SSSabina Spiga

Sabina Spiga

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sabina Spiga has a total of 445 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Engineering relaxation timescales in Ag/SiO x /Pt volatile memristors via a thin Al 2 O 3 layer

    by Andrea Bellingeri, Stefano Brivio, Sabina Spiga

    Neuromorphic computing, exploiting time as a computational variable, needs the development of devices able to show rich dynamics over various timescales. Volatile electrochemical metallization (ECM) memristive devices are among the most promising candidates for this role thanks to their tunable relaxation dynamics, showing retention times typically in the ns to ms range. This paper investigates the complex relaxation timescales of Ag/SiO x /Pt volatile ECM devices emerging from the addition of a few nm thick Al 2 O 3 layer at the active interface. We show that, upon the insertion of the alumina layer, retention time increases up to several seconds and can be further extended with repetition of programming stimulation through a cumulative effect. The accumulation effect is reversible provided that the device is given enough time to recover. In summary, the overall device relaxation is composed of three different timescales, that can be controlled with programming parameters and alumina layer thickness and that we relate to different physical processes inside the device. Intrinsic retention is related to partial filament disruption in pristine (or recovered) devices; cumulative retention is caused by the incomplete dissolution of the filament inside Al 2 O 3 which causes, cycle after cycle, an increase in the retention time; recovery time is needed to recover intrinsic state in a previously stimulated device, and it is related to the retraction of the filament in the Al 2 O 3 layer. The latter two relaxation timescales, typically not reported in literature, can be exploited to implement neuronal and synaptic primitives thanks to their integrative nature.

  • Open Access

    Memristive Chaotic Circuit for Information Processing Through Time

    by Manuel Escudero, Sabina Spiga, Stefano Brivio

    Human brain processes sensory information in real‐time with an efficiency that far exceeds the capabilities of current artificial computing systems. It operates as a complex nonlinear system, composed of interacting dynamic units—neurons and synapses—which process data‐streams as time goes by, i.e., through time, using time as an internal variable. Herein, the memristor‐based compact chaotic circuit incorporated in a computing architecture is presented, able to process information through time. A memristive hardware version of the formally simplest chaotic circuit has been realized, which, thanks to the nonlinearity of the nonvolatile memristor device, exhibits complex dynamics in response to a driving signal. This circuit is employed in a single‐node reservoir computing scheme to showcase nonlinear classification tasks and the processing of data streams through time. These results demonstrate that a simple memristor‐based chaotic circuit has the potential to operate as a computing system based on nonlinear dynamics and to process temporal information through time.


  • Top Cited Papers
    Open Access

    Roadmap to neuromorphic computing with emerging technologies

    by Adnan Mehonic, Daniele Ielmini, Kaushik Roy, Onur Mutlu, Shahar Kvatinsky, Teresa Serrano-Gotarredona, Bernabe Linares-Barranco, Sabina Spiga, Sergey Savel’eV, Alexander G. Balanov, et al.


  • Open Access

    Unraveling the Roles of Switching and Relaxation Times in Volatile Electrochemical Memristors to Mimic Neuromorphic Dynamical Features

    by Mrinmoy Dutta, Stefano Brivio, Sabina Spiga

    Computing through ensembles of interacting dynamical elements is the next frontier of the diverse field of neuromorphic computing. Spiking neural networks are one of the possible examples. Computation through dynamics and through time requires the development of novel technologies for devices with rich dynamics. Among the various candidates, the most promising ones are volatile electrochemical memristive systems that switch from high to low resistance state by voltage application and self‐recover the high resistance state after a tunable relaxation time. Such devices can perform a wide variety of computational primitives. However, a clear comprehensive picture of their possible dynamics and their physical interpretation is still missing. In the present manuscript, prototypical electrochemical silver/silicon oxide/platinum (Ag/SiOx/Pt) memristive devices are characterized to identify dynamical aspects, like integrative effects and stochastic switching. Integrative effects are evidenced both in high and low resistance states, associated to wake‐up phase and cumulative switching. All the dynamical aspects are related to characteristic switching times and relaxation times, and with reference to the electrochemical and physical processes involved in device operation. The various dynamical aspects are linked to short‐term memory effects and basic temporal processing functions based on paired‐pulse effects that are relevant for neuromorphic applications.


  • Open Access

    Modeling and simulation of electrochemical and surface diffusion effects in filamentary cation-based resistive memory devices

    by Francesco Vaccaro, Aurelio G. Mauri, Simona Perotto, Stefano Brivio, Sabina Spiga


  • Open Access

    Chua’s Circuit With Tunable Nonlinearity Based on a Nonvolatile Memristor: Design and Realization

    by Manuel Escudero, Sabina Spiga, Mauro Di Marco, Mauro Forti, Giacomo Innocenti, Alberto Tesi, Fernando Corinto, Stefano Brivio

    Nonvolatile memristive devices display nonlinear characteristics suitable for implementing circuits exhibiting oscillations or more complex dynamic behaviors, including chaos. However, the results presented in related works are mostly limited to simulations and employing ideal memristor models whose resistance is governed by a charge-flux relation that is not connected to real devices, thus hindering the realization of such nonlinear oscillators. In this work, we present the framework for the physical implementation of a tunable memristor Chua’s circuit, which is based on a nonvolatile memristive device that provides the nonlinear conductance required by the circuit and the possibility to tune it for the purpose of selecting among different oscillation patterns. We first establish design guidelines to guarantee complex oscillations in the tunable memristor Chua’s circuit. Further, we physically implement the circuit after characterizing and modeling the tunable current-voltage characteristic of a real device. Our circuit successfully generates different oscillation patterns just by programming the nonvolatile memristive device to different states. The devised design guidelines and device modeling were used to extend the experimental work and draw further requirements for device properties for a successful circuit implementation.


