STSreenath Reddy Thummaluru

Sreenath Reddy Thummaluru

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sreenath Reddy Thummaluru has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unloaded wires-based simple biasing circuit for varactor-controlled metasurfaces

    by K. P. Navya, R. A. Srinethe, Sreenath Reddy Thummaluru, Machavaram V. Kartikeyan

    This paper introduces a varactor-loaded reconfigurable metasurface designed for discrete beam steering, a feature crucial for many applications such as smart radio environments. Initially, MATLAB is used to determine the meta-atom impedances that yield the desired reflection under normal incidence. Subsequently, capacitive-type meta-atoms are employed to achieve these impedances, which are then replaced with varactor diodes to create the reconfigurable metasurface. The unloaded wires are deliberately integrated into the same plane as the capacitively loaded meta-atoms to serve as biasing wires, allowing for changes in the capacitance of varactor diodes. This approach simplifies the design by eliminating the need for additional substrates for biasing circuitry. The proposed technique is tested on a two-bit reflective metasurface at 10 GHz and demonstrates promising beam- steering performance. The simulated results are confirmed by fabricating and testing the metasurface at different reflection angles.

  • Top-Loaded Circular Patch Log-Periodic Antenna for IEMI Sensing

    by Amiya Kumar Mondal, Sreenath Reddy Thummaluru, K. Premkumar, P. Prasanna Kumar, M. V. Kartikeyan

    This paper presents the top-loaded circular patch planar log periodic dipole array (PLPDA) antenna for detecting intentional electromagnetic interference (IEMI) within the 0.5 GHz to 2.0 GHz operating band. The dipoles of the traditional log periodic antenna have been modified using circular patches and achieved a compact design with dimensions of 25.5× 27×0.16 cm3. The modified designfs dimensions are 31.65 % and 15 % lower compared to conventional planar LPDA antenna along lateral and horizontal directions, respectively. Even with a compact size, the presented antenna gives good impedance matching with reflection coefficient |S11| less than -10 dB, a gain of 5±1 dB, 70 % radiation efficiency, and a stable radiation pattern with low cross polarizations. Considering such high performance with a compact size, the proposed antenna is well-suited for system-level integration as a non-powered passive sensor to detect the IEMI signals. At the end of the paper, the experiments relating to IEMI detection and their results are discussed to explain how


  • Ring Resonator Loaded Log-Periodic Antenna for IEMI Detection Application

    by Amiya Kumar Mondal, Sreenath Reddy Thummaluru, K. Premkumar, Prasanna Kumar, Prerna Saxena, M. V. Kartikeyan

    A patch added planar log periodic ring resonator meander dipole array (PPLPMDA) antenna having dimensions of 27× 27× 0.16 cm3 is developed to detect an intentional electromagnetic interference (IEMI) signal in the frequency range of 0.5 to 2GHz.A meander line concept has been utilized in the radiator section to lower the antenna size. The lateral dimension of the PPLPMDA antenna is smaller by 36.65% and the horizontal dimension is smaller by 10% compared to the conventional PLPDA antenna. The patches have been included for certain dipoles to get a high and nearly stable gain in the entire operating frequency range. The fabricated PPLPMDA antenna is tested in terms of S-parameters, far field radiation performance, IEMI sensing, etc., and witnessed a good agreement between simulation and measurement results. The measurements show that the PPLPMDA antenna has an average gain of 4.25 ± reflection coefficient |S11| ≤ 10dB, and stable radiation pattern. Compared to the existing designs, the proposed PPLPMDA antenna has a compact nature without sacrificing the far-field performance, which makes it more suitable for system-level integration as a non-powered passive sensor to detect IEMI signals.


  • Miniature Planar Log Periodic Dipole Array Antenna for IEMI Detection Application

    by Amiya Kumar Mondal, Prasanna Kumar, K. Premkumar, Sreenath Reddy Thummaluru, Prerna Saxena

