Metha Rutnakornpituk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Metha Rutnakornpituk has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
Boonjira Rutnakornpituk
Department of Chemistry and Center of Excellence in Biomaterials, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand
18 shared publicationsUthai Wichai
Department of Chemistry and Center of Excellence in Biomaterials, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand
14 shared publicationsBandit Thong-On
Department of Chemistry and Center of Excellence in Biomaterials, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand
4 shared publicationsNunthiya Deepuppha
Department of Chemistry and Center of Excellence in Biomaterials, Faculty of Science, Naresuan University, Phitsanulok, 65000, Thailand
4 shared publicationsTirayut Vilaivan
Organic Synthesis Research Unit, Department of Chemistry, Faculty of Science, Chulalongkorn University, Phayathai Road, Patumwan, Bangkok 10330, Thailand
4 shared publicationsUsana Mahanitipong
Department of Chemistry and Center of Excellence in Biomaterials, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand
4 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (27) , 40134-40150
Chain Length-Regulated Poly(styrene- co -maleic acid)/Lipid Nanostructures for Curcumin Encapsulation
- 25 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (27) , 40134-40150
Open AccessChain Length-Regulated Poly(styrene- co -maleic acid)/Lipid Nanostructures for Curcumin Encapsulation
- 10 June 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 318 (Pt 2) , 145183
Highly flexible thermoresponsive alginate-containing hydrogels: Curcuminoid encapsulation and its release kinetics and mechanism
- 10 June 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 318 (Pt 2) , 145183
Highly flexible thermoresponsive alginate-containing hydrogels: Curcuminoid encapsulation and its release kinetics and mechanism
- 13 March 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (9) , 1083-1095
Cu-immobilized cellulose filter paper: effect of polymer structure and functionality on catalytic activity and reusability for 4-nitrophenol reduction
- 13 March 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (9) , 1083-1095
Cu-immobilized cellulose filter paper: effect of polymer structure and functionality on catalytic activity and reusability for 4-nitrophenol reduction
- Open Access
- 15 February 2024
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 21 (4) , 7465
Highly Robust Alginate-based Magnetic Nanosorbents of Pd Catalysts for the 4-Nitrophenol Reduction
This work presents the synthesis of alginate-coated magnetite nanoparticle (MNP) containing amino-enriched moieties for the immobilization of palladium (Pd), and its use as a recyclable catalyst for the reduction of 4-nitrophenol (4NP) in water. The alginate grafted onto the surface of MNP contained carboxylate anions that served as coordination sites for Pd. Additionally, the incorporation of amino-enriched components, such as poly(vinyl amine) (PVAm) and 2-(dimethyl amino)ethyl methacrylate (DMAEMA), onto the alginate-coated MNPs resulted in additional interactions, including the formation of carboxylate-ammonium salts. In this study, the influence of these amino groups on the efficiency of Pd immobilization, catalytic activity and reusability of nanosorbents for 4NP reduction was investigated. The existence of Pd in the nanosorbents was detected by inductively coupled plasma atomic emission spectroscopy, transmission electron microscopy, and energy-dispersive X-ray techniques. The average size of MNPs was approximately 12.3 ± 2.9 nm, and for Pd, it was about 3.9 ± 0.8 nm. It was found that the incorporation of these amino-enriched moieties into the particles significantly enhanced the catalytic activity of the nanosorbents. Notably, MNP containing extended DMAEMA units exhibited excellent tolerance to 4NP reduction, with an insignificant loss of catalytic performance even after 20 consecutive reuses, maintaining a conversion of over 98 %. HIGHLIGHTS Synthesis of alginate-based magnetite nanoparticle for the immobilization of Pd and its use as a catalyst for the reduction of 4-nitrophenol in water were presented The carboxylate groups in alginate provided the coordinating sites for Pd immobilization and improved the particle dispersibility in water The incorporation of amino-enriched components to the particle reduced the degree of Pd aggregation on the particle surface The catalysts had high catalytic performance for the reduction of 4-nitrophenol in water and exhibited highly robust properties with excellent reusability for up to 20 cycles with insignificant changes in their performance GRAPHICAL ABSTRACT
