, uses a very small amount of fluid, and has no actively moving parts. It can also be used to analyze the rheology of complex fluids. We use CFS to show that (non-Newtonian) aqueous polyethylene oxide solution can be modeled approximately by incorporating an elastic spring between the cantilevers.
- 1 April 2012
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 83 (4) , 043908
Rheology of fluids measured by correlation force spectroscopy
We describe a method, correlation force spectrometry (CFS), which characterizes fluids through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. We discuss a major application: measurement of the rheological properties of fluids at high frequency and high spatial resolution. Use of CFS as a rheometer is validated by comparison between experimental data and finite element modeling of the deterministic ring-down of cantilevers using the known viscosity of fluids. The data can also be accurately fitted using a harmonic oscillator model, which can be used for rapid rheometric measurements after calibration. The method is non-invasive, uses a very small amount of fluid, and has no actively moving parts. It can also be used to analyze the rheology of complex fluids. We use CFS to show that (non-Newtonian) aqueous polyethylene oxide solution can be modeled approximately by incorporating an elastic spring between the cantilevers.
- Open Access
- 30 January 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 100 (5) , 053121
Correlations between the thermal vibrations of two cantilevers: Validation of deterministic analysis via the fluctuation-dissipation theorem
We validate a theoretical approach for analyzing correlations in the fluctuations of two cantilevers in terms of a deterministic model, using the fluctuation-dissipation theorem [M. R. Paul and M. C. Cross, Phys. Rev. Lett. 92, 235501 (2004)]. The validation has been made possible through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. Validation of the theory enables development of a method for characterizing fluids, which we call correlation force spectrometry.
- 30 January 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 100 (5) , 053121
Open AccessCorrelations between the thermal vibrations of two cantilevers: Validation of deterministic analysis via the fluctuation-dissipation theorem
We validate a theoretical approach for analyzing correlations in the fluctuations of two cantilevers in terms of a deterministic model, using the fluctuation-dissipation theorem [M. R. Paul and M. C. Cross, Phys. Rev. Lett. 92, 235501 (2004)]. The validation has been made possible through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. Validation of the theory enables development of a method for characterizing fluids, which we call correlation force spectrometry.
- 30 June 2011
- Published by Oil Gas Scientific Research Project Institute in SOCAR Proceedings
- No. 3,p. 73-77
No-slip hydrodynamic boundary condition for hydrophilic particles
- 30 June 2011
- Published by Oil Gas Scientific Research Project Institute in SOCAR Proceedings
- No. 3,p. 73-77
No-slip hydrodynamic boundary condition for hydrophilic particles
- 13 April 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 115 (17) , 8613-8621
No-Slip Boundary Condition for Weak Solid−Liquid Interactions
- 13 April 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 115 (17) , 8613-8621
No-Slip Boundary Condition for Weak Solid−Liquid Interactions
- 9 November 2010
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 114 (47) , 20114-20119
Effect of Molecularly-Thin Films on Lubrication Forces and Accommodation Coefficients in Air
- 9 November 2010
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 114 (47) , 20114-20119
Effect of Molecularly-Thin Films on Lubrication Forces and Accommodation Coefficients in Air
- 6 May 2010
- Published by American Physical Society (APS) in Physical Review E
- Vol. 81 (5) , 056305
Lubrication forces in air and accommodation coefficient measured by a thermal damping method using an atomic force microscope
By analysis of the thermally driven oscillation of an atomic force microscope (AFM) cantilever, we have measured both the damping and static forces acting on a sphere near a flat plate immersed in gas. By varying the proximity of the sphere to the plate, we can continuously vary the Knudsen number (Kn) at constant pressure, thereby accessing the slip flow, transition, and molecular regimes at a single pressure. We use measurements in the slip-flow regime to determine the combined slip length (on both sphere and plate) and the tangential momentum accommodation coefficient, $\sigma${}. For ambient air at 1 atm between two methylated glass solids, the inverse damping is linear with separation and the combined slip length on both surfaces is 250$\hskip0.3em${}nm\ifmmode\pm\else\textpm\fi{}100$\hskip0.3em${}nm, which corresponds to $\sigma${}=0.77\ifmmode\pm\else\textpm\fi{}0.24. At small separations (Kn>0.4) the measured inverse damping is no longer linear with separation, and is observed to exhibit reasonable agreement with the Vinogradova formula.
- 6 May 2010
- Published by American Physical Society (APS) in Physical Review E
- Vol. 81 (5) , 056305
Lubrication forces in air and accommodation coefficient measured by a thermal damping method using an atomic force microscope
By analysis of the thermally driven oscillation of an atomic force microscope (AFM) cantilever, we have measured both the damping and static forces acting on a sphere near a flat plate immersed in gas. By varying the proximity of the sphere to the plate, we can continuously vary the Knudsen number (Kn) at constant pressure, thereby accessing the slip flow, transition, and molecular regimes at a single pressure. We use measurements in the slip-flow regime to determine the combined slip length (on both sphere and plate) and the tangential momentum accommodation coefficient, $\sigma${}. For ambient air at 1 atm between two methylated glass solids, the inverse damping is linear with separation and the combined slip length on both surfaces is 250$\hskip0.3em${}nm\ifmmode\pm\else\textpm\fi{}100$\hskip0.3em${}nm, which corresponds to $\sigma${}=0.77\ifmmode\pm\else\textpm\fi{}0.24. At small separations (Kn>0.4) the measured inverse damping is no longer linear with separation, and is observed to exhibit reasonable agreement with the Vinogradova formula.