Mohammad Ahmadian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohammad Ahmadian has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Ali Fatehizadeh
School of Engineering, Edith Cowan University, Joondalup, WA, 6027, Australia
5 shared publications - Nader Yousefi
Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
4 shared publications - Ali Poormohammadi
Department of Nanomedicine, School of Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
3 shared publications - Mohammad Hassan Ehrampoush
Environmental Science and Technology Research Center, Department of Environmental Health Engineering, School of Public Health, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
3 shared publications Mohammad Malakootian
Environmental Health Engineering Research Center, Kerman University of Medical Sciences, Kerman, Iran; Department of Environmental Health, School of Public Health, Kerman University of Medical Sciences, Kerman, Iran
3 shared publicationsSajad Rahimi
Social Development and Health Promotion Research Center, Kermanshah University of Medical Sciences, Kermanshah, Iran
3 shared publications
Latest Publications
- Open Access
- 18 April 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (5) , 1-13
Enhanced removal of metronidazole from aqueous solutions via photo-Fenton-like process: efficiency, kinetics, and toxicity assessment
- 18 April 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (5) , 1-13
Open AccessEnhanced removal of metronidazole from aqueous solutions via photo-Fenton-like process: efficiency, kinetics, and toxicity assessment
- Open Access
- 13 August 2024
- Published by Springer Nature in Applied Water Science
- Vol. 14 (9) , 1-14
Photo-Fenton like catalyst system with CuCOFe2O4@AC nanoparticles for ciprofloxacin removal from aqueous solutions and effluent toxicity assessment by Escherichia coli and Enterococcus faecalis bacteria
- 13 August 2024
- Published by Springer Nature in Applied Water Science
- Vol. 14 (9) , 1-14
Open AccessPhoto-Fenton like catalyst system with CuCOFe2O4@AC nanoparticles for ciprofloxacin removal from aqueous solutions and effluent toxicity assessment by Escherichia coli and Enterococcus faecalis bacteria
- 23 October 2021
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 8 (4) , 245-255
Global evaluation of potentially harmful elements (PHEs) in potato and carrot irrigated by wastewater: A systematic review, meta-analysis, and health risk assessment
Background: We aimed to conduct a meta-analysis on the concentration of potentially harmful elements (PHEs) in carrots and potatoes irrigated by wastewater and estimate non-carcinogenic health risks among adult and children consumers. Methods: The health risk of PHEs concentration, including Pb, Cd, total Cr, Ni, Zn, Cu, and Fe, in the edible parts of carrot and potato irrigated by wastewater was investigated by a meta-analysis using a random-effects model (REM). Accordingly, the related articles were screened from international databases such as Scopus, Medline, and Embase. Results: The meta-analysis of 32 papers (38 studies) revealed that the rank order of the most accumulated PHEs in potato was Fe (86.54 mg/kg wet weight) > Zn (30.9 mg/kg wet weight) > Cu (13.7 mg/kg wet weight) > Ni (8.42 mg/kg wet weight) > Pb (5.56 mg/kg wet weight) > Cr (3.45 mg/kg wet weight) > Cd (0.58 mg/kg wet weight). This ranking for carrot was Fe (43.36 mg/kg wet weight) > Zn (36.29 mg/kg wet weight) > Ni (13.49 mg/kg wet weight) > Cu (9.79 mg/kg wet weight) > Pb (1.84 mg/kg wet weight) > Cr (1.05 mg/kg wet weight) > Cd (0.28 mg/kg wet weight). Total hazard quotient (THQ) of PHEs was higher than 1 for potato and carrot; its rank order for potato and carrot was Cu > Pb > Cd > Ni > Fe > Zn > Cr and Cd > Pb > Cu > Ni > Fe > Zn > Cr, respectively. The Cd, Pb, and Cu had also a considerable role for consumer health risk. Conclusion: According to the results, continuous monitor and control of wastewater treatment plants are necessary.