- 15 February 2024
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 21 (4) , 7465
Open AccessHighly Robust Alginate-based Magnetic Nanosorbents of Pd Catalysts for the 4-Nitrophenol Reduction
This work presents the synthesis of alginate-coated magnetite nanoparticle (MNP) containing amino-enriched moieties for the immobilization of palladium (Pd), and its use as a recyclable catalyst for the reduction of 4-nitrophenol (4NP) in water. The alginate grafted onto the surface of MNP contained carboxylate anions that served as coordination sites for Pd. Additionally, the incorporation of amino-enriched components, such as poly(vinyl amine) (PVAm) and 2-(dimethyl amino)ethyl methacrylate (DMAEMA), onto the alginate-coated MNPs resulted in additional interactions, including the formation of carboxylate-ammonium salts. In this study, the influence of these amino groups on the efficiency of Pd immobilization, catalytic activity and reusability of nanosorbents for 4NP reduction was investigated. The existence of Pd in the nanosorbents was detected by inductively coupled plasma atomic emission spectroscopy, transmission electron microscopy, and energy-dispersive X-ray techniques. The average size of MNPs was approximately 12.3 ± 2.9 nm, and for Pd, it was about 3.9 ± 0.8 nm. It was found that the incorporation of these amino-enriched moieties into the particles significantly enhanced the catalytic activity of the nanosorbents. Notably, MNP containing extended DMAEMA units exhibited excellent tolerance to 4NP reduction, with an insignificant loss of catalytic performance even after 20 consecutive reuses, maintaining a conversion of over 98 %. HIGHLIGHTS Synthesis of alginate-based magnetite nanoparticle for the immobilization of Pd and its use as a catalyst for the reduction of 4-nitrophenol in water were presented The carboxylate groups in alginate provided the coordinating sites for Pd immobilization and improved the particle dispersibility in water The incorporation of amino-enriched components to the particle reduced the degree of Pd aggregation on the particle surface The catalysts had high catalytic performance for the reduction of 4-nitrophenol in water and exhibited highly robust properties with excellent reusability for up to 20 cycles with insignificant changes in their performance GRAPHICAL ABSTRACT
- 12 January 2024
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 73 (17) , 1461-1469
Anionic magnetic nanosorbents immobilized with peptide aptamer for selective adsorption with bisphenol A
- 12 January 2024
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 73 (17) , 1461-1469
Anionic magnetic nanosorbents immobilized with peptide aptamer for selective adsorption with bisphenol A
- Open Access
- 2 November 2023
- Published by Springer Nature in Discover Nano
- Vol. 18 (1) , 1-14
Anionic polymer-coated magnetic nanocomposites for immobilization with palladium nanoparticles as catalysts for the reduction of 4-nitrophenol
This study focuses on the synthesis of magnetite nanoparticles (MNP) coated with poly(poly(ethylene glycol) methacrylate) (PPEGMA) and/or poly(acrylic acid) (PAA) to anchor palladium nanoparticles (Pd) for their application as recyclable catalysts in the reduction of 4-nitrophenol (4NP). It was hypothesized that the abundance of oxygen atoms in PPEGMA enabled coordination with the Pd and provided good water dispersibility of the nanocomposites, while anionic PAA stabilized Pd and reduced the catalyst aggregation through electrostatic repulsion. Three different polymer coatings on MNP (PAA, PPEGMA, and PAA-co-PPEGMA polymers) were investigated to assess their influence on both the catalytic activity and reusability of the catalysts. Transmission electron microscopy (TEM) analysis indicated the distribution of spherical Pd nanoparticles (3–5 nm in diameter) and MNP (9–12 nm in diameter). Photocorrelation spectroscopy (PCS) revealed an average hydrodynamic size of the catalysts ranging from 540 to 875 nm in diameter, with a negative charge on their surface. The Pd content of the catalysts ranged from 4.30 to 6.33% w/w. The nanocomposites coated with PAA-co-PPEGMA polymers exhibited more favorable catalytic activity in the 4NP reduction than those coated with PAA or PPEGMA homopolymers. Interestingly, those containing PAA (e.g., PAA and PAA-co-PPEGMA polymers) exhibited good reusability for the 4NP reduction with a slight decrease in their catalytic performance after 26 cycles. This indicates the important role of carboxyl groups in PAA in maintaining high tolerance after multiple uses. Graphical abstract