  • Open Access

    The 2022 applied physics by pioneering women: a roadmap

    by Begoña Abad, Kirstin Alberi, Katherine E Ayers, Sushmee Badhulika, Chunmei Ban, Hélène Béa, Fanny Béron, Julie Cairney, Jane P Chang, Christine Charles, et al.

    Women have made significant contributions to applied physics research and development, and their participation is vital to continued progress. Recognizing these contributions is important for encouraging increased involvement and creating an equitable environment in which women can thrive. This Roadmap on Women in Applied Physics, written by women scientists and engineers, is intended to celebrate women’s accomplishments, highlight established and early career researchers enlarging the boundaries in their respective fields, and promote increased visibility for the impact women have on applied physics research. Perspectives cover the topics of plasma materials processing and propulsion, super-resolution microscopy, bioelectronics, spintronics, superconducting quantum interference device technology, quantum materials, 2D materials, catalysis and surface science, fuel cells, batteries, photovoltaics, neuromorphic computing and devices, nanophotonics and nanophononics, and nanomagnetism. Our intent is to inspire more women to enter these fields and encourage an atmosphere of inclusion within the scientific community.


  • Open Access

    HfO2-based resistive switching memory devices for neuromorphic computing

    by S Brivio, S Spiga, D Ielmini

    HfO2-based resistive switching memory (RRAM) combines several outstanding properties, such as high scalability, fast switching speed, low power, compatibility with complementary metal-oxide-semiconductor technology, with possible high-density or three-dimensional integration. Therefore, today, HfO2 RRAMs have attracted a strong interest for applications in neuromorphic engineering, in particular for the development of artificial synapses in neural networks. This review provides an overview of the structure, the properties and the applications of HfO2-based RRAM in neuromorphic computing. Both widely investigated applications of nonvolatile devices and pioneering works about volatile devices are reviewed. The RRAM device is first introduced, describing the switching mechanisms associated to filamentary path of HfO2 defects such as oxygen vacancies. The RRAM programming algorithms are described for high-precision multilevel operation, analog weight update in synaptic applications and for exploiting the resistance dynamics of volatile devices. Finally, the neuromorphic applications are presented, illustrating both artificial neural networks with supervised training and with multilevel, binary or stochastic weights. Spiking neural networks are then presented for applications ranging from unsupervised training to spatio-temporal recognition. From this overview, HfO2-based RRAM appears as a mature technology for a broad range of neuromorphic computing systems.


  • The electrons' journey in thick metal oxides

    by Francesco Caruso, Paolo La Torraca, Luca Larcher, Graziella Tallarida, Sabina Spiga

    Originally introduced in electronic manufacturing to replace the SiO2 insulating layer, metal oxides are now extensively used in a multitude of electronic devices. Understanding charge transport mechanisms in metal oxides is of paramount importance for device optimization; however, a detailed and self-consistent discussion of electron conduction at all applied electric fields is lacking in the literature. In this work, we investigated the conduction mechanisms in three model systems, Al2O3, HfO2, and Al-doped HfO2 metal–insulator–metal capacitors, determining the path that the electrons travel within the metal oxide. Traps properties are extracted from experimental current–voltage characteristics using the Ginestra® simulation software. Furthermore, the analysis allowed to visualize the location of traps most involved in the conduction and the dominant transport mechanisms at each applied electric field. Despite the different oxide properties, a similar trend was recognized at low electric fields, the electron transport through the oxide is negligible, and the dominant contribution to the measured current is ascribed to the charge/discharge of traps located near the metal/oxide interfaces, leading to displacement currents. At high electric fields, the transport of electrons occurs through the defect rich oxides in the two following ways: if a large density of traps is energetically located near the electrodes Fermi level (as in HfO2), the electrons tunnel from trap to trap until they reach the anode; otherwise, when traps are closer to the conduction band (as in Al2O3 and AlHfO), the electrons tunnel from the cathode into one trap and then into the oxide conduction band, interacting only with traps near the cathode.


  • Open Access

    Physics-based compact modelling of the analog dynamics of HfO x resistive memories

    by Francesco Vaccaro, Stefano Brivio, Simona Perotto, Aurelio Giancarlo Mauri, Sabina Spiga

    Resistive random access memories (RRAMs) constitute a class of memristive devices particularly appealing for bio-inspired computing schemes. In particular, the possibility of achieving analog control of the electrical conductivity of RRAM devices can be exploited to mimic the behaviour of biological synapses in neuromorphic systems. With a view to neuromorphic computing applications, it turns out to be crucial to guarantee some features, among which a detailed device characterization, a mathematical modelling comprehensive of all the key features of the device both in quasi-static and dynamic conditions, a description of the variability due to the inherently stochasticity of the processes involved in the switching transitions. In this paper, starting from experimental data, we provide a modelling and simulation framework to reproduce the operative analog behaviour of HfO x -based RRAM devices under train of programming pulses both in the analog and binary operation mode. To this aim, we have calibrated the model by using a single set of parameters for the quasi-static current–voltage characteristics as well as switching kinetics and device dynamics. The physics-based compact model here settled captures the difference between the SET and the RESET processes in the I–V characteristics, as well as the device memory window both for strong and weak programming conditions. Moreover, the model reproduces the correct slopes of the highly non-linear kinetics curves over several orders of magnitudes in time, and the dynamic device response including the inherent device variability.