Ana Beatriz Acevedo Jaramillo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ana Beatriz Acevedo Jaramillo has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Daniela González
Eafit University
2 shared publications- Juan Carlos Duque
Universidad Carlos III de Madrid Department of Business Administration
2 shared publications A. Prieto
1 shared publication- Albert Ricardo Ortiz
School of Civil Engineering and Geomatics, Universidad del Valle, Cali 760032, Colombia
1 shared publication Alejandra Clavijo
Department of Civil and Environmental Engineering Universidad de los Andes Bogotá Colombia
1 shared publicationAlejandro Betancourt
1 shared publication
Latest Publications
- 9 May 2026
- Published by Wiley in Earthquake Spectra
- Vol. 42 (2)
Exposure Model of Urban Residential Buildings for Seismic Risk Assessment of Prioritized Municipalities in Colombia
Seismic risk assessment is essential for disaster risk reduction and decision‐making processes in hazard‐prone regions. As part of the National Seismic Risk Model of Colombia, an exposure model for residential buildings was developed to support a standardized, nationwide framework for seismic risk evaluation. This paper presents the methodology and results of the exposure model developed for 83 prioritized municipalities across Colombia, offering census‐block level data for use in seismic risk assessments. The exposure model incorporates three critical dimensions: the location of assets associated with hazard levels, the damage propensity based on structural attributes such as construction material and number of stories, and the exposed value, including population and replacement cost. The methodology employed visual inspections and defined taxonomic classification schemes specific to Colombian building typologies, allowing for systematic categorization and extrapolation to other regions. Models were either updated from existing datasets, created anew, or guided by defined development protocols, ensuring internal consistency and future scalability. Key contributions include the development of harmonized, high‐resolution exposure models, the definition of standardized procedures for exposure data generation, and the public availability of these models for broader applications in risk management, multi‐hazard assessment, and policy planning. The work addresses a critical gap in seismic risk modeling by reducing reliance on expert judgment and enhancing the comparability and reliability of risk assessments. This methodological framework establishes a replicable approach for future model development within and beyond Colombia, contributing significantly to the global discourse on earthquake resilience and risk‐informed urban planning.
- 9 May 2026
- Published by Wiley in Earthquake Spectra
- Vol. 42 (2)
Exposure Model of Urban Residential Buildings for Seismic Risk Assessment of Prioritized Municipalities in Colombia
Seismic risk assessment is essential for disaster risk reduction and decision‐making processes in hazard‐prone regions. As part of the National Seismic Risk Model of Colombia, an exposure model for residential buildings was developed to support a standardized, nationwide framework for seismic risk evaluation. This paper presents the methodology and results of the exposure model developed for 83 prioritized municipalities across Colombia, offering census‐block level data for use in seismic risk assessments. The exposure model incorporates three critical dimensions: the location of assets associated with hazard levels, the damage propensity based on structural attributes such as construction material and number of stories, and the exposed value, including population and replacement cost. The methodology employed visual inspections and defined taxonomic classification schemes specific to Colombian building typologies, allowing for systematic categorization and extrapolation to other regions. Models were either updated from existing datasets, created anew, or guided by defined development protocols, ensuring internal consistency and future scalability. Key contributions include the development of harmonized, high‐resolution exposure models, the definition of standardized procedures for exposure data generation, and the public availability of these models for broader applications in risk management, multi‐hazard assessment, and policy planning. The work addresses a critical gap in seismic risk modeling by reducing reliance on expert judgment and enhancing the comparability and reliability of risk assessments. This methodological framework establishes a replicable approach for future model development within and beyond Colombia, contributing significantly to the global discourse on earthquake resilience and risk‐informed urban planning.