- 23 October 2021
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 8 (4) , 245-255
Global evaluation of potentially harmful elements (PHEs) in potato and carrot irrigated by wastewater: A systematic review, meta-analysis, and health risk assessment
Background: We aimed to conduct a meta-analysis on the concentration of potentially harmful elements (PHEs) in carrots and potatoes irrigated by wastewater and estimate non-carcinogenic health risks among adult and children consumers. Methods: The health risk of PHEs concentration, including Pb, Cd, total Cr, Ni, Zn, Cu, and Fe, in the edible parts of carrot and potato irrigated by wastewater was investigated by a meta-analysis using a random-effects model (REM). Accordingly, the related articles were screened from international databases such as Scopus, Medline, and Embase. Results: The meta-analysis of 32 papers (38 studies) revealed that the rank order of the most accumulated PHEs in potato was Fe (86.54 mg/kg wet weight) > Zn (30.9 mg/kg wet weight) > Cu (13.7 mg/kg wet weight) > Ni (8.42 mg/kg wet weight) > Pb (5.56 mg/kg wet weight) > Cr (3.45 mg/kg wet weight) > Cd (0.58 mg/kg wet weight). This ranking for carrot was Fe (43.36 mg/kg wet weight) > Zn (36.29 mg/kg wet weight) > Ni (13.49 mg/kg wet weight) > Cu (9.79 mg/kg wet weight) > Pb (1.84 mg/kg wet weight) > Cr (1.05 mg/kg wet weight) > Cd (0.28 mg/kg wet weight). Total hazard quotient (THQ) of PHEs was higher than 1 for potato and carrot; its rank order for potato and carrot was Cu > Pb > Cd > Ni > Fe > Zn > Cr and Cd > Pb > Cu > Ni > Fe > Zn > Cr, respectively. The Cd, Pb, and Cu had also a considerable role for consumer health risk. Conclusion: According to the results, continuous monitor and control of wastewater treatment plants are necessary.
- 1 August 2019
- Published by IWA Publishing in Water Science & Technology
- Vol. 80 (3) , 587-596
Removal of ciprofloxacin from aqueous solution by electro-activated persulfate oxidation using aluminum electrodes
The aim of this study was to determine the removal of ciprofloxacin (CIP) by the electro-persulfate (EC-PS) process using aluminum (Al) electrodes. The effects of variables including pH, contact time, PS concentration, initial CIP concentration and current density on the removal efficiency of CIP were studied. In order to determine the mechanisms of the EC-PS process, the radical scavenger tests, as well as energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FT-IR) were performed on the sludge. The results showed that the PS process alone had no effect on the CIP removal, and the EC process alone could remove 25% of CIP after 160 min. However, the EC-PS process under the optimum conditions: pH of 7, time of 40 min, current density of 2.75 mA/cm2, CIP concentration of 20 mg/L, and PS concentration of 0.84 mM removed 90% of CIP. The effect of the EC-PS process on the actual hospital wastewater was 81% in optimal conditions. The kinetic study also showed that the second-order kinetic model was the most consistent. The oxidation process during the initial contact was dominant in the EC-PS process and, over time, the EC process was dominant for CIP removal.
- 1 August 2019
- Published by IWA Publishing in Water Science & Technology
- Vol. 80 (3) , 587-596
Removal of ciprofloxacin from aqueous solution by electro-activated persulfate oxidation using aluminum electrodes
The aim of this study was to determine the removal of ciprofloxacin (CIP) by the electro-persulfate (EC-PS) process using aluminum (Al) electrodes. The effects of variables including pH, contact time, PS concentration, initial CIP concentration and current density on the removal efficiency of CIP were studied. In order to determine the mechanisms of the EC-PS process, the radical scavenger tests, as well as energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FT-IR) were performed on the sludge. The results showed that the PS process alone had no effect on the CIP removal, and the EC process alone could remove 25% of CIP after 160 min. However, the EC-PS process under the optimum conditions: pH of 7, time of 40 min, current density of 2.75 mA/cm2, CIP concentration of 20 mg/L, and PS concentration of 0.84 mM removed 90% of CIP. The effect of the EC-PS process on the actual hospital wastewater was 81% in optimal conditions. The kinetic study also showed that the second-order kinetic model was the most consistent. The oxidation process during the initial contact was dominant in the EC-PS process and, over time, the EC process was dominant for CIP removal.