- 2 November 2023
- Published by Springer Nature in Discover Nano
- Vol. 18 (1) , 1-14
Open AccessAnionic polymer-coated magnetic nanocomposites for immobilization with palladium nanoparticles as catalysts for the reduction of 4-nitrophenol
This study focuses on the synthesis of magnetite nanoparticles (MNP) coated with poly(poly(ethylene glycol) methacrylate) (PPEGMA) and/or poly(acrylic acid) (PAA) to anchor palladium nanoparticles (Pd) for their application as recyclable catalysts in the reduction of 4-nitrophenol (4NP). It was hypothesized that the abundance of oxygen atoms in PPEGMA enabled coordination with the Pd and provided good water dispersibility of the nanocomposites, while anionic PAA stabilized Pd and reduced the catalyst aggregation through electrostatic repulsion. Three different polymer coatings on MNP (PAA, PPEGMA, and PAA-co-PPEGMA polymers) were investigated to assess their influence on both the catalytic activity and reusability of the catalysts. Transmission electron microscopy (TEM) analysis indicated the distribution of spherical Pd nanoparticles (3–5 nm in diameter) and MNP (9–12 nm in diameter). Photocorrelation spectroscopy (PCS) revealed an average hydrodynamic size of the catalysts ranging from 540 to 875 nm in diameter, with a negative charge on their surface. The Pd content of the catalysts ranged from 4.30 to 6.33% w/w. The nanocomposites coated with PAA-co-PPEGMA polymers exhibited more favorable catalytic activity in the 4NP reduction than those coated with PAA or PPEGMA homopolymers. Interestingly, those containing PAA (e.g., PAA and PAA-co-PPEGMA polymers) exhibited good reusability for the 4NP reduction with a slight decrease in their catalytic performance after 26 cycles. This indicates the important role of carboxyl groups in PAA in maintaining high tolerance after multiple uses. Graphical abstract
- Open Access
- 12 April 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (16) , 14531-14540
Magnetite Nanoparticles Functionalized with Thermoresponsive Polymers as a Palladium Support for Olefin and Nitroarene Hydrogenation
- 12 April 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (16) , 14531-14540
Open AccessMagnetite Nanoparticles Functionalized with Thermoresponsive Polymers as a Palladium Support for Olefin and Nitroarene Hydrogenation
- Open Access
- 22 January 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (4) , 6145
Magnetic Nanoparticles Coated with Cationic Polymer and Label-Free Peptide Aptamer for Selective Adsorption with Bisphenol A
Magnetite nanoparticles coated with quaternized poly(diethylamino)ethyl methacrylate (PDEAEMA) (PQDEA@MNP) and functionalized with bisphenol A (BPA)-specific peptide aptamer (CKSLENSYC) were synthesized and used as nano-adsorbents for selective adsorption with BPA. The polymer coated on the particles provided their good stability and dispersibility in water, and the aptamer provided selective adsorption with BPA targets. Fourier transformed infrared spectrophotometry (FTIR), thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) techniques confirmed the presence of the polymer on the particle surface. From transmission electron microscopy (TEM) study, the particle size was ca.6 - 10 nm in diameter with some nanoclustering (30 - 60 nm in diameter of the nanoclusters). The selective adsorption of BPA on the particles was predominant over the non-specific adsorption when performed in PBS buffer (pH 10) in the presence of NaCl and tween-20. The nano-adsorbents had a good linearity range for the detection of BPA between 0.04 and 0.20 ppm with limit of detection (LOD) of 0.0145 ppm. They retained good BPA adsorption efficiency even when other interfering molecules were present. This simple measurement with the use of these nano-adsorbents without molecular labelling might be promising solid supports for use in various applications with good tolerance towards interfering molecules. HIGHLIGHTS Magnetic nanoparticle was coated with cationic polymer and BPA-specific aptamer This label-free peptide aptamer allowed for the selective capture of BPA targets It showed high selectivity to BPA capture and good tolerance to interfering molecules GRAPHICAL ABSTRACT
- 22 January 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (4) , 6145
Open AccessMagnetic Nanoparticles Coated with Cationic Polymer and Label-Free Peptide Aptamer for Selective Adsorption with Bisphenol A