- Open Access
- 9 December 2025
- Published by Journal of Integrated Disaster Risk Management in IDRiM Journal
- Vol. 15 (2)
Am I at Risk if an Earthquake Occurs? An Initiative for Raising Seismic Risk Awareness and Knowledge Transferring in the Community
The assessment of seismic risk generates key information for disaster risk reduction and management (DRR). Nonetheless, for such knowledge to have an effective impact on DRR, collaborative efforts across all stakeholders are needed. Such efforts include risk knowledge transferring in such a way that final users can make risk-informed decisions. The challenge of knowledge transferring implies those who generate the knowledge (mainly researchers) to consider the needs of the potential users, among them the community. Among natural hazards, seismic activity, although not the most recurrent phenomenon, is one of the most catastrophic. Several efforts to increase seismic risk knowledge have been carried out at world, national and regional levels. Nowadays, seismic risk assessment follows a relatively established methodology which generates seismic risk metrics related to monetary, human and physical impact that are useful for DRR. Despite the advances on seismic risk knowledge, community seismic risk perception may significantly differ from the perception of those involved in DRR, especially in regions such as Colombia, where there has not been a devastating earthquake in the last two decades. Risk perception is not only influenced by direct information (i.e., having experienced a damaging earthquake); indirect experience gathered from the media and education is also fundamental. As an effort to increase community seismic risk perception, a seismic risk awareness workshop was designed and implemented by a collaborative effort between public and private institutions. The workshop generates a space for dialogue with the attendees to answer questions about earthquakes, the components of seismic risk and seismic risk management, among other relevant aspects. To share this activity, a workshop guide was developed, and videos were made focusing on Medellín and its metropolitan area and the city of Santiago de Cali (Colombia). The workshop has been offered since 2021, and it has been delivered to the community, students, children, decision-makers, among others. The execution of the workshop has allowed us to identify the attendees’ interest in topics related to seismic risk, concerns of the inhabitants with respect to the quality of the construction of their homes, interest in obtaining more information, and willingness to be informed on topics that usually do not include citizens due to its scientific complexity.
- 9 December 2025
- Published by Journal of Integrated Disaster Risk Management in IDRiM Journal
- Vol. 15 (2)
Open AccessAm I at Risk if an Earthquake Occurs? An Initiative for Raising Seismic Risk Awareness and Knowledge Transferring in the Community
The assessment of seismic risk generates key information for disaster risk reduction and management (DRR). Nonetheless, for such knowledge to have an effective impact on DRR, collaborative efforts across all stakeholders are needed. Such efforts include risk knowledge transferring in such a way that final users can make risk-informed decisions. The challenge of knowledge transferring implies those who generate the knowledge (mainly researchers) to consider the needs of the potential users, among them the community. Among natural hazards, seismic activity, although not the most recurrent phenomenon, is one of the most catastrophic. Several efforts to increase seismic risk knowledge have been carried out at world, national and regional levels. Nowadays, seismic risk assessment follows a relatively established methodology which generates seismic risk metrics related to monetary, human and physical impact that are useful for DRR. Despite the advances on seismic risk knowledge, community seismic risk perception may significantly differ from the perception of those involved in DRR, especially in regions such as Colombia, where there has not been a devastating earthquake in the last two decades. Risk perception is not only influenced by direct information (i.e., having experienced a damaging earthquake); indirect experience gathered from the media and education is also fundamental. As an effort to increase community seismic risk perception, a seismic risk awareness workshop was designed and implemented by a collaborative effort between public and private institutions. The workshop generates a space for dialogue with the attendees to answer questions about earthquakes, the components of seismic risk and seismic risk management, among other relevant aspects. To share this activity, a workshop guide was developed, and videos were made focusing on Medellín and its metropolitan area and the city of Santiago de Cali (Colombia). The workshop has been offered since 2021, and it has been delivered to the community, students, children, decision-makers, among others. The execution of the workshop has allowed us to identify the attendees’ interest in topics related to seismic risk, concerns of the inhabitants with respect to the quality of the construction of their homes, interest in obtaining more information, and willingness to be informed on topics that usually do not include citizens due to its scientific complexity.