- Open Access
- 8 July 2019
- Published by Springer Nature in Applied Water Science
- Vol. 9 (5) , 140
Ciprofloxacin removal by electro-activated persulfate in aqueous solution using iron electrodes
- 8 July 2019
- Published by Springer Nature in Applied Water Science
- Vol. 9 (5) , 140
Open AccessCiprofloxacin removal by electro-activated persulfate in aqueous solution using iron electrodes
- Open Access
- 7 March 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (5) , 963
Photo-Fenton like Catalyst System: Activated Carbon/CoFe2O4 Nanocomposite for Reactive Dye Removal from Textile Wastewater
The removal of dye from textile industry wastewater using a photo-Fenton like catalyst system was investigated wherein the removal efficiency of phenol and chemical oxygen demand (COD) was studied by varying various parameters of pH (3–11), reaction time (1–50 min), activated Carbon/CoFe2O4 (AC/CFO) nanocomposite dosage (0.1–0.9 g/L), and persulfate amount (1–9 mM/L). The highest removal rates of reactive red 198 and COD were found to be 100% and 98%, respectively, for real wastewater under the optimal conditions of pH = 6.5, AC/CFO nanocomposite dosage (0.3 g/L), reaction time, 25 min, and persulfate dose of 5 mM/L up on constant UV light irradiation (30 W) at ambient room temperature. The result showed that this system is a viable and highly efficient remediation protocol relative to other advanced oxidation processes; inexpensive nature, the ease of operation, use of earth-abundant materials, and reusability for removal of organic pollutants being the salient attributes.
- 7 March 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (5) , 963
Open AccessPhoto-Fenton like Catalyst System: Activated Carbon/CoFe2O4 Nanocomposite for Reactive Dye Removal from Textile Wastewater
The removal of dye from textile industry wastewater using a photo-Fenton like catalyst system was investigated wherein the removal efficiency of phenol and chemical oxygen demand (COD) was studied by varying various parameters of pH (3–11), reaction time (1–50 min), activated Carbon/CoFe2O4 (AC/CFO) nanocomposite dosage (0.1–0.9 g/L), and persulfate amount (1–9 mM/L). The highest removal rates of reactive red 198 and COD were found to be 100% and 98%, respectively, for real wastewater under the optimal conditions of pH = 6.5, AC/CFO nanocomposite dosage (0.3 g/L), reaction time, 25 min, and persulfate dose of 5 mM/L up on constant UV light irradiation (30 W) at ambient room temperature. The result showed that this system is a viable and highly efficient remediation protocol relative to other advanced oxidation processes; inexpensive nature, the ease of operation, use of earth-abundant materials, and reusability for removal of organic pollutants being the salient attributes.
- Open Access
- 1 May 2017
- Published by Elsevier in Saudi Journal of Biological Sciences
- Vol. 24 (4) , 749-759
Comparing the performance of granular coral limestone and Leca in adsorbing Acid Cyanine 5R from aqueous solution
- 1 May 2017
- Published by Elsevier in Saudi Journal of Biological Sciences
- Vol. 24 (4) , 749-759
Open AccessComparing the performance of granular coral limestone and Leca in adsorbing Acid Cyanine 5R from aqueous solution
- Open Access
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (42) , 19988-19995
Removal of phenol at high concentrations using UV/Persulfate from saline wastewater
This study investigated the degradation of phenol at high concentrations from saline wastewater using UV/Persulfate (UV/PS) in a bench scale reactor. The effect of operational variables such as PS concentration (50, 80, 100, 150, and 200 mM), solution pH (3, 7, and 10), initial phenol concentration (200, 450, 1,000, 1,500, and 2,000 mg/L), and NaCl concentration (30,000, 50,000, and 70,000 mg/L) were surveyed. The results revealed that maximum removal of phenol (91%) was obtained after 60 min of reaction at PS molar concentration of 150 mM. Also, changes in pH values had no significant effect on removal efficiency and had slightly greater removal at acidic pH, so pH 3 was selected as optimum. Phenol removal efficiency was increased from 91 to 93% with an increase in the NaCl concentration from 30,000 to 70,000 mg/L, respectively. In addition, phenol removal percentages decrease with an increase in the initial phenol concentration. Efficiency of PS and UV photolysis were 30 and 21%, respectively. The results showed that UV/PS process could be optimally used to remove phenol from saline wastewater and could be effective, economically and environmentally.