    We propose a patch added folded dipole log periodic array (PFDLPA) antenna having dimensions $\text{30} \times \text{31} \times \text{0.16}$ cm $^{3}$ that operates in a frequency band of 0.5–2 GHz for detecting intentional electromagnetic interference (IEMI). The patches and the folded dipole structures improve impedance matching and provide a stable gain in the operating frequency band. The PFDLPA antenna is fabricated and tested, and the results from measurements agree well with simulations. From measurements, we see that PFDLPA has an average gain of 5.25 $\pm$ 1.25 dB, reflection coefficient $|S_{11}| \le$ −10 dB, and stable radiation pattern. Also, the lateral dimension of PFDLPA is less than that of conventional log periodic dipole array (LPDA) antenna by 21.52%. We compare PFDLPA with existing state-of-the-art designs and show that PFDLPA antenna is compact and has a better gain than LPDA, which makes it more suitable for system-level integration as a sensor for detecting IEMI signals. The proposed PFDLPA antenna with a signal analyzer demonstrates that the PFDLPA antenna can be used for receiving IEMI signals effectively for the safety of the critical infrastructure.


  • Open Access

    Frequency-Tunable SIW Band-Reject Filter with Increased Fundamental Mode Bandwidth for Spectrum Underlay Cognitive Radio

    by Sreenath Reddy Thummaluru, Rajkishor Kumar, Raghvendra Kumar Chaudhary

    This paper presents the design of a frequency-tunable substrate-integrated waveguide (SIW) band-reject filter, specifically for spectrum underlay cognitive radio operation. The proposed filter has a simple tuning circuit but provides a wide frequency tuning range from 2.9 to 4.4 GHz (41%). The second resonant mode has been suppressed using a simple quadrature coupling; hence, the fundamental mode bandwidth of the filter has been increased from 2.08 GHz to 3.36 GHz. Due to its wide tuning range, simple tuning circuit, and increased fundamental mode bandwidth, the proposed filter is greatly important in underlay cognitive radio construction. The second-order filter has also been developed, and its performance is analyzed with both simulation and measurement. It gives a tunable bandwidth of 41%, an insertion loss of more than 10 dB, and a fundamental mode bandwidth of 3.36 GHz. The filter performance is also analyzed after connecting it to the standard horn antenna. Finally, from the total efficiency plots, it has been concluded that the proposed filter achieves all the above advantages with a low-lossy nature.


  • Open Access

    A Miniaturized Dual-Band Short-Ended ZOR Antenna with Backed Ground Plane for Improved Bandwidth and Radiation Efficiency

    by Rajkishor Kumar, Avinash Chandra, Sreenath Reddy Thummaluru, Mohammad Monirujjaman Khan, Raghvendra Kumar Chaudhary

    This paper presents a miniaturized planar dual-band short-ended metamaterial antenna with the backed ground plane to improve antenna bandwidths and radiation characteristics. The proposed dual-band metamaterial (MTM) antenna has been made up of the composite right- or left-handed transmission line (CRLH-TL) concept. Here, the backed ground plane has been employed to generate an extra coupling capacitance (CC), which shifts the ZOR frequency in the lower band while also improving ZOR matching and increasing the impedance bandwidth of the higher-order mode. In this proposed MTM antenna, interdigital capacitance (IDC) has been used in place of a simple series gap, which shifts the higher-order impedance bandwidth into a lower frequency band for second-band Wi-MAX applications (3.33.7GHz). The proposed antenna offers a short-ended MTM, and hence the ZOR frequency is controlled by a series of LC lumped parameters. The proposed antenna offers dual-band behavior with measured 10dB impedance bandwidths of 5.55 and 41.57 at centered frequencies of 2.70GHz and 4.33GHz, respectively. The overall electrical size of the designed antenna is 0.225λ0×0.144λ0×0.0144λ0 at ZOR (f0=2.70GHz), where λ0 is the free space wavelength; therefore, it is applicable for different Wi-MAX application bands (2.52.7GHz/3.33.8GHz). Furthermore, the proposed dual-band MTM antenna provides compactness, low loss, stable gain, and radiation efficiency, and also offers omnidirectional radiation patterns in the E-plane and dipolar type radiation patterns in the H-plane, respectively.