- 19 June 2025
- Published by Wiley in Earthquake Spectra
- Vol. 41 (4) , 3074-3093
Influence of the spatial distribution of hazard and exposure models on urban seismic risk assessment
The large number of assets in urban centers often imposes computational limitations on the evaluation of the seismic risk, which are addressed by clustering the assets at given locations (exposure aggregation). Such aggregation implicitly involves modifications of the hazard calculations, as the site conditions are taken from the aggregation location. Previous studies that focused on the influence of exposure aggregation on risk loss estimates at different geographical levels indicate that the choice of aggregation can introduce bias into the results. This work presents complementary analyses to enhance the understanding of the influence of exposure aggregation on risk metrics at the urban level. Three municipalities of different sizes (6–133 km 2 ) with similar seismic hazard at rock conditions were considered in the analysis. Block-level exposure models that were developed as part of the Seismic Risk Model for Colombia (MNRS by its initialism in Spanish) were used as reference. These models were combined with the seismic hazard and the fragility/vulnerability functions used in the MNRS. In addition to the economic losses that are usually considered in seismic risk assessments, two parameters related to emergency response were included in the analyses: the number of buildings with complete damage and the number of fatalities. The risk metrics considered are average annual values (absolute values and their corresponding spatial distributions) and exceedance curves. The findings suggest that more evenly distributed aggregation units are preferable to geographical aggregation and that site conditions have a greater influence on exposure aggregation. The results also indicate that the average annual values alone are insufficient as a comparative measure, as they do not capture the spatial distribution of errors or the dispersion for different return periods.
- 19 June 2025
- Published by Wiley in Earthquake Spectra
- Vol. 41 (4) , 3074-3093
Influence of the spatial distribution of hazard and exposure models on urban seismic risk assessment
The large number of assets in urban centers often imposes computational limitations on the evaluation of the seismic risk, which are addressed by clustering the assets at given locations (exposure aggregation). Such aggregation implicitly involves modifications of the hazard calculations, as the site conditions are taken from the aggregation location. Previous studies that focused on the influence of exposure aggregation on risk loss estimates at different geographical levels indicate that the choice of aggregation can introduce bias into the results. This work presents complementary analyses to enhance the understanding of the influence of exposure aggregation on risk metrics at the urban level. Three municipalities of different sizes (6–133 km 2 ) with similar seismic hazard at rock conditions were considered in the analysis. Block-level exposure models that were developed as part of the Seismic Risk Model for Colombia (MNRS by its initialism in Spanish) were used as reference. These models were combined with the seismic hazard and the fragility/vulnerability functions used in the MNRS. In addition to the economic losses that are usually considered in seismic risk assessments, two parameters related to emergency response were included in the analyses: the number of buildings with complete damage and the number of fatalities. The risk metrics considered are average annual values (absolute values and their corresponding spatial distributions) and exceedance curves. The findings suggest that more evenly distributed aggregation units are preferable to geographical aggregation and that site conditions have a greater influence on exposure aggregation. The results also indicate that the average annual values alone are insufficient as a comparative measure, as they do not capture the spatial distribution of errors or the dispersion for different return periods.