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (42) , 19988-19995
Open AccessRemoval of phenol at high concentrations using UV/Persulfate from saline wastewater
This study investigated the degradation of phenol at high concentrations from saline wastewater using UV/Persulfate (UV/PS) in a bench scale reactor. The effect of operational variables such as PS concentration (50, 80, 100, 150, and 200 mM), solution pH (3, 7, and 10), initial phenol concentration (200, 450, 1,000, 1,500, and 2,000 mg/L), and NaCl concentration (30,000, 50,000, and 70,000 mg/L) were surveyed. The results revealed that maximum removal of phenol (91%) was obtained after 60 min of reaction at PS molar concentration of 150 mM. Also, changes in pH values had no significant effect on removal efficiency and had slightly greater removal at acidic pH, so pH 3 was selected as optimum. Phenol removal efficiency was increased from 91 to 93% with an increase in the NaCl concentration from 30,000 to 70,000 mg/L, respectively. In addition, phenol removal percentages decrease with an increase in the initial phenol concentration. Efficiency of PS and UV photolysis were 30 and 21%, respectively. The results showed that UV/PS process could be optimally used to remove phenol from saline wastewater and could be effective, economically and environmentally.
- 10 February 2016
- Published by IWA Publishing in Journal of Water Reuse and Desalination
- Vol. 6 (4) , 574-582
Comparing the photocatalytic process efficiency using batch and tubular reactors in removal of methylene blue dye and COD from simulated textile wastewater
The aim of this study was photocatalytic degradation of methylene blue (MB) dye using titanium dioxide nanoparticles simulated using ultraviolet in batch and tubular reactors. In this study, the effect of different concentrations of titanium dioxide nanoparticles in the photocatalytic process on MB degradation was examined in batch and tubular reactors. The effect of dye concentration, titanium dioxide nanoparticle concentration and aeration level were examined on the process efficiency. Results showed that the removal of MB dye was directly related to the radiation time. The best removal efficiency of dye and chemical oxygen demand (COD) in the batch reactor was 100% and 42.2%, respectively, while it was 93% and 47.8% in the tubular reactor (in 1.2 g/L of titanium dioxide nanoparticles at 60 min). Moreover, as dye concentration increased, dye removal rate decreased. Making use of the batch model to remove dye and COD is more efficient and can be used on a larger scale due to the required removal efficiency and wastewater discharge standards.
- 10 February 2016
- Published by IWA Publishing in Journal of Water Reuse and Desalination
- Vol. 6 (4) , 574-582
Comparing the photocatalytic process efficiency using batch and tubular reactors in removal of methylene blue dye and COD from simulated textile wastewater
The aim of this study was photocatalytic degradation of methylene blue (MB) dye using titanium dioxide nanoparticles simulated using ultraviolet in batch and tubular reactors. In this study, the effect of different concentrations of titanium dioxide nanoparticles in the photocatalytic process on MB degradation was examined in batch and tubular reactors. The effect of dye concentration, titanium dioxide nanoparticle concentration and aeration level were examined on the process efficiency. Results showed that the removal of MB dye was directly related to the radiation time. The best removal efficiency of dye and chemical oxygen demand (COD) in the batch reactor was 100% and 42.2%, respectively, while it was 93% and 47.8% in the tubular reactor (in 1.2 g/L of titanium dioxide nanoparticles at 60 min). Moreover, as dye concentration increased, dye removal rate decreased. Making use of the batch model to remove dye and COD is more efficient and can be used on a larger scale due to the required removal efficiency and wastewater discharge standards.