Magnetite nanoparticles coated with quaternized poly(diethylamino)ethyl methacrylate (PDEAEMA) (PQDEA@MNP) and functionalized with bisphenol A (BPA)-specific peptide aptamer (CKSLENSYC) were synthesized and used as nano-adsorbents for selective adsorption with BPA. The polymer coated on the particles provided their good stability and dispersibility in water, and the aptamer provided selective adsorption with BPA targets. Fourier transformed infrared spectrophotometry (FTIR), thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) techniques confirmed the presence of the polymer on the particle surface. From transmission electron microscopy (TEM) study, the particle size was ca.6 - 10 nm in diameter with some nanoclustering (30 - 60 nm in diameter of the nanoclusters). The selective adsorption of BPA on the particles was predominant over the non-specific adsorption when performed in PBS buffer (pH 10) in the presence of NaCl and tween-20. The nano-adsorbents had a good linearity range for the detection of BPA between 0.04 and 0.20 ppm with limit of detection (LOD) of 0.0145 ppm. They retained good BPA adsorption efficiency even when other interfering molecules were present. This simple measurement with the use of these nano-adsorbents without molecular labelling might be promising solid supports for use in various applications with good tolerance towards interfering molecules. HIGHLIGHTS Magnetic nanoparticle was coated with cationic polymer and BPA-specific aptamer This label-free peptide aptamer allowed for the selective capture of BPA targets It showed high selectivity to BPA capture and good tolerance to interfering molecules GRAPHICAL ABSTRACT
- Open Access
- 5 January 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (3) , 6384
Fine-Tuning the Degree of Negative Charge and Carboxylate Grafting Density of Polymer-Coated Magnetite Nanoparticle
The surface of magnetite nanoparticle (MNP) was modified with poly(acrylic acid)(PAA)-poly(ethylene glycol) methyl methacrylate (PEGMA) (co)polymer to obtain water dispersible MNP with pH sensitive surfaces via atom transfer radical polymerization (ATRP) of tert-butyl acrylate (t-BA), followed by the t-BA group deprotection. Molar compositions of the (co)polymer were systematically varied, namely 100:0, 75:25, 50:50 and 25:75 of P(t-BA)/PEGMA, respectively, such that the grafting density of carboxylate groups on the MNP surface after the deprotection can be fine-tuned. Transmission electron microscopy (TEM) indicated that the MNP were spherical (ca.5-12 nm in diameter) with some nanoclustering observed. The roles of PAA and PEGMA affecting the hydrodynamic size and zeta potential of the nanocomposites observed via photocorrelation spectroscopy (PCS) were discussed. The percentages of the polymeric composition in the nanocomposites in each step of the reaction were determined via thermogravimetric analysis (TGA) and their magnetic properties were studied via vibrating sample magnetometry (VSM). These novel nanocomposites with pH sensitive surface and magnetically guidable properties might be advantageous for further conjugations either by covalent or ionic bonding with bioentities. HIGHLIGHTS GRAPHICAL ABSTRACT
- 5 January 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (3) , 6384
Open AccessFine-Tuning the Degree of Negative Charge and Carboxylate Grafting Density of Polymer-Coated Magnetite Nanoparticle
The surface of magnetite nanoparticle (MNP) was modified with poly(acrylic acid)(PAA)-poly(ethylene glycol) methyl methacrylate (PEGMA) (co)polymer to obtain water dispersible MNP with pH sensitive surfaces via atom transfer radical polymerization (ATRP) of tert-butyl acrylate (t-BA), followed by the t-BA group deprotection. Molar compositions of the (co)polymer were systematically varied, namely 100:0, 75:25, 50:50 and 25:75 of P(t-BA)/PEGMA, respectively, such that the grafting density of carboxylate groups on the MNP surface after the deprotection can be fine-tuned. Transmission electron microscopy (TEM) indicated that the MNP were spherical (ca.5-12 nm in diameter) with some nanoclustering observed. The roles of PAA and PEGMA affecting the hydrodynamic size and zeta potential of the nanocomposites observed via photocorrelation spectroscopy (PCS) were discussed. The percentages of the polymeric composition in the nanocomposites in each step of the reaction were determined via thermogravimetric analysis (TGA) and their magnetic properties were studied via vibrating sample magnetometry (VSM). These novel nanocomposites with pH sensitive surface and magnetically guidable properties might be advantageous for further conjugations either by covalent or ionic bonding with bioentities. HIGHLIGHTS GRAPHICAL ABSTRACT