- 12 April 2025
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 123
Understanding seismic risk in Santiago de Cali (Colombia) for its application in risk management
- 12 April 2025
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 123
Understanding seismic risk in Santiago de Cali (Colombia) for its application in risk management
- Open Access
- 12 December 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- p. 1-15
Experimental Evaluation of Brick Unreinforced Masonry Wall Out-of-Plane Capacity and Modeling Using the Yield Line Method
This paper presents a theoretical model to estimate the out-of-plane (OOP) force capacity of brick unreinforced masonry (URM) walls with strong units and weak joints by applying virtual work and yield line theories for homogeneous plates. The OOP force capacity of the wall was assessed by considering mechanical properties, support conditions, external axial load, and self-weight load. The ultimate vertical and horizontal moments were calculated according to displacement and force models, respectively, developed in previous works. These models consider wall and brick geometry, shear and compression stresses in the joint–brick interface, and support conditions of the wall. The theoretical model presented herein combines the previous models while adding the tensile strength ( $${f}_{mt}$$ ) of the mortar and assuming elastoplastic behavior of the ultimate moments in both directions. The proposed model constitutes a useful tool to assess the OOP force capacity of brick URM walls with one-way and two-way bending configurations. This paper presents results from experimental shaking table tests and test results from previously published works to validate the proposed model. The comparison between experimental and theoretical results revealed that the developed model predicts the OOP capacity if the appropriate information is available.- 12 December 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- p. 1-15
Open AccessExperimental Evaluation of Brick Unreinforced Masonry Wall Out-of-Plane Capacity and Modeling Using the Yield Line Method
This paper presents a theoretical model to estimate the out-of-plane (OOP) force capacity of brick unreinforced masonry (URM) walls with strong units and weak joints by applying virtual work and yield line theories for homogeneous plates. The OOP force capacity of the wall was assessed by considering mechanical properties, support conditions, external axial load, and self-weight load. The ultimate vertical and horizontal moments were calculated according to displacement and force models, respectively, developed in previous works. These models consider wall and brick geometry, shear and compression stresses in the joint–brick interface, and support conditions of the wall. The theoretical model presented herein combines the previous models while adding the tensile strength ( $${f}_{mt}$$ ) of the mortar and assuming elastoplastic behavior of the ultimate moments in both directions. The proposed model constitutes a useful tool to assess the OOP force capacity of brick URM walls with one-way and two-way bending configurations. This paper presents results from experimental shaking table tests and test results from previously published works to validate the proposed model. The comparison between experimental and theoretical results revealed that the developed model predicts the OOP capacity if the appropriate information is available. - 1 February 2021
- Published by Elsevier in Building and Environment
- Vol. 189
Use of deep learning models in street-level images to classify one-story unreinforced masonry buildings based on roof diaphragms
- 1 February 2021
- Published by Elsevier in Building and Environment
- Vol. 189
Use of deep learning models in street-level images to classify one-story unreinforced masonry buildings based on roof diaphragms
- Top Cited Papers
- 1 June 2020
- Published by Elsevier in Building and Environment
- Vol. 177
Automatic detection of building typology using deep learning methods on street level images
- 1 June 2020
- Published by Elsevier in Building and Environment
- Vol. 177
Top Cited PapersAutomatic detection of building typology using deep learning methods on street level images
- Open Access
- 28 June 2019
- Published by Universidad de Medellin in Revista Ingenierías Universidad de Medellín
- Vol. 18 (34) , 45-56
Polietileno tereftalato como reemplazo parcial del agregado fino en mezclas de concreto
Este artículo de investigación, financiado por la Universidad Eafit, presenta resultados experimentales en los que se evaluó la resistencia a la compresión y la manejabilidad de un concreto hecho con un reemplazo parcial del agregado fino por polietileno tereftalato (PET) reciclado. El reemplazo se realizó por volumen de modo que el espacio ocupado por las partículas de arena extraída lo ocuparan las partículas de PET. Se realizaron mezclas de concreto con reemplazo de arena de 0 % (referencia), 5 %, 10 %, 15 % y 20 %. Los resultados indican que aumentar el porcentaje de arena reemplazada disminuye la resistencia a la compresión, sin embargo, la manejabilidad no se ve afectada al conservar la curva granulométrica de los agregados. Se determinó el porcentaje de reemplazo del 15 % como el más adecuado ya que la manejabilidad es apropiada, se reemplaza una cantidad alta de arena y se presenta una disminución aceptable de resistencia a la compresión.