  • Improved Multifunctional MIMO Cognitive Radio System for Integrated Interweave-Underlay Operations

    by Tanjir Alam, Sreenath Reddy Thummaluru, Raghvendra Kumar Chaudhary

    This article presents the design of an integrated system involving multiple-input–multiple-output (MIMO) and cognitive radio (CR) technologies for sub-6 GHz applications. Two types of CR techniques, i.e., interweave and underlay CR, have been discussed in this article. The design model has a four-port multifunctional MIMO antenna system involving lumped elements for three selectable operation choices. Based on the switching conditions, the MIMO antenna system can operate as a wideband antenna (for sensing purpose), or narrowband frequency tunable antenna (for communicating purpose in interweave CR), or a wideband antenna with frequency tunable band notch (for communicating purpose in underlay CR). The sensing frequency range is 2.45–5.3 GHz. The interweave CR communicating antenna frequency tuning range is 3.6–4.2 GHz. To cover the entire desired spectrum range, i.e., from 2.5 to 4.2 GHz, another four-port narrowband MIMO antenna system with resonance frequency tuning from 2.5–3.6 is designed on the other/backside of the substrate. In the underlay CR communicating antenna, the stopband frequency tuning range is 3.1–3.85 GHz. The complete structure is having dimensions of 110 $\times $ 70 $\times $ 1.52 mm 3 . The measurements are performed, and good matching is found between simulated and measured results.


  • A Compact Multilayer Triple-Band Circularly Polarized Antenna Using Anisotropic Polarization Converter

    by Mohammad Ameen, Sreenath Reddy Thummaluru, Raghvendra Kumar Chaudhary

    A compact multilayer antenna enabled with anisotropic linear-to-circular (LTC) polarization converter (PC) is investigated in this letter for triple-band circularly polarized (CP) operation. The intended circularly polarized antenna provides a miniaturized size of 0.27 λ 0 × 0.27 λ 0 × 0.10 λ 0 at 2.38 GHz. The fabricated CP antenna provides extended impedance bandwidths of 13.0%, 18.2%, and 14.7% at the center frequencies of 2.38, 3.44, and 5.5 GHz, respectively. The antenna provides an axial ratio (AR) bandwidths of 3.53%, 1.73%, and 13.62%, higher gain-to-area ratio of 28.91, 39.10, and 30.28 for the three bands. Moreover, the antenna provides positive gain values and AR <; 3 dB for theta = ±45°, ±46°, and ±32° and phi = 0° to 360° at 2.45, 3.52, and 5.65 GHz, respectively. Hence, the antenna is well suitable for small satellite applications.


  • Integration of MIMO and Cognitive Radio for Sub-6 GHz 5G Applications

    by Tanjir Alam, Sreenath Reddy Thummaluru, Raghvendra Kumar Chaudhary

    A multiple-input-multiple-output (MIMO) antenna system has been designed on a single substrate representing both types of cognitive radio (CR), i.e., interweave and underlay. The design consists of a four-port MIMO antenna for three selectable modes of the operation (modes). These modes are (i) wideband antenna, (ii) frequency tunable narrowband antenna, and (iii) wideband antenna with frequency tunable band notch. The first, second and third modes correspond to the sensing antenna, interweave CR communicating antenna, and underlay CR communicating antenna, respectively. These modes are achieved by incorporating multipurpose filters into the microstrip feed-line part of the four antenna ports. The MIMO antenna system is designed for 5G applications in sub-6 GHz band (2.50-4.20 GHz). In wideband mode, the four-port MIMO antenna has a sensing frequency range of 2.00-5.70 GHz. While in the second mode of operation, it exhibits narrowband frequency tunability from 3.21-4.00 GHz. Finally, in the third mode of operation, the band-notch frequency of the antenna is tunable from 3.37-4.00 GHz. The complete structure was fabricated on Rogers RO4350 substrate and the simulation results were verified by measurement.


  • Four-Port MIMO Cognitive Radio System for Midband 5G Applications

    by Sreenath Reddy Thummaluru, Mohammad Ameen, Raghvendra Kumar Chaudhary

    In this paper, a multifunctional reconfigurable filter which can work in three operating modes has been presented. The three operating modes are: all-pass filter, tunable bandpass filter, and tunable band reject filter. The developed filter has been integrated with an ultra-wideband antenna which results in a reconfigurable filtenna. Such four filtennas are arranged on a single substrate and sufficient isolation is maintained between them by using reflectors to form a four-port multiple-input-multiple-output (MIMO) filtenna which can work for Mid-band 5G cognitive radio (CR) applications. By controlling the operating modes of the filter, the final developed structure gives us sensing and communicating antennas for spectrum-interweave and spectrum-underlay CR. Simulated results have been validated by carrying out the measurement. MIMO performance of the proposed antenna has been evaluated by measuring ECC and found suitable for practical applications.