- 28 June 2019
- Published by Universidad de Medellin in Revista Ingenierías Universidad de Medellín
- Vol. 18 (34) , 45-56
Open AccessPolietileno tereftalato como reemplazo parcial del agregado fino en mezclas de concreto
Este artículo de investigación, financiado por la Universidad Eafit, presenta resultados experimentales en los que se evaluó la resistencia a la compresión y la manejabilidad de un concreto hecho con un reemplazo parcial del agregado fino por polietileno tereftalato (PET) reciclado. El reemplazo se realizó por volumen de modo que el espacio ocupado por las partículas de arena extraída lo ocuparan las partículas de PET. Se realizaron mezclas de concreto con reemplazo de arena de 0 % (referencia), 5 %, 10 %, 15 % y 20 %. Los resultados indican que aumentar el porcentaje de arena reemplazada disminuye la resistencia a la compresión, sin embargo, la manejabilidad no se ve afectada al conservar la curva granulométrica de los agregados. Se determinó el porcentaje de reemplazo del 15 % como el más adecuado ya que la manejabilidad es apropiada, se reemplaza una cantidad alta de arena y se presenta una disminución aceptable de resistencia a la compresión.
- 1 May 2018
- Published by Elsevier in Engineering Geology
- Vol. 239, 144-157
Development of structural debris flow fragility curves (debris flow buildings resistance) using momentum flux rate as a hazard parameter
- 1 May 2018
- Published by Elsevier in Engineering Geology
- Vol. 239, 144-157
Development of structural debris flow fragility curves (debris flow buildings resistance) using momentum flux rate as a hazard parameter
- Open Access
- 24 April 2017
- Published by Universidad EAFIT in Ingeniería y Ciencia
- Vol. 13 (25) , 209-227
Características estructurales de escuelas colombianas de hormigón reforzado con mampostería no reforzada
La evaluación de la vulnerabilidad sísmica del inventario de edificaciones de una región es de vital importancia para poder estimar el riesgo sísmico del lugar. Las escuelas constituyen una importante clase estructural porel alto número de personas que albergan, su rol social y la posibilidad de ser usadas como centros de atención en eventuales emergencias. En este artículo se presenta el análisis de las características de 77 edificios pertenecientes a 28 escuelas de los municipios de Medellín, Itagüí y Sabaneta(Colombia). Cada edificio es una estructura de pórticos de hormigón reforzado con muros de mampostería no reforzada. Dentro de los parámetros analizados se encuentra el número de pisos, altura de la edificación, área en planta, irregularidades en planta y en altura, presencia de columnas cortas, materiales de muros, dimensiones de columnas y muros, tipo desuelo, carga lateral de diseño, nivel de mantenimiento, año de construcción y existencia de daños o intervenciones de repotenciación. El análisis presentado constituye información valiosa que puede usarse para fines de estimación de la vulnerabilidad de este grupo estructural y, por lo tanto,de su riesgo sísmico.
- 24 April 2017
- Published by Universidad EAFIT in Ingeniería y Ciencia
- Vol. 13 (25) , 209-227
Open AccessCaracterísticas estructurales de escuelas colombianas de hormigón reforzado con mampostería no reforzada
La evaluación de la vulnerabilidad sísmica del inventario de edificaciones de una región es de vital importancia para poder estimar el riesgo sísmico del lugar. Las escuelas constituyen una importante clase estructural porel alto número de personas que albergan, su rol social y la posibilidad de ser usadas como centros de atención en eventuales emergencias. En este artículo se presenta el análisis de las características de 77 edificios pertenecientes a 28 escuelas de los municipios de Medellín, Itagüí y Sabaneta(Colombia). Cada edificio es una estructura de pórticos de hormigón reforzado con muros de mampostería no reforzada. Dentro de los parámetros analizados se encuentra el número de pisos, altura de la edificación, área en planta, irregularidades en planta y en altura, presencia de columnas cortas, materiales de muros, dimensiones de columnas y muros, tipo desuelo, carga lateral de diseño, nivel de mantenimiento, año de construcción y existencia de daños o intervenciones de repotenciación. El análisis presentado constituye información valiosa que puede usarse para fines de estimación de la vulnerabilidad de este grupo estructural y, por lo tanto,de su riesgo sísmico.